| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: aqc111: Do not perform PM inside suspend callback
syzbot reports "task hung in rpm_resume"
This is caused by aqc111_suspend calling
the PM variant of its write_cmd routine.
The simplified call trace looks like this:
rpm_suspend()
usb_suspend_both() - here udev->dev.power.runtime_status == RPM_SUSPENDING
aqc111_suspend() - called for the usb device interface
aqc111_write32_cmd()
usb_autopm_get_interface()
pm_runtime_resume_and_get()
rpm_resume() - here we call rpm_resume() on our parent
rpm_resume() - Here we wait for a status change that will never happen.
At this point we block another task which holds
rtnl_lock and locks up the whole networking stack.
Fix this by replacing the write_cmd calls with their _nopm variants |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: guard flow control update with global_tx_fc in buffer switching
mvpp2_bm_switch_buffers() unconditionally calls
mvpp2_bm_pool_update_priv_fc() when switching between per-cpu and
shared buffer pool modes. This function programs CM3 flow control
registers via mvpp2_cm3_read()/mvpp2_cm3_write(), which dereference
priv->cm3_base without any NULL check.
When the CM3 SRAM resource is not present in the device tree (the
third reg entry added by commit 60523583b07c ("dts: marvell: add CM3
SRAM memory to cp11x ethernet device tree")), priv->cm3_base remains
NULL and priv->global_tx_fc is false. Any operation that triggers
mvpp2_bm_switch_buffers(), for example an MTU change that crosses
the jumbo frame threshold, will crash:
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000096000006
EC = 0x25: DABT (current EL), IL = 32 bits
pc : readl+0x0/0x18
lr : mvpp2_cm3_read.isra.0+0x14/0x20
Call trace:
readl+0x0/0x18
mvpp2_bm_pool_update_fc+0x40/0x12c
mvpp2_bm_pool_update_priv_fc+0x94/0xd8
mvpp2_bm_switch_buffers.isra.0+0x80/0x1c0
mvpp2_change_mtu+0x140/0x380
__dev_set_mtu+0x1c/0x38
dev_set_mtu_ext+0x78/0x118
dev_set_mtu+0x48/0xa8
dev_ifsioc+0x21c/0x43c
dev_ioctl+0x2d8/0x42c
sock_ioctl+0x314/0x378
Every other flow control call site in the driver already guards
hardware access with either priv->global_tx_fc or port->tx_fc.
mvpp2_bm_switch_buffers() is the only place that omits this check.
Add the missing priv->global_tx_fc guard to both the disable and
re-enable calls in mvpp2_bm_switch_buffers(), consistent with the
rest of the driver. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: Fix interrupt storm after receiving bad if_id in IRQ handler
Commit 31a7a0bbeb00 ("dpaa2-switch: add bounds check for if_id in IRQ
handler") introduces a range check for if_id to avoid an out-of-bounds
access. If an out-of-bounds if_id is detected, the interrupt status is
not cleared. This may result in an interrupt storm.
Clear the interrupt status after detecting an out-of-bounds if_id to avoid
the problem.
Found by an experimental AI code review agent at Google. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix NULL deref in mesh_matches_local()
mesh_matches_local() unconditionally dereferences ie->mesh_config to
compare mesh configuration parameters. When called from
mesh_rx_csa_frame(), the parsed action-frame elements may not contain a
Mesh Configuration IE, leaving ie->mesh_config NULL and triggering a
kernel NULL pointer dereference.
The other two callers are already safe:
- ieee80211_mesh_rx_bcn_presp() checks !elems->mesh_config before
calling mesh_matches_local()
- mesh_plink_get_event() is only reached through
mesh_process_plink_frame(), which checks !elems->mesh_config, too
mesh_rx_csa_frame() is the only caller that passes raw parsed elements
to mesh_matches_local() without guarding mesh_config. An adjacent
attacker can exploit this by sending a crafted CSA action frame that
includes a valid Mesh ID IE but omits the Mesh Configuration IE,
crashing the kernel.
