| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: fix race between delayed_work() and ceph_monc_stop()
The way the delayed work is handled in ceph_monc_stop() is prone to
races with mon_fault() and possibly also finish_hunting(). Both of
these can requeue the delayed work which wouldn't be canceled by any of
the following code in case that happens after cancel_delayed_work_sync()
runs -- __close_session() doesn't mess with the delayed work in order
to avoid interfering with the hunting interval logic. This part was
missed in commit b5d91704f53e ("libceph: behave in mon_fault() if
cur_mon < 0") and use-after-free can still ensue on monc and objects
that hang off of it, with monc->auth and monc->monmap being
particularly susceptible to quickly being reused.
To fix this:
- clear monc->cur_mon and monc->hunting as part of closing the session
in ceph_monc_stop()
- bail from delayed_work() if monc->cur_mon is cleared, similar to how
it's done in mon_fault() and finish_hunting() (based on monc->hunting)
- call cancel_delayed_work_sync() after the session is closed |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pseries: Fix scv instruction crash with kexec
kexec on pseries disables AIL (reloc_on_exc), required for scv
instruction support, before other CPUs have been shut down. This means
they can execute scv instructions after AIL is disabled, which causes an
interrupt at an unexpected entry location that crashes the kernel.
Change the kexec sequence to disable AIL after other CPUs have been
brought down.
As a refresher, the real-mode scv interrupt vector is 0x17000, and the
fixed-location head code probably couldn't easily deal with implementing
such high addresses so it was just decided not to support that interrupt
at all. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: aead,cipher - zeroize key buffer after use
I.G 9.7.B for FIPS 140-3 specifies that variables temporarily holding
cryptographic information should be zeroized once they are no longer
needed. Accomplish this by using kfree_sensitive for buffers that
previously held the private key. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Using uninitialized value *size when calling amdgpu_vce_cs_reloc
Initialize the size before calling amdgpu_vce_cs_reloc, such as case 0x03000001.
V2: To really improve the handling we would actually
need to have a separate value of 0xffffffff.(Christian) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: replace skb_put with skb_put_zero
Avoid potentially reusing uninitialized data |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mv88e6xxx: Correct check for empty list
Since commit a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO
busses") mv88e6xxx_default_mdio_bus() has checked that the
return value of list_first_entry() is non-NULL.
This appears to be intended to guard against the list chip->mdios being
empty. However, it is not the correct check as the implementation of
list_first_entry is not designed to return NULL for empty lists.
Instead, use list_first_entry_or_null() which does return NULL if the
list is empty.
Flagged by Smatch.
Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-frontends: tda10048: Fix integer overflow
state->xtal_hz can be up to 16M, so it can overflow a 32 bit integer
when multiplied by pll_mfactor.
Create a new 64 bit variable to hold the calculations. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Avoid uninitialized value in BPF_CORE_READ_BITFIELD
[Changes from V1:
- Use a default branch in the switch statement to initialize `val'.]
GCC warns that `val' may be used uninitialized in the
BPF_CRE_READ_BITFIELD macro, defined in bpf_core_read.h as:
[...]
unsigned long long val; \
[...] \
switch (__CORE_RELO(s, field, BYTE_SIZE)) { \
case 1: val = *(const unsigned char *)p; break; \
case 2: val = *(const unsigned short *)p; break; \
case 4: val = *(const unsigned int *)p; break; \
case 8: val = *(const unsigned long long *)p; break; \
} \
[...]
val; \
} \
This patch adds a default entry in the switch statement that sets
`val' to zero in order to avoid the warning, and random values to be
used in case __builtin_preserve_field_info returns unexpected values
for BPF_FIELD_BYTE_SIZE.
Tested in bpf-next master.
No regressions. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: check validation of fault attrs in f2fs_build_fault_attr()
- It missed to check validation of fault attrs in parse_options(),
let's fix to add check condition in f2fs_build_fault_attr().
