| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| D-Link Router DIR-868L A1 FW106KRb01.bin has an unauthenticated remote code execution vulnerability in the cgibin binary. The HNAP service provided by cgibin does not filter the HTTP SOAPAction header field. The unauthenticated remote attacker can execute the shell command. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix null-ptr-deref of mreplace in raid10_sync_request
There are two check of 'mreplace' in raid10_sync_request(). In the first
check, 'need_replace' will be set and 'mreplace' will be used later if
no-Faulty 'mreplace' exists, In the second check, 'mreplace' will be
set to NULL if it is Faulty, but 'need_replace' will not be changed
accordingly. null-ptr-deref occurs if Faulty is set between two check.
Fix it by merging two checks into one. And replace 'need_replace' with
'mreplace' because their values are always the same. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: fix leaked reference count of nfsd4_ssc_umount_item
The reference count of nfsd4_ssc_umount_item is not decremented
on error conditions. This prevents the laundromat from unmounting
the vfsmount of the source file.
This patch decrements the reference count of nfsd4_ssc_umount_item
on error. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: Reset connection when trying to use SMCRv2 fails.
We found a crash when using SMCRv2 with 2 Mellanox ConnectX-4. It
can be reproduced by:
- smc_run nginx
- smc_run wrk -t 32 -c 500 -d 30 http://<ip>:<port>
BUG: kernel NULL pointer dereference, address: 0000000000000014
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 8000000108713067 P4D 8000000108713067 PUD 151127067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 4 PID: 2441 Comm: kworker/4:249 Kdump: loaded Tainted: G W E 6.4.0-rc1+ #42
Workqueue: smc_hs_wq smc_listen_work [smc]
RIP: 0010:smc_clc_send_confirm_accept+0x284/0x580 [smc]
RSP: 0018:ffffb8294b2d7c78 EFLAGS: 00010a06
RAX: ffff8f1873238880 RBX: ffffb8294b2d7dc8 RCX: 0000000000000000
RDX: 00000000000000b4 RSI: 0000000000000001 RDI: 0000000000b40c00
RBP: ffffb8294b2d7db8 R08: ffff8f1815c5860c R09: 0000000000000000
R10: 0000000000000400 R11: 0000000000000000 R12: ffff8f1846f56180
R13: ffff8f1815c5860c R14: 0000000000000001 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8f1aefd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000014 CR3: 00000001027a0001 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? mlx5_ib_map_mr_sg+0xa1/0xd0 [mlx5_ib]
? smcr_buf_map_link+0x24b/0x290 [smc]
? __smc_buf_create+0x4ee/0x9b0 [smc]
smc_clc_send_accept+0x4c/0xb0 [smc]
smc_listen_work+0x346/0x650 [smc]
? __schedule+0x279/0x820
process_one_work+0x1e5/0x3f0
worker_thread+0x4d/0x2f0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
During the CLC handshake, server sequentially tries available SMCRv2
and SMCRv1 devices in smc_listen_work().
If an SMCRv2 device is found. SMCv2 based link group and link will be
assigned to the connection. Then assumed that some buffer assignment
errors happen later in the CLC handshake, such as RMB registration
failure, server will give up SMCRv2 and try SMCRv1 device instead. But
the resources assigned to the connection won't be reset.
When server tries SMCRv1 device, the connection creation process will
be executed again. Since conn->lnk has been assigned when trying SMCRv2,
it will not be set to the correct SMCRv1 link in
smcr_lgr_conn_assign_link(). So in such situation, conn->lgr points to
correct SMCRv1 link group but conn->lnk points to the SMCRv2 link
mistakenly.
Then in smc_clc_send_confirm_accept(), conn->rmb_desc->mr[link->link_idx]
will be accessed. Since the link->link_idx is not correct, the related
MR may not have been initialized, so crash happens.
| Try SMCRv2 device first
| |-> conn->lgr: assign existed SMCRv2 link group;
| |-> conn->link: assign existed SMCRv2 link (link_idx may be 1 in SMC_LGR_SYMMETRIC);
| |-> sndbuf & RMB creation fails, quit;
|
| Try SMCRv1 device then
| |-> conn->lgr: create SMCRv1 link group and assign;
| |-> conn->link: keep SMCRv2 link mistakenly;
| |-> sndbuf & RMB creation succeed, only RMB->mr[link_idx = 0]
| initialized.
|
| Then smc_clc_send_confirm_accept() accesses
| conn->rmb_desc->mr[conn->link->link_idx, which is 1], then crash.
v
This patch tries to fix this by cleaning conn->lnk before assigning
link. In addition, it is better to reset the connection and clean the
resources assigned if trying SMCRv2 failed in buffer creation or
registration. |
| Editions of Rapid7 AppSpider Pro before version 7.5.018 is vulnerable to a stored cross-site scripting vulnerability in the "ScanName" field.
