| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: pac1934: check ACPI label duplication
A label duplication failure currently reaches the terminating-byte
write. Release the ACPI result and abort before accessing the missing
label; earlier labels are managed by devres.
Detected by static analysis and reviewed with AI-assisted source auditing. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ade9000: handle Phase C dip events in IRQ1 handler
ADE9000_ST1_CROSSING_DEPTH is the exclusive upper bound for scanning the
STATUS1 event bits, so a value of 25 left out the highest event bit,
ADE9000_ST1_DIPC_BIT (bit 25). Phase C dip events were never reported.
Bump the value to 26 so bit 25 is scanned. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ade9000: fix NULL pointer dereference in clkout registration
ade9000_setup_clkout() passes NULL as the register address when
registering a divider clock. During clock registration, the common
clock framework calls clk_divider_recalc_rate(), which dereferences
the address through readl(). As a result, probing an ADE9000 configured
as a clock provider with an external input clock crashes.
CLKOUT passes CLKIN through without changing its rate. Register it as
a 1:1 fixed-factor clock, which does not require register access.
This change does not affect the configuration using the internal clock,
for which the driver does not register a clock provider. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Fix NULL dereference in tb_remove_work()
There is a slight race between tb_remove_work() and tb_domain_remove()
which leads to dereferencing a NULL tb->root_switch pointer inside
tb_free_unplugged_xdomains():
Thread A Thread B
tb_remove_work()
tb_domain_remove()
mutex_lock(&tb->lock)
tb_stop()
/* doesn't cancel a running callback */
cancel_delayed_work(&tcm->remove_work)
...
tb_switch_remove(tb->root_switch)
tb->root_switch = NULL
mutex_unlock(&tb->lock)
mutex_lock(&tb->lock)
...
/* without checking ->root_switch */
tb_free_unplugged_xdomains(tb->root_switch)
mutex_unlock(&tb->lock)
Commit a8937f35cf39 ("thunderbolt: Remove XDomain from the bus without
holding tb->lock") doesn't seem right to move tb_free_unplugged_xdomains()
out of the &tb->lock section and the check for tb->root_switch, in
particular. It states:
For this reason separate removing the XDomain from the topology data
structures (where we need the lock) from unregistering the device from
the bus (where remove callbacks of the drivers are being called).
tb_free_unplugged_xdomains() belongs to the former group of functions
requiring the lock. And it also calls tb_xdomain_remove() which should
only be called with &tb->lock held.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Don't access a DP tunnel after its DPRX read was canceled
tb_dp_dprx_work() checks ->dprx_canceled before it takes tb->lock so it
misses a tb_dp_dprx_stop() that could not cancel the already running
work. It then polls the DPRX capabilities and runs the callback for a
tunnel that has already been torn down while the domain is suspending or
going away.
This can be hit by cancelling the DPRX read from outside the ordered
tb->wq: During suspend tb_disconnect_and_release_dp() does just this and
with a later patch tb_stop() will do it as well. The latter in combination
with the Apple NHI where the DPRX read never completed is how I hit
this.
Check the flag with tb->lock held instead and check it again in
tb_dp_tunnel_active() because the callback runs after the lock has been
dropped again.
Also clear the flag in tb_dp_dprx_start() so that it only ever describes
the work that is currently in flight. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Tear down inactive DP tunnels when the domain is stopped
tb_stop() only tears down DMA tunnels so a DP tunnel that is still
waiting for dprx_work to complete keeps that work queued while the
routers are removed and the control channel is stopped. The work only
stops once the DPRX timeout has passed and because it requeues itself
until then the flush_workqueue() in tb_domain_remove() won't wait for its
final run. The callback then runs against a domain that is already torn
down. A reference to that domain is kept so the completion waiting for
that domain to disappear in unbind will block until the timeout is
eventually reached.
Tear down DP tunnels that are not active yet as well which also cancels
that work. Tunnels for displays that are already alive are untouched and
keep working. |
| In the Linux kernel, the following vulnerability has been resolved:
module: fix lost error code from codetag_load_module()
If codetag_load_module() fails, err is not set to reflect the failure
and load_module() returns 0 after the module has been torn down.
