| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A heap buffer overflow vulnerability exists in the DTLS handshake fragment reassembly logic of GnuTLS. The issue arises in merge_handshake_packet() where incoming handshake fragments are matched and merged based solely on handshake type, without validating that the message_length field remains consistent across all fragments of the same logical message. An attacker can exploit this by sending crafted DTLS fragments with conflicting message_length values, causing the implementation to allocate a buffer based on a smaller initial fragment and subsequently write beyond its bounds using larger, inconsistent fragments. Because the merge operation does not enforce proper bounds checking against the allocated buffer size, this results in an out-of-bounds write on the heap. The vulnerability is remotely exploitable without authentication via the DTLS handshake path and can lead to application crashes or potential memory corruption. |
| A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service. |
| Crypt::ScryptKDF versions through 0.010 for Perl uses insecure random number source when no CSPRNG module is available.
The random_bytes function fell back to using the built-in rand() function when none of the Perl modules Crypt::PRNG, Crypt::OpenSSL::Random, Net::SSLeay, Crypt::Random, or Bytes::Random::Secure were available. |
| A race condition was addressed with additional validation. This issue is fixed in macOS Sequoia 15.7, macOS Tahoe 26. An app may be able to gain root privileges. |
| A server-side request forgery (SSRF) vulnerability was identified in GitHub Enterprise Server that allowed an unauthenticated attacker to send crafted requests to internal services by exploiting insufficient input validation in an upload endpoint. By injecting path traversal content into request parameters, an attacker could bypass the intended request flow and redirect internal API calls, potentially accessing internal services and exposing sensitive credentials. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.22 and was fixed in versions 3.16.20, 3.17.17, 3.18.11, 3.19.8, 3.20.4, and 3.21.1. This vulnerability was reported via the GitHub Bug Bounty program. |
| In OpenStack Swift before 2.36.2 and 2.37.2, s3api middleware enters an infinite loop when processing a truncated aws-chunked PUT request body. The StreamingInput class repeatedly appends an empty buffer and re-reads, causing the proxy-server worker handling the request to become permanently unresponsive with increasing CPU and memory consumption. An authenticated attacker can systematically exhaust all proxy-server workers, resulting in denial of service. The defect was introduced in Swift 2.36.0. |
| A Server-Side Request Forgery (SSRF) vulnerability was identified in GitHub Enterprise Server that allowed an attacker to cause the server to issue HTTP requests to internal services via the security advisories package lookup feature. By directing requests to an internal management service and measuring response timing, an attacker could infer the values of sensitive environment variables, including signing secrets and private keys. Exploitation required GitHub Packages to be enabled; on instances not running in private mode the vulnerability was exploitable without authentication, otherwise any authenticated user could exploit it. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.21.1 and was fixed in versions 3.20.3, 3.19.7, 3.18.10, 3.17.16, and 3.16.19. This vulnerability was reported via the GitHub Bug Bounty program. |
| A flaw has been found in UTT HiPER 1250GW up to 3.2.7-210907-180535. Affected by this issue is the function strcpy of the file /goform/formGroupConfig of the component Web Management Interface. Executing a manipulation of the argument Profile can lead to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been published and may be used. |
| The Style Kits – Advanced Theme Styles for Elementor, Elementor Kits & Elementor Patterns plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the '/wp-json/agwp/v1/tokens/save' endpoint kit title parameter in versions up to, and including, 2.5.0 due to insufficient input sanitization and output escaping in an admin attribute context. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| A vulnerability was detected in UTT HiPER 1250GW up to 3.2.7-210907-180535. Affected by this vulnerability is the function strcpy of the file /goform/formConfigFastDirectionW of the component Web Management Interface. Performing a manipulation of the argument Profile results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit is now public and may be used. |
| A weakness has been identified in UTT HiPER 1200GW up to 2.5.3-170306. Affected is an unknown function of the file /goform/formPptpClientConfig of the component Web Management Interface. This manipulation of the argument PPTP server address/username/password/tunnel name causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. |
| FastNetMon Community Edition through 1.2.9 contains an out-of-bounds read vulnerability in the NetFlow v9 data flowset processor. In src/netflow_plugin/netflow_v9_collector.cpp, the Data template branch (lines 1695-1702) iterates over flow records without performing a per-iteration bounds check against the packet end pointer. In contrast, the Options template branch (lines 1709-1719) correctly checks 'if (pkt + offset + field_template->total_length > packet_end)' before each iteration. The Data branch omits this check entirely. Since template definitions are sent by the network peer (and are unauthenticated UDP), an attacker can craft templates that cause the parser to read arbitrary memory past the packet buffer. This can leak sensitive memory contents or cause a crash. |
