| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: pcc: fix use-after-free and double free in _OSC evaluation
pcc_cpufreq_do_osc() calls acpi_evaluate_object() twice for the
two-phase _OSC negotiation. Between the two calls it freed
output.pointer but left output.length unchanged. Since
acpi_evaluate_object() treats a non-zero length with a non-NULL
pointer as an existing buffer to write into, the second call wrote
into freed memory (use-after-free). The subsequent kfree(output.pointer)
at out_free then freed the same pointer a second time (double free).
Reset output.pointer to NULL and output.length to ACPI_ALLOCATE_BUFFER
after freeing the first result, so ACPICA allocates a fresh buffer for
each phase independently. |
| In the Linux kernel, the following vulnerability has been resolved:
proc: protect ptrace_may_access() with exec_update_lock (part 1)
Fix the easy cases where procfs currently calls ptrace_may_access() without
exec_update_lock protection, where the fix is to simply add the extra lock
or use mm_access():
- do_task_stat(): grab exec_update_lock
- proc_pid_wchan(): grab exec_update_lock
- proc_map_files_lookup(): use mm_access() instead of get_task_mm()
- proc_map_files_readdir(): use mm_access() instead of get_task_mm()
- proc_ns_get_link(): grab exec_update_lock
- proc_ns_readlink(): grab exec_update_lock |
| In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path
In do_cpu_nanosleep(), posix_cpu_timer_create() takes a pid reference
via get_pid() and stores it in timer.it.cpu.pid. If the subsequent
posix_cpu_timer_set() call fails, the function returns immediately
without calling posix_cpu_timer_del() to release the pid reference,
causing a leak.
Fix it by calling posix_cpu_timer_del() before the unlock-and-return
on the error path, consistent with the other exit paths in the same
function. |
| In the Linux kernel, the following vulnerability has been resolved:
s390: Revert support for DCACHE_WORD_ACCESS
load_unaligned_zeropad() reads eight bytes from unaligned addresses and may
cross page boundaries. It handles exceptions which may happen if reading
from the second page results in an exception.
For pages which are donated to the Ultravisor for secure execution purposes
the do_secure_storage_access() exception handler however does not handle
such exceptions correctly. Such an exception may result in an endless
exception loop which will never be resolved.
An attempt to fix this [1] turned out to be not sufficient. For now revert
load_unaligned_zeropad() until this problem has been resolved in a proper
way.
Note that the implementation of load_unaligned_zeropad() itself is
correct. The revert is just a temporary workaround until there is complete
fix for secure storage access exceptions.
[1] commit b00be77302d7 ("s390/mm: Add missing secure storage access fixups for donated memory") |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: do not limit zeroing to orig_size when only red zoning is enabled
When init (zeroing) on allocation is requested, for kmalloc() we
generally have to zero the full object size even if a smaller size is
requested, in order to provide krealloc()'s __GFP_ZERO guarantees.
But if we track the requested size, krealloc() uses that information to
do the right thing, so we can zero only the requested size. With red
zoning also enabled, any extra size became part of the red zone, so it
must not be zeroed and thus we must zero only the requested size.
However the current check is imprecise, and will trigger also when only
SLAB_RED_ZONE is enabled without SLAB_STORE_USER (which enables tracking
the requested size). This means enabling red zoning alone can compromise
krealloc()'s __GFP_ZERO contract.
Fix this by using slub_debug_orig_size() instead, which is the exact
check for whether the requested size is tracked. We don't need to care
if red zoning is also enabled or not. Also update and expand the
comment accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-goodix-spi: validate report size to prevent stack buffer overflow
goodix_hid_set_raw_report() builds a protocol frame in a 128-byte stack
buffer (tmp_buf), writing an 11-12 byte header followed by the
caller-supplied report data. The HID core caps report size at
HID_MAX_BUFFER_SIZE (16384) by default, while the driver does not set
hid_ll_driver.max_buffer_size and performs no bounds checking before
copying the payload:
memcpy(tmp_buf + tx_len, buf, len);
A hidraw SET_REPORT ioctl with a report larger than ~116 bytes
overflows the stack buffer.
Add a size check after constructing the header, rejecting reports that
would exceed the buffer capacity.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix slab-out-of-bounds write in wacom_wac_queue_insert
wacom_wac_queue_insert() calls kfifo_skip() in a loop when the kfifo
doesn't have enough space for the incoming report. If the kfifo is
empty, kfifo_skip() reads stale data left in the kmalloc'd buffer
via __kfifo_peek_n() and interprets it as a record length, advancing
fifo->out by that garbage value. This corrupts the internal kfifo
state, causing kfifo_unused() to return a value much larger than the
actual buffer size, which bypasses __kfifo_in_r()'s guard:
if (len + recsize > kfifo_unused(fifo))
return 0;
kfifo_copy_in() then performs an out-of-bounds memcpy, writing up to
3842 bytes past the 256-byte buffer.
