Filtered by vendor Linux
Subscriptions
Total
12942 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-37918 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: avoid NULL pointer dereference in skb_dequeue() A NULL pointer dereference can occur in skb_dequeue() when processing a QCA firmware crash dump on WCN7851 (0489:e0f3). [ 93.672166] Bluetooth: hci0: ACL memdump size(589824) [ 93.672475] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 93.672517] Workqueue: hci0 hci_devcd_rx [bluetooth] [ 93.672598] RIP: 0010:skb_dequeue+0x50/0x80 The issue stems from handle_dump_pkt_qca() returning 0 even when a dump packet is successfully processed. This is because it incorrectly forwards the return value of hci_devcd_init() (which returns 0 on success). As a result, the caller (btusb_recv_acl_qca() or btusb_recv_evt_qca()) assumes the packet was not handled and passes it to hci_recv_frame(), leading to premature kfree() of the skb. Later, hci_devcd_rx() attempts to dequeue the same skb from the dump queue, resulting in a NULL pointer dereference. Fix this by: 1. Making handle_dump_pkt_qca() return 0 on success and negative errno on failure, consistent with kernel conventions. 2. Splitting dump packet detection into separate functions for ACL and event packets for better structure and readability. This ensures dump packets are properly identified and consumed, avoiding double handling and preventing NULL pointer access. | ||||
| CVE-2025-37919 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot Update chip data using dev_get_drvdata(dev->parent) to fix NULL pointer deref in acp_i2s_set_tdm_slot. | ||||
| CVE-2025-37920 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xsk: Fix race condition in AF_XDP generic RX path Move rx_lock from xsk_socket to xsk_buff_pool. Fix synchronization for shared umem mode in generic RX path where multiple sockets share single xsk_buff_pool. RX queue is exclusive to xsk_socket, while FILL queue can be shared between multiple sockets. This could result in race condition where two CPU cores access RX path of two different sockets sharing the same umem. Protect both queues by acquiring spinlock in shared xsk_buff_pool. Lock contention may be minimized in the future by some per-thread FQ buffering. It's safe and necessary to move spin_lock_bh(rx_lock) after xsk_rcv_check(): * xs->pool and spinlock_init is synchronized by xsk_bind() -> xsk_is_bound() memory barriers. * xsk_rcv_check() may return true at the moment of xsk_release() or xsk_unbind_dev(), however this will not cause any data races or race conditions. xsk_unbind_dev() removes xdp socket from all maps and waits for completion of all outstanding rx operations. Packets in RX path will either complete safely or drop. | ||||
| CVE-2025-37921 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: vnifilter: Fix unlocked deletion of default FDB entry When a VNI is deleted from a VXLAN device in 'vnifilter' mode, the FDB entry associated with the default remote (assuming one was configured) is deleted without holding the hash lock. This is wrong and will result in a warning [1] being generated by the lockdep annotation that was added by commit ebe642067455 ("vxlan: Create wrappers for FDB lookup"). Reproducer: # ip link add vx0 up type vxlan dstport 4789 external vnifilter local 192.0.2.1 # bridge vni add vni 10010 remote 198.51.100.1 dev vx0 # bridge vni del vni 10010 dev vx0 Fix by acquiring the hash lock before the deletion and releasing it afterwards. Blame the original commit that introduced the issue rather than the one that exposed it. [1] WARNING: CPU: 3 PID: 392 at drivers/net/vxlan/vxlan_core.c:417 vxlan_find_mac+0x17f/0x1a0 [...] RIP: 0010:vxlan_find_mac+0x17f/0x1a0 [...] Call Trace: <TASK> __vxlan_fdb_delete+0xbe/0x560 vxlan_vni_delete_group+0x2ba/0x940 vxlan_vni_del.isra.0+0x15f/0x580 vxlan_process_vni_filter+0x38b/0x7b0 vxlan_vnifilter_process+0x3bb/0x510 rtnetlink_rcv_msg+0x2f7/0xb70 netlink_rcv_skb+0x131/0x360 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 __sys_sendmsg+0x121/0x1b0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 | ||||
| CVE-2025-37923 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix oob write in trace_seq_to_buffer() syzbot reported this bug: ================================================================== BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline] BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822 Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260 CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189 __asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106 trace_seq_to_buffer kernel/trace/trace.c:1830 [inline] tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822 .... ================================================================== It has been reported that trace_seq_to_buffer() tries to copy more data than PAGE_SIZE to buf. Therefore, to prevent this, we should use the smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument. | ||||
