| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/io-pgtable-arm: fix size_t signedness bug in unmap path
__arm_lpae_unmap() returns size_t but was returning -ENOENT (negative
error code) when encountering an unmapped PTE. Since size_t is unsigned,
-ENOENT (typically -2) becomes a huge positive value (0xFFFFFFFFFFFFFFFE
on 64-bit systems).
This corrupted value propagates through the call chain:
__arm_lpae_unmap() returns -ENOENT as size_t
-> arm_lpae_unmap_pages() returns it
-> __iommu_unmap() adds it to iova address
-> iommu_pgsize() triggers BUG_ON due to corrupted iova
This can cause IOVA address overflow in __iommu_unmap() loop and
trigger BUG_ON in iommu_pgsize() from invalid address alignment.
Fix by returning 0 instead of -ENOENT. The WARN_ON already signals
the error condition, and returning 0 (meaning "nothing unmapped")
is the correct semantic for size_t return type. This matches the
behavior of other io-pgtable implementations (io-pgtable-arm-v7s,
io-pgtable-dart) which return 0 on error conditions. |
| In the Linux kernel, the following vulnerability has been resolved:
can: esd_usb: esd_usb_read_bulk_callback(): fix URB memory leak
Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In esd_usb_open(), the URBs for USB-in transfers are allocated, added to
the dev->rx_submitted anchor and submitted. In the complete callback
esd_usb_read_bulk_callback(), the URBs are processed and resubmitted. In
esd_usb_close() the URBs are freed by calling
usb_kill_anchored_urbs(&dev->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in esd_usb_close().
Fix the memory leak by anchoring the URB in the
esd_usb_read_bulk_callback() to the dev->rx_submitted anchor. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Avoid truncating memory addresses
On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem
allocations to be backed by addresses physical memory above the 32-bit
address limit, as found while experimenting with larger VMSPLIT
configurations.
This caused the qemu virt model to crash in the GICv3 driver, which
allocates the 'itt' object using GFP_KERNEL. Since all memory below
the 4GB physical address limit is in ZONE_DMA in this configuration,
kmalloc() defaults to higher addresses for ZONE_NORMAL, and the
ITS driver stores the physical address in a 32-bit 'unsigned long'
variable.
Change the itt_addr variable to the correct phys_addr_t type instead,
along with all other variables in this driver that hold a physical
address.
The gicv5 driver correctly uses u64 variables, while all other irqchip
drivers don't call virt_to_phys or similar interfaces. It's expected that
other device drivers have similar issues, but fixing this one is
sufficient for booting a virtio based guest. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix use-after-free in snd_usb_mixer_free()
When snd_usb_create_mixer() fails, snd_usb_mixer_free() frees
mixer->id_elems but the controls already added to the card still
reference the freed memory. Later when snd_card_register() runs,
the OSS mixer layer calls their callbacks and hits a use-after-free read.
Call trace:
get_ctl_value+0x63f/0x820 sound/usb/mixer.c:411
get_min_max_with_quirks.isra.0+0x240/0x1f40 sound/usb/mixer.c:1241
mixer_ctl_feature_info+0x26b/0x490 sound/usb/mixer.c:1381
snd_mixer_oss_build_test+0x174/0x3a0 sound/core/oss/mixer_oss.c:887
...
snd_card_register+0x4ed/0x6d0 sound/core/init.c:923
usb_audio_probe+0x5ef/0x2a90 sound/usb/card.c:1025
Fix by calling snd_ctl_remove() for all mixer controls before freeing
id_elems. We save the next pointer first because snd_ctl_remove()
frees the current element. |
| In the Linux kernel, the following vulnerability has been resolved:
slimbus: core: fix device reference leak on report present
Slimbus devices can be allocated dynamically upon reception of
report-present messages.
Make sure to drop the reference taken when looking up already registered
devices.
Note that this requires taking an extra reference in case the device has
not yet been registered and has to be allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
intel_th: fix device leak on output open()
Make sure to drop the reference taken when looking up the th device
during output device open() on errors and on close().
