| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add null pointer check for get_first_active_display()
The function mod_hdcp_hdcp1_enable_encryption() calls the function
get_first_active_display(), but does not check its return value.
The return value is a null pointer if the display list is empty.
This will lead to a null pointer dereference in
mod_hdcp_hdcp2_enable_encryption().
Add a null pointer check for get_first_active_display() and return
MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/tegra: Fix a possible null pointer dereference
In tegra_crtc_reset(), new memory is allocated with kzalloc(), but
no check is performed. Before calling __drm_atomic_helper_crtc_reset,
state should be checked to prevent possible null pointer dereference. |
| The Cordova plugin cordova-plugin-x-socialsharing (SocialSharing-PhoneGap-Plugin) for Android 6.0.4, registers an exported broadcast receiver nl.xservices.plugins.ShareChooserPendingIntent with an android.intent.action.SEND intent filter. The onReceive implementation accesses Intent.EXTRA_CHOSEN_COMPONENT without checking for null. If a broadcast is sent with extras present but without EXTRA_CHOSEN_COMPONENT, the code dereferences a null value and throws a NullPointerException. Because the receiver is exported and performs no permission or caller validation, any local application on the device can send crafted ACTION_SEND broadcasts to this component and repeatedly crash the host application, resulting in a local, unauthenticated application-level denial of service for any app that includes the plugin. |
| A NULL pointer dereference vulnerability has been reported to affect several QNAP operating system versions. The remote attackers can then exploit the vulnerability to launch a denial-of-service (DoS) attack.
We have already fixed the vulnerability in the following versions:
QTS 5.2.7.3297 build 20251024 and later
QuTS hero h5.2.7.3297 build 20251024 and later
QuTS hero h5.3.1.3292 build 20251024 and later |
| In the Linux kernel, the following vulnerability has been resolved:
maple_tree: fix MA_STATE_PREALLOC flag in mas_preallocate()
Temporarily clear the preallocation flag when explicitly requesting
allocations. Pre-existing allocations are already counted against the
request through mas_node_count_gfp(), but the allocations will not happen
if the MA_STATE_PREALLOC flag is set. This flag is meant to avoid
re-allocating in bulk allocation mode, and to detect issues with
preallocation calculations.
The MA_STATE_PREALLOC flag should also always be set on zero allocations
so that detection of underflow allocations will print a WARN_ON() during
consumption.
User visible effect of this flaw is a WARN_ON() followed by a null pointer
dereference when subsequent requests for larger number of nodes is
ignored, such as the vma merge retry in mmap_region() caused by drivers
altering the vma flags (which happens in v6.6, at least) |
| Null pointer dereference in Windows DirectX allows an authorized attacker to deny service locally. |
| Null pointer dereference in Windows DirectX allows an authorized attacker to deny service locally. |
| Null pointer dereference in Windows Client-Side Caching (CSC) Service allows an authorized attacker to elevate privileges locally. |
| NULL pointer dereference in TagSection.keys() in python-apt on APT-based Linux systems allows a local attacker to cause a denial of service (process crash) via a crafted deb822 file with a malformed non-UTF-8 key. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Initialize obj_event->obj_sub_list before xa_insert
The obj_event may be loaded immediately after inserted, then if the
list_head is not initialized then we may get a poisonous pointer. This
fixes the crash below:
mlx5_core 0000:03:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0 enhanced)
mlx5_core.sf mlx5_core.sf.4: firmware version: 32.38.3056
mlx5_core 0000:03:00.0 en3f0pf0sf2002: renamed from eth0
mlx5_core.sf mlx5_core.sf.4: Rate limit: 127 rates are supported, range: 0Mbps to 195312Mbps
IPv6: ADDRCONF(NETDEV_CHANGE): en3f0pf0sf2002: link becomes ready
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060
Mem abort info:
ESR = 0x96000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000007760fb000
[0000000000000060] pgd=000000076f6d7003, p4d=000000076f6d7003, pud=0000000777841003, pmd=0000000000000000
Internal error: Oops: 96000006 [#1] SMP
Modules linked in: ipmb_host(OE) act_mirred(E) cls_flower(E) sch_ingress(E) mptcp_diag(E) udp_diag(E) raw_diag(E) unix_diag(E) tcp_diag(E) inet_diag(E) binfmt_misc(E) bonding(OE) rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) isofs(E) cdrom(E) mst_pciconf(OE) ib_umad(OE) mlx5_ib(OE) ipmb_dev_int(OE) mlx5_core(OE) kpatch_15237886(OEK) mlxdevm(OE) auxiliary(OE) ib_uverbs(OE) ib_core(OE) psample(E) mlxfw(OE) tls(E) sunrpc(E) vfat(E) fat(E) crct10dif_ce(E) ghash_ce(E) sha1_ce(E) sbsa_gwdt(E) virtio_console(E) ext4(E) mbcache(E) jbd2(E) xfs(E) libcrc32c(E) mmc_block(E) virtio_net(E) net_failover(E) failover(E) sha2_ce(E) sha256_arm64(E) nvme(OE) nvme_core(OE) gpio_mlxbf3(OE) mlx_compat(OE) mlxbf_pmc(OE) i2c_mlxbf(OE) sdhci_of_dwcmshc(OE) pinctrl_mlxbf3(OE) mlxbf_pka(OE) gpio_generic(E) i2c_core(E) mmc_core(E) mlxbf_gige(OE) vitesse(E) pwr_mlxbf(OE) mlxbf_tmfifo(OE) micrel(E) mlxbf_bootctl(OE) virtio_ring(E) virtio(E) ipmi_devintf(E) ipmi_msghandler(E)
[last unloaded: mst_pci]
CPU: 11 PID: 20913 Comm: rte-worker-11 Kdump: loaded Tainted: G OE K 5.10.134-13.1.an8.aarch64 #1
Hardware name: https://www.mellanox.com BlueField-3 SmartNIC Main Card/BlueField-3 SmartNIC Main Card, BIOS 4.2.2.12968 Oct 26 2023
pstate: a0400089 (NzCv daIf +PAN -UAO -TCO BTYPE=--)
pc : dispatch_event_fd+0x68/0x300 [mlx5_ib]
lr : devx_event_notifier+0xcc/0x228 [mlx5_ib]
sp : ffff80001005bcf0
x29: ffff80001005bcf0 x28: 0000000000000001
x27: ffff244e0740a1d8 x26: ffff244e0740a1d0
x25: ffffda56beff5ae0 x24: ffffda56bf911618
x23: ffff244e0596a480 x22: ffff244e0596a480
x21: ffff244d8312ad90 x20: ffff244e0596a480
x19: fffffffffffffff0 x18: 0000000000000000
x17: 0000000000000000 x16: ffffda56be66d620
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000040 x10: ffffda56bfcafb50
x9 : ffffda5655c25f2c x8 : 0000000000000010
x7 : 0000000000000000 x6 : ffff24545a2e24b8
x5 : 0000000000000003 x4 : ffff80001005bd28
x3 : 0000000000000000 x2 : 0000000000000000
x1 : ffff244e0596a480 x0 : ffff244d8312ad90
Call trace:
dispatch_event_fd+0x68/0x300 [mlx5_ib]
devx_event_notifier+0xcc/0x228 [mlx5_ib]
atomic_notifier_call_chain+0x58/0x80
mlx5_eq_async_int+0x148/0x2b0 [mlx5_core]
atomic_notifier_call_chain+0x58/0x80
irq_int_handler+0x20/0x30 [mlx5_core]
__handle_irq_event_percpu+0x60/0x220
handle_irq_event_percpu+0x3c/0x90
handle_irq_event+0x58/0x158
handle_fasteoi_irq+0xfc/0x188
generic_handle_irq+0x34/0x48
... |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: fix bulk_move corruption when adding a entry
When the resource is the first in the bulk_move range, adding it again
(thus moving it to the tail) will corrupt the list since the first
pointer is not moved. This eventually lead to null pointer deref in
ttm_lru_bulk_move_del() |
| In the Linux kernel, the following vulnerability has been resolved:
eth: mlx4: Fix IS_ERR() vs NULL check bug in mlx4_en_create_rx_ring
Replace NULL check with IS_ERR() check after calling page_pool_create()
since this function returns error pointers (ERR_PTR).
Using NULL check could lead to invalid pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: Fix NPD when refreshing an FDB entry with a nexthop object
VXLAN FDB entries can point to either a remote destination or an FDB
nexthop group. The latter is usually used in EVPN deployments where
learning is disabled.
However, when learning is enabled, an incoming packet might try to
refresh an FDB entry that points to an FDB nexthop group and therefore
does not have a remote. Such packets should be dropped, but they are
only dropped after dereferencing the non-existent remote, resulting in a
NPD [1] which can be reproduced using [2].
Fix by dropping such packets earlier. Remove the misleading comment from
first_remote_rcu().
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 13 UID: 0 PID: 361 Comm: mausezahn Not tainted 6.17.0-rc1-virtme-g9f6b606b6b37 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:vxlan_snoop+0x98/0x1e0
[...]
