| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Do not skip unrelated mode changes in DSC validation
Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in
atomic check"), amdgpu resets the CRTC state mode_changed flag to false when
recomputing the DSC configuration results in no timing change for a particular
stream.
However, this is incorrect in scenarios where a change in MST/DSC configuration
happens in the same KMS commit as another (unrelated) mode change. For example,
the integrated panel of a laptop may be configured differently (e.g., HDR
enabled/disabled) depending on whether external screens are attached. In this
case, plugging in external DP-MST screens may result in the mode_changed flag
being dropped incorrectly for the integrated panel if its DSC configuration
did not change during precomputation in pre_validate_dsc().
At this point, however, dm_update_crtc_state() has already created new streams
for CRTCs with DSC-independent mode changes. In turn,
amdgpu_dm_commit_streams() will never release the old stream, resulting in a
memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to
the new stream either, which manifests as a use-after-free when the stream gets
disabled later on:
BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu]
Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977
Workqueue: events drm_mode_rmfb_work_fn
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xa0
print_address_description.constprop.0+0x88/0x320
? dc_stream_release+0x25/0x90 [amdgpu]
print_report+0xfc/0x1ff
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x225/0x4e0
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_report+0xe1/0x180
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_check_range+0x125/0x200
dc_stream_release+0x25/0x90 [amdgpu]
dc_state_destruct+0x14d/0x5c0 [amdgpu]
dc_state_release.part.0+0x4e/0x130 [amdgpu]
dm_atomic_destroy_state+0x3f/0x70 [amdgpu]
drm_atomic_state_default_clear+0x8ee/0xf30
? drm_mode_object_put.part.0+0xb1/0x130
__drm_atomic_state_free+0x15c/0x2d0
atomic_remove_fb+0x67e/0x980
Since there is no reliable way of figuring out whether a CRTC has unrelated
mode changes pending at the time of DSC validation, remember the value of the
mode_changed flag from before the point where a CRTC was marked as potentially
affected by a change in DSC configuration. Reset the mode_changed flag to this
earlier value instead in pre_validate_dsc().
(cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: replace hardcoded hdr2_len with offsetof() in smb2_calc_max_out_buf_len()
After this commit (e2b76ab8b5c9 "ksmbd: add support for read compound"),
response buffer management was changed to use dynamic iov array.
In the new design, smb2_calc_max_out_buf_len() expects the second
argument (hdr2_len) to be the offset of ->Buffer field in the
response structure, not a hardcoded magic number.
Fix the remaining call sites to use the correct offsetof() value. |
| In the Linux kernel, the following vulnerability has been resolved:
can: isotp: fix tx.buf use-after-free in isotp_sendmsg()
isotp_sendmsg() uses only cmpxchg() on so->tx.state to serialize access
to so->tx.buf. isotp_release() waits for ISOTP_IDLE via
wait_event_interruptible() and then calls kfree(so->tx.buf).
If a signal interrupts the wait_event_interruptible() inside close()
while tx.state is ISOTP_SENDING, the loop exits early and release
proceeds to force ISOTP_SHUTDOWN and continues to kfree(so->tx.buf)
while sendmsg may still be reading so->tx.buf for the final CAN frame
in isotp_fill_dataframe().
The so->tx.buf can be allocated once when the standard tx.buf length needs
to be extended. Move the kfree() of this potentially extended tx.buf to
sk_destruct time when either isotp_sendmsg() and isotp_release() are done. |
| In the Linux kernel, the following vulnerability has been resolved:
virt: tdx-guest: Fix handling of host controlled 'quote' buffer length
Validate host controlled value `quote_buf->out_len` that determines how
many bytes of the quote are copied out to guest userspace. In TDX
environments with remote attestation, quotes are not considered private,
and can be forwarded to an attestation server.
Catch scenarios where the host specifies a response length larger than
the guest's allocation, or otherwise races modifying the response while
the guest consumes it.
This prevents contents beyond the pages allocated for `quote_buf`
(up to TSM_REPORT_OUTBLOB_MAX) from being read out to guest userspace,
and possibly forwarded in attestation requests.
Recall that some deployments want per-container configs-tsm-report
interfaces, so the leak may cross container protection boundaries, not
just local root. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false
A UAF issue occurs when the virtio_net driver is configured with napi_tx=N
and the device's IFF_XMIT_DST_RELEASE flag is cleared
(e.g., during the configuration of tc route filter rules).