Note that a recent commit fixed the leak in a couple of open() error
paths but not all of them, and the reference is still leaking on
successful open(). |
| In the Linux kernel, the following vulnerability has been resolved:
leds: led-class: Only Add LED to leds_list when it is fully ready
Before this change the LED was added to leds_list before led_init_core()
gets called adding it the list before led_classdev.set_brightness_work gets
initialized.
This leaves a window where led_trigger_register() of a LED's default
trigger will call led_trigger_set() which calls led_set_brightness()
which in turn will end up queueing the *uninitialized*
led_classdev.set_brightness_work.
This race gets hit by the lenovo-thinkpad-t14s EC driver which registers
2 LEDs with a default trigger provided by snd_ctl_led.ko in quick
succession. The first led_classdev_register() causes an async modprobe of
snd_ctl_led to run and that async modprobe manages to exactly hit
the window where the second LED is on the leds_list without led_init_core()
being called for it, resulting in:
------------[ cut here ]------------
WARNING: CPU: 11 PID: 5608 at kernel/workqueue.c:4234 __flush_work+0x344/0x390
Hardware name: LENOVO 21N2S01F0B/21N2S01F0B, BIOS N42ET93W (2.23 ) 09/01/2025
...
Call trace:
__flush_work+0x344/0x390 (P)
flush_work+0x2c/0x50
led_trigger_set+0x1c8/0x340
led_trigger_register+0x17c/0x1c0
led_trigger_register_simple+0x84/0xe8
snd_ctl_led_init+0x40/0xf88 [snd_ctl_led]
do_one_initcall+0x5c/0x318
do_init_module+0x9c/0x2b8
load_module+0x7e0/0x998
Close the race window by moving the adding of the LED to leds_list to
after the led_init_core() call. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/fpsimd: signal: Fix restoration of SVE context
When SME is supported, Restoring SVE signal context can go wrong in a
few ways, including placing the task into an invalid state where the
kernel may read from out-of-bounds memory (and may potentially take a
fatal fault) and/or may kill the task with a SIGKILL.
(1) Restoring a context with SVE_SIG_FLAG_SM set can place the task into
an invalid state where SVCR.SM is set (and sve_state is non-NULL)
but TIF_SME is clear, consequently resuting in out-of-bounds memory
reads and/or killing the task with SIGKILL.
This can only occur in unusual (but legitimate) cases where the SVE
signal context has either been modified by userspace or was saved in
the context of another task (e.g. as with CRIU), as otherwise the
presence of an SVE signal context with SVE_SIG_FLAG_SM implies that
TIF_SME is already set.
While in this state, task_fpsimd_load() will NOT configure SMCR_ELx
(leaving some arbitrary value configured in hardware) before
restoring SVCR and attempting to restore the streaming mode SVE
registers from memory via sve_load_state(). As the value of
SMCR_ELx.LEN may be larger than the task's streaming SVE vector
length, this may read memory outside of the task's allocated
sve_state, reading unrelated data and/or triggering a fault.
While this can result in secrets being loaded into streaming SVE
registers, these values are never exposed. As TIF_SME is clear,
fpsimd_bind_task_to_cpu() will configure CPACR_ELx.SMEN to trap EL0
accesses to streaming mode SVE registers, so these cannot be
accessed directly at EL0. As fpsimd_save_user_state() verifies the
live vector length before saving (S)SVE state to memory, no secret
values can be saved back to memory (and hence cannot be observed via
ptrace, signals, etc).
When the live vector length doesn't match the expected vector length
for the task, fpsimd_save_user_state() will send a fatal SIGKILL
signal to the task. Hence the task may be killed after executing
userspace for some period of time.
(2) Restoring a context with SVE_SIG_FLAG_SM clear does not clear the
task's SVCR.SM. If SVCR.SM was set prior to restoring the context,
then the task will be left in streaming mode unexpectedly, and some
register state will be combined inconsistently, though the task will
be left in legitimate state from the kernel's PoV.
This can only occur in unusual (but legitimate) cases where ptrace
has been used to set SVCR.SM after entry to the sigreturn syscall,
as syscall entry clears SVCR.SM.
In these cases, the the provided SVE register data will be loaded
into the task's sve_state using the non-streaming SVE vector length
and the FPSIMD registers will be merged into this using the
streaming SVE vector length.