- Use f2fs_build_fault_attr() in __sbi_store() to clean up code. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Sanitise num_phys
Information is stored in mr_sas_port->phy_mask, values larger then size of
this field shouldn't be allowed. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pkey: Wipe sensitive data on failure
Wipe sensitive data from stack also if the copy_to_user() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp_metrics: validate source addr length
I don't see anything checking that TCP_METRICS_ATTR_SADDR_IPV4
is at least 4 bytes long, and the policy doesn't have an entry
for this attribute at all (neither does it for IPv6 but v6 is
manually validated). |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
When del_timer_sync() is called in an interrupt context it throws a warning
because of potential deadlock. The timer is used only to exit from
wait_for_completion() after a timeout so replacing the call with
wait_for_completion_timeout() allows to remove the problematic timer and
its related functions altogether. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix a possible leak when destroy a ctrl during qp establishment
In nvmet_sq_destroy we capture sq->ctrl early and if it is non-NULL we
know that a ctrl was allocated (in the admin connect request handler)
and we need to release pending AERs, clear ctrl->sqs and sq->ctrl
(for nvme-loop primarily), and drop the final reference on the ctrl.
However, a small window is possible where nvmet_sq_destroy starts (as
a result of the client giving up and disconnecting) concurrently with
the nvme admin connect cmd (which may be in an early stage). But *before*
kill_and_confirm of sq->ref (i.e. the admin connect managed to get an sq
live reference). In this case, sq->ctrl was allocated however after it was
captured in a local variable in nvmet_sq_destroy.
This prevented the final reference drop on the ctrl.
Solve this by re-capturing the sq->ctrl after all inflight request has
completed, where for sure sq->ctrl reference is final, and move forward
based on that.
This issue was observed in an environment with many hosts connecting
multiple ctrls simoutanuosly, creating a delay in allocating a ctrl
leading up to this race window. |
| In the Linux kernel, the following vulnerability has been resolved:
bnx2x: Fix multiple UBSAN array-index-out-of-bounds
Fix UBSAN warnings that occur when using a system with 32 physical
cpu cores or more, or when the user defines a number of Ethernet
queues greater than or equal to FP_SB_MAX_E1x using the num_queues
module parameter.
Currently there is a read/write out of bounds that occurs on the array
"struct stats_query_entry query" present inside the "bnx2x_fw_stats_req"
struct in "drivers/net/ethernet/broadcom/bnx2x/bnx2x.h".
Looking at the definition of the "struct stats_query_entry query" array:
struct stats_query_entry query[FP_SB_MAX_E1x+
BNX2X_FIRST_QUEUE_QUERY_IDX];
FP_SB_MAX_E1x is defined as the maximum number of fast path interrupts and
has a value of 16, while BNX2X_FIRST_QUEUE_QUERY_IDX has a value of 3
meaning the array has a total size of 19.
Since accesses to "struct stats_query_entry query" are offset-ted by
BNX2X_FIRST_QUEUE_QUERY_IDX, that means that the total number of Ethernet
queues should not exceed FP_SB_MAX_E1x (16). However one of these queues
is reserved for FCOE and thus the number of Ethernet queues should be set
to [FP_SB_MAX_E1x -1] (15) if FCOE is enabled or [FP_SB_MAX_E1x] (16) if
it is not.
This is also described in a comment in the source code in
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h just above the Macro definition
of FP_SB_MAX_E1x. Below is the part of this explanation that it important
for this patch
/*
* The total number of L2 queues, MSIX vectors and HW contexts (CIDs) is
* control by the number of fast-path status blocks supported by the
* device (HW/FW). Each fast-path status block (FP-SB) aka non-default
* status block represents an independent interrupts context that can
* serve a regular L2 networking queue. However special L2 queues such
* as the FCoE queue do not require a FP-SB and other components like
* the CNIC may consume FP-SB reducing the number of possible L2 queues
*
* If the maximum number of FP-SB available is X then:
* a. If CNIC is supported it consumes 1 FP-SB thus the max number of
* regular L2 queues is Y=X-1
* b. In MF mode the actual number of L2 queues is Y= (X-1/MF_factor)
* c. If the FCoE L2 queue is supported the actual number of L2 queues
* is Y+1
* d. The number of irqs (MSIX vectors) is either Y+1 (one extra for
* slow-path interrupts) or Y+2 if CNIC is supported (one additional
* FP interrupt context for the CNIC).