| FastNetMon Community Edition through 1.2.9 exposes a gRPC API server on port 50052 with no authentication mechanism. The server is initialized with grpc::InsecureServerCredentials() (src/fastnetmon.cpp line 477) and a source code comment explicitly acknowledges 'Listen on the given address without any authentication mechanism.' None of the RPC methods in src/api.cpp (ExecuteBan, ExecuteUnBan, GetBanlist, GetTotalTrafficCounters, etc.) perform any credential verification. The ExecuteBan and ExecuteUnBan methods trigger security-critical actions: BGP route announcements that can blackhole network traffic, and execution of external notification scripts via popen(). An attacker with local network access can ban arbitrary IP addresses (causing denial of service to legitimate traffic), unban active attacks (disabling DDoS mitigation), and trigger script execution. There is also no role-based access control separating read-only monitoring from destructive administrative operations. |
| FastNetMon Community Edition through 1.2.9 contains an integer overflow vulnerability in the packet capture buffer allocation. In src/packet_storage.hpp, the allocate_buffer() function computes memory_size_in_bytes as 'buffer_size_in_packets * (max_captured_packet_size + sizeof(fastnetmon_pcap_pkthdr_t)) + sizeof(fastnetmon_pcap_file_header_t)' using unsigned int (32-bit) arithmetic. With max_captured_packet_size=1500 and sizeof(fastnetmon_pcap_pkthdr_t)=16, each packet requires approximately 1516 bytes. If buffer_size_in_packets exceeds approximately 2,832,542, the multiplication overflows, resulting in a much smaller allocation than expected. Subsequent write_packet() calls then write past the allocated buffer, causing heap corruption. The buffer_size_in_packets value is derived from the ban_details_records_count configuration parameter, which is parsed using atoi() with no overflow checking. |
| A security flaw has been discovered in UTT HiPER 1200GW up to 2.5.3-170306. This impacts the function strcpy of the file /goform/setSysAdm of the component Web Management Interface. The manipulation of the argument sysAdmUser/sysAdmPass results in buffer overflow. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. |
| FastNetMon Community Edition through 1.2.9 contains multiple out-of-bounds reads in the BGP MP_REACH_NLRI IPv6 attribute decoder. The function decode_mp_reach_ipv6() in src/bgp_protocol.cpp contains a TODO comment at line 156 explicitly acknowledging 'we should add sanity checks to avoid reads after attribute memory block.' The function casts raw pointers to structure types without verifying sufficient data exists (line 158), uses the attacker-controlled length_of_next_hop field to determine memcpy size (line 181), and computes prefix_length by dereferencing a pointer calculated from multiple attacker-controlled offsets without bounds validation (line 189). The prefix_length is then used to calculate number_of_bytes_required_for_prefix which becomes a memcpy length (line 202) with no check against remaining buffer size. |
| FastNetMon Community Edition through 1.2.9 is vulnerable to a local symlink attack via predictable file paths in /tmp. The statistics file path defaults to '/tmp/fastnetmon.dat' (src/fastnetmon.cpp line 159). The print_screen_contents_into_file() function (src/fastnetmon_logic.cpp line 2186) opens this path with std::ios::trunc without checking for symlinks or using O_NOFOLLOW. Additionally, the chmod() call on line 2190 always operates on cli_stats_file_path regardless of which file_path parameter was passed (a bug that applies wrong permissions), and the umask is set to 0 during daemonization (src/fastnetmon.cpp line 1821), making all created files world-writable. A local attacker can exploit this to overwrite arbitrary files as the FastNetMon process user (typically root). |
| LangChain is a framework for building agents and LLM-powered applications. Prior to 0.3.85 and 1.3.3, LangChain contains older runtime code paths that deserialize run inputs, run outputs, or other application-controlled payloads using overly broad object allowlists. These paths may call load() with allowed_objects="all". This does not enable arbitrary Python object deserialization, but it does allow any trusted LangChain-serializable object to be revived, which is broader than these runtime paths require. As a result, attacker-supplied LangChain serialized constructor dictionaries may cause trusted runtime paths to instantiate classes with untrusted constructor arguments. This vulnerability is fixed in 0.3.85 and 1.3.3. |
| A vulnerability was identified in QianFox FoxCMS up to 1.2.6. This affects the function Edit of the file Admin.php. The manipulation leads to weak password recovery. The attack can be initiated remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| The Drag and Drop Multiple File Upload for Contact Form 7 plugin for WordPress is vulnerable to arbitrary file upload in versions up to, and including, 1.3.9.7. This is due to insufficient file type validation that occurs when custom blacklist types are configured, which replaces the default dangerous extension denylist instead of merging with it, and the wpcf7_antiscript_file_name() sanitization function being bypassed for filenames containing non-ASCII characters. This makes it possible for unauthenticated attackers to upload arbitrary files, such as PHP files, to the server, which can be leveraged to achieve remote code execution. The vulnerability was originally reported by Leonid Semenenko (lsemenenko) and partially patched in version 1.3.9.7. A bypass for the patch was separately discovered and reported by Nguyen Hung (Mitchell). |
