Filtered by vendor Linux
Subscriptions
Total
12942 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-37969 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: fix possible lockup in st_lsm6dsx_read_tagged_fifo Prevent st_lsm6dsx_read_tagged_fifo from falling in an infinite loop in case pattern_len is equal to zero and the device FIFO is not empty. | ||||
| CVE-2025-37970 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: fix possible lockup in st_lsm6dsx_read_fifo Prevent st_lsm6dsx_read_fifo from falling in an infinite loop in case pattern_len is equal to zero and the device FIFO is not empty. | ||||
| CVE-2025-37971 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: bcm2835-camera: Initialise dev in v4l2_dev Commit 42a2f6664e18 ("staging: vc04_services: Move global g_state to vchiq_state") changed mmal_init to pass dev->v4l2_dev.dev to vchiq_mmal_init, however nothing iniitialised dev->v4l2_dev, so we got a NULL pointer dereference. Set dev->v4l2_dev.dev during bcm2835_mmal_probe. The device pointer could be passed into v4l2_device_register to set it, however that also has other effects that would need additional changes. | ||||
| CVE-2025-37972 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: mtk-pmic-keys - fix possible null pointer dereference In mtk_pmic_keys_probe, the regs parameter is only set if the button is parsed in the device tree. However, on hardware where the button is left floating, that node will most likely be removed not to enable that input. In that case the code will try to dereference a null pointer. Let's use the regs struct instead as it is defined for all supported platforms. Note that it is ok setting the key reg even if that latter is disabled as the interrupt won't be enabled anyway. | ||||
| CVE-2025-37974 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 6.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix missing check for zpci_create_device() error return The zpci_create_device() function returns an error pointer that needs to be checked before dereferencing it as a struct zpci_dev pointer. Add the missing check in __clp_add() where it was missed when adding the scan_list in the fixed commit. Simply not adding the device to the scan list results in the previous behavior. | ||||
| CVE-2025-37975 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: module: Fix out-of-bounds relocation access The current code allows rel[j] to access one element past the end of the relocation section. Simplify to num_relocations which is equivalent to the existing size expression. | ||||
| CVE-2025-37977 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: exynos: Disable iocc if dma-coherent property isn't set If dma-coherent property isn't set then descriptors are non-cacheable and the iocc shareability bits should be disabled. Without this UFS can end up in an incompatible configuration and suffer from random cache related stability issues. | ||||
| CVE-2025-37978 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: integrity: Do not call set_page_dirty_lock() Placing multiple protection information buffers inside the same page can lead to oopses because set_page_dirty_lock() can't be called from interrupt context. Since a protection information buffer is not backed by a file there is no point in setting its page dirty, there is nothing to synchronize. Drop the call to set_page_dirty_lock() and remove the last argument to bio_integrity_unpin_bvec(). | ||||
| CVE-2025-37979 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Fix sc7280 lpass potential buffer overflow Case values introduced in commit 5f78e1fb7a3e ("ASoC: qcom: Add driver support for audioreach solution") cause out of bounds access in arrays of sc7280 driver data (e.g. in case of RX_CODEC_DMA_RX_0 in sc7280_snd_hw_params()). Redefine LPASS_MAX_PORTS to consider the maximum possible port id for q6dsp as sc7280 driver utilizes some of those values. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2025-37980 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: fix resource leak in blk_register_queue() error path When registering a queue fails after blk_mq_sysfs_register() is successful but the function later encounters an error, we need to clean up the blk_mq_sysfs resources. Add the missing blk_mq_sysfs_unregister() call in the error path to properly clean up these resources and prevent a memory leak. | ||||
| CVE-2025-37981 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: smartpqi: Use is_kdump_kernel() to check for kdump The smartpqi driver checks the reset_devices variable to determine whether special adjustments need to be made for kdump. This has the effect that after a regular kexec reboot, some driver parameters such as max_transfer_size are much lower than usual. More importantly, kexec reboot tests have revealed memory corruption caused by the driver log being written to system memory after a kexec. Fix this by testing is_kdump_kernel() rather than reset_devices where appropriate. | ||||
| CVE-2025-37982 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wl1251: fix memory leak in wl1251_tx_work The skb dequeued from tx_queue is lost when wl1251_ps_elp_wakeup fails with a -ETIMEDOUT error. Fix that by queueing the skb back to tx_queue. | ||||
| CVE-2025-37983 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: qibfs: fix _another_ leak failure to allocate inode => leaked dentry... this one had been there since the initial merge; to be fair, if we are that far OOM, the odds of failing at that particular allocation are low... | ||||
| CVE-2025-37985 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: wdm: close race between wdm_open and wdm_wwan_port_stop Clearing WDM_WWAN_IN_USE must be the last action or we can open a chardev whose URBs are still poisoned | ||||
| CVE-2025-37986 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: class: Invalidate USB device pointers on partner unregistration To avoid using invalid USB device pointers after a Type-C partner disconnects, this patch clears the pointers upon partner unregistration. This ensures a clean state for future connections. | ||||
