Total
306776 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-57890 | 1 Wordpress | 1 Wordpress | 2025-08-23 | 5.9 Medium |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Pierre Lannoy Sessions allows Stored XSS. This issue affects Sessions: from n/a through 3.2.0. | ||||
| CVE-2025-38642 | 1 Linux | 1 Linux Kernel | 2025-08-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix WARN_ON for monitor mode on some devices On devices without WANT_MONITOR_VIF (and probably without channel context support) we get a WARN_ON for changing the per-link setting of a monitor interface. Since we already skip AP_VLAN interfaces and MONITOR with WANT_MONITOR_VIF and/or NO_VIRTUAL_MONITOR should update the settings, catch this in the link change code instead of the warning. | ||||
| CVE-2025-38654 | 1 Linux | 1 Linux Kernel | 2025-08-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: canaan: k230: Fix order of DT parse and pinctrl register Move DT parse before pinctrl register. This ensures that device tree parsing is done before calling devm_pinctrl_register() to prevent using uninitialized pin resources. | ||||
| CVE-2025-38643 | 1 Linux | 1 Linux Kernel | 2025-08-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Add missing lock in cfg80211_check_and_end_cac() Callers of wdev_chandef() must hold the wiphy mutex. But the worker cfg80211_propagate_cac_done_wk() never takes the lock. Which triggers the warning below with the mesh_peer_connected_dfs test from hostapd and not (yet) released mac80211 code changes: WARNING: CPU: 0 PID: 495 at net/wireless/chan.c:1552 wdev_chandef+0x60/0x165 Modules linked in: CPU: 0 UID: 0 PID: 495 Comm: kworker/u4:2 Not tainted 6.14.0-rc5-wt-g03960e6f9d47 #33 13c287eeabfe1efea01c0bcc863723ab082e17cf Workqueue: cfg80211 cfg80211_propagate_cac_done_wk Stack: 00000000 00000001 ffffff00 6093267c 00000000 6002ec30 6d577c50 60037608 00000000 67e8d108 6063717b 00000000 Call Trace: [<6002ec30>] ? _printk+0x0/0x98 [<6003c2b3>] show_stack+0x10e/0x11a [<6002ec30>] ? _printk+0x0/0x98 [<60037608>] dump_stack_lvl+0x71/0xb8 [<6063717b>] ? wdev_chandef+0x60/0x165 [<6003766d>] dump_stack+0x1e/0x20 [<6005d1b7>] __warn+0x101/0x20f [<6005d3a8>] warn_slowpath_fmt+0xe3/0x15d [<600b0c5c>] ? mark_lock.part.0+0x0/0x4ec [<60751191>] ? __this_cpu_preempt_check+0x0/0x16 [<600b11a2>] ? mark_held_locks+0x5a/0x6e [<6005d2c5>] ? warn_slowpath_fmt+0x0/0x15d [<60052e53>] ? unblock_signals+0x3a/0xe7 [<60052f2d>] ? um_set_signals+0x2d/0x43 [<60751191>] ? __this_cpu_preempt_check+0x0/0x16 [<607508b2>] ? lock_is_held_type+0x207/0x21f [<6063717b>] wdev_chandef+0x60/0x165 [<605f89b4>] regulatory_propagate_dfs_state+0x247/0x43f [<60052f00>] ? um_set_signals+0x0/0x43 [<605e6bfd>] cfg80211_propagate_cac_done_wk+0x3a/0x4a [<6007e460>] process_scheduled_works+0x3bc/0x60e [<6007d0ec>] ? move_linked_works+0x4d/0x81 [<6007d120>] ? assign_work+0x0/0xaa [<6007f81f>] worker_thread+0x220/0x2dc [<600786ef>] ? set_pf_worker+0x0/0x57 [<60087c96>] ? to_kthread+0x0/0x43 [<6008ab3c>] kthread+0x2d3/0x2e2 [<6007f5ff>] ? worker_thread+0x0/0x2dc [<6006c05b>] ? calculate_sigpending+0x0/0x56 [<6003b37d>] new_thread_handler+0x4a/0x64 irq event stamp: 614611 hardirqs last enabled at (614621): [<00000000600bc96b>] __up_console_sem+0x82/0xaf hardirqs last disabled at (614630): [<00000000600bc92c>] __up_console_sem+0x43/0xaf softirqs last enabled at (614268): [<00000000606c55c6>] __ieee80211_wake_queue+0x933/0x985 softirqs last disabled at (614266): [<00000000606c52d6>] __ieee80211_wake_queue+0x643/0x985 | ||||
| CVE-2025-38673 | 1 Linux | 1 Linux Kernel | 2025-08-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Revert "drm/gem-framebuffer: Use dma_buf from GEM object instance" This reverts commit cce16fcd7446dcff7480cd9d2b6417075ed81065. The dma_buf field in struct drm_gem_object is not stable over the object instance's lifetime. The field becomes NULL when user space releases the final GEM handle on the buffer object. This resulted in a NULL-pointer deref. Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer: Acquire internal references on GEM handles") only solved the problem partially. They especially don't work for buffer objects without a DRM framebuffer associated. Hence, this revert to going back to using .import_attach->dmabuf. v3: - cc stable | ||||
