| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out-of-support Control-M/Agent versions 9.0.18 to 9.0.20 (and potentially earlier unsupported versions) that are configured to use the non-default Blowfish cryptography algorithm use a hardcoded key. An attacker with access to network traffic and to this key could decrypt network traffic between the Control-M/Agent and Server. |
| A flaw was found in QEMU. An assertion failure was present in the usb_ep_get() function in hw/net/core.c when trying to get the USB endpoint from a USB device. This flaw may allow a malicious unprivileged guest user to crash the QEMU process on the host and cause a denial of service condition. |
| Stored Cross-Site Scripting (XSS) vulnerability in Energy CRM v2025 by Status Tracker Ltd, consisting of a stored XSS due to lack of proper validation of user input by sending a POST request to “/crm/create_invoice_submit.php”, using the “customerName_0” parameter. This vulnerability could allow a remote user to send a specially crafted query to an authenticated user and steal their cookie session details. |
| A vulnerability classified as critical was found in AMTT Hotel Broadband Operation System 1.0. This vulnerability affects the function popen of the file /manager/network/port_setup.php. The manipulation of the argument SwitchVersion/SwitchWrite/SwitchIP/SwitchIndex/SwitchState leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: Handle invalid decoder vsi
Handle an invalid decoder vsi in vpu_dec_init to ensure the decoder vsi
is valid for future use. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/uv: Don't call folio_wait_writeback() without a folio reference
folio_wait_writeback() requires that no spinlocks are held and that
a folio reference is held, as documented. After we dropped the PTL, the
folio could get freed concurrently. So grab a temporary reference. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/fpu: Re-add exception handling in load_fpu_state()
With the recent rewrite of the fpu code exception handling for the
lfpc instruction within load_fpu_state() was erroneously removed.
Add it again to prevent that loading invalid floating point register
values cause an unhandled specification exception. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv/purgatory: align riscv_kernel_entry
When alignment handling is delegated to the kernel, everything must be
word-aligned in purgatory, since the trap handler is then set to the
kexec one. Without the alignment, hitting the exception would
ultimately crash. On other occasions, the kernel's handler would take
care of exceptions.
This has been tested on a JH7110 SoC with oreboot and its SBI delegating
unaligned access exceptions and the kernel configured to handle them. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/surface: aggregator: Add missing call to ssam_request_sync_free()
Although rare, ssam_request_sync_init() can fail. In that case, the
request should be freed via ssam_request_sync_free(). Currently it is
leaked instead. Fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: handle 2x996 RU allocation in cfg80211_calculate_bitrate_he()
Currently NL80211_RATE_INFO_HE_RU_ALLOC_2x996 is not handled in
cfg80211_calculate_bitrate_he(), leading to below warning:
kernel: invalid HE MCS: bw:6, ru:6
kernel: WARNING: CPU: 0 PID: 2312 at net/wireless/util.c:1501 cfg80211_calculate_bitrate_he+0x22b/0x270 [cfg80211]
Fix it by handling 2x996 RU allocation in the same way as 160 MHz bandwidth. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: rcar: Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup()
Avoid large backtrace, it is sufficient to warn the user that there has
been a link problem. Either the link has failed and the system is in need
of maintenance, or the link continues to work and user has been informed.
The message from the warning can be looked up in the sources.
This makes an actual link issue less verbose.
First of all, this controller has a limitation in that the controller
driver has to assist the hardware with transition to L1 link state by
writing L1IATN to PMCTRL register, the L1 and L0 link state switching
is not fully automatic on this controller.
In case of an ASMedia ASM1062 PCIe SATA controller which does not support
ASPM, on entry to suspend or during platform pm_test, the SATA controller
enters D3hot state and the link enters L1 state. If the SATA controller
wakes up before rcar_pcie_wakeup() was called and returns to D0, the link
returns to L0 before the controller driver even started its transition to
L1 link state. At this point, the SATA controller did send an PM_ENTER_L1
DLLP to the PCIe controller and the PCIe controller received it, and the
PCIe controller did set PMSR PMEL1RX bit.
Once rcar_pcie_wakeup() is called, if the link is already back in L0 state
and PMEL1RX bit is set, the controller driver has no way to determine if
it should perform the link transition to L1 state, or treat the link as if
it is in L0 state. Currently the driver attempts to perform the transition
to L1 link state unconditionally, which in this specific case fails with a
PMSR L1FAEG poll timeout, however the link still works as it is already
back in L0 state.
Reduce this warning verbosity. In case the link is really broken, the
rcar_pcie_config_access() would fail, otherwise it will succeed and any
system with this controller and ASM1062 can suspend without generating
a backtrace. |
| Inclusion of Functionality from Untrusted Control Sphere vulnerability in HCL MyXalytics. v6.6
allows Loading third-party scripts without integrity checks or validation can allow external code run in the application's context, risking data exposure. |
| Stored Cross-Site Scripting (XSS) in Xibo Signage's Xibo CMS v4.1.2, due to a lack of proper validation of user input. To exploit the vulnerability, the attacker must create a template in the 'Templates' section, then add a text element in the 'Global Elements' section, and finally modify the 'Text' field in the section with the malicious payload. |
| Reflected Cross-Site Scripting (XSS) in Xibo CMS v4.1.2 from Xibo Signage, due to a lack of proper validation of user input. To exploit the vulnerability, the attacker must create a template in the 'Templates' section, then add an element that has the 'Configuration Name' field, such as the 'Clock' widget. Next, modify the 'Configuration Name' field in the left-hand section. |
| Inline script execution allowed in CSP vulnerability has been identified in HCL AION v2.0 |
| Cross-site scripting (XSS) vulnerability in workflow process builder in Liferay Portal 7.4.3.21 through 7.4.3.111, and Liferay DXP 2023.Q4.0 through 2023.Q4.5, 2023.Q3.1 through 2023.Q3.8, and 7.4 update 21 through update 92 allows remote authenticated attackers to inject arbitrary web script or HTML via the crafted input in a workflow definition. |
| Stored cross-site scripting (XSS) vulnerability on the Membership page in Account Settings in Liferay Portal 7.4.3.21 through 7.4.3.111, and Liferay DXP 2023.Q4.0 through 2023.Q4.5, 2023.Q3.1 through 2023.Q3.8, and 7.4 update 21 through update 92 allows remote authenticated attackers to inject arbitrary web script or HTML via a crafted payload injected into a Account's “Name“ text field. |
| Stored cross-site scripting (XSS) vulnerability in Commerce’s view order page in Liferay Portal 7.4.3.8 through 7.4.3.111, and Liferay DXP 2023.Q4.0 through 2023.Q4.5, 2023.Q3.1 through 2023.Q3.8, and 7.4 update 8 through update 92 allows remote attackers to inject arbitrary web script or HTML via a crafted payload injected into an Account’s “Name” text field. |
| A flaw was found in the libssh implements abstract layer for message digest (MD) operations implemented by different supported crypto backends. The return values from these were not properly checked, which could cause low-memory situations failures, NULL dereferences, crashes, or usage of the uninitialized memory as an input for the KDF. In this case, non-matching keys will result in decryption/integrity failures, terminating the connection. |
| An out-of-bounds read vulnerability exists in VS6ComFile!load_link_inf of V-SFT v6.2.7.0 and earlier. Opening specially crafted V-SFT files may lead to information disclosure, affected system's abnormal end (ABEND), and arbitrary code execution. |
