| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: devicetree: don't free uninitialized dev_name on error path
dt_remember_or_free_map() duplicates dev_name for each map entry. If
kstrdup_const() fails, dt_free_map() frees dev_name in all num_maps
entries, including entries that have not been initialized.
Some pinctrl drivers, including pinctrl-imx, allocate the map with
kmalloc() and leave dev_name for the core to initialize. The untouched
entries therefore contain uninitialized data which is passed to
kfree_const().
Reproduced on qemu's mcimx6ul-evk (pinctrl-imx) with failslab injection
while binding the pinctrl-consuming device, under KASAN:
BUG: KASAN: double-free in dt_free_map+0x34/0xa4
Free of addr c425a900 by task init/1
kfree from dt_free_map+0x34/0xa4
dt_free_map from dt_remember_or_free_map+0x184/0x198
dt_remember_or_free_map from pinctrl_dt_to_map+0x33c/0x4c8
pinctrl_dt_to_map from create_pinctrl+0x9c/0x5c0
Initialize all dev_name fields to NULL before duplicating the device
name, making the full-map cleanup safe after a partial failure. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix list corruption in allocate_file_region_entries()
allocate_file_region_entries() tops up resv->region_cache with freshly
allocated file_region descriptors. The allocation uses GFP_KERNEL, so
resv->lock is dropped around it: the new entries are gathered on a
stack-local list head, allocated_regions, and spliced into
resv->region_cache once the lock is re-acquired.
The splice used list_splice(), which moves the entries but does not
re-initialize the source head, so allocated_regions is left pointing at an
entry that now lives on resv->region_cache. The top-up runs in a while
loop that re-checks the cache deficit after re-acquiring the lock. For a
shared mapping the resv_map is shared by every mapper of the hugetlbfs
inode, so a concurrent region_chg()/region_add()/region_del() on the same
resv_map can consume cache entries during the unlocked window and force a
second iteration. That iteration calls list_add() on the stale head and
corrupts the list; with CONFIG_DEBUG_LIST the __list_add_valid() check
trips:
list_add corruption. next->prev should be prev (ffffc900011ff7f8),
but was ffff88814c281460. (next=ffff88814c545640).
kernel BUG at lib/list_debug.c:31!
allocate_file_region_entries+0x191/0x420
region_chg+0x267/0x300
hugetlb_reserve_pages+0x387/0xc80
hugetlbfs_file_mmap+0x2ce/0x3f0
mmap_region+0x1348/0x1a80
do_mmap+0x85e/0xb90
vm_mmap_pgoff+0x18c/0x330
ksys_mmap_pgoff+0x2a1/0x3e0
do_syscall_64+0xd7/0x420
Without CONFIG_DEBUG_LIST the bad list_add() silently links a kernel-stack
address into resv->region_cache, leading to later use-after-free.
This was observed as a real host panic on a dense KVM host where a QEMU
guest-RAM hugetlbfs file was mapped MAP_SHARED by both QEMU and a separate
SPDK/DPDK vhost-user target, generating concurrent region_* traffic on one
shared resv_map.
Use list_splice_init() so the source head is re-initialized empty after
each splice, making the retry loop safe. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Update x2APIC MSR intercepts if AVIC is inhibited while L2 is active
Always update x2APIC MSR intercepts for L1 when AVIC is deactivated, even
if L2 is active and KVM is using a separate MSR bitmap to run L2. If AVIC
is fully enabled prior to running L2, and is then inhibited while L2 is
active (for a VM-scoped inhibit), then KVM will run L1 with AVIC disabled,
but with x2APIC MSR intercepts disabled, i.e. will allow L1 to read most of
the host's APIC state, send arbitrary interrupts, change task priority, and
ultimately trivially DoS the host.
