| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in Quarkus where HTTP security policies are not sanitizing certain character permutations correctly when accepting requests, resulting in incorrect evaluation of permissions. This issue could allow an attacker to bypass the security policy altogether, resulting in unauthorized endpoint access and possibly a denial of service. |
| A Server-Side Request Forgery (SSRF) bypass vulnerability exists in “stunnel” 5.79 and lower when configured in SOCKS proxy mode. This flaw allows a client to bypass intended localhost restrictions by using IPv4-mapped IPv6 addresses (e.g., “::ffff:127.0.0.1”) or unspecified addresses ("0.0.0.0", "::"), enabling access to loopback-only services on the "stunnel" host that should not be network-reachable. |
| A flaw was found in the backchannel logout endpoint of the keycloak-services component, which is part of the Red Hat Build of Keycloak. This component handles authentication and session management for applications. The issue occurs when an OIDC identity provider is configured to skip signature validation. In this specific setup, the system incorrectly accepts logout requests that have no cryptographic signature. An attacker who knows certain technical details about a user's session can use this flaw to force that user to be logged out, potentially disrupting their work. |
| A stack-based out-of-bounds read vulnerability exists in the "s_vlog" function of stunnel, when handling oversized log messages via "vsnprintf". A remote attacker with network access to a stunnel service can send protocol inputs that trigger a log message longer than 1024 bytes, leading to an out-of-bounds stack read and a potential crash. In certain corner cases, the same vulnerability could be used to replace a series of trailing "\n" characters with "\0". |
| ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.3.1, Address4 accepts an octet written with a leading zero and decodes it as decimal, while the WHATWG URL host parser, inet_aton, and getaddrinfo all decode a leading zero as octal. The library and the network stack therefore disagree about which host a string names. new Address4('012.0.0.1') reports correctForm() of 12.0.0.1 and isPrivate() of false, but fetch('http://012.0.0.1/') connects to 10.0.0.1. An application that builds a network trust-boundary decision on these checks, for example a filter intended to block Server-Side Request Forgery, or SSRF, will classify an internal target as external and allow the request. The defect is in the parse gate rather than in any one classifier, so every consumer of Address4 inherits it: isPrivate(), isLoopback(), isLinkLocal(), isCGNAT(), isInSubnet(), isHostInSubnet(), and correctForm() are all computed from the mis-decoded octets. This issue is fixed in version 10.3.1. |
| A vulnerability was found in OIDC-Client. When using the RH SSO OIDC adapter with EAP 7.x or when using the elytron-oidc-client subsystem with EAP 8.x, authorization code injection attacks can occur, allowing an attacker to inject a stolen authorization code into the attacker's own session with the client with a victim's identity. This is usually done with a Man-in-the-Middle (MitM) or phishing attack. |
| Red Hat Product Security has come to the conclusion that this CVE is not needed. |
| In the Linux kernel, the following vulnerability has been resolved:
vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame
Andrew and Nikolay reported connectivity issues with Cilium's service
load-balancing in case of vmxnet3.
If a BPF program for native XDP adds an encapsulation header such as
IPIP and transmits the packet out the same interface, then in case
of vmxnet3 a corrupted packet is being sent and subsequently dropped
on the path.
vmxnet3_xdp_xmit_frame() which is called e.g. via vmxnet3_run_xdp()
through vmxnet3_xdp_xmit_back() calculates an incorrect DMA address:
page = virt_to_page(xdpf->data);
tbi->dma_addr = page_pool_get_dma_addr(page) +
VMXNET3_XDP_HEADROOM;
dma_sync_single_for_device(&adapter->pdev->dev,
tbi->dma_addr, buf_size,
DMA_TO_DEVICE);
The above assumes a fixed offset (VMXNET3_XDP_HEADROOM), but the XDP
BPF program could have moved xdp->data. While the passed buf_size is
correct (xdpf->len), the dma_addr needs to have a dynamic offset which
can be calculated as xdpf->data - (void *)xdpf, that is, xdp->data -
xdp->data_hard_start. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_set_pipapo: fix initial map fill
The initial buffer has to be inited to all-ones, but it must restrict
it to the size of the first field, not the total field size.
