| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incorrect permission assignment for a critical resource in Armoury Crate allows a local user to bypass the driver’s validation mechanism, resulting in unauthorized read and write access to physical memory.Refer to the '
Security Update for Armoury Crate App ' section on the ASUS Security Advisory for more information. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: ulpi: fix memory leak on ulpi_register() error paths
Commit 01af542392b5 ("usb: ulpi: fix double free in
ulpi_register_interface() error path") removed kfree(ulpi) from
ulpi_register_interface() to fix a double-free when device_register()
fails.
But when ulpi_of_register() or ulpi_read_id() fail before
device_register() is called, the ulpi allocation is leaked.
Add kfree(ulpi) on both error paths to properly clean up the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix potential UAF in create_big_sync
Add hci_conn_valid() check in create_big_sync() to detect stale
connections before proceeding with BIG creation. Handle the
resulting -ECANCELED in create_big_complete() and re-validate the
connection under hci_dev_lock() before dereferencing, matching the
pattern used by create_le_conn_complete() and create_pa_complete().
Keep the hci_conn object alive across the async boundary by taking
a reference via hci_conn_get() when queueing create_big_sync(), and
dropping it in the completion callback. The refcount and the lock
are complementary: the refcount keeps the object allocated, while
hci_dev_lock() serializes hci_conn_hash_del()'s list_del_rcu() on
hdev->conn_hash, as required by hci_conn_del().
hci_conn_put() is called outside hci_dev_unlock() so the final put
(which resolves to kfree() via bt_link_release) does not run under
hdev->lock, though the release path would be safe either way.
Without this, create_big_complete() would unconditionally
dereference the conn pointer on error, causing a use-after-free
via hci_connect_cfm() and hci_conn_del(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix unlocked call to hns_roce_qp_remove()
Sashiko points out that hns_roce_qp_remove() requires the caller to hold
locks. The error flow in hns_roce_create_qp_common() doesn't hold those
locks for the error unwind so it risks corrupting memory.
Grab the same locks the other two callers use. |
| In the Linux kernel, the following vulnerability has been resolved:
block: add pgmap check to biovec_phys_mergeable
biovec_phys_mergeable() is used by the request merge, DMA mapping,
and integrity merge paths to decide if two physically contiguous
bvec segments can be coalesced into one. It currently has no check
for whether the segments belong to different dev_pagemaps.
When zone device memory is registered in multiple chunks, each chunk
gets its own dev_pagemap. A single bio can legitimately contain
bvecs from different pgmaps -- iov_iter_extract_bvecs() breaks at
pgmap boundaries but the outer loop in bio_iov_iter_get_pages()
continues filling the same bio. If such bvecs are physically
contiguous, biovec_phys_mergeable() will coalesce them, making it
impossible to recover the correct pgmap for the merged segment
via page_pgmap().
Add a zone_device_pages_have_same_pgmap() check to prevent merging
bvec segments that span different pgmaps. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete
KASAN reproduces a slab-use-after-free in __xfrm_state_delete()'s
hlist_del_rcu calls under syzkaller load on linux-6.12.y stable
(reproduced on 6.12.47, also reachable via the same code path on
torvalds/master and on the ipsec tree). Nine unique signatures cluster
in the xfrm_state lifecycle, the load-bearing one being:
BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline]
BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline]
BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c
Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435
Workqueue: netns cleanup_net
Call Trace:
__hlist_del / hlist_del_rcu
__xfrm_state_delete
xfrm_state_delete
xfrm_state_flush
xfrm_state_fini
ops_exit_list
cleanup_net
The other observed signatures hit the same slab object from
__xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB
write variant of __xfrm_state_delete, all on the byseq/byspi
hash chains.
__xfrm_state_delete() guards its byseq and byspi unhashes with
value-based predicates:
if (x->km.seq)
hlist_del_rcu(&x->byseq);
if (x->id.spi)
hlist_del_rcu(&x->byspi);
while everywhere else in the file (e.g. state_cache, state_cache_input)
the safer hlist_unhashed() check is used. xfrm_alloc_spi() sets
x->id.spi = newspi inside xfrm_state_lock and then immediately inserts
into byspi, but a path that observes x->id.spi != 0 outside of
xfrm_state_lock can still skip-or-hit the byspi unhash inconsistently
with whether x is actually on the list. The same holds for x->km.seq
versus byseq, and the bydst/bysrc unhashes have no predicate at all,
so a second __xfrm_state_delete() on the same object writes through
LIST_POISON pprev.
