| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix panic when calling skb_linearize
The panic can be reproduced by executing the command:
./bench sockmap -c 2 -p 1 -a --rx-verdict-ingress --rx-strp 100000
Then a kernel panic was captured:
'''
[ 657.460555] kernel BUG at net/core/skbuff.c:2178!
[ 657.462680] Tainted: [W]=WARN
[ 657.463287] Workqueue: events sk_psock_backlog
...
[ 657.469610] <TASK>
[ 657.469738] ? die+0x36/0x90
[ 657.469916] ? do_trap+0x1d0/0x270
[ 657.470118] ? pskb_expand_head+0x612/0xf40
[ 657.470376] ? pskb_expand_head+0x612/0xf40
[ 657.470620] ? do_error_trap+0xa3/0x170
[ 657.470846] ? pskb_expand_head+0x612/0xf40
[ 657.471092] ? handle_invalid_op+0x2c/0x40
[ 657.471335] ? pskb_expand_head+0x612/0xf40
[ 657.471579] ? exc_invalid_op+0x2d/0x40
[ 657.471805] ? asm_exc_invalid_op+0x1a/0x20
[ 657.472052] ? pskb_expand_head+0xd1/0xf40
[ 657.472292] ? pskb_expand_head+0x612/0xf40
[ 657.472540] ? lock_acquire+0x18f/0x4e0
[ 657.472766] ? find_held_lock+0x2d/0x110
[ 657.472999] ? __pfx_pskb_expand_head+0x10/0x10
[ 657.473263] ? __kmalloc_cache_noprof+0x5b/0x470
[ 657.473537] ? __pfx___lock_release.isra.0+0x10/0x10
[ 657.473826] __pskb_pull_tail+0xfd/0x1d20
[ 657.474062] ? __kasan_slab_alloc+0x4e/0x90
[ 657.474707] sk_psock_skb_ingress_enqueue+0x3bf/0x510
[ 657.475392] ? __kasan_kmalloc+0xaa/0xb0
[ 657.476010] sk_psock_backlog+0x5cf/0xd70
[ 657.476637] process_one_work+0x858/0x1a20
'''
The panic originates from the assertion BUG_ON(skb_shared(skb)) in
skb_linearize(). A previous commit(see Fixes tag) introduced skb_get()
to avoid race conditions between skb operations in the backlog and skb
release in the recvmsg path. However, this caused the panic to always
occur when skb_linearize is executed.
The "--rx-strp 100000" parameter forces the RX path to use the strparser
module which aggregates data until it reaches 100KB before calling sockmap
logic. The 100KB payload exceeds MAX_MSG_FRAGS, triggering skb_linearize.
To fix this issue, just move skb_get into sk_psock_skb_ingress_enqueue.
'''
sk_psock_backlog:
sk_psock_handle_skb
skb_get(skb) <== we move it into 'sk_psock_skb_ingress_enqueue'
sk_psock_skb_ingress____________
↓
|
| → sk_psock_skb_ingress_self
| sk_psock_skb_ingress_enqueue
sk_psock_verdict_apply_________________↑ skb_linearize
'''
Note that for verdict_apply path, the skb_get operation is unnecessary so
we add 'take_ref' param to control it's behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: bcm: rpi: Add NULL check in raspberrypi_clk_register()
devm_kasprintf() returns NULL when memory allocation fails. Currently,
raspberrypi_clk_register() does not check for this case, which results
in a NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: fix the 'para' buffer size to avoid reading out of bounds
Set the size to 6 instead of 2, since 'para' array is passed to
'rtw_fw_bt_wifi_control(rtwdev, para[0], ¶[1])', which reads
5 bytes:
void rtw_fw_bt_wifi_control(struct rtw_dev *rtwdev, u8 op_code, u8 *data)
{
...
SET_BT_WIFI_CONTROL_DATA1(h2c_pkt, *data);
SET_BT_WIFI_CONTROL_DATA2(h2c_pkt, *(data + 1));
...