Despite the application preventing the inclusion of special characters within the "ScanName" field, this could be bypassed by modifying the configuration file directly.
This is fixed as of version 7.5.018 |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4
The T241 platform suffers from the T241-FABRIC-4 erratum which causes
unexpected behavior in the GIC when multiple transactions are received
simultaneously from different sources. This hardware issue impacts
NVIDIA server platforms that use more than two T241 chips
interconnected. Each chip has support for 320 {E}SPIs.
This issue occurs when multiple packets from different GICs are
incorrectly interleaved at the target chip. The erratum text below
specifies exactly what can cause multiple transfer packets susceptible
to interleaving and GIC state corruption. GIC state corruption can
lead to a range of problems, including kernel panics, and unexpected
behavior.
>From the erratum text:
"In some cases, inter-socket AXI4 Stream packets with multiple
transfers, may be interleaved by the fabric when presented to ARM
Generic Interrupt Controller. GIC expects all transfers of a packet
to be delivered without any interleaving.
The following GICv3 commands may result in multiple transfer packets
over inter-socket AXI4 Stream interface:
- Register reads from GICD_I* and GICD_N*
- Register writes to 64-bit GICD registers other than GICD_IROUTERn*
- ITS command MOVALL
Multiple commands in GICv4+ utilize multiple transfer packets,
including VMOVP, VMOVI, VMAPP, and 64-bit register accesses."
This issue impacts system configurations with more than 2 sockets,
that require multi-transfer packets to be sent over inter-socket
AXI4 Stream interface between GIC instances on different sockets.
GICv4 cannot be supported. GICv3 SW model can only be supported
with the workaround. Single and Dual socket configurations are not
impacted by this issue and support GICv3 and GICv4."
Writing to the chip alias region of the GICD_In{E} registers except
GICD_ICENABLERn has an equivalent effect as writing to the global
distributor. The SPI interrupt deactivate path is not impacted by
the erratum.
To fix this problem, implement a workaround that ensures read accesses
to the GICD_In{E} registers are directed to the chip that owns the
SPI, and disable GICv4.x features. To simplify code changes, the
gic_configure_irq() function uses the same alias region for both read
and write operations to GICD_ICFGR. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: avoid possible NULL skb pointer dereference
In 'mwifiex_handle_uap_rx_forward()', always check the value
returned by 'skb_copy()' to avoid potential NULL pointer
dereference in 'mwifiex_uap_queue_bridged_pkt()', and drop
original skb in case of copying failure.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mdp3: Fix resource leaks in of_find_device_by_node
Use put_device to release the object get through of_find_device_by_node,
avoiding resource leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix potential use-after-free when clear keys
Similar to commit c5d2b6fa26b5 ("Bluetooth: Fix use-after-free in
hci_remove_ltk/hci_remove_irk"). We can not access k after kfree_rcu()
call. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Fix device management cmd timeout flow
In the UFS error handling flow, the host will send a device management cmd
(NOP OUT) to the device for link recovery. If this cmd times out and
clearing the doorbell fails, ufshcd_wait_for_dev_cmd() will do nothing and
return. hba->dev_cmd.complete struct is not set to NULL.
When this happens, if cmd has been completed by device, then we will call
complete() in __ufshcd_transfer_req_compl(). Because the complete struct is
allocated on the stack, the following crash will occur:
ipanic_die+0x24/0x38 [mrdump]
die+0x344/0x748
arm64_notify_die+0x44/0x104
do_debug_exception+0x104/0x1e0
el1_dbg+0x38/0x54
el1_sync_handler+0x40/0x88
el1_sync+0x8c/0x140
queued_spin_lock_slowpath+0x2e4/0x3c0
__ufshcd_transfer_req_compl+0x3b0/0x1164
ufshcd_trc_handler+0x15c/0x308
ufshcd_host_reset_and_restore+0x54/0x260
ufshcd_reset_and_restore+0x28c/0x57c
ufshcd_err_handler+0xeb8/0x1b6c
process_one_work+0x288/0x964
worker_thread+0x4bc/0xc7c
kthread+0x15c/0x264
ret_from_fork+0x10/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Clean dangling pointer on bind error path
mtk_drm_bind() can fail, in which case drm_dev_put() is called,
destroying the drm_device object. However a pointer to it was still
being held in the private object, and that pointer would be passed along
to DRM in mtk_drm_sys_prepare() if a suspend were triggered at that
point, resulting in a panic. Clean the pointer when destroying the
object in the error path to prevent this from happening. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: dp: Only trigger DRM HPD events if bridge is attached
The MediaTek DisplayPort interface bridge driver starts its interrupts
as soon as its probed. However when the interrupts trigger the bridge
might not have been attached to a DRM device. As drm_helper_hpd_irq_event()
does not check whether the passed in drm_device is valid or not, a NULL
pointer passed in results in a kernel NULL pointer dereference in it.
