| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wcn36xx: Fix potential use-after-free in TX ack timer teardown
wcn36xx_dxe_deinit() tears down the TX ack timer with timer_delete(),
which only dequeues the timer and does not wait for a callback that is
already executing; the preceding free_irq() calls synchronize the
interrupt handlers only. The callback, wcn36xx_dxe_tx_timer(), can
therefore be running past the teardown and use the wcn freed along
with the ieee80211_hw in wcn36xx_remove(): it takes wcn->dxe_lock,
reads wcn->tx_ack_skb and passes wcn->hw to
ieee80211_tx_status_irqsafe().
Fix this by using timer_shutdown_sync(), which waits for a running
callback and also prevents the timer from being rearmed again. The
timer is set up again by wcn36xx_dxe_init() on the next start, so the
start/stop cycle is unaffected.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlegacy: fix broadcast stations deallocation
On the error path of __il4965_up(), il_dealloc_bcast_stations() clears
only IL_STA_UCODE_ACTIVE, leaving IL_STA_BCAST set. This causes the
same broadcast stations to be deallocated again by __il4965_down().
This can occur when RF_KILL is toggled during driver startup.
To fix clear the entire 'used' field, since we will not do any
other operations on the station. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: hsq: Fix use-after-free in retry work
mmc_hsq_pump_requests() queues retry_work when request_atomic() returns
-EBUSY; today sdhci-sprd is the only consumer that implements
request_atomic(). The work is embedded in a devm-allocated mmc_hsq, but
is never cancelled during driver removal. Work still pending at unbind
can therefore run after the devm allocation has been released and
dereference hsq->mmc and hsq->mrq.
Use devm_work_autocancel() to cancel and drain retry_work before the devm
allocation is released. By the time devres cleanup begins,
mmc_remove_host() has already stopped the host, so no new requests can
arm the work.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: core: Cancel SDIO IRQ work before freeing host
A host controller that uses sdio_signal_irq() schedules host->sdio_irq_work
from its interrupt handler. That work is only cancelled on the suspend
path (mmc_sdio_suspend()), not on the remove/free path, so a worker armed
just before the controller freed its IRQ can run after
mmc_host_classdev_release() has freed the host and dereference it through
container_of().
Cancel host->sdio_irq_work in mmc_free_host(), like the existing
host->detect drain added by commit 1036f69e2513 ("mmc: core: Cancel
delayed work before releasing host").
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: filemap: retain mapped dropbehind folios
Fault-around can map ready dropbehind folios without going through the
normal page-cache lookup that clears dropbehind. A mapping represents a
competing cached user, so retain the folio instead of forcibly unmapping
it when writeback completes.
For a mapped folio, folio_unmap_invalidate() can call
unmap_mapping_folio(), which takes i_mmap_rwsem and may sleep. Retaining
mapped folios avoids this path when folio_end_dropbehind() runs in
non-preemptible task context.
Tal was able to trigger a sleeping-in-atomic warning due to this [1].
Unmapped dropbehind folios continue through the existing invalidation path. |
| In the Linux kernel, the following vulnerability has been resolved:
memstick: ms_block: destroy io_queue workqueue on removal
msb_init_disk() creates the per-card ordered workqueue msb->io_queue with
alloc_ordered_workqueue(). It is torn down with destroy_workqueue() only
on the init error path; msb_remove() never destroys it. msb_stop() merely
flushes the queue, and neither msb_data_clear() nor put_disk() free it. As
a result every card insert/remove cycle leaks the workqueue and its
kworker, exhausting kernel memory over repeated cycles.
Destroy the workqueue in msb_remove() after the disk has been removed and
the queue drained. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: Fix v9fs_issue_write() to update i_size and remote_i_size
Fix v9fs_issue_write() to update i_size and remote_i_size to the new size
of the server file if we made it larger, using the start fpos and the count
returned by p9_client_write() to calculate the new minimum file size.