SET_BT_WIFI_CONTROL_DATA5(h2c_pkt, *(data + 4));
Detected using the static analysis tool - Svace. |
| Authentication Bypass by Spoofing vulnerability in HYPR Server allows Identity Spoofing.This issue affects Server: before 10.1. |
| The LazyTasks – Project & Task Management with Collaboration, Kanban and Gantt Chart plugin for WordPress is vulnerable to privilege escalation via account takeover in all versions up to, and including, 1.2.29. This is due to the plugin not properly validating a user's identity via the 'wp-json/lazytasks/api/v1/user/role/edit/' REST API endpoint prior to updating their details like email address. This makes it possible for unauthenticated attackers to change arbitrary user's email addresses, including administrators, and leverage that to reset the user's password and gain access to their account. It is also possible for attackers to abuse this endpoint to grant users with access to additional roles within the plugin |
| Purei CMS 1.0 contains a time-based blind SQL injection vulnerability that allows attackers to manipulate database queries through unfiltered user input parameters. Attackers can exploit vulnerable endpoints like getAllParks.php and events-ajax.php by injecting crafted SQL payloads to potentially extract or modify database information. |
| Siklu MultiHaul TG series devices before version 2.0.0 contain an unauthenticated vulnerability that allows remote attackers to retrieve randomly generated credentials via a network request. Attackers can send a specific hex-encoded command to port 12777 to obtain username and password, enabling direct SSH access to the device. |
| A configuration issue was addressed with additional restrictions. This issue is fixed in visionOS 26.2, iOS 26.2 and iPadOS 26.2, macOS Tahoe 26.2. Photos in the Hidden Photos Album may be viewed without authentication. |
| A logging issue was addressed with improved data redaction. This issue is fixed in iOS 26.2 and iPadOS 26.2. An app may be able to access user-sensitive data. |
| The issue was addressed with improved handling of caches. This issue is fixed in macOS Tahoe 26.2. An app may be able to access protected user data. |
| In the Linux kernel, the following vulnerability has been resolved:
hisi_acc_vfio_pci: fix XQE dma address error
The dma addresses of EQE and AEQE are wrong after migration and
results in guest kernel-mode encryption services failure.
Comparing the definition of hardware registers, we found that
there was an error when the data read from the register was
combined into an address. Therefore, the address combination
sequence needs to be corrected.
Even after fixing the above problem, we still have an issue
where the Guest from an old kernel can get migrated to
new kernel and may result in wrong data.
In order to ensure that the address is correct after migration,
if an old magic number is detected, the dma address needs to be
updated. |
| MaxKB is an open-source AI assistant for enterprise. Versions 2.3.1 and below have improper file permissions which allow attackers to overwrite the built-in dynamic linker and other critical files, potentially resulting in privilege escalation. This issue is fixed in version 2.4.0. |
| The Aquarius HelperTool (1.0.003) privileged XPC service on macOS contains multiple flaws that allow local privilege escalation. The service accepts XPC connections from any local process without validating the client's identity, and its authorization logic incorrectly calls AuthorizationCopyRights with a NULL reference, causing all authorization checks to succeed. The executeCommand:authorization:withReply: method then interpolates attacker-controlled input into NSTask and executes it with root privileges. A local attacker can exploit these weaknesses to run arbitrary commands as root, create persistent backdoors, or obtain a fully interactive root shell. |
| An HTML injection vulnerability in Kentico Xperience allows attackers to inject malicious HTML values into form submission emails via unencoded form fields. Unencoded form values could enable HTML content execution in recipient email clients, potentially compromising email security. |
| An unauthenticated remote attacker can abuse unsafe sscanf calls within the check_account() function to write arbitrary data into fixed-size stack buffers which leads to full device compromise. |
| A potential security vulnerability in Quartus® Prime Pro Edition Design Software may allow escalation of privilege. |
| The Simple AL Slider plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the `$_SERVER['PHP_SELF']` variable in all versions up to, and including, 1.2.10 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| The LS Google Map Router plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'map_type' parameter in all versions up to, and including, 1.1.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Rabbit Hole plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.1. This is due to missing or incorrect nonce validation on the plugin's reset functionality. This makes it possible for unauthenticated attackers to reset the plugin's settings via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. The vulnerability is exacerbated by the fact that the reset operation is performed via a GET request, making exploitation trivial via image tags or hyperlinks. |
| The NewStatPress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via a regex bypass in nsp_shortcode function in all versions up to, and including, 1.4.3 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
