| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Fix dev_iommu memory leak when device_add fails in iommu_mock_device_add
iommu_mock_device_add() first calls iommu_fwspec_init(), which on
success allocates both dev->iommu (via dev_iommu_get()) and
dev->iommu->fwspec. If the subsequent device_add(dev) call fails,
the error path only calls iommu_fwspec_free(dev), which frees
fwspec but leaves dev->iommu still allocated.
This triggers the following kmemleak report when fuzzing with Syzkaller:
BUG: memory leak
unreferenced object 0xffff888011e0a200 (size 192):
comm "syz.1.1695", pid 24885, jiffies 4295222527
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N..
ff ff ff ff 00 00 00 00 ff ff ff ff ff ff ff ff ................
backtrace (crc 25df5bb3):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4575 [inline]
slab_alloc_node mm/slub.c:4899 [inline]
__kmalloc_cache_noprof+0x47a/0x710 mm/slub.c:5415
kmalloc_noprof include/linux/slab.h:950 [inline]
kzalloc_noprof include/linux/slab.h:1188 [inline]
dev_iommu_get+0x10c/0x1a0 drivers/iommu/iommu.c:408
iommu_fwspec_init+0x288/0x4d0 drivers/iommu/iommu.c:3087
iommu_mock_device_add+0x46/0xb0 drivers/iommu/iommu.c:385
mock_dev_create drivers/iommu/iommufd/selftest.c:1025 [inline]
iommufd_test_mock_domain drivers/iommu/iommufd/selftest.c:1066 [inline]
iommufd_test+0x2f8a/0x6190 drivers/iommu/iommufd/selftest.c:2072
iommufd_fops_ioctl+0x367/0x540 drivers/iommu/iommufd/main.c:533
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fix this by calling dev_iommu_free(dev) instead of iommu_fwspec_free(dev)
in the device_add() failure path. dev_iommu_free() frees both fwspec
and the outer dev_iommu struct and clears dev->iommu. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Release current IOAS on xa_store() failure
iommufd_take_all_iova_rwsem() takes an object reference and the
iova_rwsem write lock before storing the IOAS in the temporary ioas_list
xarray.
If xa_store() fails, the current IOAS has not been inserted into
ioas_list yet. iommufd_release_all_iova_rwsem() only unwinds IOAS
objects already present in that xarray, so it cannot release the current
IOAS.
Release the current IOAS rwsem and object reference before unwinding the
previously stored entries. |
| AVideo through commit c3edcc274c389816d434acadac07ee78eaf330c1 contains a stored cross-site scripting vulnerability in the Bookmark plugin where chapter names are not encoded before being concatenated into public watch-page HTML. A video owner can inject malicious scripts via the bookmark name parameter, and every visitor of that video executes the payload in the AVideo origin. |
| WWBN AVideo through commit c3edcc274c389816d434acadac07ee78eaf330c1 contains a reflected cross-site scripting vulnerability in confirmLivePassword.php that copies REQUEST_URI into a form action attribute without encoding. Attackers can craft a malicious URL with a quote character to break out of the action attribute and inject event handlers that execute in the victim's browser within the site origin. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: think-lmi: Free system certificate signatures
Multi-certificate support also allows the system authentication object
to store ->signature and ->save_signature, which leak when the driver is
removed. Free the signatures to avoid leaking memory. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/query: cap user size passed to copy_struct_to_user
io_handle_query_entry() clamps hdr.size for the inbound copy_from_user()
but keeps the original user value as usize. copy_struct_to_user() uses
that usize and, when it is larger than the kernel result, clear_user()s
the trailing bytes.
As hdr.size is a __u32, a query can request nearly 4 GiB of zeroing,
including on the error path where res_size stays 0. The interface is
reachable without a ring via IORING_REGISTER_QUERY.
Reject sizes larger than PAGE_SIZE, as recommended for copy_struct_*
interfaces. |
| In the Linux kernel, the following vulnerability has been resolved:
net: l2tp: do not propagate multicast notification errors
The tunnel create, tunnel modify, session create, and session modify
netlink handlers send multicast notifications through helpers that can fail
while allocating or encoding a message, or while multicasting it.