After each round in the map search step, the result and the fill map
are swapped, so if we have a set where f->bsize of the first element
is smaller than m->bsize_max, those one-bits are leaked into future
rounds result map.
This makes pipapo find an incorrect matching results for sets where
first field size is not the largest.
Followup patch adds a test case to nft_concat_range.sh selftest script.
Thanks to Stefano Brivio for pointing out that we need to zero out
the remainder explicitly, only correcting memset() argument isn't enough. |
| In the Linux kernel, the following vulnerability has been resolved:
dm array: fix releasing a faulty array block twice in dm_array_cursor_end
When dm_bm_read_lock() fails due to locking or checksum errors, it
releases the faulty block implicitly while leaving an invalid output
pointer behind. The caller of dm_bm_read_lock() should not operate on
this invalid dm_block pointer, or it will lead to undefined result.
For example, the dm_array_cursor incorrectly caches the invalid pointer
on reading a faulty array block, causing a double release in
dm_array_cursor_end(), then hitting the BUG_ON in dm-bufio cache_put().
Reproduce steps:
1. initialize a cache device
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc $262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. wipe the second array block offline
dmsteup remove cache cmeta cdata corig
mapping_root=$(dd if=/dev/sdc bs=1c count=8 skip=192 \
2>/dev/null | hexdump -e '1/8 "%u\n"')
ablock=$(dd if=/dev/sdc bs=1c count=8 skip=$((4096*mapping_root+2056)) \
2>/dev/null | hexdump -e '1/8 "%u\n"')
dd if=/dev/zero of=/dev/sdc bs=4k count=1 seek=$ablock
3. try reopen the cache device
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc $262144"
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
Kernel logs:
(snip)
device-mapper: array: array_block_check failed: blocknr 0 != wanted 10
device-mapper: block manager: array validator check failed for block 10
device-mapper: array: get_ablock failed
device-mapper: cache metadata: dm_array_cursor_next for mapping failed
------------[ cut here ]------------
kernel BUG at drivers/md/dm-bufio.c:638!
Fix by setting the cached block pointer to NULL on errors.
In addition to the reproducer described above, this fix can be
verified using the "array_cursor/damaged" test in dm-unit:
dm-unit run /pdata/array_cursor/damaged --kernel-dir <KERNEL_DIR> |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: fix overflow inside virtnet_rq_alloc
When the frag just got a page, then may lead to regression on VM.
Specially if the sysctl net.core.high_order_alloc_disable value is 1,
then the frag always get a page when do refill.
Which could see reliable crashes or scp failure (scp a file 100M in size
to VM).
The issue is that the virtnet_rq_dma takes up 16 bytes at the beginning
of a new frag. When the frag size is larger than PAGE_SIZE,
everything is fine. However, if the frag is only one page and the
total size of the buffer and virtnet_rq_dma is larger than one page, an
overflow may occur.
The commit f9dac92ba908 ("virtio_ring: enable premapped mode whatever
use_dma_api") introduced this problem. And we reverted some commits to
fix this in last linux version. Now we try to enable it and fix this
bug directly.
Here, when the frag size is not enough, we reduce the buffer len to fix
this problem. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: mediatek: add intf release flow when usb disconnect
MediaTek claim an special usb intr interface for ISO data transmission.
The interface need to be released before unregistering hci device when
usb disconnect. Removing BT usb dongle without properly releasing the
interface may cause Kernel panic while unregister hci device. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: clear XPRT_SOCK_UPD_TIMEOUT when reset transport
Since transport->sock has been set to NULL during reset transport,
XPRT_SOCK_UPD_TIMEOUT also needs to be cleared. Otherwise, the
xs_tcp_set_socket_timeouts() may be triggered in xs_tcp_send_request()
to dereference the transport->sock that has been set to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: fix NL80211_ATTR_MLO_LINK_ID off-by-one
Since the netlink attribute range validation provides inclusive
checking, the *max* of attribute NL80211_ATTR_MLO_LINK_ID should be
IEEE80211_MLD_MAX_NUM_LINKS - 1 otherwise causing an off-by-one.