This assumes that if the 9P server makes a short write (say it hits
ENOSPC), a reduced count is returned. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: check ras and obj before dereference
nbio_v7_9_handle_ras_controller_intr_no_bifring() dereferences ras and obj
without checking either for NULL. Both amdgpu_ras_get_context() and
amdgpu_ras_find_obj() can return NULL, e.g. during the window between
adev->nbio.ras being set (early in amdgpu_ras_init(), by design, to
enable the fatal-error interrupt as soon as possible) and the PCIE_BIF
ras object actually being created in RAS late_init. Any interrupt in that
window crashes in hard-IRQ context.
This is analogous to commit d190b459b2a4 ("drm/amdgpu: the warning
dereferencing obj for nbio_v7_4"), which fixed the same issue in the
nbio_v7_4 handler.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
(cherry picked from commit c7071767a50a32ed727cf800ac84372429e3b4b3) |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: avoid conflicts with skb->decrypted and sk_validate_xmit_skb()
PSP conflicts with TLS ULP in its usage of both skb->decrypted and
sk->sk_validate_xmit_skb().
Make PSP mutually exclusive with TLS ULP, the only other user of either
of these. As other users of skb->decrypted come along, they can be added
to sk_has_decrypt_user(). It would make sense to also assert that
sk->sk_validate_xmit_skb() is also NULL in both of these setup paths for
similar future proofing, but the PSP listener/sk_clone() path is still
broken and it could be seen as a regression to not allow rx assoc to run
on a child of a listener socket with PSP tx assoc state.
Include all TCP ULPs in the sk_has_decrypt_user() check, even though TLS
is the only one that conflicts with PSP via the decrypted bit. This is
intentional because PSP was not designed to be used with ULPs. It is
best to close off surface area that may make bugs reachable, until
someone wishes to design and test an actual user of PSP with ULPs. |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: use timer_shutdown_sync() to prevent timer rearming during teardown
In drop_monitor teardown paths (net_dm_trace_off_set(),
net_dm_hw_monitor_stop(), and error unwind paths in net_dm_trace_on_set()
and net_dm_hw_monitor_start()), per-CPU timers are stopped using
timer_delete_sync() followed by cancel_work_sync().
However, there is a circular dependency between send_timer and
dm_alert_work:
1) sched_send_work() (timer callback) schedules dm_alert_work.
2) send_dm_alert() / net_dm_hw_summary_work() calls reset_per_cpu_data()
or net_dm_hw_reset_per_cpu_data().
3) If memory allocation fails under memory pressure in the reset
function, it re-arms the timer via mod_timer(&data->send_timer, ...).
If dm_alert_work is running concurrently while timer_delete_sync()
executes on another CPU, an allocation failure in the worker will
re-arm the timer after timer_delete_sync() has already returned.
Once cancel_work_sync() completes and module_put() is called, the timer
remains active in the timer wheel. If the module is then unloaded, the
timer will fire and execute sched_send_work() in freed memory,
triggering a kernel panic / use-after-free.
Switch from timer_delete_sync() to timer_shutdown_sync(). This guarantees
that any in-flight timer handler has finished and prevents subsequent
re-arming attempts from running workers from succeeding. When monitoring
is restarted later, timer_setup() is invoked, which cleanly
re-initializes the timer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mst: move switchdev call outside rcu
This is a follow-up of one of sashiko's pre-existing bug reports.
br_mst_set_state() calls switchdev_port_attr_set() for nonzero MSTIs
while holding rcu_read_lock() which invokes the blocking switchdev
notifier chain and may sleep. Nonzero MSTI changes come from netlink
with rtnl held. Move the switchdev call before entering the rcu section and
assert that rtnl is held.
The call cannot be deferred because netlink needs its error and extack.
Also DSA reads the old bridge MST state during the callback and checks it.