Also, if the module is a livepatch, mod->klp_info allocated by
copy_module_elf() leaks on this error path. Free it via a new
livepatch_cleanup label. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Update control fields on #VMEXIT if and only if VMRUN succeeded
Leave control.erap_ctl and control.clean as-is in the VMCS if VMRUN fails,
because as per AMD:
there's no explicit architectural guarantee about the behavior in the
presence of VMRUN failures. So the best thing to do would be to assume
that if VMRUN fails, the actions requested in the control fields may not
have been performed. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: fix off-by-four bounds check in tpm2_get_random()
When the response carries the TPM2_ST_SESSIONS tag, tpm2_get_random()
skips the 4-byte parameter size field before locating the random data,
but the bounds check still validates the response length against
TPM_HEADER_SIZE. A truncated response can pass the check and make
memcpy() read up to 4 bytes past the response end, so stale buffer
contents end up in the caller's random bytes.
Fix this by checking the response length against 'offset', which
already includes the skipped parameter size field. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: fix plen overflow in btintel_pcie_recv_frame()
plen is u16 and computed as HDR_SIZE + dlen. For ACL/ISO frames dlen
is a 16-bit field, so a value >= 0xFFFC wraps the sum, bypassing the
"skb->len < plen" check and letting skb_trim() truncate the packet.
Widen plen to u32 so the addition cannot wrap. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: core: fix NULL pointer dereference in serial_core_unregister_port()
port->port_dev is NULL when no port device is installed: it is cleared
on teardown, and never set if registration failed before
serial_core_port_device_add(). serial_core_unregister_port() passes it
straight to serial_core_get_ctrl_dev(), which dereferences it:
KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047]
RIP: serial_core_unregister_port
Call Trace:
serial8250_unregister_port
serial8250_remove
unbind_store
Return early when there is no port device, and read port->port_dev
under port_mutex.
Also clear port->port_dev on the serial_core_register_port() error
path, where the port device has already been removed. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: glink: fix use-after-free of ucsi on remove
The pmic_glink client is released by the devres cleanup, which runs
after pmic_glink_ucsi_remove() has returned, so its notification
callbacks can queue work until then. Work that runs after
ucsi_unregister() has been called touches freed state: it dereferences
the connector array that ucsi_unregister() freed, or registers and
unregisters the instance a second time.
Disable both work items with disable_work_sync() before unregistering,
and unregister only if the instance is still registered.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tipd: fix uninitialized typec_partner_desc in cd321x_update_work()
cd321x_update_work() passes a stack-allocated typec_partner_desc to
typec_register_partner() after initializing only usb_pd, accessory and
identity.
typec_register_partner() copies attach and deattach from the descriptor
into the partner. With those fields left unset, garbage function pointers
may be stored and later invoked from typec_partner_link_device() when a USB
device is linked to the port. Uninitialized pd_revision and usb_capability
similarly leak stack data through partner sysfs.
Zero-initialize the descriptor so optional callbacks remain NULL and the
remaining fields are zero. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix AF_XDP TX timestamp teardown NULL dereference
During XSK TX queue teardown, outstanding descriptors are completed
without a CQE. If one requested a TX timestamp, the completion path
passes that NULL CQE to mlx5e_xsk_fill_timestamp(), which dereferences
it.
Return zero when no CQE is available, indicating that teardown did not
produce a TX timestamp. |
| In the Linux kernel, the following vulnerability has been resolved:
block: reject polled dio with user integrity metadata
IOCB_HAS_METADATA leaves iocb->private as a uio_meta, while
iocb_bio_iopoll() expects a bio. Since 2729a60bbfb9, metadata I/O
always uses __blkdev_direct_IO(), which never publishes the bio for
polling, so IOPOLL calls bio_poll() on the uio_meta.