For tunnel and session create/modify, a notification is sent after the live
operation has completed. Returning a best-effort notification error as the
command result can therefore report failure for an operation that already
committed and can cause callers to retry and accumulate live objects.
Keep sending notifications for listener visibility, but do not propagate
their best-effort status as the command result. This also keeps the tunnel
modify command consistent with the other notification-only paths. |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: sm501: Fix potential memory leaks during remove
The memory allocated for struct sm501_devdata in sm501_pci_probe() and
sm501_plat_probe() is not freed by the corresponding remove functions
sm501_pci_remove() and sm501_plat_remove(). Fix that by adding a call to
kfree(). |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: validate on-media seg_num against the cache device size
seg_num is read from the crc32c-only superblock, so whoever supplies the
cache device on a table load (CAP_SYS_ADMIN) controls it. It sizes
cache->segments[] and is the value every later on-media segment id is
bounded against, yet it is never checked against the device. Because
cache_dev->mapping is the direct map of the pmem, CACHE_DEV_SEGMENT() for
a segment id past the device resolves to ordinary kernel memory beyond
the mapping; a new-cache init reaching such an id has cache_seg_init() ->
cache_dev_zero_range() memset() 12 KiB over that memory -- an
out-of-bounds write into the kernel heap at table load. A zero seg_num
makes the segment allocations ZERO_SIZE_PTR.
Reject a seg_num that is zero, larger than the device can hold, or larger
than PCACHE_CACHE_SEGS_MAX before it is used. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: dvm: fix memory leak in iwl_op_mode_dvm_start()
In iwl_op_mode_dvm_start(), jumping to out_free_eeprom currently bypasses
the out_free_eeprom_blob label. Consequently, error paths triggered after
successfully parsing the EEPROM free priv->nvm_data but leak
priv->eeprom_blob.
Fix this memory leak by reordering the error handling labels so
that out_free_eeprom falls through to out_free_eeprom_blob.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc6.
An x86_64 allyesconfig build showed no new warnings. As we do not have
supported Intel DVM wireless hardware and firmware to test with, no
runtime testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtlwifi: rtl8192du: Fix possible memory leak in rtl92du_init_sw_vars()
The memory allocated inside rtl92du_init_shared_data() is not freed in
any of the subsequent error paths in rtl92du_init_sw_vars().
Fix that by adding a call to rtl92du_deinit_shared_data() in the error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: pci: fix resource leak on failed NAPI setup
rtw_pci_probe() allocates PCI resources through
rtw_pci_setup_resource() before it sets up NAPI. If
rtw_pci_napi_init() fails, the error path jumps straight to
err_pci_declaim and skips rtw_pci_destroy(), leaving the PCI
resources allocated by rtw_pci_setup_resource() behind.
Add a dedicated cleanup label for the NAPI setup failure path so probe
destroys the PCI resources.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing current
mainline kernels. The tool is still under development and is not yet
publicly available. Manual inspection confirms that the bug is still
present in v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
suitable rtw88 PCI board to test with, no runtime testing was able to be
performed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix TX DMA mapping leak for AddBA req frames
mt7996/mt7992 hand the firmware a HW MAC-TXP for AddBA req action frames
(MT_TXD7_MAC_TXD, set in mt7996_mac_write_txwi_80211()), but are otherwise
FW-TXP devices. On tx free mt76_connac_txp_skb_unmap() therefore decodes
the per-frame txp as a struct mt76_connac_fw_txp. For a MAC-TXP the
fw_txp.nbuf byte aliases the AddBA TID word (MT_TXP1_TID_ADDBA), which is
always zero, so the unmap loop runs zero times and the skb DMA mapping in
buf[1] is never unmapped. buf[1].skip_unmap is set unconditionally, so the
generic DMA-ring cleanup skips it as well.
