| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When generating an ICMP Destination Unreachable or Packet Too Big response, the handler copies a portion of the original packet into the ICMP error body using the IP header's self-declared total length (ip_tot_len for IPv4, ip6_plen for IPv6) without validating it against the actual packet buffer size. A VM can send a short packet with an inflated IP length field that triggers an ICMP error (e.g., by hitting a reject ACL), causing ovn-controller to read heap memory beyond the valid packet data and include it in the ICMP response sent back to the VM. |
| A flaw was found in OVN (Open Virtual Network). A remote attacker, by sending crafted DHCPv6 (Dynamic Host Configuration Protocol for IPv6) SOLICIT packets with an inflated Client ID length, could cause the ovn-controller to read beyond the bounds of a packet. This out-of-bounds read can lead to the disclosure of sensitive information stored in heap memory, which is then returned to the attacker's virtual machine port. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate EaNameLength in smb2_get_ea()
smb2_get_ea() reads ea_req->EaNameLength from the client request and
passes it directly to strncmp() as the comparison length without
verifying that the length of the name really is the size of the input
buffer received.
Fix this up by properly checking the size of the name based on the value
received and the overall size of the request, to prevent a later
strncmp() call to use the length as a "trusted" size of the buffer.
Without this check, uninitialized heap values might be slowly leaked to
the client. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: convert inline data to extents when truncate exceeds inline size
Add a check in ext4_setattr() to convert files from inline data storage
to extent-based storage when truncate() grows the file size beyond the
inline capacity. This prevents the filesystem from entering an
inconsistent state where the inline data flag is set but the file size
exceeds what can be stored inline.
Without this fix, the following sequence causes a kernel BUG_ON():
1. Mount filesystem with inode that has inline flag set and small size
2. truncate(file, 50MB) - grows size but inline flag remains set
3. sendfile() attempts to write data
4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity)
The crash occurs because ext4_write_inline_data() expects inline storage
to accommodate the write, but the actual inline capacity (~60 bytes for
i_block + ~96 bytes for xattrs) is far smaller than the file size and
write request.
The fix checks if the new size from setattr exceeds the inode's actual
inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to
extent-based storage before proceeding with the size change.
This addresses the root cause by ensuring the inline data flag and file
size remain consistent during truncate operations. |
| An improper handling of the length parameter inconsistency vulnerability has been identified in Moxa’s Secure Router. Because of improper validation of length parameters in the HTTPS management interface, an unauthenticated remote attacker could send specially crafted requests that trigger a buffer overflow condition, causing the web service to become unresponsive. Successful exploitation may result in a denial-of-service condition requiring a device reboot to restore normal operation. While successful exploitation can severely impact the availability of the affected device, no impact to the confidentiality or integrity of the affected product has been identified. Additionally, no confidentiality, integrity, or availability impact to the subsequent system has been identified. |
| rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.9.24 to before 0.10.78, the FFI trampolines behind SslContextBuilder::set_psk_client_callback, set_psk_server_callback, set_cookie_generate_cb, and set_stateless_cookie_generate_cb forwarded the user closure's returned usize directly to OpenSSL without checking it against the &mut [u8] that was handed to the closure. This can lead to buffer overflows and other unintended consequences. This vulnerability is fixed in 0.10.78. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: fix oversized RESPONSE authenticator length check
rxgk_verify_response() decodes auth_len from the packet and is supposed
to verify that it fits in the remaining bytes. The existing check is
inverted, so oversized RESPONSE authenticators are accepted and passed
to rxgk_decrypt_skb(), which can later reach skb_to_sgvec() with an
impossible length and hit BUG_ON(len).