| CVE-2025-37924 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in kerberos authentication Setting sess->user = NULL was introduced to fix the dangling pointer created by ksmbd_free_user. However, it is possible another thread could be operating on the session and make use of sess->user after it has been passed to ksmbd_free_user but before sess->user is set to NULL. | ||||
| CVE-2025-37926 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in ksmbd_session_rpc_open A UAF issue can occur due to a race condition between ksmbd_session_rpc_open() and __session_rpc_close(). Add rpc_lock to the session to protect it. | ||||
| CVE-2025-37927 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid There is a string parsing logic error which can lead to an overflow of hid or uid buffers. Comparing ACPIID_LEN against a total string length doesn't take into account the lengths of individual hid and uid buffers so the check is insufficient in some cases. For example if the length of hid string is 4 and the length of the uid string is 260, the length of str will be equal to ACPIID_LEN + 1 but uid string will overflow uid buffer which size is 256. The same applies to the hid string with length 13 and uid string with length 250. Check the length of hid and uid strings separately to prevent buffer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2025-37930 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: Fix WARN_ON in nouveau_fence_context_kill() Nouveau is mostly designed in a way that it's expected that fences only ever get signaled through nouveau_fence_signal(). However, in at least one other place, nouveau_fence_done(), can signal fences, too. If that happens (race) a signaled fence remains in the pending list for a while, until it gets removed by nouveau_fence_update(). Should nouveau_fence_context_kill() run in the meantime, this would be a bug because the function would attempt to set an error code on an already signaled fence. Have nouveau_fence_context_kill() check for a fence being signaled. | ||||
| CVE-2025-37933 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 5.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: octeon_ep: Fix host hang issue during device reboot When the host loses heartbeat messages from the device, the driver calls the device-specific ndo_stop function, which frees the resources. If the driver is unloaded in this scenario, it calls ndo_stop again, attempting to free resources that have already been freed, leading to a host hang issue. To resolve this, dev_close should be called instead of the device-specific stop function.dev_close internally calls ndo_stop to stop the network interface and performs additional cleanup tasks. During the driver unload process, if the device is already down, ndo_stop is not called. | ||||
| CVE-2025-37934 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction Actually check if the passed pointers are valid, before writing to them. This also fixes a USBAN warning: UBSAN: invalid-load in ../sound/soc/fsl/imx-card.c:687:25 load of value 255 is not a valid value for type '_Bool' This is because playback_only is uninitialized and is not written to, as the playback-only property is absent. | ||||
| CVE-2025-37935 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: fix SER panic with 4GB+ RAM If the mtk_poll_rx() function detects the MTK_RESETTING flag, it will jump to release_desc and refill the high word of the SDP on the 4GB RFB. Subsequently, mtk_rx_clean will process an incorrect SDP, leading to a panic. Add patch from MediaTek's SDK to resolve this. | ||||
| CVE-2025-37936 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value. When generating the MSR_IA32_PEBS_ENABLE value that will be loaded on VM-Entry to a KVM guest, mask the value with the vCPU's desired PEBS_ENABLE value. Consulting only the host kernel's host vs. guest masks results in running the guest with PEBS enabled even when the guest doesn't want to use PEBS. Because KVM uses perf events to proxy the guest virtual PMU, simply looking at exclude_host can't differentiate between events created by host userspace, and events created by KVM on behalf of the guest. Running the guest with PEBS unexpectedly enabled typically manifests as crashes due to a near-infinite stream of #PFs. E.g. if the guest hasn't written MSR_IA32_DS_AREA, the CPU will hit page faults on address '0' when trying to record PEBS events. The issue is most easily reproduced by running `perf kvm top` from before commit 7b100989b4f6 ("perf evlist: Remove __evlist__add_default") (after which, `perf kvm top` effectively stopped using PEBS). The userspace side of perf creates a guest-only PEBS event, which intel_guest_get_msrs() misconstrues a guest-*owned* PEBS event. Arguably, this is a userspace bug, as enabling PEBS on guest-only events simply cannot work, and userspace can kill VMs in many other ways (there is no danger to the host). However, even if this is considered to be bad userspace behavior, there's zero downside to perf/KVM restricting PEBS to guest-owned events. Note, commit 854250329c02 ("KVM: x86/pmu: Disable guest PEBS temporarily in two rare situations") fixed the case where host userspace is profiling KVM *and* userspace, but missed the case where userspace is profiling only KVM. | ||||