E.g. sending a self-IPI in L1 on HYPERV_REENLIGHTENMENT_VECTOR, 0xee, with
CONFIG_HYPERV=n in the host kernel as a "safe" PoC, yields:
Spurious interrupt (vector 0xee) on CPU#425. Acked
And hacking KVM to abuse kvm_set_posted_intr_wakeup_handler() to register a
handler and WARN on POSTED_INTR_WAKEUP_VECTOR yields:
------------[ cut here ]------------
WARNING: arch/x86/kvm/svm/svm.c:5594 at pi_wakeup_handler+0x9/0x10 [kvm_amd], CPU#156: nested_x2apic_t/316940
CPU: 156 UID: 0 PID: 316940 Comm: nested_x2apic_t Tainted: G S U
Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
Hardware name: Google Astoria-Turin/astoria, BIOS 0.20260209.0-0 02/09/2026
RIP: 0010:pi_wakeup_handler+0x9/0x10 [kvm_amd]
Call Trace:
<IRQ>
sysvec_kvm_posted_intr_wakeup_ipi+0x64/0x80
</IRQ>
<TASK>
asm_sysvec_kvm_posted_intr_wakeup_ipi+0x1a/0x20
RIP: 0010:vcpu_run+0x1430/0x1e40 [kvm]
kvm_arch_vcpu_ioctl_run+0x2c1/0x600 [kvm]
kvm_vcpu_ioctl+0x580/0x6b0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x46ff4b
</TASK>
---[ end trace 0000000000000000 ]--- |
| Integer overflow in the Graphics component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HIDP: reject frames without a transaction header
hidp_recv_ctrl_frame() and hidp_recv_intr_frame() read skb->data[0]
before checking that the L2CAP SDU contains a transaction header. A
connected HIDP peer can send an empty basic-mode SDU and make both paths
use an uninitialized byte from skb tailroom.
KMSAN reports the use in hidp_session_run(), with the uninitialized value
originating in __alloc_skb() through vhci_write(). The control path
produces two reports and the interrupt path produces one.
The byte can also be controlled by a malformed lower-layer packet. If an
HCI ACL packet contains an L2CAP PDU with a declared zero-length payload
followed by an extra 0x15 byte, l2cap_recv_acldata() reduces skb->len to
the declared PDU length before dispatch. The current HIDP path nevertheless
consumes the extra byte as HIDP_TRANS_HID_CONTROL |
HIDP_CTRL_VIRTUAL_CABLE_UNPLUG and terminates the HIDP session. With this
change, the same packet is discarded and a subsequent feature report
request succeeds.
Pull the transaction header with skb_pull_data() and discard frames that
do not contain it. |
| Site isolation issue in the Networking: Cookies component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix OOB write in snd_usbmidi_akai_output()
snd_usbmidi_akai_output() computes its fill-loop bound
buf_end = ep->max_transfer - MAX_AKAI_SYSEX_LEN - 1;
as a signed int, so a small device-advertised bulk-OUT max_transfer
makes buf_end negative. The loop guard then compares the u32
urb->transfer_buffer_length against that negative int: the usual
arithmetic conversion turns buf_end into a large unsigned value, so the
guard stays true and each iteration keeps appending SysEx framing and
payload bytes past the end of the URB transfer buffer, which is only
max_transfer bytes long.
A USB device that advertises a tiny bulk-OUT endpoint can therefore
trigger an attacker-length- and content-controlled heap out-of-bounds
write when a process writes to the created /dev/snd/midiC*D* node.
Return early when there is no room for even one SysEx, so the loop is
never entered with a bound that would wrap. The loop is the last
statement of the function, so bailing out is equivalent to it not
running.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| Privilege escalation in the Networking: Cookies component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Privilege escalation due to use-after-free in the Graphics: Canvas2D component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Privilege escalation in the Graphics: CanvasWebGL component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to gain elevated privileges due to improper validation of pointers read from Java-controlled addresses. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: use neigh_ha_snapshot() in route_shortcircuit()
The neighbour hardware address n->ha can be updated asynchronously by the
neighbour subsystem, protected by n->ha_lock seqlock. Reading n->ha without
holding the seqlock loop can lead to torn reads or reading a partially updated
MAC address.
Use neigh_ha_snapshot() in route_shortcircuit() to safely copy n->ha under
read_seqbegin()/read_seqretry() lock protection before using it.
Note that arp_reduce() and neigh_reduce() seem to have the same issue
left for future patches. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Check return value of __register_event() in trace_module_add_events()
trace_module_add_events() ignores the return value of __register_event()
and unconditionally calls __add_event_to_tracers() for each event.
If __register_event() fails (for example, if event_init() fails), the
trace_event_call is not added to ftrace_events list, but
__add_event_to_tracers() still creates a trace_event_file pointing to it.
If module loading subsequently fails and module memory is freed, tracing
state retains a stale trace_event_call pointer in trace_event_file,
leading to a use-after-free when tracefs or tracing subsystem operations
are later executed.
