| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the Juniper DHCP service (jdhcpd) of Juniper Networks Junos OS and Junos OS Evolved allows a DHCP client in one subnet to exhaust the address pools of other subnets, leading to a Denial of Service (DoS) on the downstream DHCP server.
By default, the DHCP relay agent inserts its own Option 82 information when forwarding client requests, optionally replacing any Option 82 information provided by the client. When a specific DHCP DISCOVER is received in 'forward-only' mode with Option 82, the device should drop the message unless 'trust-option82' is configured. Instead, the DHCP relay forwards these packets to the DHCP server unmodified, which uses up addresses in the DHCP server's address pool, ultimately leading to address pool exhaustion.
This issue affects Junos OS:
* all versions before 21.2R3-S10,
* from 21.4 before 21.4R3-S12,
* all versions of 22.2,
* from 22.4 before 22.4R3-S8,
* from 23.2 before 23.2R2-S5,
* from 23.4 before 23.4R2-S6,
* from 24.2 before 24.2R2-S2,
* from 24.4 before 24.4R2,
* from 25.2 before 25.2R1-S1, 25.2R2.
Junos OS Evolved:
* all versions before 21.4R3-S12-EVO,
* all versions of 22.2-EVO,
* from 22.4 before 22.4R3-S8-EVO,
* from 23.2 before 23.2R2-S5-EVO,
* from 23.4 before 23.4R2-S6-EVO,
* from 24.2 before 24.2R2-S2-EVO,
* from 24.4 before 24.4R2-EVO,
* from 25.2 before 25.2R1-S1-EVO, 25.2R2-EVO. |
| Calling getnetbyaddr or getnetbyaddr_r with a configured nsswitch.conf that specifies the library's DNS backend for networks and queries for a zero-valued network in the GNU C Library version 2.0 to version 2.42 can leak stack contents to the configured DNS resolver. |
| A Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in the SIP application layer gateway (ALG) of Juniper Networks Junos OS on SRX Series and MX Series with MX-SPC3 or MS-MPC allows an unauthenticated network-based attacker sending specific SIP messages over TCP to crash the flow management process, leading to a Denial of Service (DoS).
On SRX Series, and MX Series with MX-SPC3 or MS-MPC service cards, receipt of multiple SIP messages causes the SIP headers to be parsed incorrectly, eventually causing a continuous loop and leading to a watchdog timer expiration, crashing the flowd process on SRX Series and MX Series with MX-SPC3, or mspmand process on MX Series with MS-MPC.
This issue only occurs over TCP. SIP messages sent over UDP cannot trigger this issue.
This issue affects Junos OS on SRX Series and MX Series with MX-SPC3 and MS-MPC:
* all versions before 21.2R3-S10,
* from 21.4 before 21.4R3-S12,
* from 22.4 before 22.4R3-S8,
* from 23.2 before 23.2R2-S5,
* from 23.4 before 23.4R2-S6,
* from 24.2 before 24.2R2-S3,
* from 24.4 before 24.4R2-S1,
* from 25.2 before 25.2R1-S1, 25.2R2. |
| A Buffer Over-read vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
When an affected device receives a BGP update with a set of specific optional transitive attributes over an established peering session, rpd will crash and restart when attempting to advertise the received information to another peer.
This issue can only happen if one or both of the BGP peers of the receiving session are non-4-byte-AS capable as determined from the advertised capabilities during BGP session establishment. Junos OS and Junos OS Evolved default behavior is 4-byte-AS capable unless this has been specifically disabled by configuring:
[ protocols bgp ... disable-4byte-as ]
Established BGP sessions can be checked by executing:
show bgp neighbor <IP address> | match "4 byte AS"
This issue affects:
Junos OS:
* all versions before 22.4R3-S8,
* 23.2 versions before 23.2R2-S5,
* 23.4 versions before 23.4R2-S6,
* 24.2 versions before 24.2R2-S2,
* 24.4 versions before 24.4R2;
Junos OS Evolved:
* all versions before 22.4R3-S8-EVO,
* 23.2 versions before 23.2R2-S5-EVO,
* 23.4 versions before 23.4R2-S6-EVO,
* 24.2 versions before 24.2R2-S2-EVO,
* 24.4 versions before 24.4R2-EVO. |
| Docmost is an open-source collaborative wiki and documentation software. From 0.21.0 to before 0.24.0, Docmost is vulnerable to Arbitrary File Write via Zip Import Feature (ZipSlip). In apps/server/src/integrations/import/utils/file.utils.ts, there are no validation on filename. This vulnerability is fixed in 0.24.0. |
| An Improper Locking vulnerability in the GTP plugin of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (Dos).