| CVE-2025-37937 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: objtool, media: dib8000: Prevent divide-by-zero in dib8000_set_dds() If dib8000_set_dds()'s call to dib8000_read32() returns zero, the result is a divide-by-zero. Prevent that from happening. Fixes the following warning with an UBSAN kernel: drivers/media/dvb-frontends/dib8000.o: warning: objtool: dib8000_tune() falls through to next function dib8096p_cfg_DibRx() | ||||
| CVE-2025-37938 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Verify event formats that have "%*p.." The trace event verifier checks the formats of trace events to make sure that they do not point at memory that is not in the trace event itself or in data that will never be freed. If an event references data that was allocated when the event triggered and that same data is freed before the event is read, then the kernel can crash by reading freed memory. The verifier runs at boot up (or module load) and scans the print formats of the events and checks their arguments to make sure that dereferenced pointers are safe. If the format uses "%*p.." the verifier will ignore it, and that could be dangerous. Cover this case as well. Also add to the sample code a use case of "%*pbl". | ||||
| CVE-2025-37939 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: libbpf: Fix accessing BTF.ext core_relo header Update btf_ext_parse_info() to ensure the core_relo header is present before reading its fields. This avoids a potential buffer read overflow reported by the OSS Fuzz project. | ||||
| CVE-2025-37940 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Add cond_resched() to ftrace_graph_set_hash() When the kernel contains a large number of functions that can be traced, the loop in ftrace_graph_set_hash() may take a lot of time to execute. This may trigger the softlockup watchdog. Add cond_resched() within the loop to allow the kernel to remain responsive even when processing a large number of functions. This matches the cond_resched() that is used in other locations of the code that iterates over all functions that can be traced. | ||||
| CVE-2025-37941 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd937x: fix a potential memory leak in wcd937x_soc_codec_probe() When snd_soc_dapm_new_controls() or snd_soc_dapm_add_routes() fails, wcd937x_soc_codec_probe() returns without releasing 'wcd937x->clsh_info', which is allocated by wcd_clsh_ctrl_alloc. Add wcd_clsh_ctrl_free() to prevent potential memory leak. | ||||
| CVE-2025-37942 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 4.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: pidff: Make sure to fetch pool before checking SIMULTANEOUS_MAX As noted by Anssi some 20 years ago, pool report is sometimes messed up. This worked fine on many devices but casued oops on VRS DirectForce PRO. Here, we're making sure pool report is refetched before trying to access any of it's fields. While loop was replaced with a for loop + exit conditions were moved aroud to decrease the possibility of creating an infinite loop scenario. | ||||
| CVE-2025-37944 | 1 Linux | 1 Linux Kernel | 2025-06-27 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix invalid entry fetch in ath12k_dp_mon_srng_process Currently, ath12k_dp_mon_srng_process uses ath12k_hal_srng_src_get_next_entry to fetch the next entry from the destination ring. This is incorrect because ath12k_hal_srng_src_get_next_entry is intended for source rings, not destination rings. This leads to invalid entry fetches, causing potential data corruption or crashes due to accessing incorrect memory locations. This happens because the source ring and destination ring have different handling mechanisms and using the wrong function results in incorrect pointer arithmetic and ring management. To fix this issue, replace the call to ath12k_hal_srng_src_get_next_entry with ath12k_hal_srng_dst_get_next_entry in ath12k_dp_mon_srng_process. This ensures that the correct function is used for fetching entries from the destination ring, preventing invalid memory accesses. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 | ||||