Add a !kfifo_is_empty() condition to the while loop so kfifo_skip()
is never called on an empty fifo, and check the return value of
kfifo_in() to reject reports that are too large for the fifo. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: letsketch: fix UAF on inrange_timer at driver unbind
letsketch_driver does not provide a .remove callback, but
letsketch_probe() arms a per-device timer:
timer_setup(&data->inrange_timer, letsketch_inrange_timeout, 0);
The timer is re-armed from letsketch_raw_event() with a 100 ms
timeout on every pen-in-range report, and its callback dereferences
data->input_tablet to deliver a synthetic BTN_TOOL_PEN release.
letsketch_data is allocated with devm_kzalloc(), and its input_dev
fields are devm-allocated via letsketch_setup_input_tablet(). On
device unbind (USB unplug or rmmod), the HID core runs its default
teardown and devm cleanup frees both letsketch_data and the input
devices. Because no .remove callback exists, nothing drains the
timer first: if raw_event armed it within ~100 ms of the unbind,
the pending timer fires on freed memory. This is a UAF read of
data and of data->input_tablet, followed by input_report_key() /
input_sync() into the freed input_dev.
The same problem can occur on the probe error path: if
hid_hw_start() enabled I/O on an always-poll-quirk device and then
failed, raw_event may have armed the timer before devm releases
data.
Fix by adding a .remove callback that calls hid_hw_stop() first.
hid_hw_stop() synchronously kills the URBs that deliver raw_event(),
so once it returns no path can re-arm the timer. timer_shutdown_sync()
then drains any in-flight callback and permanently disables further
mod_timer() calls. Apply the same timer_shutdown_sync() in the probe
error path so the timer is guaranteed not to outlive data. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: fix out-of-bounds bit access on mt_io_flags
mt_io_flags is a single unsigned long, but mt_process_slot(),
mt_release_pending_palms() and mt_release_contacts() use it as a
per-slot bitmap indexed by the slot number. That slot number is only
bounded by td->maxcontacts, which is taken from the device's
ContactCountMaximum feature report and can be up to 255, not by
BITS_PER_LONG.
As a result, a multitouch device that advertises a large contact count
makes set_bit()/clear_bit() operate past the mt_io_flags word and
corrupt the adjacent members of struct mt_device. The sticky-fingers
release timer is the easiest way to reach this. mt_release_contacts()
runs
for (i = 0; i < mt->num_slots; i++)
clear_bit(i, &td->mt_io_flags);
with num_slots == maxcontacts. For maxcontacts around 250 the loop
clears the bits that overlap td->applications.next, zeroing that list
head, and the list_for_each_entry() that immediately follows then
dereferences NULL. The kernel panics from timer (softirq) context. On a
KASAN build this shows up as a general protection fault in
mt_release_contacts() with a null-ptr-deref at offset 0x58, which is
offsetof(struct mt_application, num_received).
The state is reachable from an untrusted USB or Bluetooth HID
multitouch device; no local privileges are required.
Store the per-slot active state in a separately allocated bitmap sized
for maxcontacts, the same pattern already used for pending_palm_slots,
and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two
"mt_io_flags & MT_IO_SLOTS_MASK" arming checks become
bitmap_empty(td->active_slots, td->maxcontacts).
Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the
same commit to leave the low byte for the slot bits; with the slot bits
gone it fits in bit 0 again, which also keeps it within the unsigned
long on 32-bit. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: appleir: fix UAF on pending key_up_timer in remove()
appleir_remove() runs hid_hw_stop() before timer_delete_sync().
hid_hw_stop() synchronously unregisters the HID input device via
hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(),
which drops the last reference and frees the underlying input_dev when
no userspace handle holds it open.
key_up_tick() reads appleir->input_dev and calls input_report_key() /
input_sync() on it. The timer is armed from appleir_raw_event() with
a HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a
key was pressed shortly before the device is disconnected, the timer
can fire after hid_hw_stop() has freed input_dev but before the
teardown drains it.
A simple reorder is not sufficient. Putting the timer drain first
still leaves a window where a USB URB completion (raw_event) running
during hid_hw_stop() can call mod_timer() and re-arm the timer, which
then fires after hidinput_disconnect() has freed input_dev. The same
URB-completion window also lets raw_event() reach key_up(), key_down()
and battery_flat() directly, all of which dereference
appleir->input_dev.