When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack
expects the driver to hold the reference to skb->dst until the packet
is fully transmitted and freed. In virtio_net with napi_tx=N,
skbs may remain in the virtio transmit ring for an extended period.
If the network namespace is destroyed while these skbs are still pending,
the corresponding dst_ops structure has freed. When a subsequent packet
is transmitted, free_old_xmit() is triggered to clean up old skbs.
It then calls dst_release() on the skb associated with the stale dst_entry.
Since the dst_ops (referenced by the dst_entry) has already been freed,
a UAF kernel paging request occurs.
fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release
the dst reference before the skb is queued in virtio_net.
Call Trace:
Unable to handle kernel paging request at virtual address ffff80007e150000
CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT
...
percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P)
dst_release+0xe0/0x110 net/core/dst.c:177
skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177
sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255
dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469
napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527
__free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net]
free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net]
start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net]
...
Reproduction Steps:
NETDEV="enp3s0"
config_qdisc_route_filter() {
tc qdisc del dev $NETDEV root
tc qdisc add dev $NETDEV root handle 1: prio
tc filter add dev $NETDEV parent 1:0 \
protocol ip prio 100 route to 100 flowid 1:1
ip route add 192.168.1.100/32 dev $NETDEV realm 100
}
test_ns() {
ip netns add testns
ip link set $NETDEV netns testns
ip netns exec testns ifconfig $NETDEV 10.0.32.46/24
ip netns exec testns ping -c 1 10.0.32.1
ip netns del testns
}
config_qdisc_route_filter
test_ns
sleep 2
test_ns |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Fix double free in dma-buf feature
The error path through vfio_pci_core_feature_dma_buf() ignores its
own advice to only use dma_buf_put() after dma_buf_export(), instead
falling through the entire unwind chain. In the unlikely event that
we encounter file descriptor exhaustion, this can result in an
unbalanced refcount on the vfio device and double free of allocated
objects.
Avoid this by moving the "put" directly into the error path and return
the errno rather than entering the unwind chain. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ibmvfc: Fix OOB access in ibmvfc_discover_targets_done()
A malicious or compromised VIO server can return a num_written value in the
discover targets MAD response that exceeds max_targets. This value is
stored directly in vhost->num_targets without validation, and is then used
as the loop bound in ibmvfc_alloc_targets() to index into disc_buf[], which
is only allocated for max_targets entries. Indices at or beyond max_targets
access kernel memory outside the DMA-coherent allocation. The
out-of-bounds data is subsequently embedded in Implicit Logout and PLOGI
MADs that are sent back to the VIO server, leaking kernel memory.
Fix by clamping num_written to max_targets before storing it. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: save ailp before dropping the AIL lock in push callbacks
In xfs_inode_item_push() and xfs_qm_dquot_logitem_push(), the AIL lock
is dropped to perform buffer IO. Once the cluster buffer no longer
protects the log item from reclaim, the log item may be freed by
background reclaim or the dquot shrinker. The subsequent spin_lock()
call dereferences lip->li_ailp, which is a use-after-free.
Fix this by saving the ailp pointer in a local variable while the AIL
lock is held and the log item is guaranteed to be valid. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate p_idx bounds in ext4_ext_correct_indexes
ext4_ext_correct_indexes() walks up the extent tree correcting
index entries when the first extent in a leaf is modified. Before
accessing path[k].p_idx->ei_block, there is no validation that
p_idx falls within the valid range of index entries for that
level.
If the on-disk extent header contains a corrupted or crafted
eh_entries value, p_idx can point past the end of the allocated
buffer, causing a slab-out-of-bounds read.
Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at
both access sites: before the while loop and inside it. Return
-EFSCORRUPTED if the index pointer is out of range, consistent
with how other bounds violations are handled in the ext4 extent
tree code. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid infinite loops caused by residual data
On the mkdir/mknod path, when mapping logical blocks to physical blocks,
if inserting a new extent into the extent tree fails (in this example,
because the file system disabled the huge file feature when marking the
inode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to
reclaim the physical block without deleting the corresponding data in
the extent tree. This causes subsequent mkdir operations to reference
the previously reclaimed physical block number again, even though this
physical block is already being used by the xattr block. Therefore, a
situation arises where both the directory and xattr are using the same
buffer head block in memory simultaneously.
The above causes ext4_xattr_block_set() to enter an infinite loop about
"inserted" and cannot release the inode lock, ultimately leading to the
143s blocking problem mentioned in [1].
If the metadata is corrupted, then trying to remove some extent space
can do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE
was passed, remove space wrongly update quota information.