Check whether the bridge is attached and only trigger an HPD event if
it is. |
| Rapid7 Appspider Pro versions below 7.5.021, suffer from a broken access control vulnerability in the application's configuration file loading mechanism, whereby an attacker can place files in directories belonging to other users or projects. Affected versions allow standard users to add custom configuration files. These files, which are loaded in alphabetical order, can override or change the settings of the original configuration files, creating a security vulnerability. This issue stems from improper directory access management.
This vulnerability was remediated in version 7.5.021 of the product. |
| In the Linux kernel, the following vulnerability has been resolved:
block: be a bit more careful in checking for NULL bdev while polling
Wei reports a crash with an application using polled IO:
PGD 14265e067 P4D 14265e067 PUD 47ec50067 PMD 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 21915 Comm: iocore_0 Kdump: loaded Tainted: G S 5.12.0-0_fbk12_clang_7346_g1bb6f2e7058f #1
Hardware name: Wiwynn Delta Lake MP T8/Delta Lake-Class2, BIOS Y3DLM08 04/10/2022
RIP: 0010:bio_poll+0x25/0x200
Code: 0f 1f 44 00 00 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 28 65 48 8b 04 25 28 00 00 00 48 89 44 24 20 48 8b 47 08 <48> 8b 80 70 02 00 00 4c 8b 70 50 8b 6f 34 31 db 83 fd ff 75 25 65
RSP: 0018:ffffc90005fafdf8 EFLAGS: 00010292
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 74b43cd65dd66600
RDX: 0000000000000003 RSI: ffffc90005fafe78 RDI: ffff8884b614e140
RBP: ffff88849964df78 R08: 0000000000000000 R09: 0000000000000008
R10: 0000000000000000 R11: 0000000000000000 R12: ffff88849964df00
R13: ffffc90005fafe78 R14: ffff888137d3c378 R15: 0000000000000001
FS: 00007fd195000640(0000) GS:ffff88903f400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000270 CR3: 0000000466121001 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
iocb_bio_iopoll+0x1d/0x30
io_do_iopoll+0xac/0x250
__se_sys_io_uring_enter+0x3c5/0x5a0
? __x64_sys_write+0x89/0xd0
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x94f225d
Code: 24 cc 00 00 00 41 8b 84 24 d0 00 00 00 c1 e0 04 83 e0 10 41 09 c2 8b 33 8b 53 04 4c 8b 43 18 4c 63 4b 0c b8 aa 01 00 00 0f 05 <85> c0 0f 88 85 00 00 00 29 03 45 84 f6 0f 84 88 00 00 00 41 f6 c7
RSP: 002b:00007fd194ffcd88 EFLAGS: 00000202 ORIG_RAX: 00000000000001aa
RAX: ffffffffffffffda RBX: 00007fd194ffcdc0 RCX: 00000000094f225d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000007
RBP: 00007fd194ffcdb0 R08: 0000000000000000 R09: 0000000000000008
R10: 0000000000000001 R11: 0000000000000202 R12: 00007fd269d68030
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000
which is due to bio->bi_bdev being NULL. This can happen if we have two
tasks doing polled IO, and task B ends up completing IO from task A if
they are sharing a poll queue. If task B completes the IO and puts the
bio into our cache, then it can allocate that bio again before task A
is done polling for it. As that would necessitate a preempt between the
two tasks, it's enough to just be a bit more careful in checking for
whether or not bio->bi_bdev is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/habanalabs: fix mem leak in capture user mappings
This commit fixes a memory leak caused when clearing the user_mappings
info when a new context is opened immediately after user_mapping is
captured and a hard reset is performed. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix race issue between cpu buffer write and swap
Warning happened in rb_end_commit() at code:
if (RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing)))
WARNING: CPU: 0 PID: 139 at kernel/trace/ring_buffer.c:3142
rb_commit+0x402/0x4a0
Call Trace:
ring_buffer_unlock_commit+0x42/0x250
trace_buffer_unlock_commit_regs+0x3b/0x250
trace_event_buffer_commit+0xe5/0x440
trace_event_buffer_reserve+0x11c/0x150
trace_event_raw_event_sched_switch+0x23c/0x2c0
__traceiter_sched_switch+0x59/0x80
__schedule+0x72b/0x1580
schedule+0x92/0x120
worker_thread+0xa0/0x6f0
It is because the race between writing event into cpu buffer and swapping
cpu buffer through file per_cpu/cpu0/snapshot:
Write on CPU 0 Swap buffer by per_cpu/cpu0/snapshot on CPU 1
-------- --------
tracing_snapshot_write()
[...]