Call Trace:
<TASK>
vxlan_encap_bypass+0x209/0x240
encap_bypass_if_local+0xb1/0x100
vxlan_xmit_one+0x1375/0x17e0
vxlan_xmit+0x6b4/0x15f0
dev_hard_start_xmit+0x5d/0x1c0
__dev_queue_xmit+0x246/0xfd0
packet_sendmsg+0x113a/0x1850
__sock_sendmsg+0x38/0x70
__sys_sendto+0x126/0x180
__x64_sys_sendto+0x24/0x30
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
#!/bin/bash
ip address add 192.0.2.1/32 dev lo
ip address add 192.0.2.2/32 dev lo
ip nexthop add id 1 via 192.0.2.3 fdb
ip nexthop add id 10 group 1 fdb
ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 12345 localbypass
ip link add name vx1 up type vxlan id 10020 local 192.0.2.2 dstport 54321 learning
bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 192.0.2.2 port 54321 vni 10020
bridge fdb add 00:aa:bb:cc:dd:ee dev vx1 self static nhid 10
mausezahn vx0 -a 00:aa:bb:cc:dd:ee -b 00:11:22:33:44:55 -c 1 -q |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: Fix NPD in {arp,neigh}_reduce() when using nexthop objects
When the "proxy" option is enabled on a VXLAN device, the device will
suppress ARP requests and IPv6 Neighbor Solicitation messages if it is
able to reply on behalf of the remote host. That is, if a matching and
valid neighbor entry is configured on the VXLAN device whose MAC address
is not behind the "any" remote (0.0.0.0 / ::).
The code currently assumes that the FDB entry for the neighbor's MAC
address points to a valid remote destination, but this is incorrect if
the entry is associated with an FDB nexthop group. This can result in a
NPD [1][3] which can be reproduced using [2][4].
Fix by checking that the remote destination exists before dereferencing
it.
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:vxlan_xmit+0xb58/0x15f0
[...]
Call Trace:
<TASK>
dev_hard_start_xmit+0x5d/0x1c0
__dev_queue_xmit+0x246/0xfd0
packet_sendmsg+0x113a/0x1850
__sock_sendmsg+0x38/0x70
__sys_sendto+0x126/0x180
__x64_sys_sendto+0x24/0x30
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
#!/bin/bash
ip address add 192.0.2.1/32 dev lo
ip nexthop add id 1 via 192.0.2.2 fdb
ip nexthop add id 10 group 1 fdb
ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy
ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0
bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10
arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3
[3]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014
RIP: 0010:vxlan_xmit+0x803/0x1600
[...]
Call Trace:
<TASK>
dev_hard_start_xmit+0x5d/0x1c0
__dev_queue_xmit+0x246/0xfd0
ip6_finish_output2+0x210/0x6c0
ip6_finish_output+0x1af/0x2b0
ip6_mr_output+0x92/0x3e0
ip6_send_skb+0x30/0x90
rawv6_sendmsg+0xe6e/0x12e0
__sock_sendmsg+0x38/0x70
__sys_sendto+0x126/0x180
__x64_sys_sendto+0x24/0x30
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f383422ec77
[4]
#!/bin/bash
ip address add 2001:db8:1::1/128 dev lo
ip nexthop add id 1 via 2001:db8:1::1 fdb
ip nexthop add id 10 group 1 fdb
ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy
ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0
bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10
ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0 |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: always call ceph_shift_unused_folios_left()
The function ceph_process_folio_batch() sets folio_batch entries to
NULL, which is an illegal state. Before folio_batch_release() crashes
due to this API violation, the function ceph_shift_unused_folios_left()
is supposed to remove those NULLs from the array.
However, since commit ce80b76dd327 ("ceph: introduce
ceph_process_folio_batch() method"), this shifting doesn't happen
anymore because the "for" loop got moved to ceph_process_folio_batch(),
and now the `i` variable that remains in ceph_writepages_start()
doesn't get incremented anymore, making the shifting effectively
unreachable much of the time.
