| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability, which was classified as problematic, was found in nortikin Sverchok 1.3.0. Affected is the function SvSetPropNodeMK2 of the file sverchok/nodes/object_nodes/getsetprop_mk2.py of the component Set Property Mk2 Node. The manipulation leads to improperly controlled modification of object prototype attributes ('prototype pollution'). It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
|
Undisclosed requests can cause the Traffic Management Microkernel (TMM) to terminate. For the Application Visibility and Reporting module, this may occur when the HTTP Analytics profile with URLs enabled under Collected Entities is configured on a virtual server and the DB variables avr.IncludeServerInURI or avr.CollectOnlyHostnameFromURI are enabled. For BIG-IP Advanced WAF and ASM, this may occur when either a DoS or Bot Defense profile is configured on a virtual server and the DB variables avr.IncludeServerInURI or avr.CollectOnlyHostnameFromURI are enabled.
Note: The DB variables avr.IncludeServerInURI and avr.CollectOnlyHostnameFromURI are not enabled by default. For more information about the HTTP Analytics profile and the Collect URLs setting, refer to K30875743: Create a new Analytics profile and attach it to your virtual servers https://my.f5.com/manage/s/article/K30875743 .
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated |
| DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2024-41722. Reason: This candidate is a reservation duplicate of CVE-2024-41722. Notes: All CVE users should reference CVE-2024-41722. instead of this candidate. All references and descriptions in this candidate have been removed to prevent accidental usage. |
| `python-multipart` is a streaming multipart parser for Python. When using form data, `python-multipart` uses a Regular Expression to parse the HTTP `Content-Type` header, including options. An attacker could send a custom-made `Content-Type` option that is very difficult for the RegEx to process, consuming CPU resources and stalling indefinitely (minutes or more) while holding the main event loop. This means that process can't handle any more requests, leading to regular expression denial of service. This vulnerability has been patched in version 0.0.7. |
| Tandoor Recipes is an application for managing recipes, planning meals, and building shopping lists. A Jinja2 SSTI vulnerability allows any user to execute commands on the server. In the case of the provided Docker Compose file as root. This vulnerability is fixed in 1.5.24. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| oc_huff_tree_unpack in huffdec.c in libtheora in Theora through 1.0 7180717 has an invalid negative left shift. NOTE: this is disputed by third parties because there is no evidence of a security impact, e.g., an application would not crash. |
| A vulnerability has been identified in Siveillance Video Mobile Server V2022 R2 (All versions < V22.2a (80)). The mobile server component of affected applications improperly handles the log in for Active Directory accounts that are part of Administrators group. This could allow an unauthenticated remote attacker to access the application without a valid account. |
| Prototype pollution vulnerability in function resolveShims in resolve-shims.js in thlorenz browserify-shim 3.8.15 via the fullPath variable in resolve-shims.js. |
| A vulnerability, which was classified as problematic, has been found in dbartholomae lambda-middleware frameguard up to 1.0.4. Affected by this issue is some unknown functionality of the file packages/json-deserializer/src/JsonDeserializer.ts of the component JSON Mime-Type Handler. The manipulation leads to inefficient regular expression complexity. Upgrading to version 1.1.0 is able to address this issue. The patch is identified as f689404d830cbc1edd6a1018d3334ff5f44dc6a6. It is recommended to upgrade the affected component. VDB-253406 is the identifier assigned to this vulnerability. |
| Prototype pollution vulnerability in function resolveShims in resolve-shims.js in thlorenz browserify-shim 3.8.15 via the shimPath variable in resolve-shims.js. |
| The package shescape from 1.5.10 and before 1.6.1 are vulnerable to Regular Expression Denial of Service (ReDoS) via the escape function in index.js, due to the usage of insecure regex in the escapeArgBash function. |
| In Expat (aka libexpat) before 2.4.3, a left shift by 29 (or more) places in the storeAtts function in xmlparse.c can lead to realloc misbehavior (e.g., allocating too few bytes, or only freeing memory). |
| An issue was discovered in drivers/net/ethernet/intel/igb/igb_main.c in the IGB driver in the Linux kernel before 6.5.3. A buffer size may not be adequate for frames larger than the MTU. |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: pass correct message length to ip6_append_data
l2tp_ip6_sendmsg needs to avoid accounting for the transport header
twice when splicing more data into an already partially-occupied skbuff.
To manage this, we check whether the skbuff contains data using
skb_queue_empty when deciding how much data to append using
ip6_append_data.
However, the code which performed the calculation was incorrect:
ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0;
...due to C operator precedence, this ends up setting ulen to
transhdrlen for messages with a non-zero length, which results in
corrupted packets on the wire.
Add parentheses to correct the calculation in line with the original
intent. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: mt7621: Add sentinel to quirks table
Current driver is missing a sentinel in the struct soc_device_attribute
array, which causes an oops when assessed by the
soc_device_match(mt7621_pcie_quirks_match) call.
This was only exposed once the CONFIG_SOC_MT7621 mt7621 soc_dev_attr
was fixed to register the SOC as a device, in:
commit 7c18b64bba3b ("mips: ralink: mt7621: do not use kzalloc too early")
Fix it by adding the required sentinel. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_elf_fdpic: fix AUXV size calculation when ELF_HWCAP2 is defined
create_elf_fdpic_tables() does not correctly account the space for the
AUX vector when an architecture has ELF_HWCAP2 defined. Prior to the
commit 10e29251be0e ("binfmt_elf_fdpic: fix /proc/<pid>/auxv") it
resulted in the last entry of the AUX vector being set to zero, but with
that change it results in a kernel BUG.
Fix that by adding one to the number of AUXV entries (nitems) when
ELF_HWCAP2 is defined. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv, bpf: Fix out-of-bounds issue when preparing trampoline image
We get the size of the trampoline image during the dry run phase and
allocate memory based on that size. The allocated image will then be
populated with instructions during the real patch phase. But after
commit 26ef208c209a ("bpf: Use arch_bpf_trampoline_size"), the `im`
argument is inconsistent in the dry run and real patch phase. This may
cause emit_imm in RV64 to generate a different number of instructions
when generating the 'im' address, potentially causing out-of-bounds
issues. Let's emit the maximum number of instructions for the "im"
address during dry run to fix this problem. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: mxs-dcp - Ensure payload is zero when using key slot
We could leak stack memory through the payload field when running
AES with a key from one of the hardware's key slots. Fix this by
ensuring the payload field is set to 0 in such cases.
This does not affect the common use case when the key is supplied
from main memory via the descriptor payload. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/dsc: Fix the macro that calculates DSCC_/DSCA_ PPS reg address
Commit bd077259d0a9 ("drm/i915/vdsc: Add function to read any PPS
register") defines a new macro to calculate the DSC PPS register
addresses with PPS number as an input. This macro correctly calculates
the addresses till PPS 11 since the addresses increment by 4. So in that
case the following macro works correctly to give correct register
address:
_MMIO(_DSCA_PPS_0 + (pps) * 4)
However after PPS 11, the register address for PPS 12 increments by 12
because of RC Buffer memory allocation in between. Because of this
discontinuity in the address space, the macro calculates wrong addresses
for PPS 12 - 16 resulting into incorrect DSC PPS parameter value
read/writes causing DSC corruption.
This fixes it by correcting this macro to add the offset of 12 for PPS
>=12.
v3: Add correct paranthesis for pps argument (Jani Nikula)
(cherry picked from commit 6074be620c31dc2ae11af96a1a5ea95580976fb5) |
