| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Fix the behavior of READ near OFFSET_MAX
Dan Aloni reports:
> Due to commit 8cfb9015280d ("NFS: Always provide aligned buffers to
> the RPC read layers") on the client, a read of 0xfff is aligned up
> to server rsize of 0x1000.
>
> As a result, in a test where the server has a file of size
> 0x7fffffffffffffff, and the client tries to read from the offset
> 0x7ffffffffffff000, the read causes loff_t overflow in the server
> and it returns an NFS code of EINVAL to the client. The client as
> a result indefinitely retries the request.
The Linux NFS client does not handle NFS?ERR_INVAL, even though all
NFS specifications permit servers to return that status code for a
READ.
Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed
and return a short result. Set the EOF flag in the result to prevent
the client from retrying the READ request. This behavior appears to
be consistent with Solaris NFS servers.
Note that NFSv3 and NFSv4 use u64 offset values on the wire. These
must be converted to loff_t internally before use -- an implicit
type cast is not adequate for this purpose. Otherwise VFS checks
against sb->s_maxbytes do not work properly. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: lock against ->sock changing during sysfs read
->sock can be set to NULL asynchronously unless ->recv_mutex is held.
So it is important to hold that mutex. Otherwise a sysfs read can
trigger an oops.
Commit 17f09d3f619a ("SUNRPC: Check if the xprt is connected before
handling sysfs reads") appears to attempt to fix this problem, but it
only narrows the race window. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: ti: Fix missing sentinel for clk_div_table
_get_table_maxdiv() tries to access "clk_div_table" array out of bound
defined in phy-j721e-wiz.c. Add a sentinel entry to prevent
the following global-out-of-bounds error reported by enabling KASAN.
[ 9.552392] BUG: KASAN: global-out-of-bounds in _get_maxdiv+0xc0/0x148
[ 9.558948] Read of size 4 at addr ffff8000095b25a4 by task kworker/u4:1/38
[ 9.565926]
[ 9.567441] CPU: 1 PID: 38 Comm: kworker/u4:1 Not tainted 5.16.0-116492-gdaadb3bd0e8d-dirty #360
[ 9.576242] Hardware name: Texas Instruments J721e EVM (DT)
[ 9.581832] Workqueue: events_unbound deferred_probe_work_func
[ 9.587708] Call trace:
[ 9.590174] dump_backtrace+0x20c/0x218
[ 9.594038] show_stack+0x18/0x68
[ 9.597375] dump_stack_lvl+0x9c/0xd8
[ 9.601062] print_address_description.constprop.0+0x78/0x334
[ 9.606830] kasan_report+0x1f0/0x260
[ 9.610517] __asan_load4+0x9c/0xd8
[ 9.614030] _get_maxdiv+0xc0/0x148
[ 9.617540] divider_determine_rate+0x88/0x488
[ 9.622005] divider_round_rate_parent+0xc8/0x124
[ 9.626729] wiz_clk_div_round_rate+0x54/0x68
[ 9.631113] clk_core_determine_round_nolock+0x124/0x158
[ 9.636448] clk_core_round_rate_nolock+0x68/0x138
[ 9.641260] clk_core_set_rate_nolock+0x268/0x3a8
[ 9.645987] clk_set_rate+0x50/0xa8
[ 9.649499] cdns_sierra_phy_init+0x88/0x248
[ 9.653794] phy_init+0x98/0x108
[ 9.657046] cdns_pcie_enable_phy+0xa0/0x170
[ 9.661340] cdns_pcie_init_phy+0x250/0x2b0
[ 9.665546] j721e_pcie_probe+0x4b8/0x798
[ 9.669579] platform_probe+0x8c/0x108
[ 9.673350] really_probe+0x114/0x630
[ 9.677037] __driver_probe_device+0x18c/0x220
[ 9.681505] driver_probe_device+0xac/0x150
[ 9.685712] __device_attach_driver+0xec/0x170
[ 9.690178] bus_for_each_drv+0xf0/0x158
[ 9.694124] __device_attach+0x184/0x210
[ 9.698070] device_initial_probe+0x14/0x20
[ 9.702277] bus_probe_device+0xec/0x100
[ 9.706223] deferred_probe_work_func+0x124/0x180
[ 9.710951] process_one_work+0x4b0/0xbc0
[ 9.714983] worker_thread+0x74/0x5d0
[ 9.718668] kthread+0x214/0x230
[ 9.721919] ret_from_fork+0x10/0x20
[ 9.725520]
[ 9.727032] The buggy address belongs to the variable:
[ 9.732183] clk_div_table+0x24/0x440 |
| In the Linux kernel, the following vulnerability has been resolved:
mm: don't try to NUMA-migrate COW pages that have other uses
Oded Gabbay reports that enabling NUMA balancing causes corruption with
his Gaudi accelerator test load:
"All the details are in the bug, but the bottom line is that somehow,
this patch causes corruption when the numa balancing feature is
enabled AND we don't use process affinity AND we use GUP to pin pages
so our accelerator can DMA to/from system memory.