| CVE-2025-38628 | 1 Linux | 1 Linux Kernel | 2025-08-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: Fix release of uninitialized resources on error path The commit in the fixes tag made sure that mlx5_vdpa_free() is the single entrypoint for removing the vdpa device resources added in mlx5_vdpa_dev_add(), even in the cleanup path of mlx5_vdpa_dev_add(). This means that all functions from mlx5_vdpa_free() should be able to handle uninitialized resources. This was not the case though: mlx5_vdpa_destroy_mr_resources() and mlx5_cmd_cleanup_async_ctx() were not able to do so. This caused the splat below when adding a vdpa device without a MAC address. This patch fixes these remaining issues: - Makes mlx5_vdpa_destroy_mr_resources() return early if called on uninitialized resources. - Moves mlx5_cmd_init_async_ctx() early on during device addition because it can't fail. This means that mlx5_cmd_cleanup_async_ctx() also can't fail. To mirror this, move the call site of mlx5_cmd_cleanup_async_ctx() in mlx5_vdpa_free(). An additional comment was added in mlx5_vdpa_free() to document the expectations of functions called from this context. Splat: mlx5_core 0000:b5:03.2: mlx5_vdpa_dev_add:3950:(pid 2306) warning: No mac address provisioned? ------------[ cut here ]------------ WARNING: CPU: 13 PID: 2306 at kernel/workqueue.c:4207 __flush_work+0x9a/0xb0 [...] Call Trace: <TASK> ? __try_to_del_timer_sync+0x61/0x90 ? __timer_delete_sync+0x2b/0x40 mlx5_vdpa_destroy_mr_resources+0x1c/0x40 [mlx5_vdpa] mlx5_vdpa_free+0x45/0x160 [mlx5_vdpa] vdpa_release_dev+0x1e/0x50 [vdpa] device_release+0x31/0x90 kobject_cleanup+0x37/0x130 mlx5_vdpa_dev_add+0x327/0x890 [mlx5_vdpa] vdpa_nl_cmd_dev_add_set_doit+0x2c1/0x4d0 [vdpa] genl_family_rcv_msg_doit+0xd8/0x130 genl_family_rcv_msg+0x14b/0x220 ? __pfx_vdpa_nl_cmd_dev_add_set_doit+0x10/0x10 [vdpa] genl_rcv_msg+0x47/0xa0 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x53/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x27b/0x3b0 netlink_sendmsg+0x1f7/0x430 __sys_sendto+0x1fa/0x210 ? ___pte_offset_map+0x17/0x160 ? next_uptodate_folio+0x85/0x2b0 ? percpu_counter_add_batch+0x51/0x90 ? filemap_map_pages+0x515/0x660 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x7b/0x2c0 ? do_read_fault+0x108/0x220 ? do_pte_missing+0x14a/0x3e0 ? __handle_mm_fault+0x321/0x730 ? count_memcg_events+0x13f/0x180 ? handle_mm_fault+0x1fb/0x2d0 ? do_user_addr_fault+0x20c/0x700 ? syscall_exit_work+0x104/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f0c25b0feca [...] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2025-51605 | 1 Shopizer | 1 Shopizer | 2025-08-23 | 8.1 High |
| An issue was discovered in Shopizer 3.2.7. The server's CORS implementation reflects the client-supplied Origin header verbatim into Access-Control-Allow-Origin without any whitelist validation, while also enabling Access-Control-Allow-Credentials: true. This allows any malicious origin to make authenticated cross-origin requests and read sensitive responses. | ||||
| CVE-2025-38639 | 1 Linux | 1 Linux Kernel | 2025-08-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_nfacct: don't assume acct name is null-terminated BUG: KASAN: slab-out-of-bounds in .. lib/vsprintf.c:721 Read of size 1 at addr ffff88801eac95c8 by task syz-executor183/5851 [..] string+0x231/0x2b0 lib/vsprintf.c:721 vsnprintf+0x739/0xf00 lib/vsprintf.c:2874 [..] nfacct_mt_checkentry+0xd2/0xe0 net/netfilter/xt_nfacct.c:41 xt_check_match+0x3d1/0xab0 net/netfilter/x_tables.c:523 nfnl_acct_find_get() handles non-null input, but the error printk relied on its presence. | ||||