Introduce a 'removing' flag on struct appleir, gated by the existing
spinlock. appleir_remove() sets the flag under the lock and then
shuts down the timer with timer_shutdown_sync(), which both drains any
in-flight callback and permanently disables further mod_timer() calls.
appleir_raw_event() and key_up_tick() bail out early if the flag is
set, so no path can arm or run the timer, or dereference
appleir->input_dev, after remove() has started tearing down.
The keyrepeat and flatbattery branches of appleir_raw_event()
previously called into the input layer without holding the spinlock;
take it now so the flag check is well-defined. This incidentally
closes a pre-existing read-side race on appleir->current_key in the
keyrepeat branch.
This bug is structurally a sibling of commit 4db2af929279 ("HID:
appletb-kbd: fix UAF in inactivity-timer cleanup path") and has been
present since the driver was introduced. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: lg-g15: cancel pending work on remove to fix a use-after-free
lg_g15_data is allocated with devm and holds a work item. The report
handlers schedule that work straight from device input.
lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key,
and lg_g510_leds_event() does it too. The worker dereferences the
lg_g15_data back through container_of.
The driver had no remove callback and never cancelled the work. So if a
report scheduled the work and the keyboard was then unplugged, devres
freed lg_g15_data while the work was still pending or running, and the
worker touched freed memory. This is a use-after-free. It is reachable
as a race on device unplug.
Add a remove callback that cancels the work before devres frees the
state. g15->work is only initialized for the models that schedule it
(G15, G15 v2, G510). The G13 and Z-10 leave it zeroed, so guard the
cancel on g15->work.func to avoid cancelling a work that was never set
up. The g15 NULL test mirrors the one already in lg_g15_raw_event(). |
| In the Linux kernel, the following vulnerability has been resolved:
hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length
check_and_correct_requested_length() compares (off + len) against
node_size using u32 arithmetic. When the caller passes a large len
value (e.g. from an underflowed subtraction in hfs_brec_remove()),
off + len can wrap past 2^32 and produce a small result, causing the
bounds check to pass when it should fail.
For example, with off=14 and len=0xFFFFFFF2 (underflowed from
data_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6,
which is less than a typical node_size of 512, so the check passes and
the subsequent memmove reads ~4GB past the node buffer.
Fix this by widening the addition to u64 before comparing against
node_size. This prevents the u32 wrap while keeping the logic
straightforward. |
| In the Linux kernel, the following vulnerability has been resolved:
hfs/hfsplus: zero-initialize buffer in hfs_bnode_read
hfs_bnode_read() can return early without writing to the output buffer
when is_bnode_offset_valid() fails or when check_and_correct_requested_
length() corrects the length to zero. Callers such as hfs_bnode_read_
u16() and hfs_bnode_read_u8() pass stack-allocated buffers and use the
result unconditionally, leading to KMSAN uninit-value reports.
Rather than initializing at each individual call site, zero the buffer
at the start of hfs_bnode_read() before any validation checks. This
ensures all callers in both hfs and hfsplus get a deterministic zero
value regardless of which early-return path is taken. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: reject CLEAN_SEGMENTS ioctl with out-of-range segment numbers
Syzbot reported a hung task in nilfs_transaction_begin() where multiple
tasks performing chmod() on a nilfs2 mount blocked for over 143 seconds
waiting to acquire ns_segctor_sem for read:
INFO: task syz.0.17:5918 blocked for more than 143 seconds.
Call Trace:
schedule+0x164/0x360
rwsem_down_read_slowpath+0x6d9/0x940
down_read+0x99/0x2e0
nilfs_transaction_begin+0x364/0x710 fs/nilfs2/segment.c:221
nilfs_setattr+0x124/0x2c0 fs/nilfs2/inode.c:921
notify_change+0xc1a/0xf40
chmod_common+0x273/0x4a0
do_fchmodat+0x12d/0x230
The writer holding ns_segctor_sem was a concurrent
NILFS_IOCTL_CLEAN_SEGMENTS caller, stuck inside printk while emitting
per-element warnings from nilfs_sufile_updatev():
__nilfs_msg+0x373/0x450 fs/nilfs2/super.c:78
nilfs_sufile_updatev+0x21c/0x6d0 fs/nilfs2/sufile.c:186
nilfs_sufile_freev fs/nilfs2/sufile.h:93 [inline]
nilfs_free_segments fs/nilfs2/segment.c:1140 [inline]
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1261 [inline]
nilfs_segctor_do_construct+0x1f55/0x76c0
nilfs_clean_segments+0x3bd/0xa50
nilfs_ioctl_clean_segments fs/nilfs2/ioctl.c:922 [inline]
nilfs_ioctl+0x261f/0x2780
The root cause is that user-supplied segment numbers are not validated
before nilfs_clean_segments() begins doing work; the range check on
each segnum is performed deep inside the call chain by
nilfs_sufile_updatev(), which emits a nilfs_warn() per invalid entry
while still holding the segctor lock and the sufile mi_sem. Under load
(repeated invocations across multiple mounts saturating the global
printk path), the cumulative printk latency keeps ns_segctor_sem held
long enough to trip the hung_task watchdog, blocking concurrent
operations such as chmod() that need ns_segctor_sem for read.