Jan Kara suggests distinguishing between two cases:
1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully
consistent and we must maintain its consistency including all the
accounting. However these errors can happen only early before we've
inserted the extent into the extent tree. So current code works correctly
for this case.
2) Some other error - this means metadata is corrupted. We should strive to
do as few modifications as possible to limit damage. So I'd just skip
freeing of allocated blocks.
[1]
INFO: task syz.0.17:5995 blocked for more than 143 seconds.
Call Trace:
inode_lock_nested include/linux/fs.h:1073 [inline]
__start_dirop fs/namei.c:2923 [inline]
start_dirop fs/namei.c:2934 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix use-after-free in update_super_work when racing with umount
Commit b98535d09179 ("ext4: fix bug_on in start_this_handle during umount
filesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_work
to prevent new error work from being queued via /proc/fs/ext4/xx/mb_groups
reads during unmount. However, this introduced a use-after-free because
update_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() which
accesses the kobject's kernfs_node after it has been freed by kobject_del()
in ext4_unregister_sysfs():
update_super_work ext4_put_super
----------------- --------------
ext4_unregister_sysfs(sb)
kobject_del(&sbi->s_kobj)
__kobject_del()
sysfs_remove_dir()
kobj->sd = NULL
sysfs_put(sd)
kernfs_put() // RCU free
ext4_notify_error_sysfs(sbi)
sysfs_notify(&sbi->s_kobj)
kn = kobj->sd // stale pointer
kernfs_get(kn) // UAF on freed kernfs_node
ext4_journal_destroy()
flush_work(&sbi->s_sb_upd_work)
Instead of reordering the teardown sequence, fix this by making
ext4_notify_error_sysfs() detect that sysfs has already been torn down
by checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() call
in that case. A dedicated mutex (s_error_notify_mutex) serializes
ext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs()
to prevent TOCTOU races where the kobject could be deleted between the
state_in_sysfs check and the sysfs_notify() call. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: EC: clean up handlers on probe failure in acpi_ec_setup()
When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware
platforms, it has already started the EC and installed the address
space handler with the struct acpi_ec pointer as handler context.
However, acpi_ec_setup() propagates the error without any cleanup.
The caller acpi_ec_add() then frees the struct acpi_ec for non-boot
instances, leaving a dangling handler context in ACPICA.
Any subsequent AML evaluation that accesses an EC OpRegion field
dispatches into acpi_ec_space_handler() with the freed pointer,
causing a use-after-free:
BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289)
Write of size 8 at addr ffff88800721de38 by task init/1
Call Trace:
<TASK>
mutex_lock (kernel/locking/mutex.c:289)
acpi_ec_space_handler (drivers/acpi/ec.c:1362)
acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293)
acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246)
acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509)
acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700)
acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327)
acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392)
</TASK>
Allocated by task 1:
acpi_ec_alloc (drivers/acpi/ec.c:1424)
acpi_ec_add (drivers/acpi/ec.c:1692)
Freed by task 1:
kfree (mm/slub.c:6876)
acpi_ec_add (drivers/acpi/ec.c:1751)
The bug triggers on reduced-hardware EC platforms (ec->gpe < 0)
when the GPIO IRQ provider defers probing. Once the stale handler
exists, any unprivileged sysfs read that causes AML to touch an
EC OpRegion (battery, thermal, backlight) exercises the dangling
pointer.
Fix this by calling ec_remove_handlers() in the error path of
acpi_ec_setup() before clearing first_ec. ec_remove_handlers()
checks each EC_FLAGS_* bit before acting, so it is safe to call
regardless of how far ec_install_handlers() progressed:
-ENODEV (handler not installed): only calls acpi_ec_stop()
-EPROBE_DEFER (handler installed): removes handler, stops EC |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SCO: Fix use-after-free in sco_recv_frame() due to missing sock_hold
sco_recv_frame() reads conn->sk under sco_conn_lock() but immediately
releases the lock without holding a reference to the socket. A concurrent
close() can free the socket between the lock release and the subsequent
sk->sk_state access, resulting in a use-after-free.
Other functions in the same file (sco_sock_timeout(), sco_conn_del())
correctly use sco_sock_hold() to safely hold a reference under the lock.
Fix by using sco_sock_hold() to take a reference before releasing the
lock, and adding sock_put() on all exit paths. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: add missing netlink policy validations
Hyunwoo Kim reports out-of-bounds access in sctp and ctnetlink.
These attributes are used by the kernel without any validation.
Extend the netlink policies accordingly.