| CVE-2025-38632 | 1 Linux | 1 Linux Kernel | 2025-08-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinmux: fix race causing mux_owner NULL with active mux_usecount commit 5a3e85c3c397 ("pinmux: Use sequential access to access desc->pinmux data") tried to address the issue when two client of the same gpio calls pinctrl_select_state() for the same functionality, was resulting in NULL pointer issue while accessing desc->mux_owner. However, issue was not completely fixed due to the way it was handled and it can still result in the same NULL pointer. The issue occurs due to the following interleaving: cpu0 (process A) cpu1 (process B) pin_request() { pin_free() { mutex_lock() desc->mux_usecount--; //becomes 0 .. mutex_unlock() mutex_lock(desc->mux) desc->mux_usecount++; // becomes 1 desc->mux_owner = owner; mutex_unlock(desc->mux) mutex_lock(desc->mux) desc->mux_owner = NULL; mutex_unlock(desc->mux) This sequence leads to a state where the pin appears to be in use (`mux_usecount == 1`) but has no owner (`mux_owner == NULL`), which can cause NULL pointer on next pin_request on the same pin. Ensure that updates to mux_usecount and mux_owner are performed atomically under the same lock. Only clear mux_owner when mux_usecount reaches zero and no new owner has been assigned. | ||||
| CVE-2025-38620 | 1 Linux | 1 Linux Kernel | 2025-08-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: zloop: fix KASAN use-after-free of tag set When a zoned loop device, or zloop device, is removed, KASAN enabled kernel reports "BUG KASAN use-after-free" in blk_mq_free_tag_set(). The BUG happens because zloop_ctl_remove() calls put_disk(), which invokes zloop_free_disk(). The zloop_free_disk() frees the memory allocated for the zlo pointer. However, after the memory is freed, zloop_ctl_remove() calls blk_mq_free_tag_set(&zlo->tag_set), which accesses the freed zlo. Hence the KASAN use-after-free. zloop_ctl_remove() put_disk(zlo->disk) put_device() kobject_put() ... zloop_free_disk() kvfree(zlo) blk_mq_free_tag_set(&zlo->tag_set) To avoid the BUG, move the call to blk_mq_free_tag_set(&zlo->tag_set) from zloop_ctl_remove() into zloop_free_disk(). This ensures that the tag_set is freed before the call to kvfree(zlo). | ||||
| CVE-2025-57888 | 2 Nootheme, Wordpress | 2 Jobmonster, Wordpress | 2025-08-23 | 5.3 Medium |
| Exposure of Sensitive System Information to an Unauthorized Control Sphere vulnerability in NooTheme Jobmonster allows Retrieve Embedded Sensitive Data. This issue affects Jobmonster: from n/a through 4.8.0. | ||||
| CVE-2025-51825 | 1 Jeecg | 1 Jeecgboot | 2025-08-23 | 6.5 Medium |
| JeecgBoot versions from 3.4.3 up to 3.8.0 were found to contain a SQL injection vulnerability in the /jeecg-boot/online/cgreport/head/parseSql endpoint, which allows bypassing SQL blacklist restrictions. | ||||
| CVE-2025-38665 | 1 Linux | 1 Linux Kernel | 2025-08-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode Andrei Lalaev reported a NULL pointer deref when a CAN device is restarted from Bus Off and the driver does not implement the struct can_priv::do_set_mode callback. There are 2 code path that call struct can_priv::do_set_mode: - directly by a manual restart from the user space, via can_changelink() - delayed automatic restart after bus off (deactivated by default) To prevent the NULL pointer deference, refuse a manual restart or configure the automatic restart delay in can_changelink() and report the error via extack to user space. As an additional safety measure let can_restart() return an error if can_priv::do_set_mode is not set instead of dereferencing it unchecked. | ||||
| CVE-2025-43751 | 1 Liferay | 2 Dxp, Portal | 2025-08-23 | N/A |
| User enumeration vulnerability in Liferay Portal 7.4.0 through 7.4.3.132, and Liferay DXP 2024.Q4.0 through 2024.Q4.7, 2024.Q3.0 through 2024.Q3.13, 2024.Q2.0 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.14, 2023.Q4.0 through 2023.Q4.10, 2023.Q3.1 through 2023.Q3.10 and 7.4 GA through update 92 allows remote attackers to determine if an account exist in the application via the create account page. | ||||
| CVE-2025-55605 | 1 Tenda | 1 Ax3 | 2025-08-23 | N/A |
| Tenda AX3 V16.03.12.10_CN is vulnerable to Buffer Overflow in the saveParentControlInfo function via the deviceName parameter. | ||||
| CVE-2025-38669 | 1 Linux | 1 Linux Kernel | 2025-08-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Revert "drm/gem-shmem: Use dma_buf from GEM object instance" This reverts commit 1a148af06000e545e714fe3210af3d77ff903c11. The dma_buf field in struct drm_gem_object is not stable over the object instance's lifetime. The field becomes NULL when user space releases the final GEM handle on the buffer object. This resulted in a NULL-pointer deref. Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer: Acquire internal references on GEM handles") only solved the problem partially. They especially don't work for buffer objects without a DRM framebuffer associated. Hence, this revert to going back to using .import_attach->dmabuf. v3: - cc stable | ||||