Reproducer: io_uring IOPOLL plus a PI attribute on an integrity device
(scsi_debug dif=1 dix=1). KASAN reports:
Oops: general protection fault, probably for non-canonical
address 0xdffffc0000000004
KASAN: null-ptr-deref in range
[0x0000000000000020-0x0000000000000027]
RIP: 0010:bio_poll+0x9d/0x4b0
Call Trace:
iocb_bio_iopoll+0x5b/0x80
io_uring_classic_poll+0xf3/0x140
io_do_iopoll+0x4e3/0xc00
io_iopoll_check+0x275/0x560
__do_sys_io_uring_enter+0x2e5/0x720
Return -EOPNOTSUPP when HIPRI is combined with user metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k_htc: bound TX aggregation to MAX_TX_BUF_SIZE
__hif_usb_tx() dequeues up to MAX_TX_AGGR_NUM (20) frames into a
single tx_buf of MAX_TX_BUF_SIZE (32768) bytes, limiting the batch
by record count but never by cumulative byte length.
With large frames (MTU 2304), 20 aggregated frames of 2292 bytes
each exceed the allocation (20 * 2296 = 45920 bytes), so the
memcpy() in the loop writes up to 13152 bytes past tx_buf->buf
before usb_submit_urb().
Peek the queue head and stop before copying any record that would
cross MAX_TX_BUF_SIZE, then dispatch the current batch. Leftover
skbs remain queued and are drained on the next URB completion.
The byte bound changes the loop's exit semantics: it can now exit
before i == tx_skb_cnt - 1. Stock only finalized tx_buf->len on
that last index (len += offset), so an early break would submit a
URB holding only the last record's length while every dequeued skb
is freed on completion, silently dropping frames. Make tx_buf->len
a running total and advance tx_buf->offset per record instead; the
stride round_up(nskb->len + 4, 4) is identical to the stock stride
when the loop runs to completion.
Tested on hardware with an MTU 2304 flood: the loop stops at
record 15 (len = 32144, offset = 32144, within 32768), no
oversized URB is submitted, and MTU 1500 pings pass 20/20. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: drop oversized fragments to avoid extra_len overflow
In ieee80211_rx_h_defragment(), fragment payloads are accumulated into
entry->extra_len as subsequent fragments arrive:
entry->extra_len += rx->skb->len;
When the final fragment arrives, the head fragment is dequeued, and
pskb_expand_head() is called with entry->extra_len to ensure sufficient
tailroom for all queued fragments before copying:
if (skb_tailroom(rx->skb) < entry->extra_len) {
if (unlikely(pskb_expand_head(rx->skb, 0, entry->extra_len,
GFP_ATOMIC))) {
...
}
}
while ((skb = __skb_dequeue(&entry->skb_list))) {
skb_put_data(rx->skb, skb->data, skb->len);
dev_kfree_skb(skb);
}
In commit 69f132236827 ("mac80211: shrink struct
ieee80211_fragment_entry"), entry->extra_len was narrowed from unsigned
int to u16 in order to reduce structure memory footprint.
However, an IEEE 802.11 frame sequence can contain up to 16 fragments
(frag numbers 0..15). If a sequence of large fragments arrives (e.g. from
a malicious peer or rogue AP), the sum of fragment lengths can exceed
65535 bytes (for example, 15 fragments of 4400 bytes total 66000 bytes).
Because extra_len is a u16, this addition overflows and wraps around
modulo 65536 (e.g. 66000 wraps to 464).
Consequently, pskb_expand_head() allocates only the truncated amount of
tailroom (or is skipped entirely if the head fragment already has >= 464
bytes of tailroom). When skb_put_data() subsequently iterates through the
queued skb list, it appends the full payload into the undersized buffer,
causing skb_put() to trigger skb_over_panic() and crash the kernel in
softirq context.
A legitimate MSDU in IEEE 802.11 is at most 2304 bytes (or up to 7935/11454
bytes for A-MSDU, which is not fragmented), well below U16_MAX.