* e. The number of HW context (CID count) is always X or X+1 if FCoE
* L2 queue is supported. The cid for the FCoE L2 queue is always X.
*/
However this driver also supports NICs that use the E2 controller which can
handle more queues due to having more FP-SB represented by FP_SB_MAX_E2.
Looking at the commits when the E2 support was added, it was originally
using the E1x parameters: commit f2e0899f0f27 ("bnx2x: Add 57712 support").
Back then FP_SB_MAX_E2 was set to 16 the same as E1x. However the driver
was later updated to take full advantage of the E2 instead of having it be
limited to the capabilities of the E1x. But as far as we can tell, the
array "stats_query_entry query" was still limited to using the FP-SB
available to the E1x cards as part of an oversignt when the driver was
updated to take full advantage of the E2, and now with the driver being
aware of the greater queue size supported by E2 NICs, it causes the UBSAN
warnings seen in the stack traces below.
This patch increases the size of the "stats_query_entry query" array by
replacing FP_SB_MAX_E1x with FP_SB_MAX_E2 to be large enough to handle
both types of NICs.
Stack traces:
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1529:11
index 20 is out of range for type 'stats_query_entry [19]'
CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic
#202405052133
Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/debugfs - Fix debugfs uninit process issue
During the zip probe process, the debugfs failure does not stop
the probe. When debugfs initialization fails, jumping to the
error branch will also release regs, in addition to its own
rollback operation.
As a result, it may be released repeatedly during the regs
uninit process. Therefore, the null check needs to be added to
the regs uninit process. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/core: Implement a limit on UMAD receive List
The existing behavior of ib_umad, which maintains received MAD
packets in an unbounded list, poses a risk of uncontrolled growth.
As user-space applications extract packets from this list, the rate
of extraction may not match the rate of incoming packets, leading
to potential list overflow.
To address this, we introduce a limit to the size of the list. After
considering typical scenarios, such as OpenSM processing, which can
handle approximately 100k packets per second, and the 1-second retry
timeout for most packets, we set the list size limit to 200k. Packets
received beyond this limit are dropped, assuming they are likely timed
out by the time they are handled by user-space.
Notably, packets queued on the receive list due to reasons like
timed-out sends are preserved even when the list is full. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: E-switch, Create ingress ACL when needed
Currently, ingress acl is used for three features. It is created only
when vport metadata match and prio tag are enabled. But active-backup
lag mode also uses it. It is independent of vport metadata match and
prio tag. And vport metadata match can be disabled using the
following devlink command:
# devlink dev param set pci/0000:08:00.0 name esw_port_metadata \
value false cmode runtime
If ingress acl is not created, will hit panic when creating drop rule
for active-backup lag mode. If always create it, there will be about
5% performance degradation.
Fix it by creating ingress acl when needed. If esw_port_metadata is
true, ingress acl exists, then create drop rule using existing
ingress acl. If esw_port_metadata is false, create ingress acl and
then create drop rule. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: kexec: Avoid deadlock in kexec crash path
If the kexec crash code is called in the interrupt context, the
machine_kexec_mask_interrupts() function will trigger a deadlock while
trying to acquire the irqdesc spinlock and then deactivate irqchip in
irq_set_irqchip_state() function.
Unlike arm64, riscv only requires irq_eoi handler to complete EOI and
keeping irq_set_irqchip_state() will only leave this possible deadlock
without any use. So we simply remove it. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file
In case of invalid INI file mlxsw_linecard_types_init() deallocates memory
but doesn't reset pointer to NULL and returns 0. In case of any error
occurred after mlxsw_linecard_types_init() call, mlxsw_linecards_init()
calls mlxsw_linecard_types_fini() which performs memory deallocation again.
Add pointer reset to NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