Either disabling numa balancing, using process affinity to bind to
specific numa-node or reverting this patch causes the bug to
disappear"
and Oded bisected the issue to commit 09854ba94c6a ("mm: do_wp_page()
simplification").
Now, the NUMA balancing shouldn't actually be changing the writability
of a page, and as such shouldn't matter for COW. But it appears it
does. Suspicious.
However, regardless of that, the condition for enabling NUMA faults in
change_pte_range() is nonsensical. It uses "page_mapcount(page)" to
decide if a COW page should be NUMA-protected or not, and that makes
absolutely no sense.
The number of mappings a page has is irrelevant: not only does GUP get a
reference to a page as in Oded's case, but the other mappings migth be
paged out and the only reference to them would be in the page count.
Since we should never try to NUMA-balance a page that we can't move
anyway due to other references, just fix the code to use 'page_count()'.
Oded confirms that that fixes his issue.
Now, this does imply that something in NUMA balancing ends up changing
page protections (other than the obvious one of making the page
inaccessible to get the NUMA faulting information). Otherwise the COW
simplification wouldn't matter - since doing the GUP on the page would
make sure it's writable.
The cause of that permission change would be good to figure out too,
since it clearly results in spurious COW events - but fixing the
nonsensical test that just happened to work before is obviously the
CorrectThing(tm) to do regardless. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix a possible use-after-free in controller reset during load
Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl
readiness for AER submission. This may lead to a use-after-free
condition that was observed with nvme-tcp.
The race condition may happen in the following scenario:
1. driver executes its reset_ctrl_work
2. -> nvme_stop_ctrl - flushes ctrl async_event_work
3. ctrl sends AEN which is received by the host, which in turn
schedules AEN handling
4. teardown admin queue (which releases the queue socket)
5. AEN processed, submits another AER, calling the driver to submit
6. driver attempts to send the cmd
==> use-after-free
In order to fix that, add ctrl state check to validate the ctrl
is actually able to accept the AER submission.
This addresses the above race in controller resets because the driver
during teardown should:
1. change ctrl state to RESETTING
2. flush async_event_work (as well as other async work elements)
So after 1,2, any other AER command will find the
ctrl state to be RESETTING and bail out without submitting the AER. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: fix possible use-after-free in transport error_recovery work
While nvme_tcp_submit_async_event_work is checking the ctrl and queue
state before preparing the AER command and scheduling io_work, in order
to fully prevent a race where this check is not reliable the error
recovery work must flush async_event_work before continuing to destroy
the admin queue after setting the ctrl state to RESETTING such that
there is no race .submit_async_event and the error recovery handler
itself changing the ctrl state. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-rdma: fix possible use-after-free in transport error_recovery work
While nvme_rdma_submit_async_event_work is checking the ctrl and queue
state before preparing the AER command and scheduling io_work, in order
to fully prevent a race where this check is not reliable the error
recovery work must flush async_event_work before continuing to destroy
the admin queue after setting the ctrl state to RESETTING such that
there is no race .submit_async_event and the error recovery handler
itself changing the ctrl state. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: remove vsock from connected table when connect is interrupted by a signal
vsock_connect() expects that the socket could already be in the
TCP_ESTABLISHED state when the connecting task wakes up with a signal
pending. If this happens the socket will be in the connected table, and
it is not removed when the socket state is reset. In this situation it's
common for the process to retry connect(), and if the connection is
successful the socket will be added to the connected table a second
time, corrupting the list.