Decoded from the original latest-net reproduction logs with
scripts/decode_stacktrace.sh:
RIP: __skb_to_sgvec()
[net/core/skbuff.c:5285 (discriminator 1)]
Call Trace:
skb_to_sgvec() [net/core/skbuff.c:5305]
rxgk_decrypt_skb() [net/rxrpc/rxgk_common.h:81]
rxgk_verify_response() [net/rxrpc/rxgk.c:1268]
rxrpc_process_connection()
[net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364
net/rxrpc/conn_event.c:386]
process_one_work() [kernel/workqueue.c:3281]
worker_thread()
[kernel/workqueue.c:3353 kernel/workqueue.c:3440]
kthread() [kernel/kthread.c:436]
ret_from_fork() [arch/x86/kernel/process.c:164]
Reject authenticator lengths that exceed the remaining packet payload. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate L2CAP_INFO_RSP payload length before access
l2cap_information_rsp() checks that cmd_len covers the fixed
l2cap_info_rsp header (type + result, 4 bytes) but then reads
rsp->data without verifying that the payload is present:
- L2CAP_IT_FEAT_MASK calls get_unaligned_le32(rsp->data), which reads
4 bytes past the header (needs cmd_len >= 8).
- L2CAP_IT_FIXED_CHAN reads rsp->data[0], 1 byte past the header
(needs cmd_len >= 5).
A truncated L2CAP_INFO_RSP with result == L2CAP_IR_SUCCESS triggers an
out-of-bounds read of adjacent skb data.
Guard each data access with the required payload length check. If the
payload is too short, skip the read and let the state machine complete
with safe defaults (feat_mask and remote_fixed_chan remain zero from
kzalloc), so the info timer cleanup and l2cap_conn_start() still run
and the connection is not stalled. |
| In the Linux kernel, the following vulnerability has been resolved:
nfnetlink_osf: validate individual option lengths in fingerprints
nfnl_osf_add_callback() validates opt_num bounds and string
NUL-termination but does not check individual option length fields.
A zero-length option causes nf_osf_match_one() to enter the option
matching loop even when foptsize sums to zero, which matches packets
with no TCP options where ctx->optp is NULL:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
nf_osf_match (net/netfilter/nfnetlink_osf.c:227)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:293)
nf_hook_slow (net/netfilter/core.c:623)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
Additionally, an MSS option (kind=2) with length < 4 causes
out-of-bounds reads when nf_osf_match_one() unconditionally accesses
optp[2] and optp[3] for MSS value extraction. While RFC 9293
section 3.2 specifies that the MSS option is always exactly 4
bytes (Kind=2, Length=4), the check uses "< 4" rather than
"!= 4" because lengths greater than 4 do not cause memory
safety issues -- the buffer is guaranteed to be at least
foptsize bytes by the ctx->optsize == foptsize check.
Reject fingerprints where any option has zero length, or where an MSS
option has length less than 4, at add time rather than trusting these
values in the packet matching hot path. |
| Heap-based buffer overflow in the parse_tag_3_packet function in fs/ecryptfs/keystore.c in the eCryptfs subsystem in the Linux kernel before 2.6.30.4 allows local users to cause a denial of service (system crash) or possibly gain privileges via vectors involving a crafted eCryptfs file, related to a large encrypted key size in a Tag 3 packet. |
| Stack-based buffer overflow in the parse_tag_11_packet function in fs/ecryptfs/keystore.c in the eCryptfs subsystem in the Linux kernel before 2.6.30.4 allows local users to cause a denial of service (system crash) or possibly gain privileges via vectors involving a crafted eCryptfs file, related to not ensuring that the key signature length in a Tag 11 packet is compatible with the key signature buffer size. |
| Stack-based buffer overflow in the script_write_params method in client/dhclient.c in ISC DHCP dhclient 4.1 before 4.1.0p1, 4.0 before 4.0.1p1, 3.1 before 3.1.2p1, 3.0, and 2.0 allows remote DHCP servers to execute arbitrary code via a crafted subnet-mask option. |
| The asn1buf_imbed function in the ASN.1 decoder in MIT Kerberos 5 (aka krb5) 1.6.3, when PK-INIT is used, allows remote attackers to cause a denial of service (application crash) via a crafted length value that triggers an erroneous malloc call, related to incorrect calculations with pointer arithmetic. |
| An issue was discovered in HAProxy before 3.3.6. The HTTP/3 parser does not check that the received body length matches a previously announced content-length when the stream is closed via a frame with an empty payload. This can cause desynchronization issues with the backend server and could be used for request smuggling. The earliest affected version is 2.6. |
| The 'zipfile' module would not check the validity of the ZIP64 End of
Central Directory (EOCD) Locator record offset value would not be used to
locate the ZIP64 EOCD record, instead the ZIP64 EOCD record would be
assumed to be the previous record in the ZIP archive. This could be abused
to create ZIP archives that are handled differently by the 'zipfile' module
compared to other ZIP implementations.
