| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In SiSDK v2026.6.0 and earlier, high network traffic loads can cause a dropped ACK leading to a denial of service. This is only present for EFR32MG24 and EFR32MG26 devices running concurrent multiprotocol Zigbee and Thread. |
| Wazuh is an open-source security platform providing unified XDR and SIEM protection for endpoints and cloud workloads. In versions 4.0.0 through 4.14.6, a malicious or man-in-the-middle enrollment manager can crash a Wazuh agent during enrollment by returning a malformed key response with fewer than four fields, causing a NULL pointer dereference. The w_enrollment_process_agent_key() routine splits the manager-provided key into four space-separated fields but does not verify that all fields are present before passing them to validators. Because OS_StrBreak() leaves missing trailing entries as NULL and OS_IsValidName() calls strlen() on its argument without a NULL check, a response such as OSSEC K:'1' reaches OS_IsValidName(NULL) and terminates the agent process. Since Wazuh permits enrollment against an unverified manager when no CA certificate is configured, an attacker operating a rogue manager or intercepting the enrollment flow can deterministically crash agents, resulting in denial of service. This issue is fixed in version 4.14.7. |
| gitoxide before 0.38.2 fails to validate carriage return characters in URL values passed to credential helpers. Attackers can supply URLs containing bare carriage returns to inject additional helper protocol fields and cause credential helpers to return credentials for attacker-specified hosts instead of the requested URL. |
| A heap-based buffer overflow vulnerability exists in openNDS before 11.0.0 that allows an unauthenticated attacker on the captive portal network to crash the openNDS daemon (denial of service) and potentially achieve remote code execution. This is in http_microhttpd.c. |
| The TranslatePress – Translate Multilingual sites with AI Translation plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Comment Noise-Key Injection into HTML Parser in all versions up to, and including, 3.3.3 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation is possible because WordPress's comment KSES allowlist permits the payload structure — an anchor tag with href and title attributes alongside a code tag — causing the malicious comment to be stored verbatim in the database, where it is later processed by the vulnerable parser during page translation. |
| A command injection vulnerability in the 'advanced/curl' component of Osbil Technology oPanel v1.19.50 and earlier allows authenticated attackers to execute arbitrary shell commands via the 'url' parameter |
| Kimai before 2.53.0 contains an open redirect vulnerability in the SAML authentication success handler that accepts unvalidated RelayState POST parameters as redirect destinations. Attackers with IdP access can supply malicious RelayState values to redirect authenticated users to attacker-controlled URLs for credential theft or phishing attacks. |
| Simple Machines Forum (SMF) through 2.1.7, fixed in commit 6f0dc61, contains an authorization state-confusion vulnerability in the profile loader that allows authenticated low-privileged users to gain administrator access by supplying multiple values for the user parameter. Attackers can exploit the mismatch between Profile::$member and User::$me->is_owner during sequential profile loading to be treated as the owner of an administrator profile, enabling unauthorized password changes and full account takeover. |
| Nokogiri before 1.14.3 (CRuby implementation only, when using the packaged libxml2) bundles libxml2 v2.10.3, which is vulnerable to NULL pointer dereferences in XML Schema processing (xmlSchemaFixupComplexType, CVE-2023-28484, and xmlSchemaCheckCOSSTDerivedOK). An attacker who supplies a crafted/malformed XML schema can cause libxml2 to dereference a NULL pointer and potentially segfault, resulting in a denial of service. Nokogiri 1.14.3 upgrades the packaged libxml2 to v2.10.4 to resolve these issues. |
| Nokogiri versions before 1.13.5 contain an integer overflow vulnerability in packaged libxml2 buffer handling functions that allows attackers to cause out-of-bounds memory writes. Attackers can exploit this by crafting multi-gigabyte XML files to trigger buffer overflows resulting in information disclosure, data modification, or denial of service. |
