| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The OpenFeature feature toggle evaluation endpoint reads unbounded values into memory, which can cause out-of-memory crashes. |
| A resample query can be used to trigger out-of-memory crashes in Grafana. |
| In the Linux kernel, the following vulnerability has been resolved:
xdp: produce a warning when calculated tailroom is negative
Many ethernet drivers report xdp Rx queue frag size as being the same as
DMA write size. However, the only user of this field, namely
bpf_xdp_frags_increase_tail(), clearly expects a truesize.
Such difference leads to unspecific memory corruption issues under certain
circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when
running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses
all DMA-writable space in 2 buffers. This would be fine, if only
rxq->frag_size was properly set to 4K, but value of 3K results in a
negative tailroom, because there is a non-zero page offset.
We are supposed to return -EINVAL and be done with it in such case, but due
to tailroom being stored as an unsigned int, it is reported to be somewhere
near UINT_MAX, resulting in a tail being grown, even if the requested
offset is too much (it is around 2K in the abovementioned test). This later
leads to all kinds of unspecific calltraces.
[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6
[ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4
[ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000]
[ 7340.339230] in xskxceiver[42b5,400000+69000]
[ 7340.340300] likely on CPU 6 (core 0, socket 6)
[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe
[ 7340.340888] likely on CPU 3 (core 0, socket 3)
[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7
[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI
[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)
[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80
[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89
[ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202
[ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010
[ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff
[ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0
[ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0
[ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500
[ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000
[ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0
[ 7340.421237] PKRU: 55555554
[ 7340.421623] Call Trace:
[ 7340.421987] <TASK>
[ 7340.422309] ? softleaf_from_pte+0x77/0xa0
[ 7340.422855] swap_pte_batch+0xa7/0x290
[ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270
[ 7340.424102] zap_pte_range+0x281/0x580
[ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240
[ 7340.425177] unmap_page_range+0x24d/0x420
[ 7340.425714] unmap_vmas+0xa1/0x180
[ 7340.426185] exit_mmap+0xe1/0x3b0
[ 7340.426644] __mmput+0x41/0x150
[ 7340.427098] exit_mm+0xb1/0x110
[ 7340.427539] do_exit+0x1b2/0x460
[ 7340.427992] do_group_exit+0x2d/0xc0
[ 7340.428477] get_signal+0x79d/0x7e0
[ 7340.428957] arch_do_signal_or_restart+0x34/0x100
[ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0
[ 7340.430159] do_syscall_64+0x188/
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Fix fragment node deletion to prevent buffer leak
After commit b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node"),
the list_node field is reused for both the xskb pool list and the buffer
free list, this causes a buffer leak as described below.
xp_free() checks if a buffer is already on the free list using
list_empty(&xskb->list_node). When list_del() is used to remove a node
from the xskb pool list, it doesn't reinitialize the node pointers.
This means list_empty() will return false even after the node has been
removed, causing xp_free() to incorrectly skip adding the buffer to the
free list.
Fix this by using list_del_init() instead of list_del() in all fragment
handling paths, this ensures the list node is reinitialized after removal,
allowing the list_empty() to work correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: Fix possible oob access in mt76_connac2_mac_write_txwi_80211()
Check frame length before accessing the mgmt fields in
mt76_connac2_mac_write_txwi_80211 in order to avoid a possible oob
access.
[fix check to also cover mgmt->u.action.u.addba_req.capab,
correct Fixes tag] |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (macsmc) Fix regressions in Apple Silicon SMC hwmon driver
The recently added macsmc-hwmon driver contained several critical
bugs in its sensor population logic and float conversion routines.
Specifically:
- The voltage sensor population loop used the wrong prefix ("volt-"
instead of "voltage-") and incorrectly assigned sensors to the
temperature sensor array (hwmon->temp.sensors) instead of the
voltage sensor array (hwmon->volt.sensors). This would lead to
out-of-bounds memory access or data corruption when both temperature
and voltage sensors were present.
- The float conversion in macsmc_hwmon_write_f32() had flawed exponent
logic for values >= 2^24 and lacked masking for the mantissa, which
could lead to incorrect values being written to the SMC.
Fix these issues to ensure correct sensor registration and reliable
manual fan control.