Later, commit 1551ec61dc55 ("ceph: introduce ceph_submit_write()
method") added more preconditions for doing the shift, replacing the
`i` check (with something that is still just as broken):
- if ceph_process_folio_batch() fails, shifting never happens
- if ceph_move_dirty_page_in_page_array() was never called (because
ceph_process_folio_batch() has returned early for some of various
reasons), shifting never happens
- if `processed_in_fbatch` is zero (because ceph_process_folio_batch()
has returned early for some of the reasons mentioned above or
because ceph_move_dirty_page_in_page_array() has failed), shifting
never happens
Since those two commits, any problem in ceph_process_folio_batch()
could crash the kernel, e.g. this way:
BUG: kernel NULL pointer dereference, address: 0000000000000034
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: Oops: 0002 [#1] SMP NOPTI
CPU: 172 UID: 0 PID: 2342707 Comm: kworker/u778:8 Not tainted 6.15.10-cm4all1-es #714 NONE
Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.10 12/08/2023
Workqueue: writeback wb_workfn (flush-ceph-1)
RIP: 0010:folios_put_refs+0x85/0x140
Code: 83 c5 01 39 e8 7e 76 48 63 c5 49 8b 5c c4 08 b8 01 00 00 00 4d 85 ed 74 05 41 8b 44 ad 00 48 8b 15 b0 >
RSP: 0018:ffffb880af8db778 EFLAGS: 00010207
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000003
RDX: ffffe377cc3b0000 RSI: 0000000000000000 RDI: ffffb880af8db8c0
RBP: 0000000000000000 R08: 000000000000007d R09: 000000000102b86f
R10: 0000000000000001 R11: 00000000000000ac R12: ffffb880af8db8c0
R13: 0000000000000000 R14: 0000000000000000 R15: ffff9bd262c97000
FS: 0000000000000000(0000) GS:ffff9c8efc303000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000034 CR3: 0000000160958004 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
ceph_writepages_start+0xeb9/0x1410
The crash can be reproduced easily by changing the
ceph_check_page_before_write() return value to `-E2BIG`.
(Interestingly, the crash happens only if `huge_zero_folio` has
already been allocated; without `huge_zero_folio`,
is_huge_zero_folio(NULL) returns true and folios_put_refs() skips NULL
entries instead of dereferencing them. That makes reproducing the bug
somewhat unreliable. See
https://lore.kernel.org/20250826231626.218675-1-max.kellermann@ionos.com
for a discussion of this detail.)
My suggestion is to move the ceph_shift_unused_folios_left() to right
after ceph_process_folio_batch() to ensure it always gets called to
fix up the illegal folio_batch state. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: soc-core: care NULL dirver name on snd_soc_lookup_component_nolocked()
soc-generic-dmaengine-pcm.c uses same dev for both CPU and Platform.
In such case, CPU component driver might not have driver->name, then
snd_soc_lookup_component_nolocked() will be NULL pointer access error.
Care NULL driver name.
Call trace:
strcmp from snd_soc_lookup_component_nolocked+0x64/0xa4
snd_soc_lookup_component_nolocked from snd_soc_unregister_component_by_driver+0x2c/0x44
snd_soc_unregister_component_by_driver from snd_dmaengine_pcm_unregister+0x28/0x64
snd_dmaengine_pcm_unregister from devres_release_all+0x98/0xfc
devres_release_all from device_unbind_cleanup+0xc/0x60
device_unbind_cleanup from really_probe+0x220/0x2c8
really_probe from __driver_probe_device+0x88/0x1a0
__driver_probe_device from driver_probe_device+0x30/0x110
driver_probe_device from __driver_attach+0x90/0x178
__driver_attach from bus_for_each_dev+0x7c/0xcc
bus_for_each_dev from bus_add_driver+0xcc/0x1ec
bus_add_driver from driver_register+0x80/0x11c
driver_register from do_one_initcall+0x58/0x23c
do_one_initcall from kernel_init_freeable+0x198/0x1f4
kernel_init_freeable from kernel_init+0x1c/0x12c
kernel_init from ret_from_fork+0x14/0x28 |
| In the Linux kernel, the following vulnerability has been resolved:
sched: Fix sched_numa_find_nth_cpu() if mask offline
sched_numa_find_nth_cpu() uses a bsearch to look for the 'closest'
CPU in sched_domains_numa_masks and given cpus mask. However they
might not intersect if all CPUs in the cpus mask are offline. bsearch
will return NULL in that case, bail out instead of dereferencing a
bogus pointer.
