| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: core: regulator_lock_two() should test for EDEADLK not EDEADLOCK
Compare against -EDEADLK, which is what ww_mutex_lock() actually
returns and what every other deadlock check in this file already uses.
Function regulator_lock_two() acquires two regulators via
regulator_lock_nested() -> ww_mutex_lock(). On contention,
ww_mutex_lock() returns -EDEADLK, which is the caller's signal to drop
the lock it holds and retry the acquisition in the canonical order.
However, regulator_lock_two() tests the return value against -EDEADLOCK
rather than -EDEADLK. On most architectures, EDEADLK and EDEADLOCK are
the same value, so the comparison happens to be correct and the bug is
invisible. But on MIPS, SPARC, and PowerPC, those two errors have
different values. The test is wrong: a genuine -EDEADLK backoff no
longer matches -EDEADLOCK, so instead of unlocking and retrying, the
code falls into WARN_ON(ret) and returns with only one of the two
regulators locked.
In practice, this is a bug only on MIPS, because the regulator core is
not built or used on the other two platforms.
In general, EDEADLK is preferred over EDEADLOCK for new code. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_lookup: fix catchall element handling with inverted lookups
nft_lookup_eval() decides whether a lookup matched (`found`) from the
direct set lookup and priv->invert before falling back to the
catchall element used by interval sets (e.g. nft_set_rbtree) for the
open-ended default range. Since `found` is never recomputed after
`ext` is replaced by the catchall lookup, inverted lookups
(NFT_LOOKUP_F_INV, "!= @set") can wrongly match or wrongly skip the
catchall element, producing the wrong verdict. Fold the catchall
lookup into `ext` before computing `found`, matching the order
already used by nft_objref_map_eval(). |
| In the Linux kernel, the following vulnerability has been resolved:
keys: make keyring key-chunk byte order agree with keyring_diff_objects()
keyring_get_key_chunk() loads description bytes into the index chunk low
address first, while keyring_diff_objects() numbers the first differing
bit from the low end and folds the absolute byte index into the level
without removing the inline-prefix offset the level already carries.
The two disagree on byte order and bit position, so the array can be
told two keys first differ at a bit that does not differ in the chunk
the walker uses, letting crafted descriptions collide into one node.
Load the chunk in the order keyring_diff_objects() assumes and drop the
inline-prefix length when folding the byte index into the level. This
only changes the in-memory ordering used to place keys within a keyring;
add, search and read of non-colliding keys are unaffected. |
| ArcadeDB before 26.8.1 contains an arbitrary file read vulnerability in the GraalVM JavaScript sandbox allowlist enforcement, which uses unescaped regular expressions to validate package names. Attackers with trigger creation privileges can use Java.type() to access java.util.zip.ZipFile or java.util.jar.JarFile classes and read arbitrary files on the host system as the ArcadeDB server process. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/uaccess: correct check for CONFIG_PPC_E500 in mask_user_address()
mask_user_address() incorrectly checks for CONFIG_E500 instead of
CONFIG_PPC_E500, causing mask_user_address_isel() to not be used on
E500 hardware. Fix the check to use the correct name. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use memcmp() to compare ClientGUIDs
ClientGUID is a fixed-size binary value and can contain embedded NUL
bytes. strncmp() stops comparing at the first NUL byte, so different
ClientGUID values can incorrectly be treated as equal.
Use memcmp() in SMB3 multichannel session binding and
FSCTL_VALIDATE_NEGOTIATE_INFO to compare all SMB2_CLIENT_GUID_SIZE
bytes. |
| Multiple Cisco products are affected by a vulnerability in the rate filtering feature of the Snort detection engine that could allow an unauthenticated, remote attacker to bypass a configured rate limiting filter.
This vulnerability is due to an incorrect connection count comparison. An attacker could exploit this vulnerability by sending traffic through an affected device at a rate that exceeds a configured rate filter. A successful exploit could allow the attacker to successfully bypass the rate filter. This could allow unintended traffic to enter the network protected by the affected device. |
| A flaw was found in Keycloak Policy Enforcer. This vulnerability allows any authenticated user to bypass all authorization policies, including role, scope, and User-Managed Access (UMA) permission checks. By including the configured access-denied page path within a request URL, either as a path segment or a query parameter, an attacker can gain unauthorized access to protected resources. |
| Reliance on IP Address for Authentication vulnerability in Erlang/OTP ssl (inet_tls_dist module) allows unauthenticated bypass of the distribution-over-TLS LAN allowlist.