Fix (1) by setting TIF_SME when setting SVCR.SM. This also requires
ensuring that the task's sme_state has been allocated, but as this could
contain live ZA state, it should not be zeroed. Fix (2) by clearing
SVCR.SM when restoring a SVE signal context with SVE_SIG_FLAG_SM clear.
For consistency, I've pulled the manipulation of SVCR, TIF_SVE, TIF_SME,
and fp_type earlier, immediately after the allocation of
sve_state/sme_state, before the restore of the actual register state.
This makes it easier to ensure that these are always modified
consistently, even if a fault is taken while reading the register data
from the signal context. I do not expect any software to depend on the
exact state restored when a fault is taken while reading the context. |
| In the Linux kernel, the following vulnerability has been resolved:
can: usb_8dev: usb_8dev_read_bulk_callback(): fix URB memory leak
Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In usb_8dev_open() -> usb_8dev_start(), the URBs for USB-in transfers are
allocated, added to the priv->rx_submitted anchor and submitted. In the
complete callback usb_8dev_read_bulk_callback(), the URBs are processed and
resubmitted. In usb_8dev_close() -> unlink_all_urbs() the URBs are freed by
calling usb_kill_anchored_urbs(&priv->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in usb_kill_anchored_urbs().
Fix the memory leak by anchoring the URB in the
usb_8dev_read_bulk_callback() to the priv->rx_submitted anchor. |
| A vulnerability was found in WeKan up to 8.20. Affected by this issue is some unknown functionality of the file server/methods/positionHistory.js of the component Position-History Tracking. The manipulation results in missing authorization. The attack may be performed from remote. Upgrading to version 8.21 can resolve this issue. The patch is identified as 55576ec17722db094835470b386162c9a662fb60. It is advisable to upgrade the affected component. |
| A vulnerability was identified in iomad up to 5.0. Affected is an unknown function of the component Company Admin Block. Such manipulation leads to sql injection. The attack can be executed remotely. It is best practice to apply a patch to resolve this issue. |
| A security flaw has been discovered in Free5GC up to 4.1.0. This impacts the function identityTriggerType of the file pfcp_reports.go. The manipulation results in null pointer dereference. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. Applying a patch is advised to resolve this issue. |
| A vulnerability was detected in libuvc up to 0.0.7. Affected is the function uvc_scan_streaming of the file src/device.c of the component UVC Descriptor Handler. The manipulation results in null pointer dereference. The attack needs to be approached locally. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was detected in abhiphile fermat-mcp up to 47f11def1cd37e45dd060f30cdce346cbdbd6f0a. This vulnerability affects the function eqn_chart of the file fmcp/mpl_mcp/core/eqn_chart.py. Performing a manipulation of the argument equations results in code injection. It is possible to initiate the attack remotely. The exploit is now public and may be used. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet. |
| Access control settings for forum post custom fields are not applied to the JSON output type, leading to an ACL violation vector an information disclosure |
| Address read vulnerability in the communication module.
Impact: Successful exploitation of this vulnerability may affect availability. |
| A vulnerability was identified in itsourcecode Student Management System 1.0. This affects an unknown function of the file /ramonsys/soa/index.php. Such manipulation of the argument ID leads to sql injection. The attack may be launched remotely. The exploit is publicly available and might be used. |
| Gogs is an open source self-hosted Git service. In version 0.13.3 and prior, an authenticated user can cause a DOS attack. If one of the repo files is deleted before synchronization, it will cause the application to crash. This issue has been patched in versions 0.13.4 and 0.14.0+dev. |
| Claude Code is an agentic coding tool. Prior to version 2.0.57, Claude Code failed to properly validate directory changes when combined with write operations to protected folders. By using the cd command to navigate into sensitive directories like .claude, it was possible to bypass write protection and create or modify files without user confirmation. Reliably exploiting this required the ability to add untrusted content into a Claude Code context window. This issue has been patched in version 2.0.57. |
| A vulnerability was identified in Portabilis i-Educar up to 2.10. Affected by this vulnerability is an unknown functionality of the file /intranet/meusdadod.php of the component User Data Page. Such manipulation of the argument File leads to cross site scripting. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