The previous behaviour lead to this bug when using maxcpus=4 on an
rk3399 (LLLLbb) (i.e. booting with all big CPUs offline):
[ 1.422922] Unable to handle kernel paging request at virtual address ffffff8000000000
[ 1.423635] Mem abort info:
[ 1.423889] ESR = 0x0000000096000006
[ 1.424227] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1.424715] SET = 0, FnV = 0
[ 1.424995] EA = 0, S1PTW = 0
[ 1.425279] FSC = 0x06: level 2 translation fault
[ 1.425735] Data abort info:
[ 1.425998] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
[ 1.426499] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 1.426952] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 1.427428] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000004a9f000
[ 1.428038] [ffffff8000000000] pgd=18000000f7fff403, p4d=18000000f7fff403, pud=18000000f7fff403, pmd=0000000000000000
[ 1.429014] Internal error: Oops: 0000000096000006 [#1] SMP
[ 1.429525] Modules linked in:
[ 1.429813] CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc4-dirty #343 PREEMPT
[ 1.430559] Hardware name: Pine64 RockPro64 v2.1 (DT)
[ 1.431012] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1.431634] pc : sched_numa_find_nth_cpu+0x2a0/0x488
[ 1.432094] lr : sched_numa_find_nth_cpu+0x284/0x488
[ 1.432543] sp : ffffffc084e1b960
[ 1.432843] x29: ffffffc084e1b960 x28: ffffff80078a8800 x27: ffffffc0846eb1d0
[ 1.433495] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 1.434144] x23: 0000000000000000 x22: fffffffffff7f093 x21: ffffffc081de6378
[ 1.434792] x20: 0000000000000000 x19: 0000000ffff7f093 x18: 00000000ffffffff
[ 1.435441] x17: 3030303866666666 x16: 66663d736b73616d x15: ffffffc104e1b5b7
[ 1.436091] x14: 0000000000000000 x13: ffffffc084712860 x12: 0000000000000372
[ 1.436739] x11: 0000000000000126 x10: ffffffc08476a860 x9 : ffffffc084712860
[ 1.437389] x8 : 00000000ffffefff x7 : ffffffc08476a860 x6 : 0000000000000000
[ 1.438036] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000
[ 1.438683] x2 : 0000000000000000 x1 : ffffffc0846eb000 x0 : ffffff8000407b68
[ 1.439332] Call trace:
[ 1.439559] sched_numa_find_nth_cpu+0x2a0/0x488 (P)
[ 1.440016] smp_call_function_any+0xc8/0xd0
[ 1.440416] armv8_pmu_init+0x58/0x27c
[ 1.440770] armv8_cortex_a72_pmu_init+0x20/0x2c
[ 1.441199] arm_pmu_device_probe+0x1e4/0x5e8
[ 1.441603] armv8_pmu_device_probe+0x1c/0x28
[ 1.442007] platform_probe+0x5c/0xac
[ 1.442347] really_probe+0xbc/0x298
[ 1.442683] __driver_probe_device+0x78/0x12c
[ 1.443087] driver_probe_device+0xdc/0x160
[ 1.443475] __driver_attach+0x94/0x19c
[ 1.443833] bus_for_each_dev+0x74/0xd4
[ 1.444190] driver_attach+0x24/0x30
[ 1.444525] bus_add_driver+0xe4/0x208
[ 1.444874] driver_register+0x60/0x128
[ 1.445233] __platform_driver_register+0x24/0x30
[ 1.445662] armv8_pmu_driver_init+0x28/0x4c
[ 1.446059] do_one_initcall+0x44/0x25c
[ 1.446416] kernel_init_freeable+0x1dc/0x3bc
[ 1.446820] kernel_init+0x20/0x1d8
[ 1.447151] ret_from_fork+0x10/0x20
[ 1.447493] Code: 90022e21 f000e5f5 910de2b5 2a1703e2 (f8767803)
[ 1.448040] ---[ end trace 0000000000000000 ]---
[ 1.448483] note: swapper/0[1] exited with preempt_count 1
[ 1.449047] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 1.449741] SMP: stopping secondary CPUs
[ 1.450105] Kernel Offset: disabled
[ 1.450419] CPU features: 0x000000,00080000,20002001,0400421b
[
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: xilinx: axienet: Add error handling for RX metadata pointer retrieval
Add proper error checking for dmaengine_desc_get_metadata_ptr() which
can return an error pointer and lead to potential crashes or undefined
behaviour if the pointer retrieval fails.
Properly handle the error by unmapping DMA buffer, freeing the skb and
returning early to prevent further processing with invalid data. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: remove oem i2c adapter on finish
Fixes a bug where unbinding of the GPU would leave the oem i2c adapter
registered resulting in a null pointer dereference when applications try
to access the invalid device.
(cherry picked from commit 89923fb7ead4fdd37b78dd49962d9bb5892403e6) |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: led: Fix potential null-ptr-deref in start_task()
start_task() calls create_singlethread_workqueue() and not checked the
ret value, which may return NULL. And a null-ptr-deref may happen:
start_task()
create_singlethread_workqueue() # failed, led_wq is NULL
queue_delayed_work()
queue_delayed_work_on()
__queue_delayed_work() # warning here, but continue
__queue_work() # access wq->flags, null-ptr-deref
Check the ret value and return -ENOMEM if it is NULL. |
