| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| D-Link DWR-M961 devices with hardware version C1 and software version 1.1.2_C1_202602110044 contain a command injection vulnerability in the /boafrm/formWsc interface. A remote attacker can inject arbitrary malicious commands into the localPin, targetAPSsid, peerPin, and peerRptPin fields, resulting in command execution with root privileges. |
| A heap out-of-bounds write vulnerability was found in the GStreamer gst-plugins-bad adpcmdec element when decoding IMA/DVI ADPCM audio. Insufficient validation of the per-block sample count for multi-channel streams allows a crafted WAV file to cause writes beyond the allocated output buffer. This can lead to application crash, denial of service, memory corruption, or potentially arbitrary code execution when untrusted media is processed. |
| A security vulnerability has been detected in saithink/saigroup SaiAdmin up to 5.0.1. This impacts the function shell_exec of the file /app/saipackage/install/upload of the component Plugin Upload Endpoint. The manipulation leads to unrestricted upload. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. This product is published by multiple vendors. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx9.4.3: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit 5676593d08998d7a6d9e2d51d6b54b3820e3755c) |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_elf_fdpic: only honour the first PT_INTERP
The program header scan handles PT_INTERP from a switch nested in the
scan loop, so its break leaves the switch and not the loop. A binary
carrying more than one PT_INTERP runs the case again and overwrites both
interpreter_name and interpreter. The previous name allocation leaks and
so does the previous interpreter reference, along with the write denial
open_exec() took on it. The denial is never released, so the file stays
unwritable for as long as the system runs.
An unprivileged caller reaches this with a crafted binary and repeats it
at will. binfmt_elf stops at the first PT_INTERP. Do the same here.
The flaw dates back to the driver's introduction in the pre-git history
tree introduced in v2.6.11 by 91808d6ebe39 ("[PATCH] FRV: Add FDPIC ELF
binary format driver"). |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix afs_edit_dir_remove() to get, not find, block 0
Fix afs_edit_dir_remove() to use afs_dir_get_block() to get block 0 rather
than afs_dir_find_block() as the latter caches the found block in the
afs_dir_iter and may[*] switch out the page it's on if another
afs_dir_find_block() is done. This parallels what afs_edit_dir_add() does.
[*] There's more than one block per page. |
| A vulnerability was found in code-projects Task Management System 1.0. This issue affects some unknown processing of the file /user/CommentSave.php. The manipulation of the argument comment/task_id/mineId/recId/myName/myImage results in cross site scripting. It is possible to launch the attack remotely. The exploit has been made public and could be used. |
| A security flaw has been discovered in Handwriting-OCR handwriting-ocr-mcp-server 0.1.0. Affected by this vulnerability is the function fs.readFileSync of the file src/index.ts of the component upload_document. Performing a manipulation of the argument File results in path traversal. Attacking locally is a requirement. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability has been found in lmammino oidc-authorizer 0.4.0. This issue affects the function parse_token_from_header of the file src/parse_token_from_header.rs of the component Authorization Header Parsing. The manipulation of the argument authorization_token leads to denial of service. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| An Expected Behavior Violation [CWE-440] vulnerability in WatchGuard Fireware OS may allow an attacker to bypass the Fireware OS boot time system integrity check and prevent the Firebox from shutting down in the event of a system integrity check failure. The on-demand system integrity check in the Fireware Web UI will correctly show a failed system integrity check message in the event of a failure. |
| An XPath Injection vulnerability in WatchGuard Fireware OS may allow a remote unauthenticated attacker to retrieve sensitive information from the Firebox configuration through an exposed authentication or management web interface. This vulnerability only affects Firebox systems that have at least one authentication hotspot configured. |
| A security flaw has been discovered in MingSoft MCMS up to 3.0.6. Affected is an unknown function of the file /mdiy/form/get of the component ms-mdiy. The manipulation results in information disclosure. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: fix io_thread race in rxrpc_wake_up_io_thread()
rxrpc_wake_up_io_thread() checks local->io_thread before waking it, but
then reloads the pointer for wake_up_process().
local->io_thread is cleared with WRITE_ONCE() when the I/O thread exits, so
the second load can see NULL even if the first load did not.
Take a READ_ONCE() snapshot and use it for both the NULL check and the
wake_up_process() call, as rxrpc_encap_rcv() already does. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix pre-auth out-of-bounds read on snaptrace in ceph_handle_caps()
ceph_handle_caps() reads snap_trace_len from the wire-format
ceph_mds_caps header and uses it unconditionally to build a fake
end pointer (snaptrace + snaptrace_len) that is later handed to
ceph_update_snap_trace() in the CEPH_CAP_OP_IMPORT case:
snaptrace = h + 1;
snaptrace_len = le32_to_cpu(h->snap_trace_len);
p = snaptrace + snaptrace_len;
...
case CEPH_CAP_OP_IMPORT:
if (snaptrace_len) {
...
if (ceph_update_snap_trace(mdsc, snaptrace,
snaptrace + snaptrace_len,
false, &realm)) { ... }
ceph_update_snap_trace() then decodes a struct ceph_mds_snap_realm
from snaptrace using ceph_decode_need(&p, e, sizeof(*ri), bad)
with the attacker-supplied fake end e == snaptrace + snaptrace_len.
With snaptrace_len == 0xFFFFFFFF the bound check is trivially
satisfied, ri = p reads sizeof(struct ceph_mds_snap_realm) past
the legitimate msg->front buffer, and ri->num_snaps /
ri->num_prior_parent_snaps then drive further out-of-bounds
reads of the encoded snap arrays.
The eleven msg_version >= 2 .. msg_version >= 12 decoder blocks
above the op switch each catch this OOB through their
ceph_decode_*_safe() / ceph_decode_need() helpers, but they sit
behind a hdr.version-gated if, so a malicious or compromised
MDS that sets msg->hdr.version = 1 reaches the IMPORT path with
no version-gated decoder having validated snap_trace_len. The
shape has been present since ceph_handle_caps() was introduced.
Validate snap_trace_len against the message front buffer before
consuming it, using the canonical ceph_decode_need() / ceph_has_room()
helper. The helper bounds the length with subtraction (n <= end - p,
guarded by end >= p) rather than pointer addition, so it is wrap-safe
for the attacker-controlled u32 length on 32-bit builds where
p + snap_trace_len could overflow the address space. This matches the
rest of the ceph decode path (e.g. the pool_ns_len check a few lines
below), and the existing goto bad cleanup already covers this exit
path. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in WatchGuard Fireware OS (Gateway Wireless Controller module) allows Stored XSS. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in WatchGuard Fireware OS (Autotask Technology Integration module) allows Stored XSS. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in WatchGuard Fireware OS (ConnectWise Technology Integration module) allows Stored XSS. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in WatchGuard Fireware OS (Tigerpaw Technology Integration module) allows Stored XSS. |
| nanoid (Nano ID) before 5.1.6 contains an infinite loop in the customAlphabet and customRandom functions. When these functions are configured with a size of 0, the internal generation loop never satisfies its exit condition and spins indefinitely, hanging the calling thread. An application that passes an unvalidated, attacker-controlled size of 0 to these functions is exposed to a denial-of-service condition. |
| An Out-of-bounds Write vulnerability in WatchGuard Fireware OS's CLI could allow an authenticated privileged user to execute arbitrary code via a specially crafted CLI command. |
