| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was determined in raysan5 raylib up to 909f040. Affected by this vulnerability is the function GenImageFontAtlas of the file src/rtext.c. Executing a manipulation can lead to heap-based buffer overflow. The attack can only be executed locally. The exploit has been publicly disclosed and may be utilized. This patch is called 5a3391fdce046bc5473e52afbd835dd2dc127146. Applying a patch is advised to resolve this issue. |
| A vulnerability was found in Sanluan PublicCMS up to 5.202506.d. Affected is the function delete of the file publiccms-trade/src/main/java/com/publiccms/controller/web/trade/TradeAddressController.java of the component Trade Address Deletion Endpoint. Performing a manipulation of the argument ids results in improper authorization. The attack may be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in Sanluan PublicCMS up to 5.202506.d. This impacts the function Save of the file com/publiccms/controller/admin/sys/TaskTemplateAdminController.java of the component Task Template Management Handler. Such manipulation of the argument path leads to path traversal. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in raysan5 raylib up to 909f040. Affected by this issue is the function LoadFontData of the file src/rtext.c. The manipulation leads to integer overflow. The attack can only be performed from a local environment. The exploit is publicly available and might be used. The identifier of the patch is 5a3391fdce046bc5473e52afbd835dd2dc127146. It is suggested to install a patch to address this issue. |
| A flaw has been found in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/ConfigExceptQQ. Executing a manipulation can lead to buffer overflow. The attack may be performed from remote. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in UTT 进取 520W 1.7.7-180627. This issue affects the function strcpy of the file /goform/ConfigExceptAli. The manipulation results in buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in UTT 进取 520W 1.7.7-180627. Affected by this issue is the function strcpy of the file /goform/formWebAuthGlobalConfig. Performing a manipulation results in buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in UTT 进取 520W 1.7.7-180627. This vulnerability affects the function strcpy of the file /goform/ConfigExceptMSN. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| No description is available for this CVE. |
| No description is available for this CVE. |
| A flaw was found in xfig. This vulnerability allows possible code execution via local input manipulation via bezier_spline function. |
| A vulnerability was found in Undertow where the ProxyProtocolReadListener reuses the same StringBuilder instance across multiple requests. This issue occurs when the parseProxyProtocolV1 method processes multiple requests on the same HTTP connection. As a result, different requests may share the same StringBuilder instance, potentially leading to information leakage between requests or responses. In some cases, a value from a previous request or response may be erroneously reused, which could lead to unintended data exposure. This issue primarily results in errors and connection termination but creates a risk of data leakage in multi-request environments. |
| Catalyst::Authentication::Credential::HTTP versions 1.018 and earlier for Perl generate nonces using the Perl Data::UUID library.
* Data::UUID does not use a strong cryptographic source for generating UUIDs.
* Data::UUID returns v3 UUIDs, which are generated from known information and are unsuitable for security, as per RFC 9562.
* The nonces should be generated from a strong cryptographic source, as per RFC 7616. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm2-sessions: Fix out of range indexing in name_size
'name_size' does not have any range checks, and it just directly indexes
with TPM_ALG_ID, which could lead into memory corruption at worst.
Address the issue by only processing known values and returning -EINVAL for
unrecognized values.
Make also 'tpm_buf_append_name' and 'tpm_buf_fill_hmac_session' fallible so
that errors are detected before causing any spurious TPM traffic.
End also the authorization session on failure in both of the functions, as
the session state would be then by definition corrupted. |
| In the Linux kernel, the following vulnerability has been resolved:
ksm: use range-walk function to jump over holes in scan_get_next_rmap_item
Currently, scan_get_next_rmap_item() walks every page address in a VMA to
locate mergeable pages. This becomes highly inefficient when scanning
large virtual memory areas that contain mostly unmapped regions, causing
ksmd to use large amount of cpu without deduplicating much pages.
This patch replaces the per-address lookup with a range walk using
walk_page_range(). The range walker allows KSM to skip over entire
unmapped holes in a VMA, avoiding unnecessary lookups. This problem was
previously discussed in [1].
Consider the following test program which creates a 32 TiB mapping in the
virtual address space but only populates a single page:
#include <unistd.h>
#include <stdio.h>
#include <sys/mman.h>
/* 32 TiB */
const size_t size = 32ul * 1024 * 1024 * 1024 * 1024;
int main() {
char *area = mmap(NULL, size, PROT_READ | PROT_WRITE,
MAP_NORESERVE | MAP_PRIVATE | MAP_ANON, -1, 0);
if (area == MAP_FAILED) {
perror("mmap() failed\n");
return -1;
}
/* Populate a single page such that we get an anon_vma. */
*area = 0;
/* Enable KSM. */
madvise(area, size, MADV_MERGEABLE);
pause();
return 0;
}
$ ./ksm-sparse &
$ echo 1 > /sys/kernel/mm/ksm/run
Without this patch ksmd uses 100% of the cpu for a long time (more then 1
hour in my test machine) scanning all the 32 TiB virtual address space
that contain only one mapped page. This makes ksmd essentially deadlocked
not able to deduplicate anything of value. With this patch ksmd walks
only the one mapped page and skips the rest of the 32 TiB virtual address
space, making the scan fast using little cpu. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: Use __sk_dst_get() and dst_dev_rcu() in get_netdev_for_sock().
get_netdev_for_sock() is called during setsockopt(),
so not under RCU.
Using sk_dst_get(sk)->dev could trigger UAF.
Let's use __sk_dst_get() and dst_dev_rcu().
Note that the only ->ndo_sk_get_lower_dev() user is
bond_sk_get_lower_dev(), which uses RCU. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: uprobes: Add missing fence.i after building the XOL buffer
The XOL (execute out-of-line) buffer is used to single-step the
replaced instruction(s) for uprobes. The RISC-V port was missing a
proper fence.i (i$ flushing) after constructing the XOL buffer, which
can result in incorrect execution of stale/broken instructions.
This was found running the BPF selftests "test_progs:
uprobe_autoattach, attach_probe" on the Spacemit K1/X60, where the
uprobes tests randomly blew up. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: Fix uninitialized 'offp' in statmount_string()
In statmount_string(), most flags assign an output offset pointer (offp)
which is later updated with the string offset. However, the
STATMOUNT_MNT_UIDMAP and STATMOUNT_MNT_GIDMAP cases directly set the
struct fields instead of using offp. This leaves offp uninitialized,
leading to a possible uninitialized dereference when *offp is updated.
Fix it by assigning offp for UIDMAP and GIDMAP as well, keeping the code
path consistent. |
| Authentication bypass in the password recovery feature of the local web interface across multiple VIGI camera models allows an attacker on the LAN to reset the admin password without verification by manipulating client-side state. Attackers can gain full administrative access to the device, compromising configuration and network security. |
| Buffer overflow in XPS font parse processing on Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *: Satera LBP670C Series/Satera MF750C Series firmware v06.02 and earlier sold in Japan.Color imageCLASS LBP630C/Color imageCLASS MF650C Series/imageCLASS LBP230 Series/imageCLASS X LBP1238 II/imageCLASS MF450 Series/imageCLASS X MF1238 II/imageCLASS X MF1643i II/imageCLASS X MF1643iF II firmware v06.02 and earlier sold in US.i-SENSYS LBP630C Series/i-SENSYS MF650C Series/i-SENSYS LBP230 Series/1238P II/1238Pr II/i-SENSYS MF450 Series/i-SENSYS MF550 Series/1238i II/1238iF II/imageRUNNER 1643i II/imageRUNNER 1643iF II firmware v06.02 and earlier sold in Europe. |