The defensive change here:
- Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst,
bysrc, byseq and byspi so a second deletion is a no-op rather
than a write through LIST_POISON pprev. The byseq/byspi nodes
are already initialised in xfrm_state_alloc().
- Test hlist_unhashed() rather than the value predicate for
byseq/byspi, so the unhash decision tracks list state rather than
mutable scalar fields.
Empirical verification: applied this patch on top of v6.12.47, rebuilt,
and re-ran the same syzkaller harness for 1h16m on a previously-crashy
configuration that produced ~100 hits each of slab-use-after-free
Read in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in
__xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at
~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo
confirms the xfrm_state slab is actively allocated and freed during
the run (~143 KiB resident), so the fuzzer is still exercising those
code paths -- they just no longer crash.
Reproduction:
- Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV
- syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db
- 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal
- 9 unique signatures collected in ~9h, all within xfrm_state
lifecycle |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu()
Two bugs exist in the vCPU initialisation path:
1. If a check fails after hyp_pin_shared_mem() succeeds, the cleanup
path jumps to 'unlock' without calling unpin_host_vcpu() or
unpin_host_sve_state(), permanently leaking pin references on the
host vCPU and SVE state pages.
Extract a register_hyp_vcpu() helper that performs the checks and
the store. When register_hyp_vcpu() returns an error, call
unpin_host_vcpu() and unpin_host_sve_state() inline before falling
through to the existing 'unlock' label.
2. register_hyp_vcpu() publishes the new vCPU pointer into
'hyp_vm->vcpus[]' with a bare store, allowing a concurrent caller
of pkvm_load_hyp_vcpu() to observe a partially initialised vCPU
object.
Ensure the store uses smp_store_release() and the load uses
smp_load_acquire(). While 'vm_table_lock' currently serialises the
store and the load, these barriers ensure the reader sees the fully
initialised 'hyp_vcpu' object even if there were a lockless path or
if the lock's own ordering guarantees were insufficient for nested
object initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: microchip-core-qspi: control built-in cs manually
The coreQSPI IP supports only a single chip select, which is
automagically operated by the hardware - set low when the transmit
buffer first gets written to and set high when the number of bytes
written to the TOTALBYTES field of the FRAMES register have been sent on
the bus. Additional devices must use GPIOs for their chip selects.
It was reported to me that if there are two devices attached to this
QSPI controller that the in-built chip select is set low while linux
tries to access the device attached to the GPIO.
This went undetected as the boards that connected multiple devices to
the SPI controller all exclusively used GPIOs for chip selects, not
relying on the built-in chip select at all. It turns out that this was
because the built-in chip select, when controlled automagically, is set
low when active and high when inactive, thereby ruling out its use for
active-high devices or devices that need to transmit with the chip
select disabled.
Modify the driver so that it controls chip select directly, retaining
the behaviour for mem_ops of setting the chip select active for the
entire duration of the transfer in the exec_op callback. For regular
transfers, implement the set_cs callback for the core to use.
As part of this, the existing setup callback, mchp_coreqspi_setup_op(),
is removed. Modifying the CLKIDLE field is not safe to do during
operation when there are multiple devices, so this code is removed
entirely. Setting the MASTER and ENABLE fields is something that can be
done once at probe, it doesn't need to be re-run for each device.
Instead the new setup callback sets the built-in chip select to its
inactive state for active-low devices, as the reset value of the chip
select in software controlled mode is low. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: drop stray 'static' from fast-RX rx_result
ieee80211_invoke_fast_rx() is documented as safe for parallel RX, but
its per-invocation rx_result is declared static. Concurrent callers then
share one instance and can overwrite each other's result between
ieee80211_rx_mesh_data() and the switch on res.
That can make a packet that was queued or consumed by
ieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or make
a packet that should continue return as queued.
Make res an automatic variable so each invocation keeps its own result. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: oss: Fix data race at accessing runtime.oss.trigger
Currently the runtime.oss.trigger field may be accessed concurrently
without protection, which may lead to the data race. And, in this
case, it may lead to more severe problem because it's a bit field; as
writing the data, it may overwrite other bit fields as well, which
confuses the operation completely, as spotted by fuzzing.