The captured crash log:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: events_unbound cfg80211_wiphy_work
[...]
Call Trace:
<TASK>
? __pfx_mesh_matches_local (net/mac80211/mesh.c:65)
ieee80211_mesh_rx_queued_mgmt (net/mac80211/mesh.c:1686)
[...]
ieee80211_iface_work (net/mac80211/iface.c:1754 net/mac80211/iface.c:1802)
[...]
cfg80211_wiphy_work (net/wireless/core.c:426)
process_one_work (net/kernel/workqueue.c:3280)
? assign_work (net/kernel/workqueue.c:1219)
worker_thread (net/kernel/workqueue.c:3352)
? __pfx_worker_thread (net/kernel/workqueue.c:3385)
kthread (net/kernel/kthread.c:436)
[...]
ret_from_fork_asm (net/arch/x86/entry/entry_64.S:255)
</TASK>
This patch adds a NULL check for ie->mesh_config at the top of
mesh_matches_local() to return false early when the Mesh Configuration
IE is absent. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ife: Fix metalist update behavior
Whenever an ife action replace changes the metalist, instead of
replacing the old data on the metalist, the current ife code is appending
the new metadata. Aside from being innapropriate behavior, this may lead
to an unbounded addition of metadata to the metalist which might cause an
out of bounds error when running the encode op:
[ 138.423369][ C1] ==================================================================
[ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255
[ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full)
[ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 138.425800][ C1] Call Trace:
[ 138.425804][ C1] <IRQ>
[ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122)
[ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
[ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1))
[ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597)
[ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1))
[ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2))
[ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171)
[ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57)
[ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114)
[ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3))
[ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45)
[ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879)
To solve this issue, fix the replace behavior by adding the metalist to
the ife rcu data structure. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: rawsock: cancel tx_work before socket teardown
In rawsock_release(), cancel any pending tx_work and purge the write
queue before orphaning the socket. rawsock_tx_work runs on the system
workqueue and calls nfc_data_exchange which dereferences the NCI
device. Without synchronization, tx_work can race with socket and
device teardown when a process is killed (e.g. by SIGKILL), leading
to use-after-free or leaked references.
Set SEND_SHUTDOWN first so that if tx_work is already running it will
see the flag and skip transmitting, then use cancel_work_sync to wait
for any in-progress execution to finish, and finally purge any
remaining queued skbs. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Compare MACs in constant time
To prevent timing attacks, MAC comparisons need to be constant-time.
Replace the memcmp() with the correct function, crypto_memneq(). |
| In the Linux kernel, the following vulnerability has been resolved:
drbd: fix "LOGIC BUG" in drbd_al_begin_io_nonblock()
Even though we check that we "should" be able to do lc_get_cumulative()
while holding the device->al_lock spinlock, it may still fail,
if some other code path decided to do lc_try_lock() with bad timing.
If that happened, we logged "LOGIC BUG for enr=...",
but still did not return an error.
The rest of the code now assumed that this request has references
for the relevant activity log extents.
The implcations are that during an active resync, mutual exclusivity of
resync versus application IO is not guaranteed. And a potential crash
at this point may not realizs that these extents could have been target
of in-flight IO and would need to be resynced just in case.
Also, once the request completes, it will give up activity log references it
does not even hold, which will trigger a BUG_ON(refcnt == 0) in lc_put().
Fix:
Do not crash the kernel for a condition that is harmless during normal
operation: also catch "e->refcnt == 0", not only "e == NULL"
when being noisy about "al_complete_io() called on inactive extent %u\n".
And do not try to be smart and "guess" whether something will work, then
be surprised when it does not.
Deal with the fact that it may or may not work. If it does not, remember a
possible "partially in activity log" state (only possible for requests that
cross extent boundaries), and return an error code from
drbd_al_begin_io_nonblock().
A latter call for the same request will then resume from where we left off. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: free skb on nci_transceive early error paths
nci_transceive() takes ownership of the skb passed by the caller,
but the -EPROTO, -EINVAL, and -EBUSY error paths return without
freeing it.