| CVE-2025-37987 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pds_core: Prevent possible adminq overflow/stuck condition The pds_core's adminq is protected by the adminq_lock, which prevents more than 1 command to be posted onto it at any one time. This makes it so the client drivers cannot simultaneously post adminq commands. However, the completions happen in a different context, which means multiple adminq commands can be posted sequentially and all waiting on completion. On the FW side, the backing adminq request queue is only 16 entries long and the retry mechanism and/or overflow/stuck prevention is lacking. This can cause the adminq to get stuck, so commands are no longer processed and completions are no longer sent by the FW. As an initial fix, prevent more than 16 outstanding adminq commands so there's no way to cause the adminq from getting stuck. This works because the backing adminq request queue will never have more than 16 pending adminq commands, so it will never overflow. This is done by reducing the adminq depth to 16. | ||||
| CVE-2025-37988 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fix a couple of races in MNT_TREE_BENEATH handling by do_move_mount() Normally do_lock_mount(path, _) is locking a mountpoint pinned by *path and at the time when matching unlock_mount() unlocks that location it is still pinned by the same thing. Unfortunately, for 'beneath' case it's no longer that simple - the object being locked is not the one *path points to. It's the mountpoint of path->mnt. The thing is, without sufficient locking ->mnt_parent may change under us and none of the locks are held at that point. The rules are * mount_lock stabilizes m->mnt_parent for any mount m. * namespace_sem stabilizes m->mnt_parent, provided that m is mounted. * if either of the above holds and refcount of m is positive, we are guaranteed the same for refcount of m->mnt_parent. namespace_sem nests inside inode_lock(), so do_lock_mount() has to take inode_lock() before grabbing namespace_sem. It does recheck that path->mnt is still mounted in the same place after getting namespace_sem, and it does take care to pin the dentry. It is needed, since otherwise we might end up with racing mount --move (or umount) happening while we were getting locks; in that case dentry would no longer be a mountpoint and could've been evicted on memory pressure along with its inode - not something you want when grabbing lock on that inode. However, pinning a dentry is not enough - the matching mount is also pinned only by the fact that path->mnt is mounted on top it and at that point we are not holding any locks whatsoever, so the same kind of races could end up with all references to that mount gone just as we are about to enter inode_lock(). If that happens, we are left with filesystem being shut down while we are holding a dentry reference on it; results are not pretty. What we need to do is grab both dentry and mount at the same time; that makes inode_lock() safe *and* avoids the problem with fs getting shut down under us. After taking namespace_sem we verify that path->mnt is still mounted (which stabilizes its ->mnt_parent) and check that it's still mounted at the same place. From that point on to the matching namespace_unlock() we are guaranteed that mount/dentry pair we'd grabbed are also pinned by being the mountpoint of path->mnt, so we can quietly drop both the dentry reference (as the current code does) and mnt one - it's OK to do under namespace_sem, since we are not dropping the final refs. That solves the problem on do_lock_mount() side; unlock_mount() also has one, since dentry is guaranteed to stay pinned only until the namespace_unlock(). That's easy to fix - just have inode_unlock() done earlier, while it's still pinned by mp->m_dentry. | ||||
| CVE-2025-37989 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: phy: leds: fix memory leak A network restart test on a router led to an out-of-memory condition, which was traced to a memory leak in the PHY LED trigger code. The root cause is misuse of the devm API. The registration function (phy_led_triggers_register) is called from phy_attach_direct, not phy_probe, and the unregister function (phy_led_triggers_unregister) is called from phy_detach, not phy_remove. This means the register and unregister functions can be called multiple times for the same PHY device, but devm-allocated memory is not freed until the driver is unbound. This also prevents kmemleak from detecting the leak, as the devm API internally stores the allocated pointer. Fix this by replacing devm_kzalloc/devm_kcalloc with standard kzalloc/kcalloc, and add the corresponding kfree calls in the unregister path. | ||||
| CVE-2025-37990 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage() The function brcmf_usb_dl_writeimage() calls the function brcmf_usb_dl_cmd() but dose not check its return value. The 'state.state' and the 'state.bytes' are uninitialized if the function brcmf_usb_dl_cmd() fails. It is dangerous to use uninitialized variables in the conditions. Add error handling for brcmf_usb_dl_cmd() to jump to error handling path if the brcmf_usb_dl_cmd() fails and the 'state.state' and the 'state.bytes' are uninitialized. Improve the error message to report more detailed error information. | ||||
| CVE-2025-37991 | 1 Linux | 1 Linux Kernel | 2025-06-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: parisc: Fix double SIGFPE crash Camm noticed that on parisc a SIGFPE exception will crash an application with a second SIGFPE in the signal handler. Dave analyzed it, and it happens because glibc uses a double-word floating-point store to atomically update function descriptors. As a result of lazy binding, we hit a floating-point store in fpe_func almost immediately. When the T bit is set, an assist exception trap occurs when when the co-processor encounters *any* floating-point instruction except for a double store of register %fr0. The latter cancels all pending traps. Let's fix this by clearing the Trap (T) bit in the FP status register before returning to the signal handler in userspace. The issue can be reproduced with this test program: root@parisc:~# cat fpe.c static void fpe_func(int sig, siginfo_t *i, void *v) { sigset_t set; sigemptyset(&set); sigaddset(&set, SIGFPE); sigprocmask(SIG_UNBLOCK, &set, NULL); printf("GOT signal %d with si_code %ld\n", sig, i->si_code); } int main() { struct sigaction action = { .sa_sigaction = fpe_func, .sa_flags = SA_RESTART|SA_SIGINFO }; sigaction(SIGFPE, &action, 0); feenableexcept(FE_OVERFLOW); return printf("%lf\n",1.7976931348623158E308*1.7976931348623158E308); } root@parisc:~# gcc fpe.c -lm root@parisc:~# ./a.out Floating point exception root@parisc:~# strace -f ./a.out execve("./a.out", ["./a.out"], 0xf9ac7034 /* 20 vars */) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0 ... rt_sigaction(SIGFPE, {sa_handler=0x1110a, sa_mask=[], sa_flags=SA_RESTART|SA_SIGINFO}, NULL, 8) = 0 --- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0x1078f} --- --- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0xf8f21237} --- +++ killed by SIGFPE +++ Floating point exception | ||||