If an SRX Series device receives a specifically malformed GPRS Tunnelling Protocol (GTP) Modify Bearer Request message, a lock is acquired and never released. This results in other threads not being able to acquire a lock themselves, causing a watchdog timeout leading to FPC crash and restart. This issue leads to a complete traffic outage until the device has automatically recovered.
This issue affects Junos OS on SRX Series:
* all versions before 22.4R3-S8,
* 23.2 versions before 23.2R2-S5,
* 23.4 versions before 23.4R2-S6,
* 24.2 versions before 24.2R2-S3,
* 24.4 versions before 24.4R2-S2,
* 25.2 versions before 25.2R1-S1, 25.2R2. |
| An Incorrect Calculation vulnerability in the Layer 2 Control
Protocol
Daemon (l2cpd) of Juniper Networks Junos OS Evolved allows an unauthenticated network-adjacent attacker flapping the management interface to cause the learning of new MACs over label-switched interfaces (LSI) to stop while generating a flood of logs, resulting in high CPU usage.
When the issue is seen, the following log message will be generated:
op:1 flag:0x6 mac:xx:xx:xx:xx:xx:xx bd:2 ifl:13302 reason:0(REASON_NONE) i-op:6(INTRNL_OP_HW_FORCE_DELETE) status:10 lstatus:10 err:26(GETIFBD_VALIDATE_FAILED) err-reason 4(IFBD_VALIDATE_FAIL_EPOCH_MISMATCH) hw_wr:0x4 ctxsync:0 fwdsync:0 rtt-id:51 p_ifl:0 fwd_nh:0 svlbnh:0 event:- smask:0x100000000 dmask:0x0 mplsmask 0x1 act:0x5800 extf:0x0 pfe-id 0 hw-notif-ifl 13302 programmed-ifl 4294967295 pseudo-vtep underlay-ifl-idx 0 stack:GET_MAC, ALLOCATE_MAC, GET_IFL, GET_IFF, GET_IFBD, STOP,
This issue affects Junos OS Evolved:
* all versions before 21.4R3-S7-EVO,
* from 22.2 before 22.2R3-S4-EVO,
* from 22.3 before 22.3R3-S3-EVO,
* from 22.4 before 22.4R3-S2-EVO,
* from 23.2 before 23.2R2-S1-EVO,
* from 23.4 before 23.4R1-S2-EVO, 23.4R2-EVO. |
| CWE-416: Use After Free vulnerability that could cause remote code execution when the end user imports the malicious project file (SSD file) into Rapsody. |
| An Improper Handling of Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated network-based attacker sending a specific ICMP packet through a GRE tunnel to cause the PFE to crash and restart.
When PowerMode IPsec (PMI) and GRE performance acceleration are enabled and the device receives a specific ICMP packet, a crash occurs in the SRX PFE, resulting in traffic loss. PMI is enabled by default, and GRE performance acceleration can be enabled by running the configuration command shown below. PMI is a mode of operation that provides IPsec performance improvements using Vector Packet Processing.
Note that PMI with GRE performance acceleration is only supported on specific SRX platforms.
This issue affects Junos OS on the SRX Series:
* all versions before 21.4R3-S12,
* from 22.4 before 22.4R3-S8,
* from 23.2 before 23.2R2-S5,
* from 23.4 before 23.4R2-S5,
* from 24.2 before 24.2R2-S3,
* from 24.4 before 24.4R2-S1,
* from 25.2 before 25.2R1-S1, 25.2R2. |
| In key-based pairing, there is a possible ID due to a logic error in the code. This could lead to remote (proximal/adjacent) information disclosure of user's conversations and location with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Arcane provides modern docker management. Prior to 1.13.0, Arcane has a command injection in the updater service. Arcane’s updater service supported lifecycle labels com.getarcaneapp.arcane.lifecycle.pre-update and com.getarcaneapp.arcane.lifecycle.post-update that allowed defining a command to run before or after a container update. The label value is passed directly to /bin/sh -c without sanitization or validation. Because any authenticated user (not limited to administrators) can create projects through the API, an attacker can create a project that specifies one of these lifecycle labels with a malicious command. When an administrator later triggers a container update (either manually or via scheduled update checks), Arcane reads the lifecycle label and executes its value as a shell command inside the container. This vulnerability is fixed in 1.13.0. |
| H3 is a minimal H(TTP) framework built for high performance and portability. Prior to 1.15.5, there is a critical HTTP Request Smuggling vulnerability. readRawBody is doing a strict case-sensitive check for the Transfer-Encoding header. It explicitly looks for "chunked", but per the RFC, this header should be case-insensitive. This vulnerability is fixed in 1.15.5. |
| A clickjacking vulnerability exists in the web portal of Juniper Networks Paragon Automation (Pathfinder, Planner, Insights) due to the application's failure to set appropriate X-Frame-Options and X-Content-Type HTTP headers. This vulnerability allows an attacker to trick users into interacting with the interface under the attacker's control.