| Nokogiri before 1.13.9 (CRuby implementation using packaged libraries) bundles libxml2 v2.9.14, which is affected by CVE-2022-40304 (data corruption / double-free from an entity reference cycle when entity content is allocated from a dict) and CVE-2022-40303 (integer overflows when parsing with XML_PARSE_HUGE). Nokogiri 1.13.9 upgrades the packaged libxml2 to v2.10.3 to address these issues. Processing crafted XML input may lead to denial of service or memory corruption. (The advisory also references CVE-2022-2309, a NULL pointer dereference via iterwalk/canonicalize, which maintainers determined does not affect Nokogiri users.) |
| Nokogiri before 1.11.4 (CRuby implementation only, when the packaged/vendored libxml2 is used) bundles libxml2 2.9.10, which is affected by multiple vulnerabilities addressed in libxml2 2.9.12, including a memory leak in xmlSchemaValidateStream (CVE-2019-20388), a global buffer over-read in xmlEncodeEntitiesInternal (CVE-2020-24977), a heap-based buffer overflow (CVE-2021-3517), and an out-of-bounds read (CVE-2021-3518). Processing crafted XML documents may lead to denial of service, information disclosure, or memory corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: sloppy-logic-analyzer: fix use-after-free via debugfs trigger on unbind
The "trigger" debugfs file has a hand-rolled ->write handler
(trigger_write()) that dereferences the per-device gpio_la_poll_priv. The
file is created with debugfs_create_file_unsafe(), and the handler never
takes a debugfs reference. Nothing keeps the object alive while the
handler runs.
priv is allocated with devm_kzalloc(). devres frees it when the platform
device is unbound. debugfs_create_file_unsafe() installs no full_proxy
wrapper, so debugfs_remove_recursive() in gpio_la_poll_remove() does not
wait for an in-flight trigger_write(). The blob_lock taken there does not
help, because trigger_write() never takes it. A write that races an unbind
therefore writes into freed memory:
trigger_write() gpio_la_poll_remove()
priv = m->private
buf = memdup_user() [may sleep]
mutex_lock(&priv->blob_lock)
debugfs_remove_recursive() [no wait]
mutex_unlock(&priv->blob_lock)
(remove returns; devres frees priv)
priv->trig_data = buf <-- use-after-free write
priv->trig_len = count
The race is reachable by root via
/sys/bus/platform/drivers/gpio-sloppy-logic-analyzer/unbind.
Create "trigger" with debugfs_create_file() instead. Its full_proxy
wrapper makes debugfs_remove_recursive() drain any in-flight ->write
before it returns.
The use-after-free is confirmed under KASAN with a minimal reproducer of
the same debugfs_create_file_unsafe() plus devm_kzalloc() pattern
(available on request); it produces a slab-use-after-free write in the
handler. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: hynitron_cstxxx - validate touch count and finger IDs
The driver allocates max_touch_num input slots, which are indexed from
zero through max_touch_num - 1. The current check allows a finger ID
equal to max_touch_num to reach cst3xx_report_contact(). While the input
core ignores out-of-range slot indices, reporting touch data without a
valid slot change corrupts the touch state of the previously active slot.
The touch count is read from the controller's report and is used to
index the fixed-size report buffer without first checking its range.
Reject counts larger than the supported number of touch slots before
checking the trailing byte or parsing touch data.
Reject finger IDs equal to or greater than max_touch_num, and return
immediately when an invalid finger ID is encountered so that corrupt
touch frames are discarded instead of reporting partial contact state.
The V821 Avaota F1 board configures the vendor driver with one touch
slot, so finger ID 1 is already invalid on that device. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer
rmi_f54_work() reads a diagnostics report from the device into
f54->report_data, sizing the transfer with rmi_f54_get_report_size():
report_size = rmi_f54_get_report_size(f54);
...
for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) {
int size = min(F54_REPORT_DATA_SIZE, report_size - i);
...
rmi_read_block(.., f54->report_data + i, size);
}
report_data is allocated once at probe from F54's own electrode counts
(array3_size(f54->num_tx_electrodes, f54->num_rx_electrodes, sizeof(u16))),
but rmi_f54_get_report_size() computes the size from
drv_data->num_*_electrodes when those are set, i.e. from the F55
function's electrode counts. Both counts come straight from device
queries (F54 and F55 each report up to 255 electrodes) and nothing
constrains the F55 counts to the F54 ones.