Prevent this by calling vsock_remove_connected() if a signal is received
while waiting for a connection. This is harmless if the socket is not in
the connected table, and if it is in the table then removing it will
prevent list corruption from a double add.
Note for backporting: this patch requires d5afa82c977e ("vsock: correct
removal of socket from the list"), which is in all current stable trees
except 4.9.y. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: use rcu-safe version of ipv6_get_lladdr()
Some time ago 8965779d2c0e ("ipv6,mcast: always hold idev->lock before mca_lock")
switched ipv6_get_lladdr() to __ipv6_get_lladdr(), which is rcu-unsafe
version. That was OK, because idev->lock was held for these codepaths.
In 88e2ca308094 ("mld: convert ifmcaddr6 to RCU") these external locks were
removed, so we probably need to restore the original rcu-safe call.
Otherwise, we occasionally get a machine crashed/stalled with the following
in dmesg:
[ 3405.966610][T230589] general protection fault, probably for non-canonical address 0xdead00000000008c: 0000 [#1] SMP NOPTI
[ 3405.982083][T230589] CPU: 44 PID: 230589 Comm: kworker/44:3 Tainted: G O 5.15.19-cloudflare-2022.2.1 #1
[ 3405.998061][T230589] Hardware name: SUPA-COOL-SERV
[ 3406.009552][T230589] Workqueue: mld mld_ifc_work
[ 3406.017224][T230589] RIP: 0010:__ipv6_get_lladdr+0x34/0x60
[ 3406.025780][T230589] Code: 57 10 48 83 c7 08 48 89 e5 48 39 d7 74 3e 48 8d 82 38 ff ff ff eb 13 48 8b 90 d0 00 00 00 48 8d 82 38 ff ff ff 48 39 d7 74 22 <66> 83 78 32 20 77 1b 75 e4 89 ca 23 50 2c 75 dd 48 8b 50 08 48 8b
[ 3406.055748][T230589] RSP: 0018:ffff94e4b3fc3d10 EFLAGS: 00010202
[ 3406.065617][T230589] RAX: dead00000000005a RBX: ffff94e4b3fc3d30 RCX: 0000000000000040
[ 3406.077477][T230589] RDX: dead000000000122 RSI: ffff94e4b3fc3d30 RDI: ffff8c3a31431008
[ 3406.089389][T230589] RBP: ffff94e4b3fc3d10 R08: 0000000000000000 R09: 0000000000000000
[ 3406.101445][T230589] R10: ffff8c3a31430000 R11: 000000000000000b R12: ffff8c2c37887100
[ 3406.113553][T230589] R13: ffff8c3a39537000 R14: 00000000000005dc R15: ffff8c3a31431000
[ 3406.125730][T230589] FS: 0000000000000000(0000) GS:ffff8c3b9fc80000(0000) knlGS:0000000000000000
[ 3406.138992][T230589] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3406.149895][T230589] CR2: 00007f0dfea1db60 CR3: 000000387b5f2000 CR4: 0000000000350ee0
[ 3406.162421][T230589] Call Trace:
[ 3406.170235][T230589] <TASK>
[ 3406.177736][T230589] mld_newpack+0xfe/0x1a0
[ 3406.186686][T230589] add_grhead+0x87/0xa0
[ 3406.195498][T230589] add_grec+0x485/0x4e0
[ 3406.204310][T230589] ? newidle_balance+0x126/0x3f0
[ 3406.214024][T230589] mld_ifc_work+0x15d/0x450
[ 3406.223279][T230589] process_one_work+0x1e6/0x380
[ 3406.232982][T230589] worker_thread+0x50/0x3a0
[ 3406.242371][T230589] ? rescuer_thread+0x360/0x360
[ 3406.252175][T230589] kthread+0x127/0x150
[ 3406.261197][T230589] ? set_kthread_struct+0x40/0x40
[ 3406.271287][T230589] ret_from_fork+0x22/0x30
[ 3406.280812][T230589] </TASK>
[ 3406.288937][T230589] Modules linked in: ... [last unloaded: kheaders]
[ 3406.476714][T230589] ---[ end trace 3525a7655f2f3b9e ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
mctp: fix use after free
Clang static analysis reports this problem
route.c:425:4: warning: Use of memory after it is freed
trace_mctp_key_acquire(key);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
When mctp_key_add() fails, key is freed but then is later
used in trace_mctp_key_acquire(). Add an else statement
to use the key only when mctp_key_add() is successful. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: extable: fix load_unaligned_zeropad() reg indices
In ex_handler_load_unaligned_zeropad() we erroneously extract the data and
addr register indices from ex->type rather than ex->data. As ex->type will
contain EX_TYPE_LOAD_UNALIGNED_ZEROPAD (i.e. 4):
* We'll always treat X0 as the address register, since EX_DATA_REG_ADDR is
extracted from bits [9:5]. Thus, we may attempt to dereference an
arbitrary address as X0 may hold an arbitrary value.