This issue affects all versions of Paragon Automation (Pathfinder, Planner, Insights) before 24.1.1. |
| Svelte devalue is a JavaScript library that serializes values into strings when JSON.stringify isn't sufficient for the job. From 5.3.0 to 5.6.1, certain inputs can cause devalue.parse to consume excessive CPU time and/or memory, potentially leading to denial of service in systems that parse input from untrusted sources. This affects applications using devalue.parse on externally-supplied data. The root cause is the typed array hydration expecting an ArrayBuffer as input, but not checking the assumption before creating the typed array. This vulnerability is fixed in 5.6.2. |
| Changjetong T+ versions up to and including 16.x contain a .NET deserialization vulnerability in an AjaxPro endpoint that can lead to remote code execution. A remote attacker can send a crafted request to /tplus/ajaxpro/Ufida.T.CodeBehind._PriorityLevel,App_Code.ashx?method=GetStoreWarehouseByStore with a malicious JSON body that leverages deserialization of attacker-controlled .NET types to invoke arbitrary methods such as System.Diagnostics.Process.Start. This can result in execution of arbitrary commands in the context of the T+ application service account. Exploitation evidence was observed by the Shadowserver Foundation on 2023-08-19 (UTC). |
| An Incorrect Permission Assignment for Critical Resource vulnerability in the Juniper DHCP daemon (jdhcpd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privileged user to write to the Unix socket used to manage the jdhcpd process, resulting in complete control over the resource.
This vulnerability allows any low-privileged user logged into the system to connect to the Unix socket and issue commands to manage the DHCP service, in essence, taking administrative control of the local DHCP server or DHCP relay.
This issue affects:
Junos OS:
* all versions before 21.2R3-S10,
* all versions of 22.2,
* from 21.4 before 21.4R3-S12,
* from 22.4 before 22.4R3-S8,
* from 23.2 before 23.2R2-S5,
* from 23.4 before 23.4R2-S6,
* from 24.2 before 24.2R2-S2,
* from 24.4 before 24.4R2,
* from 25.2 before 25.2R1-S1, 25.2R2;
Junos OS Evolved:
* all versions before 22.4R3-S8-EVO,
* from 23.2 before 23.2R2-S5-EVO,
* from 23.4 before 23.4R2-S6-EVO,
* from 24.2 before 24.2R2-S2-EVO,
* from 24.4 before 24.4R2-EVO,
* from 25.2 before 25.2R1-S1-EVO, 25.2R2-EVO. |
| An Improper Validation of Syntactic Correctness of Input vulnerability in the Web-Filtering module of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
If an SRX device configured for UTM Web-Filtering receives a specifically malformed SSL packet, this will cause an FPC crash and restart.
This issue affects Junos OS on SRX Series:
* 23.2 versions from 23.2R2-S2 before 23.2R2-S5,
* 23.4 versions from 23.4R2-S1 before 23.4R2-S5,
* 24.2 versions before 24.2R2-S2,
* 24.4 versions before 24.4R1-S3, 24.4R2.
Earlier versions of Junos are also affected, but no fix is available. |
| SvelteKit is a framework for rapidly developing robust, performant web applications using Svelte. Prior to 2.49.5, SvelteKit is vulnerable to a server side request forgery (SSRF) and denial of service (DoS) under certain conditions. From 2.44.0 through 2.49.4, the vulnerability results in a DoS when your app has at least one prerendered route (export const prerender = true). From 2.19.0 through 2.49.4, the vulnerability results in a DoS when your app has at least one prerendered route and you are using adapter-node without a configured ORIGIN environment variable, and you are not using a reverse proxy that implements Host header validation. This vulnerability is fixed in 2.49.5. |
| Uploadify WordPress plugin versions up to and including 1.0 contain an arbitrary file upload vulnerability in process_upload.php due to missing file type validation. An unauthenticated remote attacker can upload arbitrary files to the affected WordPress site, which may allow remote code execution by uploading executable content to a web-accessible location. |
| A Null Pointer Dereference vulnerability exists in the referer header check of the web portal of TP-Link TL-WR841N v14, caused by improper input validation. A remote, unauthenticated attacker can exploit this flaw and cause Denial of Service on the web portal service.This issue affects TL-WR841N v14: before 250908. |