Fix by validating the contents of kbufs[4] in nilfs_clean_segments()
immediately after acquiring ns_segctor_sem via nilfs_transaction_lock().
Holding ns_segctor_sem serializes the check against
nilfs_ioctl_resize(), which can modify ns_nsegments, so the validation
uses a consistent value. Out-of-range segment numbers are rejected
with -EINVAL before any segment-cleaning work begins, so the bad
entries never reach the per-element diagnostic path inside
nilfs_sufile_updatev(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: mtk-jpeg: cancel workqueue on release for supported platforms only
Since a recent fix the mtk_jpeg_release function cancels any pending
or running work present in the driver workqueue using
cancel_work_sync function.
Currently, only the multicore based variants use this workqueue and they
have the jpeg_worker platform data field initialized with a workqueue
callback function. For the others, this field value remain NULL by
default.
The cancel_work_sync function is unconditionally called in
mtk_jpeg_release function, even for the variants that do not use the
workqueue. This call generates a WARN_ON print in __flush_work because
the workqueue callback function presence check fails in __flush_work
function (used by cancel_work_sync).
So, to avoid these warnings, call cancel_work_sync only if a workqueue
callback is defined in platform data. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix exchmaps reservation limit check
xfs_exchmaps_estimate_overhead() adds the bmbt and rmapbt
overhead to a local resblks variable, but the final UINT_MAX
check still tests req->resblks. That is the reservation value
from before the overhead was added.
The computed value is stored back in req->resblks and later passed
to xfs_trans_alloc(), whose block reservation argument is unsigned
int. Check the computed reservation so the existing limit applies
to the value that will be used. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix memory leak in xfs_dqinode_metadir_create()
If xfs_metadir_create() fails in xfs_dqinode_metadir_create(), the current
code returns directly, leaking the allocated update and transaction state.
If the subsequent commit fails, the caller-owned inode reference is left
behind.
Fix this memory leak by routing the create failure path through
xfs_metadir_cancel(). For both create and commit failures, finish and
release any inode returned to the caller, mirroring the unwind pattern in
xfs_metadir_mkdir().
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. Runtime validation
used kprobe fault injection during `mount -o uquota` on a metadir XFS
image. Injecting xfs_metadir_create() reproduced the old active-update path
that left mount stuck later in mount setup; after this change, the same
injection reported cancel_hits=1 and irele_hits=1. Injecting
xfs_metadir_commit() exercised the old inode-reference leak path; after
this change, it reported irele_hits=1. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject fragmented frames in devmap
Devmap broadcast redirects clone the packet for all but the last
destination.
For native XDP, that clone path copies only the linear xdp_frame data,
while fragmented frames keep skb_shared_info in tailroom outside the
linear area. Cloning such a frame leaves XDP_FLAGS_HAS_FRAGS set but
without valid frag metadata, and the later free path can interpret
uninitialized tail data as skb_shared_info, leading to an out-of-bounds
access during frame return.
Reject fragmented native XDP frames in dev_map_enqueue_clone().
Add the same restriction to the generic XDP clone path in
dev_map_redirect_clone(). Generic XDP represents fragmented packets as
nonlinear skbs, and rejecting them here keeps clone-based broadcast
support aligned between native and generic XDP. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Validate BTF repeated field counts before expansion
btf_parse_struct_metas() walks user-supplied BTF during BPF_BTF_LOAD,
and btf_repeat_fields() expands repeatable fields from array elements
into the fixed BTF_FIELDS_MAX scratch array used by btf_parse_fields().
The remaining-capacity check performs the expanded field count calculation
in u32. A malformed BTF can wrap that calculation, causing the check to
pass even when the expanded field count exceeds the scratch array
capacity. The following memcpy() can then write past the end of the
array.
Use checked addition and multiplication before copying repeated fields
and reject impossible counts. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Keep dynamic inner array lookups nullable
An ARRAY_OF_MAPS can use an array created with BPF_F_INNER_MAP as its
inner map template. A concrete inner array with a different max_entries
value can then replace the template.
After a successful outer map lookup, the verifier represents the
resulting map pointer using the inner map template. Const-key lookup
nullness elision consequently uses the template max_entries even though
the runtime helper uses the concrete inner map max_entries.
Do not elide lookup result nullness for maps marked with BPF_F_INNER_MAP,
because the template max_entries does not prove that the key is in bounds
for the concrete runtime map. |