A deferred callback will be late and will see the updated state. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: reject RTN_UNREACHABLE input routes in icmp_route_lookup
When the forward output route cannot be used in icmp_route_lookup(),
it enters the "reverse path" and calls ip_route_input() on fl4_dec.daddr,
the original packet's source address.
ip_route_input() only returns an error for truly invalid packets. For
unreachable addresses it will succeed and return an input route whose
dst.output is set to ip_rt_bug(). The existing check only rejects
RTN_LOCAL routes, so the RTN_UNREACHABLE route types can still be returned
and later used for output, syzkaller triggering a WARN_ON_ONCE()
in ip_rt_bug() as bellow:
------------[ cut here ]------------
WARNING: net/ipv4/route.c:1273 at ip_rt_bug+0x14/0x20
RIP: 0010:ip_rt_bug+0x14/0x20
Call Trace:
ip_push_pending_frames+0xfa/0x100
__icmp_send+0x905/0xf10
ip_options_compile+0xc0/0xd0
ip_rcv_finish_core+0x321/0xae0
ip_rcv+0x1de/0x260
__netif_receive_skb_one_core+0x11a/0x130
netif_receive_skb+0x7b/0x260
tun_get_user+0x11bf/0x1c10
------------[ cut here ]------------
Reject input route that is RTN_UNREACHABLE to fix it. The net warning
is only printed for RTN_LOCAL, as RTN_UNREACHABLE is not the result of
a race condition. |
| In wacom_hid_set_device_mode of wacom_sys.c, there is a possible out-of-bounds write due to a missing bounds check. This could lead to physical escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Use after free in Metrics in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Race condition in Fonts in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| The Gitea push mirror API checked whether the repository owner, instead of the requesting user, may use local file system paths. On instances with `[security] IMPORT_LOCAL_PATHS = true`, a repository administrator who is not allowed to import local paths could add a push mirror to a local path on the server when the repository owner has that permission. Gitea then pushed the repository's refs into an existing Git repository at that path with the permissions of the Gitea process. |
| The Gitea API endpoint for creating push mirrors (`POST /api/v1/repos/{owner}/{repo}/push_mirrors`) checked only whether mirroring was enabled and not the `[mirror] DISABLE_NEW_PUSH` setting that the web interface enforces. A repository administrator could therefore create new push mirrors on instances where the site administrator had disabled them. A push mirror pushes all refs of the repository to a remote chosen by the caller, on each commit or on a schedule. |
| Backstage is an open framework for building developer portals. Prior to 4.1.0, the @backstage/plugin-scaffolder-backend package could expose secret-derived values in Scaffolder task logs. Deployments that configure sensitive scaffolder.defaultEnvironment.secrets and allow an attacker to create or modify Scaffolder templates are affected. A template author could cause secret-derived values used during template iteration to be persisted and exposed to users who can access the resulting task logs. This issue is fixed in version 4.1.0. |
| Backstage is an open framework for building developer portals. Prior to 3.3.1, 3.4.1, 4.0.3 and 4.1.0, the @backstage/plugin-scaffolder-backend package is affected by improper task state validation in scaffolder backend. An authenticated user with permission to create and access Scaffolder tasks may, under specific timing and deployment conditions, affect files accessible to the Backstage backend. If backend application files are writable, the confidentiality, integrity, and availability of the backend may be compromised. This issue is fixed in versions 3.3.1, 3.4.1, 4.0.3 and 4.1.0. |
| Backstage is an open framework for building developer portals. Prior to 3.3.1, 3.4.1, 4.0.3 and 4.1.0, the @backstage/plugin-scaffolder-backend package is affected by sensitive information exposure in scaffolder. An authenticated Backstage user who can read another user's Scaffolder task may receive internal execution data. In deployments where that data contains credentials for an external service, this may permit disclosure and unauthorized changes in that external service. This issue is fixed in versions 3.3.1, 3.4.1, 4.0.3 and 4.1.0. |