Fix it by covering runtime.oss.trigger bit fled also with the existing
params_lock mutex in both snd_pcm_oss_get_trigger() and
snd_pcm_oss_poll(). |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: ADD_ADDR rtx: always decrease sk refcount
When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer().
It should then be released in all cases at the end.
Some (unlikely) checks were returning directly instead of calling
sock_put() to decrease the refcount. Jump to a new 'exit' label to call
__sock_put() (which will become sock_put() in the next commit) to fix
this potential leak.
While at it, drop the '!msk' check which cannot happen because it is
never reset, and explicitly mark the remaining one as "unlikely". |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Add bounds checking to ib_{get,set}_value
The uvd/vce/vcn code accesses the IB at predefined offsets without
checking that the IB is large enough. Check the bounds here. The caller
is responsible for making sure it can handle arbitrary return values.
Also make the idx a uint32_t to prevent overflows causing the condition
to fail. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: fix use-after-free on unbind
The state machine work is scheduled by the interrupt handler and
therefore needs to be cancelled after disabling interrupts to avoid a
potential use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rockchip: rkcif: Add missing MUST_CONNECT flag to pads
The pads missed checks for connected devices which may a null dereference
when the stream is enabled.
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000020
pc : rkcif_interface_enable_streams+0x48/0xf0
lr : rkcif_interface_enable_streams+0x44/0xf0
Call trace:
rkcif_interface_enable_streams+0x48/0xf0
v4l2_subdev_enable_streams+0x26c/0x3f0
rkcif_stream_start_streaming+0x140/0x278
vb2_start_streaming+0x74/0x188
vb2_core_streamon+0xe0/0x1d8
vb2_ioctl_streamon+0x60/0xa8
v4l_streamon+0x2c/0x40
__video_do_ioctl+0x34c/0x400
video_usercopy+0x2d0/0x800
video_ioctl2+0x20/0x60
v4l2_ioctl+0x48/0x78 |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: Defer css percpu_ref kill on rmdir until cgroup is depopulated
A chain of commits going back to v7.0 reworked rmdir to satisfy the
controller invariant that a subsystem's ->css_offline() must not run while
tasks are still doing kernel-side work in the cgroup.
[1] d245698d727a ("cgroup: Defer task cgroup unlink until after the task is done switching out")
[2] a72f73c4dd9b ("cgroup: Don't expose dead tasks in cgroup")
[3] 1b164b876c36 ("cgroup: Wait for dying tasks to leave on rmdir")
[4] 4c56a8ac6869 ("cgroup: Fix cgroup_drain_dying() testing the wrong condition")
[5] 13e786b64bd3 ("cgroup: Increment nr_dying_subsys_* from rmdir context")
[1] moved task cset unlink from do_exit() to finish_task_switch() so a
task's cset link drops only after the task has fully stopped scheduling.
That made tasks past exit_signals() linger on cset->tasks until their final
context switch, which led to a series of problems as what userspace expected
to see after rmdir diverged from what the kernel needs to wait for. [2]-[5]
tried to bridge that divergence: [2] filtered the exiting tasks from
cgroup.procs; [3] had rmdir(2) sleep in TASK_UNINTERRUPTIBLE for them; [4]
fixed the wait's condition; [5] made nr_dying_subsys_* visible
synchronously.
The cgroup_drain_dying() wait in [3] turned out to be a dead end. When the
rmdir caller is also the reaper of a zombie that pins a pidns teardown (e.g.
host PID 1 systemd reaping orphan pids that were re-parented to it during
the same teardown), rmdir blocks in TASK_UNINTERRUPTIBLE waiting for those
pids to free, the pids can't free because PID 1 is the reaper and it's stuck
in rmdir, and the system A-A deadlocks. No internal lock ordering breaks
this; the wait itself is the bug.
The css killing side that drove the original reorder, however, can be made
cleanly asynchronous: ->css_offline() is already async, run from
css_killed_work_fn() driven by percpu_ref_kill_and_confirm(). The fix is to
make that chain start only after all tasks have left the cgroup. rmdir's
user-visible side then returns as soon as cgroup.procs and friends are
empty, while ->css_offline() still runs only after the cgroup is fully
drained.
