| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue was discovered in the events2 (aka Events 2) extension before 8.3.8 and 9.x before 9.0.6 for TYPO3. Missing access checks in the management plugin lead to an insecure direct object reference (IDOR) vulnerability with the potential to activate or delete various events for unauthenticated users. |
| Multiple Cisco products are affected by a vulnerability in the Snort detection engine that could allow an unauthenticated, remote attacker to bypass a configured file policy for HTTP.
The vulnerability is due to incorrect handling of specific HTTP header parameters. An attacker could exploit this vulnerability by sending crafted HTTP packets through an affected device. A successful exploit could allow the attacker to bypass a configured file policy for HTTP packets and deliver a malicious payload. |
| A vulnerability has been found in Union Bank of India Vyom 8.0.34 on Android and classified as problematic. This vulnerability affects unknown code of the component Rooting Detection. The manipulation leads to protection mechanism failure. The attack needs to be approached locally. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Protection mechanism failure in the SPP for some Intel(R) Processors may allow an authenticated user to potentially enable escalation of privilege via local access. |
| EDK2 contains a vulnerability in BIOS where an attacker may cause “Protection Mechanism Failure” by local access. Successful exploitation of this vulnerability will lead to arbitrary code execution and impact Confidentiality, Integrity, and Availability. |
| Protection mechanism failure for some Edge Orchestrator software for Intel(R) Tiber™ Edge Platform may allow an authenticated user to potentially enable escalation of privilege via local access. |
| A vulnerability has been identified in RUGGEDCOM RMC8388 V5.X (All versions < V5.10.0), RUGGEDCOM RMC8388NC V5.X (All versions < V5.10.0), RUGGEDCOM RS416NCv2 V5.X (All versions < V5.10.0), RUGGEDCOM RS416PNCv2 V5.X (All versions < V5.10.0), RUGGEDCOM RS416Pv2 V5.X (All versions < V5.10.0), RUGGEDCOM RS416v2 V5.X (All versions < V5.10.0), RUGGEDCOM RS900 (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900G (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900GNC(32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900NC(32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2100 (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2100NC(32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2100P (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2100PNC (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2288 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2288NC V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300NC V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300P V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300PNC V5.X (All versions < V5.10.0), RUGGEDCOM RSG2488 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2488NC V5.X (All versions < V5.10.0), RUGGEDCOM RSG907R (All versions < V5.10.0), RUGGEDCOM RSG908C (All versions < V5.10.0), RUGGEDCOM RSG909R (All versions < V5.10.0), RUGGEDCOM RSG910C (All versions < V5.10.0), RUGGEDCOM RSG920P V5.X (All versions < V5.10.0), RUGGEDCOM RSG920PNC V5.X (All versions < V5.10.0), RUGGEDCOM RSL910 (All versions < V5.10.0), RUGGEDCOM RSL910NC (All versions < V5.10.0), RUGGEDCOM RST2228 (All versions < V5.10.0), RUGGEDCOM RST2228P (All versions < V5.10.0), RUGGEDCOM RST916C (All versions < V5.10.0), RUGGEDCOM RST916P (All versions < V5.10.0). The affected products do not properly enforce interface access restrictions when changing from management to non-management interface configurations until a system reboot occurs, despite configuration being saved. This could allow an attacker with network access and credentials to gain access to device through non-management and maintain SSH access to the device until reboot. |
| In CARLA through 0.9.15.2, the collision sensor mishandles some situations involving pedestrians or bicycles, in part because the collision sensor function is not exposed to the Blueprint library. |
| Emerson ValveLink products
do not use or incorrectly uses a protection mechanism that provides
sufficient defense against directed attacks against the product. |
| The Microsoft vulnerable driver block list is implemented as Windows Defender Application Control (WDAC) policy. Entries that specify only the to-be-signed (TBS) part of the code signer certificate are properly blocked, but entries that specify the signing certificate's TBS hash along with a 'FileAttribRef' qualifier (such as file name or version) may not be blocked, whether hypervisor-protected code integrity (HVCI) is enabled or not. NOTE: The vendor disputes this CVE ID assignment and states that the driver blocklist is intended for use with HVCI. |
| A "Privilege boundary violation" vulnerability is identified affecting multiple Radiometer Products. Exploitation of this vulnerability gives a user with physical access to the analyzer, the possibility to gain unauthorized access to functionalities outside the restricted environment. The vulnerability is due to weakness in the design of access control implementation in application software.
Other related CVE's are CVE-2025-14096 & CVE-2025-14097.
Affected customers have been informed about this vulnerability. This CVE is being published to provide transparency.
Required configuration for Exposure:
Physical access to the analyzer is needed.
Temporary work Around:
Only authorized people can physically access the analyzer.
Permanent solution:
Local Radiometer representatives will contact all affected customers to discuss a permanent solution.
Exploit Status:
Researchers have provided working proof-of-concept. Radiometer is not aware of any publicly available exploit at the time of publication. Note:
CVSS score 6.8 when underlying OS is Windows 7 or Windows XP Operating systems and CVSS score 5.7 when underlying OS is Windows 8 or Windows 10 operating systems. |
| Protection mechanism failure in the UEFI firmware for the Slim Bootloader within firmware may allow an escalation of privilege. Startup code and smm adversary with a privileged user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Protection mechanism failure in some 3rd and 4th Generation Intel(R) Xeon(R) Processors when using Intel(R) SGX or Intel(R) TDX may allow a privileged user to potentially enable escalation of privilege via local access. |
| Business::OnlinePayment::StoredTransaction versions through 0.01 for Perl uses an insecure secret key.
Business::OnlinePayment::StoredTransaction generates a secret key by using a MD5 hash of a single call to the built-in rand function, which is unsuitable for cryptographic use.
This key is intended for encrypting credit card transaction data. |
| Policy bypass in Downloads in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to bypass of multi-download protections via a crafted HTML page. (Chromium security severity: Low) |
| Policy bypass in IFrameSandbox in Google Chrome prior to 147.0.7727.55 allowed a remote attacker who convinced a user to engage in specific UI gestures to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Low) |
| SandboxJS is a JavaScript sandboxing library. Prior to 0.8.36, SandboxJS blocks direct assignment to global objects (for example Math.random = ...), but this protection can be bypassed through an exposed callable constructor path: this.constructor.call(target, attackerObject). Because this.constructor resolves to the internal SandboxGlobal function and Function.prototype.call is allowed, attacker code can write arbitrary properties into host global objects and persist those mutations across sandbox instances in the same process. This vulnerability is fixed in 0.8.36. |
| The Page Restriction WordPress (WP) – Protect WP Pages/Post plugin for WordPress is vulnerable to information disclosure in all versions up to, and including, 1.3.4. This is due to the plugin not properly restricting access to pages via the REST API when a page has been made private. This makes it possible for unauthenticated attackers to view protected pages. The vendor has decided that they will not implement REST API protection on posts and pages and the restrictions will only apply to the front-end of the site. The vendors solution was to add notices throughout the dashboard and recommends installing the WordPress REST API Authentication plugin for REST API coverage. |
| The Page Restrict plugin for WordPress is vulnerable to information disclosure in all versions up to, and including, 2.5.5. This is due to the plugin not properly restricting access to posts via the REST API when a page has been made private. This makes it possible for unauthenticated attackers to view protected posts. |
| The WP Private Content Plus plugin for WordPress is vulnerable to information disclosure in all versions up to, and including, 3.6. This is due to the plugin not properly restricting access to posts via the REST API when a page has been made private. This makes it possible for unauthenticated attackers to view protected posts. |