Due to issues clearing NCI_DATA_EXCHANGE fixed by subsequent changes
the nci/nci_dev selftest hits the error path occasionally in NIPA,
and kmemleak detects leaks:
unreferenced object 0xff11000015ce6a40 (size 640):
comm "nci_dev", pid 3954, jiffies 4295441246
hex dump (first 32 bytes):
6b 6b 6b 6b 00 a4 00 0c 02 e1 03 6b 6b 6b 6b 6b kkkk.......kkkkk
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
backtrace (crc 7c40cc2a):
kmem_cache_alloc_node_noprof+0x492/0x630
__alloc_skb+0x11e/0x5f0
alloc_skb_with_frags+0xc6/0x8f0
sock_alloc_send_pskb+0x326/0x3f0
nfc_alloc_send_skb+0x94/0x1d0
rawsock_sendmsg+0x162/0x4c0
do_syscall_64+0x117/0xfc0 |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: in-kernel: always mark signal+subflow endp as used
Syzkaller managed to find a combination of actions that was generating
this warning:
msk->pm.local_addr_used == 0
WARNING: net/mptcp/pm_kernel.c:1071 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline], CPU#1: syz.2.17/961
WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline], CPU#1: syz.2.17/961
WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210, CPU#1: syz.2.17/961
Modules linked in:
CPU: 1 UID: 0 PID: 961 Comm: syz.2.17 Not tainted 6.19.0-08368-gfafda3b4b06b #22 PREEMPT(full)
Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.17.0-debian-1.17.0-1build1 04/01/2014
RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline]
RIP: 0010:mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline]
RIP: 0010:mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210
Code: 89 c5 e8 46 30 6f fe e9 21 fd ff ff 49 83 ed 80 e8 38 30 6f fe 4c 89 ef be 03 00 00 00 e8 db 49 df fe eb ac e8 24 30 6f fe 90 <0f> 0b 90 e9 1d ff ff ff e8 16 30 6f fe eb 05 e8 0f 30 6f fe e8 9a
RSP: 0018:ffffc90001663880 EFLAGS: 00010293
RAX: ffffffff82de1a6c RBX: 0000000000000000 RCX: ffff88800722b500
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff8880158b22d0 R08: 0000000000010425 R09: ffffffffffffffff
R10: ffffffff82de18ba R11: 0000000000000000 R12: ffff88800641a640
R13: ffff8880158b1880 R14: ffff88801ec3c900 R15: ffff88800641a650
FS: 00005555722c3500(0000) GS:ffff8880f909d000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f66346e0f60 CR3: 000000001607c000 CR4: 0000000000350ef0
Call Trace:
<TASK>
genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x4aa/0x5b0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0xc9/0xf0 net/socket.c:742
____sys_sendmsg+0x272/0x3b0 net/socket.c:2592
___sys_sendmsg+0x2de/0x320 net/socket.c:2646
__sys_sendmsg net/socket.c:2678 [inline]
__do_sys_sendmsg net/socket.c:2683 [inline]
__se_sys_sendmsg net/socket.c:2681 [inline]
__x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2681
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x143/0x440 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f66346f826d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc83d8bdc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f6634985fa0 RCX: 00007f66346f826d
RDX: 00000000040000b0 RSI: 0000200000000740 RDI: 0000000000000007
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6634985fa8
R13: 00007f6634985fac R14: 0000000000000000 R15: 0000000000001770
</TASK>
The actions that caused that seem to be:
- Set the MPTCP subflows limit to 0
- Create an MPTCP endpoint with both the 'signal' and 'subflow' flags
- Create a new MPTCP connection from a different address: an ADD_ADDR
linked to the MPTCP endpoint will be sent ('signal' flag), but no
subflows is initiated ('subflow' flag)
- Remove the MPTCP endpoint
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a UAF issue in bpf_trampoline_link_cgroup_shim
The root cause of this bug is that when 'bpf_link_put' reduces the
refcount of 'shim_link->link.link' to zero, the resource is considered
released but may still be referenced via 'tr->progs_hlist' in
'cgroup_shim_find'. The actual cleanup of 'tr->progs_hlist' in
'bpf_shim_tramp_link_release' is deferred. During this window, another
process can cause a use-after-free via 'bpf_trampoline_link_cgroup_shim'.