Each AddBA req therefore leaks one TX DMA mapping, roughly one per
(re)association. With WED enabled these mappings are bounced through the
WED swiotlb pool, so under continuous client reconnect churn the pool is
exhausted after ~1-2 days, after which DMA mapping fails for WED, the WiFi
MCU and other on-SoC consumers.
Keep the deferred (token release) unmap that the design relies on, and add
an mt7996-specific txp unmap that inspects MT_TXD7_MAC_TXD and unmaps
buf[1] from the MAC-TXP layout for those frames, delegating to
mt76_connac_txp_skb_unmap() otherwise. |
| There is an HTML injection vulnerability in Esri Portal for ArcGIS versions 11.3 and prior that allows a remote attacker with administrative privileges to insert arbitrary HTML into an administrative API. Users working with ArcGIS Enterprise 11.1, and 11.3 are encouraged to patch. All users are advised to upgrade to the latest long-term support release. |
| There is an HTML injection vulnerability in Esri Portal for ArcGIS versions 11.5 and prior that allows a remote, highly priviliged attacker to insert arbitrary HTML into the Portal for ArcGIS Home application. Users working with ArcGIS Enterprise 11.1, 11.3, and 11.5 are encouraged to patch. All users are advised to upgrade to the latest long-term support release. |
| FileRun before 2026.3.0 contains an OS command injection vulnerability caused by a no-op redefinition of escapeshellcmd() in CLI.php that strips shell-metacharacter escaping, allowing attacker-controlled input to reach an exec() sink unsanitized. Attackers can exploit this through an interactive path via image_preview.php with a crafted args parameter requiring superuser authentication, or through a persistent path by storing malicious payloads in thumbnails_ffmpeg_args or thumbnails_ffmpeg_ss that execute when any user triggers video thumbnail generation. |
| The MongoDB BI Connector ODBC Driver converts floating point column values into text without checking that the result fits within the destination buffer. When an application reads a sufficiently large floating point value as text, the driver may write beyond the end of that buffer and corrupt adjacent memory. A user who can store data in a collection read through the BI Connector could use this to crash the application performing the read. |
| Improper neutralization of special elements used in an OS command in the task synthesis component in projen before 0.103.0 might allow context-dependent attackers to execute arbitrary commands on a developer workstation or continuous integration runner via shell metacharacters in project configuration values and repository file names that are interpolated into generated task definitions.
To remediate this issue, users should upgrade to version 0.103.0 and then re-synthesize the project so that .projen/tasks.json is regenerated with the corrected task definitions. Upgrading alone is not sufficient because the generated task definition file is committed to the repository. |
| n8n is an open source workflow automation platform. Prior to 2.37.7 and 2.38.2, the OAuth Dynamic Client Registration endpoint bounded redirect_uris but accepted arbitrarily large client_name and grant_types values. An unauthenticated remote caller could repeatedly persist oversized values in oauth_clients and exhaust database storage. The affected validation is in packages/cli/src/modules/oauth-server/oauth-server.service.ts, including MAX_CLIENT_NAME_LENGTH and MAX_GRANT_TYPES. This issue is fixed in versions 2.37.7 and 2.38.2. |
| The nscd service in the GNU C Library 2.3.4 onwards may crash due to a
stack overflow when a malicious DNS server returns too large a response
for a DNS query, resulting in degraded DNS resolution for the system.
Exploitation of this bug needs a system that has nscd enabled and using
an untrusted DNS server for name resolution, with the compromised DNS
server being capable of processing records large enough to result in a
stack overflow in an nscd thread stack. During experimentation, bind 9
was unable to handle large records, but that could change in future or
with a different name server. In typical installations, nscd is
executed in an isolated context as its own user without a shell, due to
which any compromise of that service is isolated.
There is a remote possibility of nscd cache corruption if an attacker
manages to get the stack pointer into a desired point in the heap,
potentially resulting in other caches in nscd being overwritten with
corrupt data through the stack overflow, until the buggy code path
eventually results in a crash.
Finally, a crash in nscd may result in performance degradation when
resolving names, but it does not result in a denial of service. |
