| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix qgroup reserve leaks in cow_file_range
In the buffered write path, the dirty page owns the qgroup reserve until
it creates an ordered_extent.
Therefore, any errors that occur before the ordered_extent is created
must free that reservation, or else the space is leaked. The fstest
generic/475 exercises various IO error paths, and is able to trigger
errors in cow_file_range where we fail to get to allocating the ordered
extent. Note that because we *do* clear delalloc, we are likely to
remove the inode from the delalloc list, so the inodes/pages to not have
invalidate/launder called on them in the commit abort path.
This results in failures at the unmount stage of the test that look like:
BTRFS: error (device dm-8 state EA) in cleanup_transaction:2018: errno=-5 IO failure
BTRFS: error (device dm-8 state EA) in btrfs_replace_file_extents:2416: errno=-5 IO failure
BTRFS warning (device dm-8 state EA): qgroup 0/5 has unreleased space, type 0 rsv 28672
------------[ cut here ]------------
WARNING: CPU: 3 PID: 22588 at fs/btrfs/disk-io.c:4333 close_ctree+0x222/0x4d0 [btrfs]
Modules linked in: btrfs blake2b_generic libcrc32c xor zstd_compress raid6_pq
CPU: 3 PID: 22588 Comm: umount Kdump: loaded Tainted: G W 6.10.0-rc7-gab56fde445b8 #21
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:close_ctree+0x222/0x4d0 [btrfs]
RSP: 0018:ffffb4465283be00 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffffa1a1818e1000 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffb4465283bbe0 RDI: ffffa1a19374fcb8
RBP: ffffa1a1818e13c0 R08: 0000000100028b16 R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000003 R12: ffffa1a18ad7972c
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f9168312b80(0000) GS:ffffa1a4afcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f91683c9140 CR3: 000000010acaa000 CR4: 00000000000006f0
Call Trace:
<TASK>
? close_ctree+0x222/0x4d0 [btrfs]
? __warn.cold+0x8e/0xea
? close_ctree+0x222/0x4d0 [btrfs]
? report_bug+0xff/0x140
? handle_bug+0x3b/0x70
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? close_ctree+0x222/0x4d0 [btrfs]
generic_shutdown_super+0x70/0x160
kill_anon_super+0x11/0x40
btrfs_kill_super+0x11/0x20 [btrfs]
deactivate_locked_super+0x2e/0xa0
cleanup_mnt+0xb5/0x150
task_work_run+0x57/0x80
syscall_exit_to_user_mode+0x121/0x130
do_syscall_64+0xab/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f916847a887
---[ end trace 0000000000000000 ]---
BTRFS error (device dm-8 state EA): qgroup reserved space leaked
Cases 2 and 3 in the out_reserve path both pertain to this type of leak
and must free the reserved qgroup data. Because it is already an error
path, I opted not to handle the possible errors in
btrfs_free_qgroup_data. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: fix the Out-of-bounds read warning
using index i - 1U may beyond element index
for mc_data[] when i = 0. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: Fix null pointer dereference in trace
ucsi_register_altmode checks IS_ERR for the alt pointer and treats
NULL as valid. When CONFIG_TYPEC_DP_ALTMODE is not enabled,
ucsi_register_displayport returns NULL which causes a NULL pointer
dereference in trace. Rather than return NULL, call
typec_port_register_altmode to register DisplayPort alternate mode
as a non-controllable mode when CONFIG_TYPEC_DP_ALTMODE is not enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: SHAMPO, Fix incorrect page release
Under the following conditions:
1) No skb created yet
2) header_size == 0 (no SHAMPO header)
3) header_index + 1 % MLX5E_SHAMPO_WQ_HEADER_PER_PAGE == 0 (this is the
last page fragment of a SHAMPO header page)
a new skb is formed with a page that is NOT a SHAMPO header page (it
is a regular data page). Further down in the same function
(mlx5e_handle_rx_cqe_mpwrq_shampo()), a SHAMPO header page from
header_index is released. This is wrong and it leads to SHAMPO header
pages being released more than once. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: altera-msgdma: properly free descriptor in msgdma_free_descriptor
Remove list_del call in msgdma_chan_desc_cleanup, this should be the role
of msgdma_free_descriptor. In consequence replace list_add_tail with
list_move_tail in msgdma_free_descriptor.