Based on Martin KaFai Lau's suggestions, I have created a simple patch.
To fix this:
Add an atomic non-zero check in 'bpf_trampoline_link_cgroup_shim'.
Only increment the refcount if it is not already zero.
Testing:
I verified the fix by adding a delay in
'bpf_shim_tramp_link_release' to make the bug easier to trigger:
static void bpf_shim_tramp_link_release(struct bpf_link *link)
{
/* ... */
if (!shim_link->trampoline)
return;
+ msleep(100);
WARN_ON_ONCE(bpf_trampoline_unlink_prog(&shim_link->link,
shim_link->trampoline, NULL));
bpf_trampoline_put(shim_link->trampoline);
}
Before the patch, running a PoC easily reproduced the crash(almost 100%)
with a call trace similar to KaiyanM's report.
After the patch, the bug no longer occurs even after millions of
iterations. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: properly drop the usb interface reference on disconnect
When the device is disconnected from the driver, there is a "dangling"
reference count on the usb interface that was grabbed in the probe
callback. Fix this up by properly dropping the reference after we are
done with it. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/sifive-plic: Fix frozen interrupt due to affinity setting
PLIC ignores interrupt completion message for disabled interrupt, explained
by the specification:
The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the
claim/complete register. The PLIC does not check whether the completion
ID is the same as the last claim ID for that target. If the completion
ID does not match an interrupt source that is currently enabled for
the target, the completion is silently ignored.
This caused problems in the past, because an interrupt can be disabled
while still being handled and plic_irq_eoi() had no effect. That was fixed
by checking if the interrupt is disabled, and if so enable it, before
sending the completion message. That check is done with irqd_irq_disabled().
However, that is not sufficient because the enable bit for the handling
hart can be zero despite irqd_irq_disabled(d) being false. This can happen
when affinity setting is changed while a hart is still handling the
interrupt.
This problem is easily reproducible by dumping a large file to uart (which
generates lots of interrupts) and at the same time keep changing the uart
interrupt's affinity setting. The uart port becomes frozen almost
instantaneously.
Fix this by checking PLIC's enable bit instead of irqd_irq_disabled(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: Reset prog ptr to old_prog in case of error in mtk_xdp_setup()
Reset eBPF program pointer to old_prog and do not decrease its ref-count
if mtk_open routine in mtk_xdp_setup() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: fix use-after-free in lbs_free_adapter()
The lbs_free_adapter() function uses timer_delete() (non-synchronous)
for both command_timer and tx_lockup_timer before the structure is
freed. This is incorrect because timer_delete() does not wait for
any running timer callback to complete.
If a timer callback is executing when lbs_free_adapter() is called,
the callback will access freed memory since lbs_cfg_free() frees the
containing structure immediately after lbs_free_adapter() returns.
Both timer callbacks (lbs_cmd_timeout_handler and lbs_tx_lockup_handler)
access priv->driver_lock, priv->cur_cmd, priv->dev, and other fields,
which would all be use-after-free violations.
Use timer_delete_sync() instead to ensure any running timer callback
has completed before returning.
This bug was introduced in commit 8f641d93c38a ("libertas: detect TX
lockups and reset hardware") where del_timer() was used instead of
del_timer_sync() in the cleanup path. The command_timer has had the
same issue since the driver was first written. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix NULL pointer dereference in mesh_rx_csa_frame()
In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced
at lines 1638 and 1642 without a prior NULL check:
ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl;
...
pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value);
The mesh_matches_local() check above only validates the Mesh ID,
Mesh Configuration, and Supported Rates IEs. It does not verify the
presence of the Mesh Channel Switch Parameters IE (element ID 118).