Fix this by checking the return value of __register_event() and only
calling __add_event_to_tracers() if event registration succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_debug: Fix REPORT ZONES alloc_len underflow OOB write
resp_report_zones() sizes the reply buffer from the CDB allocation
length. The v3 fix rounds alloc_len up with ALIGN() before deriving the
descriptor count:
rep_max_zones = (ALIGN((u64)alloc_len, RZONES_DESC_HD) -
RZONES_DESC_HD) >> ilog2(RZONES_DESC_HD);
arr_len = (u64)RZONES_DESC_HD * (rep_max_zones + 1);
For alloc_len in 0xFFFFFFC1..0xFFFFFFFF, ALIGN() rounds up to
0x100000000, so arr_len is 4 GB. On 32-bit, kzalloc()'s size_t is 32-bit
and truncates 0x100000000 to 0; kzalloc(0) returns ZERO_SIZE_PTR, which
passes the !arr check, and desc = arr + 64 is then dereferenced in the
loop -> out-of-bounds write / panic.
Clamp rep_max_zones to devip->nr_zones. The loop already stops at
sdebug_capacity (after nr_zones zones), so a report can never hold more
than nr_zones descriptors; the clamp does not change the report, it only
bounds arr_len to (nr_zones + 1) * RZONES_DESC_HD, a real device
property that can never reach 0x100000000. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix skb leak on flow key update failure during ct
ovs_ct_execute() always steals or frees the skb on failure while
ovs_flow_key_update() does not. So, if it fails and we return right
away, the skb ends up leaked.
Fix that by breaking instead and letting the common error handling
code at the bottom of the loop to free the skb properly.
This is a very unlikely scenario as it requires the packet to become
unparseable by applying a set of actions on a previously parseable skb,
but should be fixed nevertheless.
Reported by Sashiko. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to bypass security restrictions due to improper validation of user-controlled addresses. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: jz4780: Cache host clock rate at probe to prevent CCF prepare_lock deadlock
Fix a severe AB/BA deadlock between the Common Clock Framework (CCF)
and the I2C adapter lock, which triggers when an I2C-controlled clock
generator client (like the Si5351) is registered or modified under the CCF.
During an i2c client clock (generator) frequency change, the CCF acquires its global
'prepare_lock' mutex and the driver calls i2c_transfer() to update the client's
chip registers, stalling for the adapter's I2C bus lock.
Concurrently, an independent, parallel transfer on the same bus (e.g., a GPIO
expander handling LEDs) can hold the I2C adapter lock. Inside this parallel
transfer path, jz4780_i2c_set_speed() calls clk_get_rate() on the host
controller's input clock to calculate bus timings. This call attempts to acquire
the blocked CCF 'prepare_lock', creating a circular dependency that freezes
the system.
The jz4780 host controller clock itself is static and never changes at runtime.
However, calling clk_get_rate() inside the active transfer path introduces
an unnecessary dependency on the CCF internal locks.
Eliminate this synchronous clk_get_rate() call from the active transfer
path by caching the static host peripheral clock rate once - inside the private
jz4780_i2c structure during jz4780_i2c_probe(). Update jz4780_i2c_set_speed()
to use this cached value, safely decoupling active I2C transactions from the
CCF internal locks without any risk of stale timings.
Assisted-by web based Google AI (pinpointing the bug and writing the message). |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to an improper buffer write. |
| In the Linux kernel, the following vulnerability has been resolved:
can: peak_usb: add bounds check for USB channel index
The channel control index ctrl_idx is derived from rx->len which comes
directly from a device USB payload. The mask 0x0f allows values 0-15, but
the array size of usb_if->dev[] is only 2. Values 2-15 cause heap
out-of-bounds read, eventually causing kernel panic in the IRQ context.
Add bounds checking for ctrl_idx before the array access in both
pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error(). |
| In the Linux kernel, the following vulnerability has been resolved:
can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error
In peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc()
and the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also
frees the transfer buffer.
If usb_submit_urb() fails, the error path frees the buffer explicitly with
kfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set,
usb_free_urb() -> urb_destroy() frees the same buffer a second time, a double
free of the transfer buffer.
BUG: KASAN: double-free in usb_free_urb.part.0+0x91/0xb0
Free of addr ffff8881069ccb80 by task trigger.sh/285
Call Trace:
kfree+0x113/0x3c0
usb_free_urb.part.0+0x91/0xb0
Drop the redundant kfree(buf); usb_free_urb() already releases the transfer
buffer. This mirrors commit 03819abbeb11 ("net: usb: lan78xx: Fix double free
issue with interrupt buffer allocation"). |