| CVE-2025-38670 | 1 Linux | 1 Linux Kernel | 2025-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64/entry: Mask DAIF in cpu_switch_to(), call_on_irq_stack() `cpu_switch_to()` and `call_on_irq_stack()` manipulate SP to change to different stacks along with the Shadow Call Stack if it is enabled. Those two stack changes cannot be done atomically and both functions can be interrupted by SErrors or Debug Exceptions which, though unlikely, is very much broken : if interrupted, we can end up with mismatched stacks and Shadow Call Stack leading to clobbered stacks. In `cpu_switch_to()`, it can happen when SP_EL0 points to the new task, but x18 stills points to the old task's SCS. When the interrupt handler tries to save the task's SCS pointer, it will save the old task SCS pointer (x18) into the new task struct (pointed to by SP_EL0), clobbering it. In `call_on_irq_stack()`, it can happen when switching from the task stack to the IRQ stack and when switching back. In both cases, we can be interrupted when the SCS pointer points to the IRQ SCS, but SP points to the task stack. The nested interrupt handler pushes its return addresses on the IRQ SCS. It then detects that SP points to the task stack, calls `call_on_irq_stack()` and clobbers the task SCS pointer with the IRQ SCS pointer, which it will also use ! This leads to tasks returning to addresses on the wrong SCS, or even on the IRQ SCS, triggering kernel panics via CONFIG_VMAP_STACK or FPAC if enabled. This is possible on a default config, but unlikely. However, when enabling CONFIG_ARM64_PSEUDO_NMI, DAIF is unmasked and instead the GIC is responsible for filtering what interrupts the CPU should receive based on priority. Given the goal of emulating NMIs, pseudo-NMIs can be received by the CPU even in `cpu_switch_to()` and `call_on_irq_stack()`, possibly *very* frequently depending on the system configuration and workload, leading to unpredictable kernel panics. Completely mask DAIF in `cpu_switch_to()` and restore it when returning. Do the same in `call_on_irq_stack()`, but restore and mask around the branch. Mask DAIF even if CONFIG_SHADOW_CALL_STACK is not enabled for consistency of behaviour between all configurations. Introduce and use an assembly macro for saving and masking DAIF, as the existing one saves but only masks IF. | ||||
| CVE-2025-38616 | 1 Linux | 1 Linux Kernel | 2025-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tls: handle data disappearing from under the TLS ULP TLS expects that it owns the receive queue of the TCP socket. This cannot be guaranteed in case the reader of the TCP socket entered before the TLS ULP was installed, or uses some non-standard read API (eg. zerocopy ones). Replace the WARN_ON() and a buggy early exit (which leaves anchor pointing to a freed skb) with real error handling. Wipe the parsing state and tell the reader to retry. We already reload the anchor every time we (re)acquire the socket lock, so the only condition we need to avoid is an out of bounds read (not having enough bytes in the socket for previously parsed record len). If some data was read from under TLS but there's enough in the queue we'll reload and decrypt what is most likely not a valid TLS record. Leading to some undefined behavior from TLS perspective (corrupting a stream? missing an alert? missing an attack?) but no kernel crash should take place. | ||||
| CVE-2025-38645 | 1 Linux | 1 Linux Kernel | 2025-08-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Check device memory pointer before usage Add a NULL check before accessing device memory to prevent a crash if dev->dm allocation in mlx5_init_once() fails. | ||||
| CVE-2025-38661 | 1 Linux | 1 Linux Kernel | 2025-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: alienware-wmi-wmax: Fix `dmi_system_id` array Add missing empty member to `awcc_dmi_table`. | ||||