This fixes the path:
msgdma_free_chan_resources -> msgdma_free_descriptors ->
msgdma_free_desc_list -> msgdma_free_descriptor
which does not correctly free the descriptors as first nodes were not
removed from the list. |
| In the Linux kernel, the following vulnerability has been resolved:
driver: iio: add missing checks on iio_info's callback access
Some callbacks from iio_info structure are accessed without any check, so
if a driver doesn't implement them trying to access the corresponding
sysfs entries produce a kernel oops such as:
[ 2203.527791] Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute
[...]
[ 2203.783416] Call trace:
[ 2203.783429] iio_read_channel_info_avail from dev_attr_show+0x18/0x48
[ 2203.789807] dev_attr_show from sysfs_kf_seq_show+0x90/0x120
[ 2203.794181] sysfs_kf_seq_show from seq_read_iter+0xd0/0x4e4
[ 2203.798555] seq_read_iter from vfs_read+0x238/0x2a0
[ 2203.802236] vfs_read from ksys_read+0xa4/0xd4
[ 2203.805385] ksys_read from ret_fast_syscall+0x0/0x54
[ 2203.809135] Exception stack(0xe0badfa8 to 0xe0badff0)
[ 2203.812880] dfa0: 00000003 b6f10f80 00000003 b6eab000 00020000 00000000
[ 2203.819746] dfc0: 00000003 b6f10f80 7ff00000 00000003 00000003 00000000 00020000 00000000
[ 2203.826619] dfe0: b6e1bc88 bed80958 b6e1bc94 b6e1bcb0
[ 2203.830363] Code: bad PC value
[ 2203.832695] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: core: Prevent USB core invalid event buffer address access
This commit addresses an issue where the USB core could access an
invalid event buffer address during runtime suspend, potentially causing
SMMU faults and other memory issues in Exynos platforms. The problem
arises from the following sequence.
1. In dwc3_gadget_suspend, there is a chance of a timeout when
moving the USB core to the halt state after clearing the
run/stop bit by software.
2. In dwc3_core_exit, the event buffer is cleared regardless of
the USB core's status, which may lead to an SMMU faults and
other memory issues. if the USB core tries to access the event
buffer address.
To prevent this hardware quirk on Exynos platforms, this commit ensures
that the event buffer address is not cleared by software when the USB
core is active during runtime suspend by checking its status before
clearing the buffer address. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: MT - limit max slots
syzbot is reporting too large allocation at input_mt_init_slots(), for
num_slots is supplied from userspace using ioctl(UI_DEV_CREATE).
Since nobody knows possible max slots, this patch chose 1024. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/sclp: Prevent release of buffer in I/O
When a task waiting for completion of a Store Data operation is
interrupted, an attempt is made to halt this operation. If this attempt
fails due to a hardware or firmware problem, there is a chance that the
SCLP facility might store data into buffers referenced by the original
operation at a later time.
Handle this situation by not releasing the referenced data buffers if
the halt attempt fails. For current use cases, this might result in a
leak of few pages of memory in case of a rare hardware/firmware
malfunction. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not BUG_ON() when freeing tree block after error
When freeing a tree block, at btrfs_free_tree_block(), if we fail to
create a delayed reference we don't deal with the error and just do a
BUG_ON(). The error most likely to happen is -ENOMEM, and we have a
comment mentioning that only -ENOMEM can happen, but that is not true,
because in case qgroups are enabled any error returned from
btrfs_qgroup_trace_extent_post() (can be -EUCLEAN or anything returned
from btrfs_search_slot() for example) can be propagated back to
btrfs_free_tree_block().
So stop doing a BUG_ON() and return the error to the callers and make
them abort the transaction to prevent leaking space. Syzbot was
triggering this, likely due to memory allocation failure injection. |
| In the Linux kernel, the following vulnerability has been resolved:
xen: privcmd: Switch from mutex to spinlock for irqfds
irqfd_wakeup() gets EPOLLHUP, when it is called by
eventfd_release() by way of wake_up_poll(&ctx->wqh, EPOLLHUP), which
gets called under spin_lock_irqsave(). We can't use a mutex here as it
will lead to a deadlock.