Verified by the original reproducer (pidns teardown + zombie reaper, runs
under vng) which hangs vanilla and succeeds here, and by per-commit
deterministic repros for [2], [3], [4], [5] with a boot parameter that
widens the post-exit_signals() window so each state is reliably reachable.
Some stress tests on top of that.
cgroup_apply_control_disable() has the same shape of pre-existing race:
when a controller is disabled via subtree_control, kill_css() ran
synchronously while tasks past exit_signals() could still be linked to
the cgroup's csets, and ->css_offline() could fire before they drained.
This patch preserves the existing synchronous behavior at that call site
(kill_css_sync() + kill_css_finish() back-to-back) and a follow-up patch
will defer kill_css_finish() there using a per-css trigger.
This seems like the right approach and I don't see problems with it. The
changes are somewhat invasive but not excessively so, so backporting to
-stable should be okay. If something does turn out to be wrong, the fallback
is to revert the entire chain ([1]-[5]) and rework in the development branch
instead.
v2: Pin cgrp across the deferred destroy work with explicit
cgroup_get()/cgroup_put() around queue_work() and the work_fn. v1
wasn't actually broken (ordered cgroup_offline_wq + queue_work order
in cgroup_task_dead() saved it) but the explicit ref removes the
dependency on those non-obvious invariants. Also note the
pre-existing cgroup_apply_control_disable() race in the description;
a follow-up will defer kill_css_finish() there. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix bo leak in xe_dma_buf_init_obj() on allocation failure
When drm_gpuvm_resv_object_alloc() fails, the pre-allocated storage bo
is not freed. Add xe_bo_free(storage) before returning the error.
xe_dma_buf_init_obj() calls xe_bo_init_locked(), which frees the bo on
error. Therefore, xe_dma_buf_init_obj() must also free the bo on its own
error paths. Otherwise, since xe_gem_prime_import() cannot distinguish
whether the failure originated from xe_dma_buf_init_obj() or from
xe_bo_init_locked(), it cannot safely decide whether the bo should be
freed.
Add comments documenting the ownership semantics: on success, ownership
of storage is transferred to the returned drm_gem_object; on failure,
storage is freed before returning.
v2: Add comments to explain the free logic.
(cherry picked from commit 78a6c5f899f22338bbf48b44fb8950409c5a69b9) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Clear VRAM on allocation to prevent stale data exposure
KFD VRAM allocations set AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE
but not AMDGPU_GEM_CREATE_VRAM_CLEARED, leaving freshly allocated
VRAM with stale data from prior use observable by compute kernels.
The GEM ioctl path already sets VRAM_CLEARED for all userspace
allocations via amdgpu_gem_create_ioctl() and
amdgpu_mode_dumb_create(). The KFD path was missing this flag,
allowing stale page table remnants to leak into user buffers.
This causes crashes in RCCL P2P transport where non-zero data in
ptrExchange/head/tail fields corrupts the protocol handshake. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: put backbone reference on failed claim hash insert
When batadv_bla_add_claim() fails to insert a new claim into the hash, it
leaked a reference to the backbone_gw for which the claim was intended.
Call batadv_backbone_gw_put() on the error path to release the reference
and avoid leaking the backbone_gw object. |
| In the Linux kernel, the following vulnerability has been resolved:
media: saa7164: add ioremap return checks and cleanups
Add checks for ioremap return values in saa7164_dev_setup(). If
ioremap for BAR0 or BAR2 fails, release the already allocated PCI
memory regions, remove the device from the global list, decrement
the device count, and return -ENODEV.
This prevents potential null pointer dereferences and ensures proper
cleanup on memory mapping failures. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: stop caching unowned originator pointers in BAT IV
BAT IV keeps the last-hop neighbor address in each neigh_node, but some
paths also cache an originator pointer derived from a temporary lookup.
That pointer is not owned by the neigh_node and may no longer refer to a
live originator entry after purge handling runs.
Stop storing the auxiliary originator pointer in the BAT IV neighbor
state. When BAT IV needs the neighbor originator data, resolve it from
the stored neighbor address and drop the reference again after use.
[sven: avoid bonding logic for outgoing OGM] |