Remediation maintains this behavior, but checks that the offset specified
in the ZIP64 EOCD Locator record matches the expected value. |
| libgphoto2 is a camera access and control library. In versions up to and including 2.5.33, two functions in camlibs/ptp2/ptp-pack.c accept a data pointer but no length parameter, performing unbounded reads. Their callers in ptp_unpack_EOS_events() have xsize available but never pass it, leaving both functions unable to validate reads against the actual buffer boundary. Commit 1817ecead20c2aafa7549dac9619fe38f47b2f53 patches the issue. |
| In rsync 3.0.1 through 3.4.1, receive_xattr relies on an untrusted length value during a qsort call, leading to a receiver use-after-free. The victim must run rsync with -X (aka --xattrs). On Linux, many (but not all) common configurations are vulnerable. Non-Linux platforms are more widely vulnerable. |
| The (1) TLS and (2) DTLS implementations in OpenSSL 1.0.1 before 1.0.1g do not properly handle Heartbeat Extension packets, which allows remote attackers to obtain sensitive information from process memory via crafted packets that trigger a buffer over-read, as demonstrated by reading private keys, related to d1_both.c and t1_lib.c, aka the Heartbleed bug. |
| Net::CIDR::Lite versions before 0.23 for Perl mishandles IPv4 mapped IPv6 addresses, which may allow IP ACL bypass.
_pack_ipv6() includes the sentinel byte from _pack_ipv4() when building the packed representation of IPv4 mapped addresses like ::ffff:192.168.1.1. This produces an 18 byte value instead of 17 bytes, misaligning the IPv4 part of the address.
The wrong length causes incorrect results in mask operations (bitwise AND truncates to the shorter operand) and in find() / bin_find() which use Perl string comparison (lt/gt). This can cause find() to incorrectly match or miss addresses.
Example:
my $cidr = Net::CIDR::Lite->new("::ffff:192.168.1.0/120");
$cidr->find("::ffff:192.168.2.0"); # incorrectly returns true
This is triggered by valid RFC 4291 IPv4 mapped addresses (::ffff:x.x.x.x).
See also CVE-2026-40198, a related issue in the same function affecting malformed IPv6 addresses. |
| WARNING:
Users of 6.x should upgrade to 6.2.4 or later as the fix was missed in previous 6.x releases.
See the following for more details:
https://activemq.apache.org/security-advisories.data/CVE-2026-40046-announcement.txt
https://www.cve.org/CVERecord?id=CVE-2026-40046
Original Report:
Apache ActiveMQ does not properly validate the remaining length field which may lead to an overflow during the decoding of malformed packets. When this integer overflow occurs, ActiveMQ may incorrectly compute the total Remaining Length and subsequently misinterpret the payload as multiple MQTT control packets which makes the broker susceptible to unexpected behavior when interacting with non-compliant clients. This behavior violates the MQTT v3.1.1 specification, which restricts Remaining Length to a maximum of 4 bytes. The scenario occurs on established connections after the authentication process. Brokers that are not enabling mqtt transport connectors are not impacted.
This issue affects Apache ActiveMQ: before 5.19.2, 6.0.0 to 6.1.8, and 6.2.0
Users are recommended to upgrade to version 5.19.2, 6.1.9, or 6.2.1, which fixes the issue. |
