| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix off-by-one in TXF key sanitiser
iwl_mvm_frob_txf_key_iter() tracks the last matched byte position
in loop variable 'i'. When a full key match is found (match ==
keylen), 'i' points at the last byte of the matched key. The
memset start offset should therefore be i + 1 - keylen, not
i - keylen; the current code zeroes one byte before the match
and leaves the final key byte un-sanitised. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix recursive locking during device registration
i3c_master_register_new_i3c_devs() registers newly discovered devices
while holding i3c_bus_normaluse_lock(), a down_read(). device_register()
can immediately probe the device, and probe callbacks typically invoke
I3C helpers that take i3c_bus_normaluse_lock() again, leading to a
recursive acquisition of the same rwsem. rwsems do not support recursive
read locking and can deadlock when a writer is waiting. See the
"Recursive read locks" section of Documentation/locking/lockdep-design.rst.
For example, with Intel LPSS I3C, LOCKDEP generates a WARNING like:
# echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/unbind
# echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/bind
WARNING: possible recursive locking detected
kworker/5:1/94 is trying to acquire lock:
ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_device_match_id+0x45/0x370
but task is already holding lock:
ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_master_reg_work_fn+0x21/0x5f0
Fix this by separating device creation from device registration.
Populate desc->dev under the maintenance lock, collect the devices that
still need registration into a local list, then release the lock before
calling device_register(). Finally retake the lock and clean up any
devices that failed to register.
Use the maintenance lock rather than the normal-use lock while adding
device objects. A write-side maintenance lock prevents readers from
observing a partially initialized desc->dev during initial device
population, or desc->dev disappearing if registration fails.
The local list requires a list node, so add a list node member to struct
i3c_device. |
| On affected platforms running Arista EOS with Open Shortest Path First version 3 (OSPFv3) configured, a specially crafted packet can cause the OSPFv3 agent to restart unexpectedly. |
| node-opcua is an OPC UA implementation for TypeScript and Node.js. Prior to node-opcua-client 2.145.0, the internal fieldsToJson method in packages/node-opcua-client/source/alarms_and_conditions/client_alarm.ts directly assigns unsanitized field names and allows a __proto__.pollutedKey path to modify Object.prototype. Successful exploitation requires an application to expose attacker-controlled event fields to fieldsToJson and may cause denial of service or application logic corruption. This vulnerability is fixed in 2.145.0. |
| Vendure is an open-source headless commerce platform. Prior to 3.6.5, the public Shop GraphQL API allows an unauthenticated caller to supply a catastrophically backtracking pattern through StringOperators.regex. packages/core/src/service/helpers/list-query-builder/parse-filter-params.ts passes the raw pattern to the REGEXP implementation registered by packages/core/src/service/helpers/list-query-builder/list-query-builder.ts, and better-sqlite3 and sqljs evaluate it synchronously in the Node.js event loop. ShopProductsResolver.products is publicly reachable, so one nested-quantifier pattern can block request processing and make the storefront and admin API unavailable, while repeated requests can sustain denial of service. PostgreSQL and MySQL or MariaDB deployments do not execute this regular expression in the Node.js event loop. This issue is fixed in version 3.6.5. |
| deepmerge through 4.3.1 contains a prototype poisoning vulnerability in the mergeObject() function that fails to properly validate keys being written to target objects. Attackers can supply malicious source objects in merge operations to inject attacker-controlled properties into the returned object's prototype, causing applications to inherit unintended values when accessing properties without own-property checks. |
| joi (npm package `joi`, hapi.js) versions >=17.2.0 <17.13.7 and >=18.0.0 <18.2.6 are vulnerable to regular expression denial of service in the `Joi.string().isoDate()` validation rule. One of the regular expressions the rule applies to the input is unanchored, so a valid ISO date followed by a long run of fractional-second digits causes the regex engine to restart its search from every position in the string, yielding time proportional to the square of the input length (about 1.4 s for 64 KB of digits and about 22 s for 256 KB). A remote attacker who can supply a string to an isoDate validation can stall the application with a single request. Fixed in 17.13.7 and 18.2.6; as a workaround, cap the length of the string before it reaches joi. |
| Builder.io Gen2 SDKs through versions 5.2.11 and 0.25.13 contain a prototype pollution vulnerability in the deep-set helper function that processes content block bindings without validation. Attackers can craft content blocks with binding keys containing __proto__, prototype, or constructor paths to pollute Object.prototype during rendering, affecting all subsequent objects created in the process including other tenants' renders. |
| Builder.io Gen2 SDKs through versions 5.2.11 and 0.25.13 contain a prototype pollution vulnerability in the unflatten helper that processes builder.userAttributes query parameters without prototype guards. Attackers can craft preview links with __proto__ or prototype segments to pollute Object.prototype in a visitor's browser when the SDK processes the malicious URL. |