Fix it by switching over to a spin lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: line6: Fix racy access to midibuf
There can be concurrent accesses to line6 midibuf from both the URB
completion callback and the rawmidi API access. This could be a cause
of KMSAN warning triggered by syzkaller below (so put as reported-by
here).
This patch protects the midibuf call of the former code path with a
spinlock for avoiding the possible races. |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: fix a possible DMA corruption
ARCH_DMA_MINALIGN was defined as 16 - this is too small - it may be
possible that two unrelated 16-byte allocations share a cache line. If
one of these allocations is written using DMA and the other is written
using cached write, the value that was written with DMA may be
corrupted.
This commit changes ARCH_DMA_MINALIGN to be 128 on PA20 and 32 on PA1.1 -
that's the largest possible cache line size.
As different parisc microarchitectures have different cache line size, we
define arch_slab_minalign(), cache_line_size() and
dma_get_cache_alignment() so that the kernel may tune slab cache
parameters dynamically, based on the detected cache line size. |
| In the Linux kernel, the following vulnerability has been resolved:
fou: remove warn in gue_gro_receive on unsupported protocol
Drop the WARN_ON_ONCE inn gue_gro_receive if the encapsulated type is
not known or does not have a GRO handler.
Such a packet is easily constructed. Syzbot generates them and sets
off this warning.
Remove the warning as it is expected and not actionable.
The warning was previously reduced from WARN_ON to WARN_ON_ONCE in
commit 270136613bf7 ("fou: Do WARN_ON_ONCE in gue_gro_receive for bad
proto callbacks"). |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: fix null ptr deref in dtInsertEntry
[syzbot reported]
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 5061 Comm: syz-executor404 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
RIP: 0010:dtInsertEntry+0xd0c/0x1780 fs/jfs/jfs_dtree.c:3713
...
[Analyze]
In dtInsertEntry(), when the pointer h has the same value as p, after writing
name in UniStrncpy_to_le(), p->header.flag will be cleared. This will cause the
previously true judgment "p->header.flag & BT-LEAF" to change to no after writing
the name operation, this leads to entering an incorrect branch and accessing the
uninitialized object ih when judging this condition for the second time.
[Fix]
After got the page, check freelist first, if freelist == 0 then exit dtInsert()
and return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: prevent potential speculation leaks in gpio_device_get_desc()
Userspace may trigger a speculative read of an address outside the gpio
descriptor array.
Users can do that by calling gpio_ioctl() with an offset out of range.
Offset is copied from user and then used as an array index to get
the gpio descriptor without sanitization in gpio_device_get_desc().
This change ensures that the offset is sanitized by using
array_index_nospec() to mitigate any possibility of speculative
information leaks.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: avoid BUG_ON() while continue reshape after reassembling
Currently, mdadm support --revert-reshape to abort the reshape while
reassembling, as the test 07revert-grow. However, following BUG_ON()
can be triggerred by the test:
kernel BUG at drivers/md/raid5.c:6278!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
irq event stamp: 158985
CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94
RIP: 0010:reshape_request+0x3f1/0xe60
Call Trace:
<TASK>
raid5_sync_request+0x43d/0x550
md_do_sync+0xb7a/0x2110
md_thread+0x294/0x2b0
kthread+0x147/0x1c0
ret_from_fork+0x59/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
Root cause is that --revert-reshape update the raid_disks from 5 to 4,
while reshape position is still set, and after reassembling the array,
reshape position will be read from super block, then during reshape the
checking of 'writepos' that is caculated by old reshape position will
fail.
Fix this panic the easy way first, by converting the BUG_ON() to
WARN_ON(), and stop the reshape if checkings fail.
Noted that mdadm must fix --revert-shape as well, and probably md/raid
should enhance metadata validation as well, however this means
reassemble will fail and there must be user tools to fix the wrong
metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: disallow setting special AP channel widths
Setting the AP channel width is meant for use with the normal
20/40/... MHz channel width progression, and switching around
in S1G or narrow channels isn't supported. Disallow that. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/pm: Fix the null pointer dereference in apply_state_adjust_rules
Check the pointer value to fix potential null pointer
dereference |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Fix the null pointer dereference for vega10_hwmgr
Check return value and conduct null pointer handling to avoid null pointer dereference. |
