Search Results (6640 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2024-24909 1 Dell 1 Openmanage 2026-06-16 8.8 High
Dell OpenManage Integration with Microsoft Windows Admin Center contains a Remote Code Execution vulnerability in the gateway plugin. A remote authenticated user could potentially exploit this vulnerability to escalate privileges. The malicious user may gain the ability to run arbitrary code remotely. This is a high severity vulnerability so Dell recommends customers to upgrade at the earliest opportunity.
CVE-2026-8683 1 Mattermost 2 Mattermost, Mattermost Desktop 2026-06-16 6.5 Medium
Mattermost Desktop App versions <=6.1 5.5.13.0 fail to account for attempting to open extremely long URLs in the Mattermost Desktop App which allows a malicious server owner to crash the application via including a script to call window.open on a very large URL. Mattermost Advisory ID: MMSA-2026-00652
CVE-2026-42850 1 Kovidgoyal 1 Kitty 2026-06-16 8.8 High
Kitty is a cross-platform GPU based terminal. In versions prior to 0.47.0, it is possible to inject commands within the subshell through kitty error. A special escape code will make kitty return an error, this error is not escaped and will be correctly echoed back to the terminal with CRLF, as such it will be run by the shell in use. To exploit this bug, the victim must use a netcat or a similar program to connect to the attacker, or else listening for someone to connect. Once this condition is set, an attacker could pwn the computer of the victim using a special kitty's escape code that will run a command in the shell in use. Version 04.7.0 fixes the issue.
CVE-2026-46026 1 Linux 1 Linux Kernel 2026-06-16 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Limit the maximum number of lookups Current code does no bound checking on the number of lookups a client can perform. Though the code restricts the lookups to local clients, there is still a possibility of a malicious local client sending a flood of NEW_LOOKUP messages over the same socket. Fix this issue by limiting the maximum number of lookups to 64 globally. Since the nameserver allows only atmost one local observer, this global lookup count will ensure that the lookups stay within the limit. Note that, limit of 64 is chosen based on the current platform requirements. If requirement changes in the future, this limit can be increased.
CVE-2026-5463 2 Dan Mcinerney, Danmcinerney 2 Pymetasploit3, Pymetasploit3 2026-06-16 8.6 High
Command injection vulnerability in console.run_module_with_output() in pymetasploit3 through version 1.0.6 allows attackers to inject newline characters into module options such as RHOSTS. This breaks the intended command structure and causes the Metasploit console to execute additional unintended commands, potentially leading to arbitrary command execution and manipulation of Metasploit sessions.
CVE-2026-46003 1 Linux 1 Linux Kernel 2026-06-16 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Limit the total number of nodes Currently, the nameserver doesn't limit the number of nodes it handles. This can be an attack vector if a malicious client starts registering random nodes, leading to memory exhaustion. Hence, limit the maximum number of nodes to 64. Note that, limit of 64 is chosen based on the current platform requirements. If requirement changes in the future, this limit can be increased.
CVE-2026-46012 1 Linux 1 Linux Kernel 2026-06-16 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix memory leaks in rxkad_verify_response() Fix rxkad_verify_response() to free the ticket and the server key under all circumstances by initialising the ticket pointer to NULL and then making all paths through the function after the first allocation has been done go through a single common epilogue that just releases everything - where all the releases skip on a NULL pointer.
CVE-2026-48854 1 Elixir-grpc 1 Grpc 2026-06-16 N/A
Allocation of Resources Without Limits or Throttling vulnerability in elixir-grpc grpc allows unauthenticated attackers to exhaust the BEAM's memory and crash the server by streaming a large or slow-trickle unary request body. 'Elixir.GRPC.Server.Adapters.Cowboy.Handler':read_full_body/3 (lib/grpc/server/adapters/cowboy/handler.ex) accumulates every received chunk into a single growing binary with no size cap. Additionally, when the client omits the grpc-timeout header, the per-chunk read timeout resolves to :infinity, allowing a slow-trickle client to keep the connection alive indefinitely while memory grows. A single connection is sufficient to exhaust server memory and crash the node. This issue affects grpc from 0.3.1 before 1.0.0.
CVE-2026-48853 1 Elixir-grpc 1 Grpc 2026-06-16 N/A
Deserialization of Untrusted Data and Allocation of Resources Without Limits or Throttling vulnerabilities in elixir-grpc grpc allow unauthenticated attackers to crash the BEAM node via atom table exhaustion and, when a decoded term flows into a call site that invokes it, achieve remote code execution on the server. 'Elixir.GRPC.Codec.Erlpack':decode/2 (lib/grpc/codec/erlpack.ex) calls :erlang.binary_to_term/1 on the raw gRPC message body without the :safe option, no size bound, and no type guard. Any unauthenticated peer that sends a request with Content-Type: application/grpc+erlpack can send a crafted payload that mints arbitrary new atoms (which are never garbage-collected, exhausting the bounded atom table and crashing the VM) or that encodes a fun term which, if applied anywhere downstream, executes attacker-controlled code inside the server process. This issue affects grpc from 0.4.0 before 1.0.0.