* We'll always treat X4 as the data register, since EX_DATA_REG_DATA is
extracted from bits [4:0]. Thus we will corrupt X4 and cause arbitrary
behaviour within load_unaligned_zeropad() and its caller.
Fix this by extracting both values from ex->data as originally intended.
On an MTE-enabled QEMU image we are hitting the following crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
fixup_exception+0xc4/0x108
__do_kernel_fault+0x3c/0x268
do_tag_check_fault+0x3c/0x104
do_mem_abort+0x44/0xf4
el1_abort+0x40/0x64
el1h_64_sync_handler+0x60/0xa0
el1h_64_sync+0x7c/0x80
link_path_walk+0x150/0x344
path_openat+0xa0/0x7dc
do_filp_open+0xb8/0x168
do_sys_openat2+0x88/0x17c
__arm64_sys_openat+0x74/0xa0
invoke_syscall+0x48/0x148
el0_svc_common+0xb8/0xf8
do_el0_svc+0x28/0x88
el0_svc+0x24/0x84
el0t_64_sync_handler+0x88/0xec
el0t_64_sync+0x1b4/0x1b8
Code: f8695a69 71007d1f 540000e0 927df12a (f940014a) |
| In the Linux kernel, the following vulnerability has been resolved:
rpmsg: char: Fix race between the release of rpmsg_ctrldev and cdev
struct rpmsg_ctrldev contains a struct cdev. The current code frees
the rpmsg_ctrldev struct in rpmsg_ctrldev_release_device(), but the
cdev is a managed object, therefore its release is not predictable
and the rpmsg_ctrldev could be freed before the cdev is entirely
released, as in the backtrace below.
[ 93.625603] ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x7c
[ 93.636115] WARNING: CPU: 0 PID: 12 at lib/debugobjects.c:488 debug_print_object+0x13c/0x1b0
[ 93.644799] Modules linked in: veth xt_cgroup xt_MASQUERADE rfcomm algif_hash algif_skcipher af_alg uinput ip6table_nat fuse uvcvideo videobuf2_vmalloc venus_enc venus_dec videobuf2_dma_contig hci_uart btandroid btqca snd_soc_rt5682_i2c bluetooth qcom_spmi_temp_alarm snd_soc_rt5682v
[ 93.715175] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G B 5.4.163-lockdep #26
[ 93.723855] Hardware name: Google Lazor (rev3 - 8) with LTE (DT)
[ 93.730055] Workqueue: events kobject_delayed_cleanup
[ 93.735271] pstate: 60c00009 (nZCv daif +PAN +UAO)
[ 93.740216] pc : debug_print_object+0x13c/0x1b0
[ 93.744890] lr : debug_print_object+0x13c/0x1b0
[ 93.749555] sp : ffffffacf5bc7940
[ 93.752978] x29: ffffffacf5bc7940 x28: dfffffd000000000
[ 93.758448] x27: ffffffacdb11a800 x26: dfffffd000000000
[ 93.763916] x25: ffffffd0734f856c x24: dfffffd000000000
[ 93.769389] x23: 0000000000000000 x22: ffffffd0733c35b0
[ 93.774860] x21: ffffffd0751994a0 x20: ffffffd075ec27c0
[ 93.780338] x19: ffffffd075199100 x18: 00000000000276e0
[ 93.785814] x17: 0000000000000000 x16: dfffffd000000000
[ 93.791291] x15: ffffffffffffffff x14: 6e6968207473696c
[ 93.796768] x13: 0000000000000000 x12: ffffffd075e2b000
[ 93.802244] x11: 0000000000000001 x10: 0000000000000000
[ 93.807723] x9 : d13400dff1921900 x8 : d13400dff1921900
[ 93.813200] x7 : 0000000000000000 x6 : 0000000000000000
[ 93.818676] x5 : 0000000000000080 x4 : 0000000000000000
[ 93.824152] x3 : ffffffd0732a0fa4 x2 : 0000000000000001
[ 93.829628] x1 : ffffffacf5bc7580 x0 : 0000000000000061
[ 93.835104] Call trace:
[ 93.837644] debug_print_object+0x13c/0x1b0