A malicious or malfunctioning RMI4 device that reports larger F55
electrode counts than its F54 counts makes report_size exceed the
allocation, so the read loop writes past report_data (and the V4L2
dequeue memcpy() then reads past it). On conforming hardware the F55
configured electrodes are a subset of the F54 physical electrodes, so
report_size never exceeds the buffer and well-behaved devices are
unaffected.
Record the allocation size and reject a report that does not fit,
mirroring the existing zero-size check. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - zero report size on F54 work error
In rmi_f54_work(), if an error occurs during report request or command
verification, the code jumped directly to the 'error' label, bypassing
the 'abort' label where f54->report_size was normally zeroed out.
This left f54->report_size containing its previous successful payload
size. If a user then altered the V4L2 format to a smaller size, and a
subsequent run failed, rmi_f54_buffer_queue() would copy the stale,
larger payload size into the shrunken V4L2 buffer, causing a heap
buffer overflow.
Fix this by merging the 'abort' and 'error' labels into a single 'out'
exit path, and ensuring that f54->report_size is always set to 0 on
failure by checking for error and zeroing the local report_size first. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: focaltech - fix array out-of-bounds in focaltech_process_rel_packet
Make finger2 (and also finger1) unsigned, so that if the finger index in
the packet is 0 then subtracting 1 creates an array index which overflows
above the existing check for FOC_MAX_FINGERS, as the existing comment says
it should, instead of writing to state->fingers[-1]. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-pcm: Continue the pipeline trigger in case of IPC timeout
Ignore IPC errors for pipeline state change if the firmware state is
crashed or the IPC has timed out.
If the firmware has crashed the kernel still needs to go through the state
changes to reset its internal to be able to correctly work the next time
the DSP is booted up.
The case with IPC timeout is a bit more problematic, but it has been
rootcaused to be the result of system scheduling blockage and the firmware
did actually received and handled the message, but the reply handling got
blocked by issues outside of the SOF stack.
So far the best way to handle this is to continue with setting the state. |
| In the Linux kernel, the following vulnerability has been resolved:
samples/damon/mtier: fail early if address range parameters are invalid
The comment on top of `struct damon_region` clearly says that
For any use case, @ar should be non-zero positive size.
which is now verified in damon_verify_new_region() if the kernel is built
with DAMON_DEBUG_SANITY.
The WARN_ONCE() can be triggered if the mtier sample module is enabled
before node{0,1}_{start,end}_addr have been properly initialized, which is
obviously not good.
------------[ cut here ]------------
start 0 >= end 0
WARNING: mm/damon/core.c:217 at damon_new_region+0xf4/0x118, CPU#59: bash/341468
Call trace:
damon_new_region+0xf4/0x118 (P)
damon_set_regions+0xfc/0x3c0
damon_sample_mtier_build_ctx+0xe8/0x3a8
damon_sample_mtier_start+0x1c/0x90
damon_sample_mtier_enable_store+0x98/0xb0
param_attr_store+0xb4/0x128
module_attr_store+0x2c/0x50
sysfs_kf_write+0x58/0x90
kernfs_fop_write_iter+0x16c/0x238
vfs_write+0x2c0/0x370
ksys_write+0x74/0x118
__arm64_sys_write+0x24/0x38
invoke_syscall+0xa8/0x118
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x54/0x370
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1ac/0x1b0
---[ end trace 0000000000000000 ]---
Note that the same issue can happen if detect_node_addresses is true, and
node 0 or 1 is memoryless. Fix it together by checking the validity of
parameters right before damon_new_region() and fail early if they're
invalid. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: ensure accessible eth_hdr proto field
When batadv_get_vid() accesses the proto field of the ethernet header, it
is not checking if the data itself is accessible. The caller is responsible
for it. But in contrast to other call sites, batadv_dat_get_vid() and its
caller didn't make sure this is true. This could have caused an
out-of-bounds access. |