CVE-2026-46038 1 Linux 1 Linux Kernel 2026-06-16 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Free the node during ctrl_cmd_bye() A node sends the BYE packet when it is about to go down. So the nameserver should advertise the removal of the node to all remote and local observers and free the node finally. But currently, the nameserver doesn't free the node memory even after processing the BYE packet. This causes the node memory to leak. Hence, remove the node from Xarray list and free the node memory during both success and failure case of ctrl_cmd_bye().
CVE-2026-46042 1 Linux 1 Linux Kernel 2026-06-16 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix memory leaks in weighted_interleave_auto_store() weighted_interleave_auto_store() fetches old_wi_state inside the if (!input) block only. This causes two memory leaks: 1. When a user writes "false" and the current mode is already manual, the function returns early without freeing the freshly allocated new_wi_state. 2. When a user writes "true", old_wi_state stays NULL because the fetch is skipped entirely. The old state is then overwritten by rcu_assign_pointer() but never freed, since the cleanup path is gated on old_wi_state being non-NULL. A user can trigger this repeatedly by writing "1" in a loop. Fix both leaks by moving the old_wi_state fetch before the input check, making it unconditional. This also allows a unified early return for both "true" and "false" when the requested mode matches the current mode. Reviewed by: Donet Tom <donettom@linux.ibm.com>
CVE-2026-46044 1 Linux 1 Linux Kernel 2026-06-16 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ipmi:ssif: Clean up kthread on errors If an error occurs after the ssif kthread is created, but before the main IPMI code starts the ssif interface, the ssif kthread will not be stopped. So make sure the kthread is stopped on an error condition if it is running.
CVE-2026-26791 1 Gl-inet 3 Ar300m16, Ar300m16 Firmware, Gl-ar300m16 2026-06-16 9.8 Critical
GL-iNet GL-AR300M16 v4.3.11 was discovered to contain a command injection vulnerability via the string port parameter in the enable_echo_server function. This vulnerability allows attackers to execute arbitrary commands via a crafted input.
CVE-2026-26792 1 Gl-inet 3 Ar300m16, Ar300m16 Firmware, Gl-ar300m16 2026-06-16 9.8 Critical
GL-iNet GL-AR300M16 v4.3.11 was discovered to contain multiple command injection vulnerabilities in the set_upgrade function via the modem_url, target_version, current_version, firmware_upload, hash_type, hash_value, and upgrade_type parameters. These vulnerabilities allow attackers to execute arbitrary commands via a crafted input.
CVE-2026-26795 1 Gl-inet 3 Ar300m16, Ar300m16 Firmware, Gl-ar300m16 2026-06-16 9.8 Critical
GL-iNet GL-AR300M16 v4.3.11 was discovered to contain a command injection vulnerability via the module parameter in the M.get_system_log function. This vulnerability allows attackers to execute arbitrary commands via a crafted input.
CVE-2026-45986 1 Linux 1 Linux Kernel 2026-06-16 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: crypto: ccree - fix a memory leak in cc_mac_digest() Add cc_unmap_result() if cc_map_hash_request_final() fails to prevent potential memory leak.
CVE-2026-38835 1 Tenda 2 W30e, W30e Firmware 2026-06-16 9.8 Critical
Tenda W30E V2.0 V16.01.0.21 was found to contain a command injection vulnerability in the formSetUSBPartitionUmount function via the usbPartitionName parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.
CVE-2026-45997 1 Linux 1 Linux Kernel 2026-06-16 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails If device_add(&sdkp->disk_dev) fails, put_device() runs scsi_disk_release(), which frees the scsi_disk but leaves the gendisk referenced. The device_add_disk() error path in sd_probe() calls put_disk(gd); call put_disk(gd) here to mirror that cleanup.
CVE-2026-36983 1 Dlink 2 Dcs-932l, Dcs-932l Firmware 2026-06-16 7.3 High
D-Link DCS-932L v2.18.01 is vulnerable to Command Injection in the function sub_42EF14 of the file /bin/alphapd. The manipulation of the argument LightSensorControl leads to command injection.
CVE-2026-39054 1 Oinone 1 Pamirs 2026-06-16 7.3 High
Oinone Pamirs 7.0.0 contains a command injection vulnerability in CommandHelper.executeCommands. The method starts a shell process and writes attacker-controlled command strings directly to the process standard input without sanitization. In affected deployments, this can result in arbitrary operating system command execution.