[ 93.841963] __debug_check_no_obj_freed+0x25c/0x3c0
[ 93.846987] debug_check_no_obj_freed+0x18/0x20
[ 93.851669] slab_free_freelist_hook+0xbc/0x1e4
[ 93.856346] kfree+0xfc/0x2f4
[ 93.859416] rpmsg_ctrldev_release_device+0x78/0xb8
[ 93.864445] device_release+0x84/0x168
[ 93.868310] kobject_cleanup+0x12c/0x298
[ 93.872356] kobject_delayed_cleanup+0x10/0x18
[ 93.876948] process_one_work+0x578/0x92c
[ 93.881086] worker_thread+0x804/0xcf8
[ 93.884963] kthread+0x2a8/0x314
[ 93.888303] ret_from_fork+0x10/0x18
The cdev_device_add/del() API was created to address this issue (see
commit '233ed09d7fda ("chardev: add helper function to register char
devs with a struct device")'), use it instead of cdev add/del(). |
| In the Linux kernel, the following vulnerability has been resolved:
phylib: fix potential use-after-free
Commit bafbdd527d56 ("phylib: Add device reset GPIO support") added call
to phy_device_reset(phydev) after the put_device() call in phy_detach().
The comment before the put_device() call says that the phydev might go
away with put_device().
Fix potential use-after-free by calling phy_device_reset() before
put_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: Transitional solution for clcsock race issue
We encountered a crash in smc_setsockopt() and it is caused by
accessing smc->clcsock after clcsock was released.
BUG: kernel NULL pointer dereference, address: 0000000000000020
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 50309 Comm: nginx Kdump: loaded Tainted: G E 5.16.0-rc4+ #53
RIP: 0010:smc_setsockopt+0x59/0x280 [smc]
Call Trace:
<TASK>
__sys_setsockopt+0xfc/0x190
__x64_sys_setsockopt+0x20/0x30
do_syscall_64+0x34/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f16ba83918e
</TASK>
This patch tries to fix it by holding clcsock_release_lock and
checking whether clcsock has already been released before access.
In case that a crash of the same reason happens in smc_getsockopt()
or smc_switch_to_fallback(), this patch also checkes smc->clcsock
in them too. And the caller of smc_switch_to_fallback() will identify
whether fallback succeeds according to the return value. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Avoid field-overflowing memcpy()
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Use flexible arrays instead of zero-element arrays (which look like they
are always overflowing) and split the cross-field memcpy() into two halves
that can be appropriately bounds-checked by the compiler.
We were doing:
#define ETH_HLEN 14
#define VLAN_HLEN 4
...
#define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN)
...
struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi);
...
struct mlx5_wqe_eth_seg *eseg = &wqe->eth;
struct mlx5_wqe_data_seg *dseg = wqe->data;
...
memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE);
target is wqe->eth.inline_hdr.start (which the compiler sees as being
2 bytes in size), but copying 18, intending to write across start
(really vlan_tci, 2 bytes). The remaining 16 bytes get written into
wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr
(8 bytes).