Confirm that the reported overflow in FIELD_PREP is fixed by declaring
macsmc_hwmon_write_f32() as __always_inline for a compile test. |
| A heap buffer overflow in the av_bprint_finalize() function of FFmpeg v8.0.1 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| Flowsint is an open-source OSINT graph exploration tool designed for cybersecurity investigation, transparency, and verification. Flowsint allows a user to create investigations, which are used to manage sketches and analyses. Sketches have controllable graphs, which are comprised of nodes and relationships. The sketches contain information on an OSINT target (usernames, websites, etc) within these nodes and relationships. The nodes can have automated processes execute on them called 'transformers'. A remote attacker can create a sketch, then trigger the 'org_to_asn' transform on an organization node to execute arbitrary OS commands as root on the host machine via shell metacharacters and a docker container escape. Commit b52cbbb904c8013b74308d58af88bc7dbb1b055c appears to remove the code that causes this issue. |
| A heap buffer overflow vulnerability exists in the Netwide Assembler (NASM) due to a lack of bounds checking in the obj_directive() function. This vulnerability can be exploited by a user assembling a malicious .asm file, potentially leading to heap memory corruption, denial of service (crash), and arbitrary code execution. |
| zrok is software for sharing web services, files, and network resources. Prior to version 2.0.1, endpoints.GetSessionCookie parses an attacker-supplied cookie chunk count and calls make([]string, count) with no upper bound before any token validation occurs. The function is reached on every request to an OAuth-protected proxy share, allowing an unauthenticated remote attacker to trigger gigabyte-scale heap allocations per request, leading to process-level OOM termination or repeated goroutine panics. Both publicProxy and dynamicProxy are affected. Version 2.0.1 patches the issue. |
| Podman is a tool for managing OCI containers and pods. Versions 4.8.0 through 5.8.1 contain a command injection vulnerability in the HyperV machine backend in pkg/machine/hyperv/stubber.go, where the VM image path is inserted into a PowerShell double-quoted string without sanitization, allowing $() subexpression injection. Because PowerShell evaluates subexpressions inside double-quoted strings before executing the outer command, an attacker who can control the VM image path through a crafted machine name or image directory can execute arbitrary PowerShell commands with the privileges of the Podman process. On typical Windows installations this means SYSTEM-level code execution, and only Windows is affected as the code is exclusive to the HyperV backend. This issue has been patched in version 5.8.2. |
| FreePBX api module version 17.0.8 and prior contain a command injection vulnerability in the initiateGqlAPIProcess() function where GraphQL mutation input fields are passed directly to shell_exec() without sanitization or escaping. An authenticated user with a valid bearer token can send a GraphQL moduleOperations mutation with backtick-wrapped commands in the module field to execute arbitrary commands on the underlying host as the web server user. |
| In the Website module of Dolibarr ERP & CRM 22.0.4 and below, the application uses blacklist-based filtering to restrict dangerous PHP functions related to system command execution. An authenticated user with permission to edit PHP content can bypass this filtering, resulting in full remote code execution with the ability to execute arbitrary operating system commands on the server. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.0, due to unsafe serialization of stdio commands in the MCP adapter, an authenticated attacker can add an MCP stdio server with an arbitrary command, achieving command execution. The vulnerability lies in a bug in the input sanitization from the “Custom MCP” configuration in http://localhost:3000/canvas - where any user can add a new MCP, when doing so - adding a new MCP using stdio, the user can add any command, even though your code have input sanitization checks such as validateCommandInjection and validateArgsForLocalFileAccess, and a list of predefined specific safe commands - these commands, for example "npx" can be combined with code execution arguments ("-c touch /tmp/pwn") that enable direct code execution on the underlying OS. This vulnerability is fixed in 3.1.0. |
| Issue summary: Converting an excessively large OCTET STRING value to
a hexadecimal string leads to a heap buffer overflow on 32 bit platforms.
Impact summary: A heap buffer overflow may lead to a crash or possibly
an attacker controlled code execution or other undefined behavior.
If an attacker can supply a crafted X.509 certificate with an excessively
large OCTET STRING value in extensions such as the Subject Key Identifier
(SKID) or Authority Key Identifier (AKID) which are being converted to hex,
the size of the buffer needed for the result is calculated as multiplication
of the input length by 3. On 32 bit platforms, this multiplication may overflow
resulting in the allocation of a smaller buffer and a heap buffer overflow.
Applications and services that print or log contents of untrusted X.509
certificates are vulnerable to this issue. As the certificates would have
to have sizes of over 1 Gigabyte, printing or logging such certificates
is a fairly unlikely operation and only 32 bit platforms are affected,
this issue was assigned Low severity.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this
issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| Calling the scanf family of functions with a %mc (malloc'd character match) in the GNU C Library version 2.7 to version 2.43 with a format width specifier with an explicit width greater than 1024 could result in a one byte heap buffer overflow. |
| Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in David Lingren Media LIbrary Assistant media-library-assistant allows Command Injection.This issue affects Media LIbrary Assistant: from n/a through <= 3.19. |
| Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Ninja Team Click to Chat – WP Support All-in-One Floating Widget support-chat allows Stored XSS.This issue affects Click to Chat – WP Support All-in-One Floating Widget: from n/a through <= 2.3.3. |
| Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.5, LTS2025 release version 8.3.1.0 through 8.3.1.10, LTS2024 release versions 7.13.1.0 through 7.13.1.40, contain an OS command injection vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution. |
| This Critical severity OS Command Injection vulnerability was introduced in versions 9.6.0, 10.0.0, 10.1.0, 10.2.0,
11.0.0, 11.1.0, 12.0.0, and 12.1.0 of Bamboo Data Center.
This RCE (Remote Code Execution) vulnerability, with a CVSS Score of 9.4 and a CVSS Vector of
CVSS:4.0/AV:N/AC:L/AT:N/PR:L/UI:N/VC:H/VI:H/VA:H/SC:H/SI:H/SA:H allows an authenticated attacker to execute commands
on the remote system, which has high impact to confidentiality, high impact to integrity, high impact to availability,
and requires no user interaction.
Atlassian recommends that Bamboo Data Center customers upgrade to latest version, if you are unable to do so, upgrade
your instance to one of the specified supported fixed versions:
Bamboo Data Center 9.6.0: Upgrade to a release greater than or equal to 9.6.25
Bamboo Data Center 10.2: Upgrade to a release greater than or equal to 10.2.18
Bamboo Data Center 12.1: Upgrade to a release greater than or equal to 12.1.6
See the release notes ([https://confluence.atlassian.com/bambooreleases/bamboo-release-notes-1189793869.html]). You can download the latest version of Bamboo Data Center from the download center ([https://www.atlassian.com/software/bamboo/download-archives]). |
