| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A security vulnerability has been detected in Belkin F9K1015 1.00.10. Affected by this vulnerability is an unknown functionality of the file /goform/formConnectionSetting. The manipulation of the argument max_Conn leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in Belkin F9K1015 1.00.10. Affected by this issue is some unknown functionality of the file /goform/formL2TPSetup. The manipulation of the argument L2TPUserName results in buffer overflow. The attack may be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/deadline: Fix warning in migrate_enable for boosted tasks
When running the following command:
while true; do
stress-ng --cyclic 30 --timeout 30s --minimize --quiet
done
a warning is eventually triggered:
WARNING: CPU: 43 PID: 2848 at kernel/sched/deadline.c:794
setup_new_dl_entity+0x13e/0x180
...
Call Trace:
<TASK>
? show_trace_log_lvl+0x1c4/0x2df
? enqueue_dl_entity+0x631/0x6e0
? setup_new_dl_entity+0x13e/0x180
? __warn+0x7e/0xd0
? report_bug+0x11a/0x1a0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
enqueue_dl_entity+0x631/0x6e0
enqueue_task_dl+0x7d/0x120
__do_set_cpus_allowed+0xe3/0x280
__set_cpus_allowed_ptr_locked+0x140/0x1d0
__set_cpus_allowed_ptr+0x54/0xa0
migrate_enable+0x7e/0x150
rt_spin_unlock+0x1c/0x90
group_send_sig_info+0xf7/0x1a0
? kill_pid_info+0x1f/0x1d0
kill_pid_info+0x78/0x1d0
kill_proc_info+0x5b/0x110
__x64_sys_kill+0x93/0xc0
do_syscall_64+0x5c/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x7f0dab31f92b
This warning occurs because set_cpus_allowed dequeues and enqueues tasks
with the ENQUEUE_RESTORE flag set. If the task is boosted, the warning
is triggered. A boosted task already had its parameters set by
rt_mutex_setprio, and a new call to setup_new_dl_entity is unnecessary,
hence the WARN_ON call.
Check if we are requeueing a boosted task and avoid calling
setup_new_dl_entity if that's the case. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/tctx: work around xa_store() allocation error issue
syzbot triggered the following WARN_ON:
WARNING: CPU: 0 PID: 16 at io_uring/tctx.c:51 __io_uring_free+0xfa/0x140 io_uring/tctx.c:51
which is the
WARN_ON_ONCE(!xa_empty(&tctx->xa));
sanity check in __io_uring_free() when a io_uring_task is going through
its final put. The syzbot test case includes injecting memory allocation
failures, and it very much looks like xa_store() can fail one of its
memory allocations and end up with ->head being non-NULL even though no
entries exist in the xarray.
Until this issue gets sorted out, work around it by attempting to
iterate entries in our xarray, and WARN_ON_ONCE() if one is found. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix f2fs_bug_on when uninstalling filesystem call f2fs_evict_inode.
creating a large files during checkpoint disable until it runs out of
space and then delete it, then remount to enable checkpoint again, and
then unmount the filesystem triggers the f2fs_bug_on as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/inode.c:896!
CPU: 2 UID: 0 PID: 1286 Comm: umount Not tainted 6.11.0-rc7-dirty #360
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:f2fs_evict_inode+0x58c/0x610
Call Trace:
__die_body+0x15/0x60
die+0x33/0x50
do_trap+0x10a/0x120
f2fs_evict_inode+0x58c/0x610
do_error_trap+0x60/0x80
f2fs_evict_inode+0x58c/0x610
exc_invalid_op+0x53/0x60
f2fs_evict_inode+0x58c/0x610
asm_exc_invalid_op+0x16/0x20
f2fs_evict_inode+0x58c/0x610
evict+0x101/0x260
dispose_list+0x30/0x50
evict_inodes+0x140/0x190
generic_shutdown_super+0x2f/0x150
kill_block_super+0x11/0x40
kill_f2fs_super+0x7d/0x140
deactivate_locked_super+0x2a/0x70
cleanup_mnt+0xb3/0x140
task_work_run+0x61/0x90
The root cause is: creating large files during disable checkpoint
period results in not enough free segments, so when writing back root
inode will failed in f2fs_enable_checkpoint. When umount the file
system after enabling checkpoint, the root inode is dirty in
f2fs_evict_inode function, which triggers BUG_ON. The steps to
reproduce are as follows:
dd if=/dev/zero of=f2fs.img bs=1M count=55
mount f2fs.img f2fs_dir -o checkpoint=disable:10%
dd if=/dev/zero of=big bs=1M count=50
sync
rm big
mount -o remount,checkpoint=enable f2fs_dir
umount f2fs_dir
Let's redirty inode when there is not free segments during checkpoint
is disable. |
| A flaw has been found in Belkin F9K1015 1.00.10. This affects an unknown part of the file /goform/formPPPoESetup. This manipulation of the argument pppUserName causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in Belkin F9K1015 1.00.10. This vulnerability affects unknown code of the file /goform/formPPTPSetup. Such manipulation of the argument pptpUserName leads to buffer overflow. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Belkin F9K1015 1.00.10. This issue affects some unknown processing of the file /goform/formSetLanguage. Performing manipulation of the argument webpage results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in Belkin F9K1015 1.00.10. Impacted is an unknown function of the file /goform/formSetWanStatic. Executing manipulation of the argument m_wan_ipaddr can lead to command injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in Belkin F9K1015 1.00.10. The affected element is an unknown function of the file /goform/formWanTcpipSetup. The manipulation of the argument pppUserName leads to buffer overflow. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in Belkin F9K1015 1.00.10. The impacted element is an unknown function of the file /goform/formWlanMP. The manipulation of the argument ateFunc results in buffer overflow. It is possible to launch the attack remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in Belkin F9K1015 1.00.10. This affects an unknown function of the file /goform/formWlanSetupWPS. This manipulation of the argument webpage causes buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in Belkin F9K1015 1.00.10. This impacts an unknown function of the file /goform/formWpsStart. Such manipulation of the argument pinCode leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in Belkin F9K1015 1.00.10. Affected is an unknown function of the file /goform/mp. Performing manipulation of the argument command results in command injection. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A SQL Injection vulnerability exists in the edit_product.php file of PuneethReddyHC Online Shopping System Advanced 1.0. The product_id GET parameter is unsafely passed to a SQL query without proper validation or parameterization. |
| CPython 3.9 and earlier doesn't disallow configuring an empty list ("[]") for SSLContext.set_npn_protocols() which is an invalid value for the underlying OpenSSL API. This results in a buffer over-read when NPN is used (see CVE-2024-5535 for OpenSSL). This vulnerability is of low severity due to NPN being not widely used and specifying an empty list likely being uncommon in-practice (typically a protocol name would be configured). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: hisi_sas: Add cond_resched() for no forced preemption model
For no forced preemption model kernel, in the scenario where the
expander is connected to 12 high performance SAS SSDs, the following
call trace may occur:
[ 214.409199][ C240] watchdog: BUG: soft lockup - CPU#240 stuck for 22s! [irq/149-hisi_sa:3211]
[ 214.568533][ C240] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[ 214.575224][ C240] pc : fput_many+0x8c/0xdc
[ 214.579480][ C240] lr : fput+0x1c/0xf0
[ 214.583302][ C240] sp : ffff80002de2b900
[ 214.587298][ C240] x29: ffff80002de2b900 x28: ffff1082aa412000
[ 214.593291][ C240] x27: ffff3062a0348c08 x26: ffff80003a9f6000
[ 214.599284][ C240] x25: ffff1062bbac5c40 x24: 0000000000001000
[ 214.605277][ C240] x23: 000000000000000a x22: 0000000000000001
[ 214.611270][ C240] x21: 0000000000001000 x20: 0000000000000000
[ 214.617262][ C240] x19: ffff3062a41ae580 x18: 0000000000010000
[ 214.623255][ C240] x17: 0000000000000001 x16: ffffdb3a6efe5fc0
[ 214.629248][ C240] x15: ffffffffffffffff x14: 0000000003ffffff
[ 214.635241][ C240] x13: 000000000000ffff x12: 000000000000029c
[ 214.641234][ C240] x11: 0000000000000006 x10: ffff80003a9f7fd0
[ 214.647226][ C240] x9 : ffffdb3a6f0482fc x8 : 0000000000000001
[ 214.653219][ C240] x7 : 0000000000000002 x6 : 0000000000000080
[ 214.659212][ C240] x5 : ffff55480ee9b000 x4 : fffffde7f94c6554
[ 214.665205][ C240] x3 : 0000000000000002 x2 : 0000000000000020
[ 214.671198][ C240] x1 : 0000000000000021 x0 : ffff3062a41ae5b8
[ 214.677191][ C240] Call trace:
[ 214.680320][ C240] fput_many+0x8c/0xdc
[ 214.684230][ C240] fput+0x1c/0xf0
[ 214.687707][ C240] aio_complete_rw+0xd8/0x1fc
[ 214.692225][ C240] blkdev_bio_end_io+0x98/0x140
[ 214.696917][ C240] bio_endio+0x160/0x1bc
[ 214.701001][ C240] blk_update_request+0x1c8/0x3bc
[ 214.705867][ C240] scsi_end_request+0x3c/0x1f0
[ 214.710471][ C240] scsi_io_completion+0x7c/0x1a0
[ 214.715249][ C240] scsi_finish_command+0x104/0x140
[ 214.720200][ C240] scsi_softirq_done+0x90/0x180
[ 214.724892][ C240] blk_mq_complete_request+0x5c/0x70
[ 214.730016][ C240] scsi_mq_done+0x48/0xac
[ 214.734194][ C240] sas_scsi_task_done+0xbc/0x16c [libsas]
[ 214.739758][ C240] slot_complete_v3_hw+0x260/0x760 [hisi_sas_v3_hw]
[ 214.746185][ C240] cq_thread_v3_hw+0xbc/0x190 [hisi_sas_v3_hw]
[ 214.752179][ C240] irq_thread_fn+0x34/0xa4
[ 214.756435][ C240] irq_thread+0xc4/0x130
[ 214.760520][ C240] kthread+0x108/0x13c
[ 214.764430][ C240] ret_from_fork+0x10/0x18
This is because in the hisi_sas driver, both the hardware interrupt
handler and the interrupt thread are executed on the same CPU. In the
performance test scenario, function irq_wait_for_interrupt() will always
return 0 if lots of interrupts occurs and the CPU will be continuously
consumed. As a result, the CPU cannot run the watchdog thread. When the
watchdog time exceeds the specified time, call trace occurs.
To fix it, add cond_resched() to execute the watchdog thread. |
| A vulnerability was found in qianfox FoxCMS up to 1.2. This affects an unknown part of the file /index.php/Search of the component Search Page. The manipulation of the argument keyword results in cross site scripting. The attack can be executed remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Flowise before 3.0.5 allows XSS via a FORM element and an INPUT element when an admin views the chat log. |
| Flowise before 3.0.5 allows XSS via an IFRAME element when an admin views the chat log. |