ring_buffer_lock_reserve()
cpu_buffer = buffer->buffers[cpu]; // 1. Suppose find 'cpu_buffer_a';
[...]
rb_reserve_next_event()
[...]
ring_buffer_swap_cpu()
if (local_read(&cpu_buffer_a->committing))
goto out_dec;
if (local_read(&cpu_buffer_b->committing))
goto out_dec;
buffer_a->buffers[cpu] = cpu_buffer_b;
buffer_b->buffers[cpu] = cpu_buffer_a;
// 2. cpu_buffer has swapped here.
rb_start_commit(cpu_buffer);
if (unlikely(READ_ONCE(cpu_buffer->buffer)
!= buffer)) { // 3. This check passed due to 'cpu_buffer->buffer'
[...] // has not changed here.
return NULL;
}
cpu_buffer_b->buffer = buffer_a;
cpu_buffer_a->buffer = buffer_b;
[...]
// 4. Reserve event from 'cpu_buffer_a'.
ring_buffer_unlock_commit()
[...]
cpu_buffer = buffer->buffers[cpu]; // 5. Now find 'cpu_buffer_b' !!!
rb_commit(cpu_buffer)
rb_end_commit() // 6. WARN for the wrong 'committing' state !!!
Based on above analysis, we can easily reproduce by following testcase:
``` bash
#!/bin/bash
dmesg -n 7
sysctl -w kernel.panic_on_warn=1
TR=/sys/kernel/tracing
echo 7 > ${TR}/buffer_size_kb
echo "sched:sched_switch" > ${TR}/set_event
while [ true ]; do
echo 1 > ${TR}/per_cpu/cpu0/snapshot
done &
while [ true ]; do
echo 1 > ${TR}/per_cpu/cpu0/snapshot
done &
while [ true ]; do
echo 1 > ${TR}/per_cpu/cpu0/snapshot
done &
```
To fix it, IIUC, we can use smp_call_function_single() to do the swap on
the target cpu where the buffer is located, so that above race would be
avoided. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown
lpuart_dma_shutdown tears down lpuart dma, but lpuart_flush_buffer can
still occur which in turn tries to access dma apis if lpuart_dma_tx_use
flag is true. At this point since dma is torn down, these dma apis can
abort. Set lpuart_dma_tx_use and the corresponding rx flag
lpuart_dma_rx_use to false in lpuart_dma_shutdown so that dmas are not
accessed after they are relinquished.
Otherwise, when try to kill btattach, kernel may panic. This patch may
fix this issue.