Quoting the reporter:
nlattr_to_sctp() assigns the user-supplied CTA_PROTOINFO_SCTP_STATE
value directly to ct->proto.sctp.state without checking that it is
within the valid range. [..]
and: ... with exp->dir = 100, the access at
ct->master->tuplehash[100] reads 5600 bytes past the start of a
320-byte nf_conn object, causing a slab-out-of-bounds read confirmed by
UBSAN. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate L2CAP_INFO_RSP payload length before access
l2cap_information_rsp() checks that cmd_len covers the fixed
l2cap_info_rsp header (type + result, 4 bytes) but then reads
rsp->data without verifying that the payload is present:
- L2CAP_IT_FEAT_MASK calls get_unaligned_le32(rsp->data), which reads
4 bytes past the header (needs cmd_len >= 8).
- L2CAP_IT_FIXED_CHAN reads rsp->data[0], 1 byte past the header
(needs cmd_len >= 5).
A truncated L2CAP_INFO_RSP with result == L2CAP_IR_SUCCESS triggers an
out-of-bounds read of adjacent skb data.
Guard each data access with the required payload length check. If the
payload is too short, skip the read and let the state machine complete
with safe defaults (feat_mask and remote_fixed_chan remain zero from
kzalloc), so the info timer cleanup and l2cap_conn_start() still run
and the connection is not stalled. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fix use-after-free on controller registration failure
Make sure to deregister from driver core also in the unlikely event that
per-cpu statistics allocation fails during controller registration to
avoid use-after-free (of driver resources) and unclocked register
accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HIDP: Fix possible UAF
This fixes the following trace caused by not dropping l2cap_conn
reference when user->remove callback is called:
[ 97.809249] l2cap_conn_free: freeing conn ffff88810a171c00
[ 97.809907] CPU: 1 UID: 0 PID: 1419 Comm: repro_standalon Not tainted 7.0.0-rc1-dirty #14 PREEMPT(lazy)
[ 97.809935] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 97.809947] Call Trace:
[ 97.809954] <TASK>
[ 97.809961] dump_stack_lvl (lib/dump_stack.c:122)
[ 97.809990] l2cap_conn_free (net/bluetooth/l2cap_core.c:1808)
[ 97.810017] l2cap_conn_del (./include/linux/kref.h:66 net/bluetooth/l2cap_core.c:1821 net/bluetooth/l2cap_core.c:1798)
[ 97.810055] l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7347 (discriminator 1) net/bluetooth/l2cap_core.c:7340 (discriminator 1))
[ 97.810086] ? __pfx_l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7341)
[ 97.810117] hci_conn_hash_flush (./include/net/bluetooth/hci_core.h:2152 (discriminator 2) net/bluetooth/hci_conn.c:2644 (discriminator 2))
[ 97.810148] hci_dev_close_sync (net/bluetooth/hci_sync.c:5360)
[ 97.810180] ? __pfx_hci_dev_close_sync (net/bluetooth/hci_sync.c:5285)
[ 97.810212] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810242] ? up_write (./arch/x86/include/asm/atomic64_64.h:87 (discriminator 5) ./include/linux/atomic/atomic-arch-fallback.h:2852 (discriminator 5) ./include/linux/atomic/atomic-long.h:268 (discriminator 5) ./include/linux/atomic/atomic-instrumented.h:3391 (discriminator 5) kernel/locking/rwsem.c:1385 (discriminator 5) kernel/locking/rwsem.c:1643 (discriminator 5))
[ 97.810267] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810290] ? rcu_is_watching (./arch/x86/include/asm/atomic.h:23 ./include/linux/atomic/atomic-arch-fallback.h:457 ./include/linux/context_tracking.h:128 kernel/rcu/tree.c:752)
[ 97.810320] hci_unregister_dev (net/bluetooth/hci_core.c:504 net/bluetooth/hci_core.c:2716)
[ 97.810346] vhci_release (drivers/bluetooth/hci_vhci.c:691)
[ 97.810375] ? __pfx_vhci_release (drivers/bluetooth/hci_vhci.c:678)
[ 97.810404] __fput (fs/file_table.c:470)
[ 97.810430] task_work_run (kernel/task_work.c:235)
[ 97.810451] ? __pfx_task_work_run (kernel/task_work.c:201)
[ 97.810472] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810495] ? do_raw_spin_unlock (./include/asm-generic/qspinlock.h:128 (discriminator 5) kernel/locking/spinlock_debug.c:142 (discriminator 5))