Fix this without increasing the size of struct ieee80211_fragment_entry by
checking whether adding the incoming fragment length would exceed U16_MAX.
If so, purge the queued fragments and drop the frame.
[assign a separate drop reason] |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: core: avoid double-free of OTP NVMEM device
If factory OTP setup fails after the user OTP NVMEM device has been
registered, mtd_otp_nvmem_add() unregisters the user device but leaves
mtd->otp_user_nvmem set. On an error, the caller unregisters it again.
For -EOPNOTSUPP, registration continues and normal teardown unregisters
it again.
Clear mtd->otp_user_nvmem after unregistering it. |
| In the Linux kernel, the following vulnerability has been resolved:
vt: selection: Fix unsigned underflow and slab-out-of-bounds read in paste_selection()
In paste_selection(), the loop copies min_t(unsigned int,
vc_sel.buf_len - pasted,tty->receive_room) bytes per iteration into
tty_ldisc_receive_buf() and increments pasted += count.
Because the selection mutex (vc_sel.lock) is dropped inside the loop
Whenever the line discipline buffer fills up and paste_selection()
sleeps on tty->write_wait, a concurrent TIOCLINUX (TIOCL_SETSEL) ioctl
can replace vc_sel.buffer with a shorter selection and reduce
vc_sel.buf_len below pasted.
When paste_selection() resumes, vc_sel.buf_len - pasted underflows as an
unsigned integer to a large positive value, causing
tty_ldisc_receive_buf(ld, vc_sel.buffer + pasted, NULL, count) to read
up to 4094 bytes out-of-bounds past the newly allocated vc_sel.buffer.
Fix this by terminating the loop when pasted >= vc_sel.buf_len.
Kernel stack trace (Linux 7.3.0-rc3):
==================================================================
BUG: KASAN: slab-out-of-bounds in n_tty_receive_buf_common+0xa01/0x1650
Read of size 4094 at addr ffff888101c58010 by task kworker/u17:1/65
Workqueue: events_unbound flush_to_ldisc
Call Trace:
<TASK>
dump_stack_lvl+0x70/0xa0
print_report+0x153/0x4c6
kasan_report+0xf1/0x120
kasan_check_range+0x11c/0x200
__asan_memcpy+0x29/0x70
n_tty_receive_buf_common+0xa01/0x1650
tty_ldisc_receive_buf+0x66/0x110
tty_port_default_receive_buf+0x6b/0xb0
flush_to_ldisc+0x1b4/0x410
process_one_work+0x6ff/0x1110
worker_thread+0x4a8/0xb70
kthread+0x307/0x3e0
ret_from_fork+0x3ed/0x680
</TASK>
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: Disable TPM on null key name mismatch
The null key name check exists to protect against TPM reset attacks, so
a mismatch should stop the device from serving further requests.
Currently it does not disable the chip when it finds a mismatch.
The mismatch is logged:
tpm tpm0: null key integrity check failed
but the chip keeps serving commands:
/ # tpm2_getcap -c properties-fixed
TPM_PT_FAMILY_INDICATOR:
as UINT32: 0x08322e3000
as string: "2.0"
...
tpm2_load_null() where the null key name check is run sets the chip as
disabled only if the rc is non zero. When the mismatch is seen, rc is
zero at that point and it returns success. The other issue is that the
caller expects the null key handle to be populated when the function
returns 0 which it does here without writing the handle and proceeds
assuming the null key handle is valid.
During the test, I noticed that tpm2_start_auth_session() uses the
uninitialized stack value as the key handle since tpm2_load_null()
returns 0 despite the integrity failure and proceeds with
TPM2_CC_START_AUTH_SESS with this value as salt key handle.
Set rc to -ENODEV on the mismatch. The error path then disables the chip
and returns the correct code to the caller.
Tested in QEMU with swtpm and CONFIG_TCG_TPM2_HMAC=y by making
TPM2_CC_CONTEXT_LOAD fail with TPM2_RC_INTEGRITY and changing the name
of the re-created null key. The chip is now disabled on the mismatch. |