One crash stack for demonstration:
==================================================================
BUG: KASAN: wild-memory-access in ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939
Read of size 6 at addr 001102080000000c by task fuzzer.386/9508
CPU: 1 PID: 9508 Comm: syz.1.386 Not tainted 6.1.70 #2
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106
print_report+0xe0/0x750 mm/kasan/report.c:398
kasan_report+0x139/0x170 mm/kasan/report.c:495
kasan_check_range+0x287/0x290 mm/kasan/generic.c:189
memcpy+0x25/0x60 mm/kasan/shadow.c:65
ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939
rdev_tx_control_port net/wireless/rdev-ops.h:761 [inline]
nl80211_tx_control_port+0x7b3/0xc40 net/wireless/nl80211.c:15453
genl_family_rcv_msg_doit+0x22e/0x320 net/netlink/genetlink.c:756
genl_family_rcv_msg net/netlink/genetlink.c:833 [inline]
genl_rcv_msg+0x539/0x740 net/netlink/genetlink.c:850
netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508
genl_rcv+0x24/0x40 net/netlink/genetlink.c:861
netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline]
netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352
netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874
sock_sendmsg_nosec net/socket.c:716 [inline]
__sock_sendmsg net/socket.c:728 [inline]
____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499
___sys_sendmsg+0x21c/0x290 net/socket.c:2553
__sys_sendmsg net/socket.c:2582 [inline]
__do_sys_sendmsg net/socket.c:2591 [inline]
__se_sys_sendmsg+0x19e/0x270 net/socket.c:2589
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Update the policy to ensure correct validation. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
The usage of rcu_read_(un)lock while inside list_for_each_entry_rcu is
not safe since for the most part entries fetched this way shall be
treated as rcu_dereference:
Note that the value returned by rcu_dereference() is valid
only within the enclosing RCU read-side critical section [1]_.
For example, the following is **not** legal::
rcu_read_lock();
p = rcu_dereference(head.next);
rcu_read_unlock();
x = p->address; /* BUG!!! */
rcu_read_lock();
y = p->data; /* BUG!!! */
rcu_read_unlock(); |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
hci_devcd_append may lead to the release of the skb, so it cannot be
accessed once it is called.
==================================================================
BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk]
Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82
CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G U 6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c
Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024
Workqueue: events btusb_rx_work [btusb]
Call Trace:
<TASK>
dump_stack_lvl+0xfd/0x150
print_report+0x131/0x780
kasan_report+0x177/0x1c0
btmtk_process_coredump+0x2a7/0x2d0 [btmtk 03edd567dd71a65958807c95a65db31d433e1d01]
btusb_recv_acl_mtk+0x11c/0x1a0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
btusb_rx_work+0x9e/0xe0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
</TASK>
Allocated by task 82:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
__kasan_slab_alloc+0x4e/0x60
kmem_cache_alloc+0x19f/0x360
skb_clone+0x132/0xf70
btusb_recv_acl_mtk+0x104/0x1a0 [btusb]
btusb_rx_work+0x9e/0xe0 [btusb]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
Freed by task 1733:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
kasan_save_free_info+0x28/0xb0
____kasan_slab_free+0xfd/0x170
kmem_cache_free+0x183/0x3f0
hci_devcd_rx+0x91a/0x2060 [bluetooth]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
The buggy address belongs to the object at ffff888033cfab40
which belongs to the cache skbuff_head_cache of size 232
The buggy address is located 112 bytes inside of
freed 232-byte region [ffff888033cfab40, ffff888033cfac28)
The buggy address belongs to the physical page:
page:00000000a174ba93 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33cfa
head:00000000a174ba93 order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0
anon flags: 0x4000000000000840(slab|head|zone=1)
page_type: 0xffffffff()
raw: 4000000000000840 ffff888100848a00 0000000000000000 0000000000000001
raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888033cfaa80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
ffff888033cfab00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff888033cfab80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888033cfac00: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
ffff888033cfac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Check if we need to call hci_devcd_complete before calling
hci_devcd_append. That requires that we check data->cd_info.cnt >=
MTK_COREDUMP_NUM instead of data->cd_info.cnt > MTK_COREDUMP_NUM, as we
increment data->cd_info.cnt only once the call to hci_devcd_append
succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ieee802154: do not leave a dangling sk pointer in ieee802154_create()
sock_init_data() attaches the allocated sk object to the provided sock
object. If ieee802154_create() fails later, the allocated sk object is
freed, but the dangling pointer remains in the provided sock object, which
may allow use-after-free.