root@imx8ulpevk:~# btattach -B /dev/ttyLP2 -S 115200
^C[ 90.182296] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
[ 90.189806] Modules linked in: moal(O) mlan(O)
[ 90.194258] CPU: 0 PID: 503 Comm: btattach Tainted: G O 5.15.32-06136-g34eecdf2f9e4 #37
[ 90.203554] Hardware name: NXP i.MX8ULP 9X9 EVK (DT)
[ 90.208513] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 90.215470] pc : fsl_edma3_disable_request+0x8/0x60
[ 90.220358] lr : fsl_edma3_terminate_all+0x34/0x20c
[ 90.225237] sp : ffff800013f0bac0
[ 90.228548] x29: ffff800013f0bac0 x28: 0000000000000001 x27: ffff000008404800
[ 90.235681] x26: ffff000008404960 x25: ffff000008404a08 x24: ffff000008404a00
[ 90.242813] x23: ffff000008404a60 x22: 0000000000000002 x21: 0000000000000000
[ 90.249946] x20: ffff800013f0baf8 x19: ffff00000559c800 x18: 0000000000000000
[ 90.257078] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 90.264211] x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000040
[ 90.271344] x11: ffff00000600c248 x10: ffff800013f0bb10 x9 : ffff000057bcb090
[ 90.278477] x8 : fffffc0000241a08 x7 : ffff00000534ee00 x6 : ffff000008404804
[ 90.285609] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff0000055b3480
[ 90.292742] x2 : ffff8000135c0000 x1 : ffff00000534ee00 x0 : ffff00000559c800
[ 90.299876] Call trace:
[ 90.302321] fsl_edma3_disable_request+0x8/0x60
[ 90.306851] lpuart_flush_buffer+0x40/0x160
[ 90.311037] uart_flush_buffer+0x88/0x120
[ 90.315050] tty_driver_flush_buffer+0x20/0x30
[ 90.319496] hci_uart_flush+0x44/0x90
[ 90.323162] +0x34/0x12c
[ 90.327253] tty_ldisc_close+0x38/0x70
[ 90.331005] tty_ldisc_release+0xa8/0x190
[ 90.335018] tty_release_struct+0x24/0x8c
[ 90.339022] tty_release+0x3ec/0x4c0
[ 90.342593] __fput+0x70/0x234
[ 90.345652] ____fput+0x14/0x20
[ 90.348790] task_work_run+0x84/0x17c
[ 90.352455] do_exit+0x310/0x96c
[ 90.355688] do_group_exit+0x3c/0xa0
[ 90.359259] __arm64_sys_exit_group+0x1c/0x20
[ 90.363609] invoke_syscall+0x48/0x114
[ 90.367362] el0_svc_common.constprop.0+0xd4/0xfc
[ 90.372068] do_el0_svc+0x2c/0x94
[ 90.375379] el0_svc+0x28/0x80
[ 90.378438] el0t_64_sync_handler+0xa8/0x130
[ 90.382711] el0t_64_sync+0x1a0/0x1a4
[ 90.386376] Code: 17ffffda d503201f d503233f f9409802 (b9400041)
[ 90.392467] ---[ end trace 2f60524b4a43f1f6 ]---
[ 90.397073] note: btattach[503] exited with preempt_count 1
[ 90.402636] Fixing recursive fault but reboot is needed! |
| In the Linux kernel, the following vulnerability has been resolved:
orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init()
When insert and remove the orangefs module, there are memory leaked
as below:
unreferenced object 0xffff88816b0cc000 (size 2048):
comm "insmod", pid 783, jiffies 4294813439 (age 65.512s)
hex dump (first 32 bytes):
6e 6f 6e 65 0a 00 00 00 00 00 00 00 00 00 00 00 none............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000031ab7788>] kmalloc_trace+0x27/0xa0
[<000000005b405fee>] orangefs_debugfs_init.cold+0xaf/0x17f
[<00000000e5a0085b>] 0xffffffffa02780f9
[<000000004232d9f7>] do_one_initcall+0x87/0x2a0
[<0000000054f22384>] do_init_module+0xdf/0x320
[<000000003263bdea>] load_module+0x2f98/0x3330
[<0000000052cd4153>] __do_sys_finit_module+0x113/0x1b0
[<00000000250ae02b>] do_syscall_64+0x35/0x80
[<00000000f11c03c7>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Use the golbal variable as the buffer rather than dynamic allocate to
slove the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/meson: reorder driver deinit sequence to fix use-after-free bug
Unloading the driver triggers the following KASAN warning:
[ +0.006275] =============================================================
[ +0.000029] BUG: KASAN: use-after-free in __list_del_entry_valid+0xe0/0x1a0
[ +0.000026] Read of size 8 at addr ffff000020c395e0 by task rmmod/2695
[ +0.000019] CPU: 5 PID: 2695 Comm: rmmod Tainted: G C O 5.19.0-rc6-lrmbkasan+ #1