struct mlx5e_tx_wqe {
struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */
struct mlx5_wqe_eth_seg eth; /* 16 16 */
struct mlx5_wqe_data_seg data[]; /* 32 0 */
/* size: 32, cachelines: 1, members: 3 */
/* last cacheline: 32 bytes */
};
struct mlx5_wqe_eth_seg {
u8 swp_outer_l4_offset; /* 0 1 */
u8 swp_outer_l3_offset; /* 1 1 */
u8 swp_inner_l4_offset; /* 2 1 */
u8 swp_inner_l3_offset; /* 3 1 */
u8 cs_flags; /* 4 1 */
u8 swp_flags; /* 5 1 */
__be16 mss; /* 6 2 */
__be32 flow_table_metadata; /* 8 4 */
union {
struct {
__be16 sz; /* 12 2 */
u8 start[2]; /* 14 2 */
} inline_hdr; /* 12 4 */
struct {
__be16 type; /* 12 2 */
__be16 vlan_tci; /* 14 2 */
} insert; /* 12 4 */
__be32 trailer; /* 12 4 */
}; /* 12 4 */
/* size: 16, cachelines: 1, members: 9 */
/* last cacheline: 16 bytes */
};
struct mlx5_wqe_data_seg {
__be32 byte_count; /* 0 4 */
__be32 lkey; /* 4 4 */
__be64 addr; /* 8 8 */
/* size: 16, cachelines: 1, members: 3 */
/* last cacheline: 16 bytes */
};
So, split the memcpy() so the compiler can reason about the buffer
sizes.
"pahole" shows no size nor member offset changes to struct mlx5e_tx_wqe
nor struct mlx5e_umr_wqe. "objdump -d" shows no meaningful object
code changes (i.e. only source line number induced differences and
optimizations). |
| In the Linux kernel, the following vulnerability has been resolved:
net: amd-xgbe: Fix skb data length underflow
There will be BUG_ON() triggered in include/linux/skbuff.h leading to
intermittent kernel panic, when the skb length underflow is detected.
Fix this by dropping the packet if such length underflows are seen
because of inconsistencies in the hardware descriptors. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/hfi1: Fix panic with larger ipoib send_queue_size
When the ipoib send_queue_size is increased from the default the following
panic happens:
RIP: 0010:hfi1_ipoib_drain_tx_ring+0x45/0xf0 [hfi1]
Code: 31 e4 eb 0f 8b 85 c8 02 00 00 41 83 c4 01 44 39 e0 76 60 8b 8d cc 02 00 00 44 89 e3 be 01 00 00 00 d3 e3 48 03 9d c0 02 00 00 <c7> 83 18 01 00 00 00 00 00 00 48 8b bb 30 01 00 00 e8 25 af a7 e0
RSP: 0018:ffffc9000798f4a0 EFLAGS: 00010286
RAX: 0000000000008000 RBX: ffffc9000aa0f000 RCX: 000000000000000f
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: ffff88810ff08000 R08: ffff88889476d900 R09: 0000000000000101
R10: 0000000000000000 R11: ffffc90006590ff8 R12: 0000000000000200
R13: ffffc9000798fba8 R14: 0000000000000000 R15: 0000000000000001
FS: 00007fd0f79cc3c0(0000) GS:ffff88885fb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc9000aa0f118 CR3: 0000000889c84001 CR4: 00000000001706e0
Call Trace:
<TASK>
hfi1_ipoib_napi_tx_disable+0x45/0x60 [hfi1]
hfi1_ipoib_dev_stop+0x18/0x80 [hfi1]
ipoib_ib_dev_stop+0x1d/0x40 [ib_ipoib]
ipoib_stop+0x48/0xc0 [ib_ipoib]
__dev_close_many+0x9e/0x110
__dev_change_flags+0xd9/0x210
dev_change_flags+0x21/0x60
do_setlink+0x31c/0x10f0
? __nla_validate_parse+0x12d/0x1a0
? __nla_parse+0x21/0x30
? inet6_validate_link_af+0x5e/0xf0
? cpumask_next+0x1f/0x20
? __snmp6_fill_stats64.isra.53+0xbb/0x140
? __nla_validate_parse+0x47/0x1a0
__rtnl_newlink+0x530/0x910
? pskb_expand_head+0x73/0x300
? __kmalloc_node_track_caller+0x109/0x280
? __nla_put+0xc/0x20
? cpumask_next_and+0x20/0x30
? update_sd_lb_stats.constprop.144+0xd3/0x820
? _raw_spin_unlock_irqrestore+0x25/0x37
? __wake_up_common_lock+0x87/0xc0
? kmem_cache_alloc_trace+0x3d/0x3d0
rtnl_newlink+0x43/0x60
The issue happens when the shift that should have been a function of the
txq item size mistakenly used the ring size.