[ 97.810527] do_exit (kernel/exit.c:972)
[ 97.810547] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810574] ? __pfx_do_exit (kernel/exit.c:897)
[ 97.810594] ? lock_acquire (kernel/locking/lockdep.c:470 (discriminator 6) kernel/locking/lockdep.c:5870 (discriminator 6) kernel/locking/lockdep.c:5825 (discriminator 6))
[ 97.810616] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810639] ? do_raw_spin_lock (kernel/locking/spinlock_debug.c:95 (discriminator 4) kernel/locking/spinlock_debug.c:118 (discriminator 4))
[ 97.810664] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810688] ? find_held_lock (kernel/locking/lockdep.c:5350 (discriminator 1))
[ 97.810721] do_group_exit (kernel/exit.c:1093)
[ 97.810745] get_signal (kernel/signal.c:3007 (discriminator 1))
[ 97.810772] ? security_file_permission (./arch/x86/include/asm/jump_label.h:37 security/security.c:2366)
[ 97.810803] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810826] ? vfs_read (fs/read_write.c:555)
[ 97.810854] ? __pfx_get_signal (kernel/signal.c:2800)
[ 97.810880] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810905] ? __pfx_vfs_read (fs/read_write.c:555)
[ 97.810932] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810960] arch_do_signal_or_restart (arch/
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: fix use-after-free in ctnetlink_dump_exp_ct()
ctnetlink_dump_exp_ct() stores a conntrack pointer in cb->data for the
netlink dump callback ctnetlink_exp_ct_dump_table(), but drops the
conntrack reference immediately after netlink_dump_start(). When the
dump spans multiple rounds, the second recvmsg() triggers the dump
callback which dereferences the now-freed conntrack via nfct_help(ct),
leading to a use-after-free on ct->ext.
The bug is that the netlink_dump_control has no .start or .done
callbacks to manage the conntrack reference across dump rounds. Other
dump functions in the same file (e.g. ctnetlink_get_conntrack) properly
use .start/.done callbacks for this purpose.
Fix this by adding .start and .done callbacks that hold and release the
conntrack reference for the duration of the dump, and move the
nfct_help() call after the cb->args[0] early-return check in the dump
callback to avoid dereferencing ct->ext unnecessarily.
BUG: KASAN: slab-use-after-free in ctnetlink_exp_ct_dump_table+0x4f/0x2e0
Read of size 8 at addr ffff88810597ebf0 by task ctnetlink_poc/133
CPU: 1 UID: 0 PID: 133 Comm: ctnetlink_poc Not tainted 7.0.0-rc2+ #3 PREEMPTLAZY
Call Trace:
<TASK>
ctnetlink_exp_ct_dump_table+0x4f/0x2e0
netlink_dump+0x333/0x880
netlink_recvmsg+0x3e2/0x4b0
? aa_sk_perm+0x184/0x450
sock_recvmsg+0xde/0xf0
Allocated by task 133:
kmem_cache_alloc_noprof+0x134/0x440
__nf_conntrack_alloc+0xa8/0x2b0
ctnetlink_create_conntrack+0xa1/0x900
ctnetlink_new_conntrack+0x3cf/0x7d0
nfnetlink_rcv_msg+0x48e/0x510
netlink_rcv_skb+0xc9/0x1f0
nfnetlink_rcv+0xdb/0x220
netlink_unicast+0x3ec/0x590
netlink_sendmsg+0x397/0x690
__sys_sendmsg+0xf4/0x180
Freed by task 0:
slab_free_after_rcu_debug+0xad/0x1e0
rcu_core+0x5c3/0x9c0 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_h323: fix OOB read in decode_int() CONS case
In decode_int(), the CONS case calls get_bits(bs, 2) to read a length
value, then calls get_uint(bs, len) without checking that len bytes
remain in the buffer. The existing boundary check only validates the
2 bits for get_bits(), not the subsequent 1-4 bytes that get_uint()
reads. This allows a malformed H.323/RAS packet to cause a 1-4 byte
slab-out-of-bounds read.
Add a boundary check for len bytes after get_bits() and before
get_uint(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_h323: check for zero length in DecodeQ931()
In DecodeQ931(), the UserUserIE code path reads a 16-bit length from
the packet, then decrements it by 1 to skip the protocol discriminator
byte before passing it to DecodeH323_UserInformation(). If the encoded
length is 0, the decrement wraps to -1, which is then passed as a
large value to the decoder, leading to an out-of-bounds read.
Add a check to ensure len is positive after the decrement. |