[ +0.000013] Hardware name: Hardkernel ODROID-N2Plus (DT)
[ +0.000008] Call trace:
[ +0.000007] dump_backtrace+0x1ec/0x280
[ +0.000013] show_stack+0x24/0x80
[ +0.000008] dump_stack_lvl+0x98/0xd4
[ +0.000011] print_address_description.constprop.0+0x80/0x520
[ +0.000011] print_report+0x128/0x260
[ +0.000007] kasan_report+0xb8/0xfc
[ +0.000008] __asan_report_load8_noabort+0x3c/0x50
[ +0.000010] __list_del_entry_valid+0xe0/0x1a0
[ +0.000009] drm_atomic_private_obj_fini+0x30/0x200 [drm]
[ +0.000172] drm_bridge_detach+0x94/0x260 [drm]
[ +0.000145] drm_encoder_cleanup+0xa4/0x290 [drm]
[ +0.000144] drm_mode_config_cleanup+0x118/0x740 [drm]
[ +0.000143] drm_mode_config_init_release+0x1c/0x2c [drm]
[ +0.000144] drm_managed_release+0x170/0x414 [drm]
[ +0.000142] drm_dev_put.part.0+0xc0/0x124 [drm]
[ +0.000143] drm_dev_put+0x20/0x30 [drm]
[ +0.000142] meson_drv_unbind+0x1d8/0x2ac [meson_drm]
[ +0.000028] take_down_aggregate_device+0xb0/0x160
[ +0.000016] component_del+0x18c/0x360
[ +0.000009] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[ +0.000015] platform_remove+0x64/0xb0
[ +0.000009] device_remove+0xb8/0x154
[ +0.000009] device_release_driver_internal+0x398/0x5b0
[ +0.000009] driver_detach+0xac/0x1b0
[ +0.000009] bus_remove_driver+0x158/0x29c
[ +0.000009] driver_unregister+0x70/0xb0
[ +0.000008] platform_driver_unregister+0x20/0x2c
[ +0.000008] meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi]
[ +0.000012] __do_sys_delete_module+0x288/0x400
[ +0.000011] __arm64_sys_delete_module+0x5c/0x80
[ +0.000009] invoke_syscall+0x74/0x260
[ +0.000009] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000009] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000012] el0t_64_sync_handler+0x11c/0x150
[ +0.000008] el0t_64_sync+0x18c/0x190
[ +0.000018] Allocated by task 0:
[ +0.000007] (stack is not available)
[ +0.000011] Freed by task 2695:
[ +0.000008] kasan_save_stack+0x2c/0x5c
[ +0.000011] kasan_set_track+0x2c/0x40
[ +0.000008] kasan_set_free_info+0x28/0x50
[ +0.000009] ____kasan_slab_free+0x128/0x1d4
[ +0.000008] __kasan_slab_free+0x18/0x24
[ +0.000007] slab_free_freelist_hook+0x108/0x230
[ +0.000011] kfree+0x110/0x35c
[ +0.000008] release_nodes+0xf0/0x16c
[ +0.000009] devres_release_group+0x180/0x270
[ +0.000008] component_unbind+0x128/0x1e0
[ +0.000010] component_unbind_all+0x1b8/0x264
[ +0.000009] meson_drv_unbind+0x1a0/0x2ac [meson_drm]
[ +0.000025] take_down_aggregate_device+0xb0/0x160
[ +0.000009] component_del+0x18c/0x360
[ +0.000009] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[ +0.000012] platform_remove+0x64/0xb0
[ +0.000008] device_remove+0xb8/0x154
[ +0.000009] device_release_driver_internal+0x398/0x5b0
[ +0.000009] driver_detach+0xac/0x1b0
[ +0.000009] bus_remove_driver+0x158/0x29c
[ +0.000008] driver_unregister+0x70/0xb0
[ +0.000008] platform_driver_unregister+0x20/0x2c
[ +0.000008] meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi]
[ +0.000011] __do_sys_delete_module+0x288/0x400
[ +0.000010] __arm64_sys_delete_module+0x5c/0x80
[ +0.000008] invoke_syscall+0x74/0x260
[ +0.000008] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000008] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000009] el0t_64_sync_handler+0x11c/0x150
[ +0.000009] el0t_64_sync+0x18c/0x190
[ +0.000014] The buggy address belongs to the object at ffff000020c39000
---truncated--- |
| Horovod versions up to and including v0.28.1 are vulnerable to unauthenticated remote code execution. The vulnerability is due to improper handling of base64-encoded data in the `ElasticRendezvousHandler`, a subclass of `KVStoreHandler`. Specifically, the `_put_value` method in `ElasticRendezvousHandler` calls `codec.loads_base64(value)`, which eventually invokes `cloudpickle.loads(decoded)`. This allows an attacker to send a malicious pickle object via a PUT request, leading to arbitrary code execution on the server. |