The inet_tls_dist:check_ip/1 function, which enforces a LAN allowlist for Erlang distribution over TLS, calls inet:sockname/1 instead of inet:peername/1 to obtain the peer's IP address. Because inet:sockname/1 returns the local socket address, both the local IP and the supposed peer IP resolve to the same value, causing the subnet mask comparison to always succeed regardless of the actual remote address. Any holder of a CA-signed TLS certificate can therefore bypass the LAN restriction and gain full Erlang distribution access to the node, including rpc:call/4 and code:load_binary/3.
This vulnerability is associated with program file lib/ssl/src/inet_tls_dist.erl.
This issue affects OTP from OTP 26.0 before OTP 29.0.2, OTP 28.5.0.2 and OTP 27.3.4.13, corresponding to ssl from 11.0 before 11.7.2, 11.6.0.2 and 11.2.12.9. |
| stoatchat (delta) versions before 20250210-1 (0.8.2) contain a logic error in the query messages route. When fetching messages 'nearby' another message, the database query can be given a message limit of zero, which the database interprets as 'no limit'. A remote unauthenticated attacker can craft nearby message fetch requests to download an entire channel's message history in a single expensive request, and can send many such requests in parallel, resulting in denial of service through resource exhaustion. |
| setuptools is a package that allows users to download, build, install, upgrade, and uninstall Python packages. Prior to 83.0.0, FileList applied MANIFEST.in exclude, global-exclude, recursive-exclude, and prune directives by matching compiled glob patterns against on-disk file names without Unicode normalization, so on macOS APFS or HFS+ an NFD file name could bypass an NFC exclusion rule and be packed into a source distribution. This issue is fixed in version 83.0.0. |
| libcurl would reuse a previously created connection even when some mTLS config
related option had been changed that should have prohibited reuse.
libcurl keeps previously used connections in a connection pool for subsequent
transfers to reuse if one of them matches the setup. However, some TLS
settings related to client certificates were left out from the configuration
match checks, making them match too easily. In particular options related to
the private key. |
| libcurl might in some circumstances reuse the wrong connection for SMB(S)
transfers.
libcurl features a pool of recent connections so that subsequent requests can
reuse an existing connection to avoid overhead.
When reusing a connection a range of criteria must be met. Due to a logical
error in the code, a network transfer operation that was requested by an
application could wrongfully reuse an existing SMB connection to the same
server that was using a different 'share' than the new subsequent transfer
should.
This could in unlucky situations lead to the download of the wrong file or the
upload of a file to the wrong place. When this happens, the same credentials
are used and the server name is the same. |
| Axios is a promise based HTTP client for the browser and Node.js. Prior to 1.15.1 and 0.31.1, the Axios library's XSRF token protection logic uses JavaScript truthy/falsy semantics instead of strict boolean comparison for the withXSRFToken config property. When this property is set to any truthy non-boolean value (via prototype pollution or misconfiguration), the same-origin check (isURLSameOrigin) is short-circuited, causing XSRF tokens to be sent to all request targets including cross-origin servers controlled by an attacker. This vulnerability is fixed in 1.15.1 and 0.31.1. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix use of wrong skb when comparing queued RESP challenge serial
In rxrpc_post_response(), the code should be comparing the challenge serial
number from the cached response before deciding to switch to a newer
response, but looks at the newer packet private data instead, rendering the
comparison always false.
Fix this by switching to look at the older packet.
Fix further[1] to substitute the new packet in place of the old one if
newer and also to release whichever we don't use. |
| ZEBRA is a Zcash node written entirely in Rust. Prior to zebrad version 4.3.1 and zebra-consensus version 5.0.2, a logic error in Zebra's transaction verification cache could allow a malicious miner to induce a consensus split. By carefully submitting a transaction that is valid for height H+1 but invalid for H+2 and then mining that transaction in a block at height H+2, a miner could cause vulnerable Zebra nodes to accept an invalid block, leading to a consensus split from the rest of the Zcash network. This vulnerability is fixed in zebrad version 4.3.1 and zebra-consensus version 5.0.2. |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of International Color Consortium (ICC) color management profiles. Versions prior to 2.3.1.2 have a Type Confusion vulnerability in `CIccTag:IsTypeCompressed()`. This vulnerability affects users of the iccDEV library who process ICC color profiles. Version 2.3.1.2 contains a patch. No known workarounds are available. |
| In systemd 260 before 261, a local unprivileged user can trigger an assert via an IPC API call with an array or map that has a null element. |
| operations/attestation/AttestationTask.kt in the Tangem SDK before 5.18.3 for Android has a logic flow in offline wallet attestation (genuineness check) that causes verification results to be disregarded during the first scan of a card. Exploitation may not have been possible. |
| HAProxy 2.2 through 3.1.6, in certain uncommon configurations, has a sample_conv_regsub heap-based buffer overflow because of mishandling of the replacement of multiple short patterns with a longer one. |