When a received CSA action frame omits that IE, ieee802_11_parse_elems()
leaves elems->mesh_chansw_params_ie as NULL, and the unconditional
dereference causes a kernel NULL pointer dereference.
A remote mesh peer with an established peer link (PLINK_ESTAB) can
trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame
that includes a matching Mesh ID and Mesh Configuration IE but omits the
Mesh Channel Switch Parameters IE. No authentication beyond the default
open mesh peering is required.
Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211]
CR2: 0000000000000000
Fix by adding a NULL check for mesh_chansw_params_ie after
mesh_matches_local() returns, consistent with how other optional IEs
are guarded throughout the mesh code.
The bug has been present since v3.13 (released 2014-01-19). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_gate: snapshot parameters with RCU on replace
The gate action can be replaced while the hrtimer callback or dump path is
walking the schedule list.
Convert the parameters to an RCU-protected snapshot and swap updates under
tcf_lock, freeing the previous snapshot via call_rcu(). When REPLACE omits
the entry list, preserve the existing schedule so the effective state is
unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fix use-after-free in nf_tables_addchain()
nf_tables_addchain() publishes the chain to table->chains via
list_add_tail_rcu() (in nft_chain_add()) before registering hooks.
If nf_tables_register_hook() then fails, the error path calls
nft_chain_del() (list_del_rcu()) followed by nf_tables_chain_destroy()
with no RCU grace period in between.
This creates two use-after-free conditions:
1) Control-plane: nf_tables_dump_chains() traverses table->chains
under rcu_read_lock(). A concurrent dump can still be walking
the chain when the error path frees it.
2) Packet path: for NFPROTO_INET, nf_register_net_hook() briefly
installs the IPv4 hook before IPv6 registration fails. Packets
entering nft_do_chain() via the transient IPv4 hook can still be
dereferencing chain->blob_gen_X when the error path frees the
chain.
Add synchronize_rcu() between nft_chain_del() and the chain destroy
so that all RCU readers -- both dump threads and in-flight packet
evaluation -- have finished before the chain is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: use skb_header_pointer_careful()
skb_header_pointer() does not fully validate negative @offset values.
Use skb_header_pointer_careful() instead.
GangMin Kim provided a report and a repro fooling u32_classify():
BUG: KASAN: slab-out-of-bounds in u32_classify+0x1180/0x11b0
net/sched/cls_u32.c:221 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate()
nft_map_catchall_activate() has an inverted element activity check
compared to its non-catchall counterpart nft_mapelem_activate() and
compared to what is logically required.
nft_map_catchall_activate() is called from the abort path to re-activate
catchall map elements that were deactivated during a failed transaction.
It should skip elements that are already active (they don't need
re-activation) and process elements that are inactive (they need to be
restored). Instead, the current code does the opposite: it skips inactive
elements and processes active ones.
Compare the non-catchall activate callback, which is correct:
nft_mapelem_activate():
if (nft_set_elem_active(ext, iter->genmask))
return 0; /* skip active, process inactive */
With the buggy catchall version:
nft_map_catchall_activate():
if (!nft_set_elem_active(ext, genmask))
continue; /* skip inactive, process active */
The consequence is that when a DELSET operation is aborted,
nft_setelem_data_activate() is never called for the catchall element.
For NFT_GOTO verdict elements, this means nft_data_hold() is never
called to restore the chain->use reference count. Each abort cycle
permanently decrements chain->use. Once chain->use reaches zero,
DELCHAIN succeeds and frees the chain while catchall verdict elements
still reference it, resulting in a use-after-free.
This is exploitable for local privilege escalation from an unprivileged
user via user namespaces + nftables on distributions that enable
CONFIG_USER_NS and CONFIG_NF_TABLES.
Fix by removing the negation so the check matches nft_mapelem_activate():
skip active elements, process inactive ones. |