Clear the sk pointer in the sock object on error. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Use disable_delayed_work_sync
This makes use of disable_delayed_work_sync instead
cancel_delayed_work_sync as it not only cancel the ongoing work but also
disables new submit which is disarable since the object holding the work
is about to be freed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix not checking skb length on hci_acldata_packet
This fixes not checking if skb really contains an ACL header otherwise
the code may attempt to access some uninitilized/invalid memory past the
valid skb->data. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix use-after-free in device_for_each_child()
Syzbot has reported the following KASAN splat:
BUG: KASAN: slab-use-after-free in device_for_each_child+0x18f/0x1a0
Read of size 8 at addr ffff88801f605308 by task kbnepd bnep0/4980
CPU: 0 UID: 0 PID: 4980 Comm: kbnepd bnep0 Not tainted 6.12.0-rc4-00161-gae90f6a6170d #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x100/0x190
? device_for_each_child+0x18f/0x1a0
print_report+0x13a/0x4cb
? __virt_addr_valid+0x5e/0x590
? __phys_addr+0xc6/0x150
? device_for_each_child+0x18f/0x1a0
kasan_report+0xda/0x110
? device_for_each_child+0x18f/0x1a0
? __pfx_dev_memalloc_noio+0x10/0x10
device_for_each_child+0x18f/0x1a0
? __pfx_device_for_each_child+0x10/0x10
pm_runtime_set_memalloc_noio+0xf2/0x180
netdev_unregister_kobject+0x1ed/0x270
unregister_netdevice_many_notify+0x123c/0x1d80
? __mutex_trylock_common+0xde/0x250
? __pfx_unregister_netdevice_many_notify+0x10/0x10
? trace_contention_end+0xe6/0x140
? __mutex_lock+0x4e7/0x8f0
? __pfx_lock_acquire.part.0+0x10/0x10
? rcu_is_watching+0x12/0xc0
? unregister_netdev+0x12/0x30
unregister_netdevice_queue+0x30d/0x3f0
? __pfx_unregister_netdevice_queue+0x10/0x10
? __pfx_down_write+0x10/0x10
unregister_netdev+0x1c/0x30
bnep_session+0x1fb3/0x2ab0
? __pfx_bnep_session+0x10/0x10
? __pfx_lock_release+0x10/0x10
? __pfx_woken_wake_function+0x10/0x10
? __kthread_parkme+0x132/0x200
? __pfx_bnep_session+0x10/0x10
? kthread+0x13a/0x370
? __pfx_bnep_session+0x10/0x10
kthread+0x2b7/0x370
? __pfx_kthread+0x10/0x10
ret_from_fork+0x48/0x80
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 4974:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kmalloc_noprof+0x1d1/0x440
hci_alloc_dev_priv+0x1d/0x2820
__vhci_create_device+0xef/0x7d0
vhci_write+0x2c7/0x480
vfs_write+0x6a0/0xfc0
ksys_write+0x12f/0x260
do_syscall_64+0xc7/0x250
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 4979:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x4f/0x70
kfree+0x141/0x490
hci_release_dev+0x4d9/0x600
bt_host_release+0x6a/0xb0
device_release+0xa4/0x240
kobject_put+0x1ec/0x5a0
put_device+0x1f/0x30
vhci_release+0x81/0xf0
__fput+0x3f6/0xb30
task_work_run+0x151/0x250
do_exit+0xa79/0x2c30
do_group_exit+0xd5/0x2a0
get_signal+0x1fcd/0x2210
arch_do_signal_or_restart+0x93/0x780
syscall_exit_to_user_mode+0x140/0x290
do_syscall_64+0xd4/0x250
entry_SYSCALL_64_after_hwframe+0x77/0x7f
In 'hci_conn_del_sysfs()', 'device_unregister()' may be called when
an underlying (kobject) reference counter is greater than 1. This
means that reparenting (happened when the device is actually freed)
is delayed and, during that delay, parent controller device (hciX)
may be deleted. Since the latter may create a dangling pointer to
freed parent, avoid that scenario by reparenting to NULL explicitly. |