Fix by using the item size. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Avoid consuming a stale esr value when SError occur
When any exception other than an IRQ occurs, the CPU updates the ESR_EL2
register with the exception syndrome. An SError may also become pending,
and will be synchronised by KVM. KVM notes the exception type, and whether
an SError was synchronised in exit_code.
When an exception other than an IRQ occurs, fixup_guest_exit() updates
vcpu->arch.fault.esr_el2 from the hardware register. When an SError was
synchronised, the vcpu esr value is used to determine if the exception
was due to an HVC. If so, ELR_EL2 is moved back one instruction. This
is so that KVM can process the SError first, and re-execute the HVC if
the guest survives the SError.
But if an IRQ synchronises an SError, the vcpu's esr value is stale.
If the previous non-IRQ exception was an HVC, KVM will corrupt ELR_EL2,
causing an unrelated guest instruction to be executed twice.
Check ARM_EXCEPTION_CODE() before messing with ELR_EL2, IRQs don't
update this register so don't need to check. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: Forward wakeup to smc socket waitqueue after fallback
When we replace TCP with SMC and a fallback occurs, there may be
some socket waitqueue entries remaining in smc socket->wq, such
as eppoll_entries inserted by userspace applications.
After the fallback, data flows over TCP/IP and only clcsocket->wq
will be woken up. Applications can't be notified by the entries
which were inserted in smc socket->wq before fallback. So we need
a mechanism to wake up smc socket->wq at the same time if some
entries remaining in it.
The current workaround is to transfer the entries from smc socket->wq
to clcsock->wq during the fallback. But this may cause a crash
like this:
general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G E 5.16.0+ #107
RIP: 0010:__wake_up_common+0x65/0x170
Call Trace:
<IRQ>
__wake_up_common_lock+0x7a/0xc0
sock_def_readable+0x3c/0x70
tcp_data_queue+0x4a7/0xc40
tcp_rcv_established+0x32f/0x660
? sk_filter_trim_cap+0xcb/0x2e0
tcp_v4_do_rcv+0x10b/0x260
tcp_v4_rcv+0xd2a/0xde0
ip_protocol_deliver_rcu+0x3b/0x1d0
ip_local_deliver_finish+0x54/0x60
ip_local_deliver+0x6a/0x110
? tcp_v4_early_demux+0xa2/0x140
? tcp_v4_early_demux+0x10d/0x140
ip_sublist_rcv_finish+0x49/0x60
ip_sublist_rcv+0x19d/0x230
ip_list_rcv+0x13e/0x170
__netif_receive_skb_list_core+0x1c2/0x240
netif_receive_skb_list_internal+0x1e6/0x320
napi_complete_done+0x11d/0x190
mlx5e_napi_poll+0x163/0x6b0 [mlx5_core]
__napi_poll+0x3c/0x1b0
net_rx_action+0x27c/0x300
__do_softirq+0x114/0x2d2
irq_exit_rcu+0xb4/0xe0
common_interrupt+0xba/0xe0
</IRQ>
<TASK>
The crash is caused by privately transferring waitqueue entries from
smc socket->wq to clcsock->wq. The owners of these entries, such as
epoll, have no idea that the entries have been transferred to a
different socket wait queue and still use original waitqueue spinlock
(smc socket->wq.wait.lock) to make the entries operation exclusive,
but it doesn't work. The operations to the entries, such as removing
from the waitqueue (now is clcsock->wq after fallback), may cause a
crash when clcsock waitqueue is being iterated over at the moment.
This patch tries to fix this by no longer transferring wait queue
entries privately, but introducing own implementations of clcsock's
callback functions in fallback situation. The callback functions will
forward the wakeup to smc socket->wq if clcsock->wq is actually woken
up and smc socket->wq has remaining entries. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macsec: Fix offload support for NETDEV_UNREGISTER event
Current macsec netdev notify handler handles NETDEV_UNREGISTER event by
releasing relevant SW resources only, this causes resources leak in case
of macsec HW offload, as the underlay driver was not notified to clean
it's macsec offload resources.
Fix by calling the underlay driver to clean it's relevant resources
by moving offload handling from macsec_dellink() to macsec_common_dellink()
when handling NETDEV_UNREGISTER event. |