| rhwp is an HWP viewer and editor implemented in Rust and WebAssembly. Prior to rhwp 0.7.15 and rhwp Chrome and Firefox extension 0.2.4, the browser extensions use an all-URLs host permission to detect HWP and HWPX links on visited pages, but the service workers do not validate message senders, URL schemes, or destination addresses before privileged fetches. The affected paths are rhwp-chrome/manifest.json, rhwp-chrome/content-script.js, rhwp-chrome/sw/message-router.js, rhwp-chrome/sw/thumbnail-extractor.js, rhwp-firefox/manifest.json, rhwp-firefox/content-script.js, rhwp-firefox/sw/message-router.js, and rhwp-firefox/sw/thumbnail-extractor.js. An untrusted page can make the fetch-file and extract-thumbnail handlers request localhost or private-network resources. When a target HWP or HWPX file contains an extractable PrvImage, the extension returns the preview as a data URI in page-readable DOM, allowing page script to read it. The flaw also permits internal-resource existence and port probing and extension presence or version fingerprinting. Exploitation requires a user to visit an untrusted page while the extension is enabled, and preview disclosure is limited to an extractable PrvImage. This issue is fixed in rhwp 0.7.15 and rhwp Chrome and Firefox extension 0.2.4. |
| n8n before 1.123.67, 2.31.5, and 2.32.1 contains a prototype pollution vulnerability in the VM expression engine. An authenticated user able to create or edit a workflow expression can abuse the engine's array-element access to obtain a reference to a host built-in and pollute its prototype in the main n8n process (a sandbox escape), leading to a denial of service. Both self-hosted and cloud instances running the VM expression engine are affected. |
| An inefficient regular expression complexity issue in the in-memory query evaluation component of the Mongoid library may allow an unauthenticated party to cause excessive processing within an embedding application process. Applications that place user-supplied text into a pattern-matching query condition on an embedded association may become unresponsive. |
| GitPython before 3.1.60 contains a regular expression denial of service vulnerability in Actor.name_email_regex that processes commit author and committer fields. Attackers can craft a commit object with a malformed author field containing an unterminated angle bracket to cause quadratic backtracking, exhausting CPU resources for over two minutes per commit access. |
| libheif is a HEIF and AVIF file format decoder and encoder. Prior to 1.23.2, the public heif_region_item_add_region_inline_mask_data() function in libheif/api/libheif/heif_regions.cc accepts mask_data_len without verifying that it equals the byte count required by width and height. A later heif_region_get_mask_image() call derives the read length from the region geometry, so an undersized stored buffer causes heif_region_get_inline_mask_image() to read beyond the heap allocation and copy adjacent bytes into the returned monochrome mask image. This can disclose heap data or crash an application that constructs region metadata through the writer API, while the file-parsing path is not affected because it validates the canonical mask size. This issue is fixed in version 1.23.2. |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.1.16.0, A crafted 1-bit contiguous cmyk tiff is exposed through a native uint1 imagespec, so callers allocate a bit-packed buffer. tiffinput::read_native_scanline_locked() nevertheless invokes tiffinput::bit_convert() with 8-bit output and writes one expanded byte per value into that smaller buffer, resulting in a heap out-of-bounds write and memory corruption. The affected implementation is identified by src/tiff.imageio/tiffinput.cpp, TIFFInput::bit_convert(), TIFFInput::read_native_scanline_locked(), PHOTOMETRIC_SEPARATED, 1-bit CMYK, and native uint1 ImageSpec, which define the relevant source path, functions, state, and trigger. This issue is fixed in 3.1.16.0. |
| Incorrect Calculation of Buffer Size in GitHub repository vim/vim prior to 9.0.1378. |
| gopls by default communicates via pipe. However, -port and -listen flags are supported as means of debugging.
If -listen is given a value without an explicit host (e.g. :8080), or -port is used, gopls will listen on 0.0.0.0.
As a result, users might inadvertently cause gopls to bind 0.0.0.0.
This can allow a malicious party on the same network to execute code arbitrarily via gopls. |
| Open WebUI is an extensible, feature-rich, and user-friendly self-hosted AI platform. From 0.9.0 until 0.11.0, automation recurrence parsing in backend/open_webui/utils/automations.py anchored minutely and hourly rules at a fixed date of 2000-01-01 and then walked forward one interval at a time to find the next run. A single FREQ=MINUTELY rule enumerates roughly a quarter-century of occurrences synchronously on the event loop that also serves scheduler, HTTP, and WebSocket traffic, and the scheduler recomputes the next run for every claimed row on each poll. This causes availability impact for every other user of the instance. This issue is fixed in 0.11.0. |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. From 1.0.0 until 4.14.6 and 5.0.0-beta2, HandleSecureMessage() in src/remoted/secure.c passes a pointer inside its stack buffer to ReadSecMSG(), and src/os_crypto/shared/msgs.c decompresses up to OS_MAXSTR bytes at that offset. For an encrypted agent message on TCP port 1514 that expands to 65,536 bytes, os_zlib_uncompress() writes a terminating null byte beyond the end of the destination buffer. The resulting stack out-of-bounds write in the root-level remoted daemon can crash message processing and disrupt agent communications. This issue is fixed in versions 4.14.6 and 5.0.0-beta2. |
| Open WebUI is an extensible, feature-rich, and user-friendly self-hosted AI platform. From 0.9.6 until 0.11.0, the built-in knowledge search path in backend/open_webui/tools/knowledge_fs.py and backend/open_webui/tools/builtin.py let a chat participant choose a pattern used to grep knowledge files. Patterns containing regex metacharacters were compiled with Python's backtracking re engine and run against every line of every reachable file with no time limit, so a crafted pattern such as (x|x)*y and one matching uploaded file line can pin one CPU core and block the event loop. This causes availability impact for every other user of the affected worker. This issue is fixed in 0.11.0. |
