| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mdio: unexport __init-annotated mdio_bus_init()
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
modpost used to detect it, but it has been broken for a decade.
Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.
There are two ways to fix it:
- Remove __init
- Remove EXPORT_SYMBOL
I chose the latter for this case because the only in-tree call-site,
drivers/net/phy/phy_device.c is never compiled as modular.
(CONFIG_PHYLIB is boolean) |
| In the Linux kernel, the following vulnerability has been resolved:
net: xfrm: unexport __init-annotated xfrm4_protocol_init()
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
modpost used to detect it, but it has been broken for a decade.
Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.
There are two ways to fix it:
- Remove __init
- Remove EXPORT_SYMBOL
I chose the latter for this case because the only in-tree call-site,
net/ipv4/xfrm4_policy.c is never compiled as modular.
(CONFIG_XFRM is boolean) |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: unexport __init-annotated seg6_hmac_init()
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
modpost used to detect it, but it has been broken for a decade.
Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.
There are two ways to fix it:
- Remove __init
- Remove EXPORT_SYMBOL
I chose the latter for this case because the caller (net/ipv6/seg6.c)
and the callee (net/ipv6/seg6_hmac.c) belong to the same module.
It seems an internal function call in ipv6.ko. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix bug_on in __es_tree_search
Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/extents_status.c:199!
[...]
RIP: 0010:ext4_es_end fs/ext4/extents_status.c:199 [inline]
RIP: 0010:__es_tree_search+0x1e0/0x260 fs/ext4/extents_status.c:217
[...]
Call Trace:
ext4_es_cache_extent+0x109/0x340 fs/ext4/extents_status.c:766
ext4_cache_extents+0x239/0x2e0 fs/ext4/extents.c:561
ext4_find_extent+0x6b7/0xa20 fs/ext4/extents.c:964
ext4_ext_map_blocks+0x16b/0x4b70 fs/ext4/extents.c:4384
ext4_map_blocks+0xe26/0x19f0 fs/ext4/inode.c:567
ext4_getblk+0x320/0x4c0 fs/ext4/inode.c:980
ext4_bread+0x2d/0x170 fs/ext4/inode.c:1031
ext4_quota_read+0x248/0x320 fs/ext4/super.c:6257
v2_read_header+0x78/0x110 fs/quota/quota_v2.c:63
v2_check_quota_file+0x76/0x230 fs/quota/quota_v2.c:82
vfs_load_quota_inode+0x5d1/0x1530 fs/quota/dquot.c:2368
dquot_enable+0x28a/0x330 fs/quota/dquot.c:2490
ext4_quota_enable fs/ext4/super.c:6137 [inline]
ext4_enable_quotas+0x5d7/0x960 fs/ext4/super.c:6163
ext4_fill_super+0xa7c9/0xdc00 fs/ext4/super.c:4754
mount_bdev+0x2e9/0x3b0 fs/super.c:1158
mount_fs+0x4b/0x1e4 fs/super.c:1261
[...]
==================================================================
Above issue may happen as follows:
-------------------------------------
ext4_fill_super
ext4_enable_quotas
ext4_quota_enable
ext4_iget
__ext4_iget
ext4_ext_check_inode
ext4_ext_check
__ext4_ext_check
ext4_valid_extent_entries
Check for overlapping extents does't take effect
dquot_enable
vfs_load_quota_inode
v2_check_quota_file
v2_read_header
ext4_quota_read
ext4_bread
ext4_getblk
ext4_map_blocks
ext4_ext_map_blocks
ext4_find_extent
ext4_cache_extents
ext4_es_cache_extent
ext4_es_cache_extent
__es_tree_search
ext4_es_end
BUG_ON(es->es_lblk + es->es_len < es->es_lblk)
The error ext4 extents is as follows:
0af3 0300 0400 0000 00000000 extent_header
00000000 0100 0000 12000000 extent1
00000000 0100 0000 18000000 extent2
02000000 0400 0000 14000000 extent3
In the ext4_valid_extent_entries function,
if prev is 0, no error is returned even if lblock<=prev.
This was intended to skip the check on the first extent, but
in the error image above, prev=0+1-1=0 when checking the second extent,
so even though lblock<=prev, the function does not return an error.
As a result, bug_ON occurs in __es_tree_search and the system panics.
To solve this problem, we only need to check that:
1. The lblock of the first extent is not less than 0.
2. The lblock of the next extent is not less than
the next block of the previous extent.
The same applies to extent_idx. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_owner: use strscpy() instead of strlcpy()
current->comm[] is not a string (no guarantee for a zero byte in it).
strlcpy(s1, s2, l) is calling strlen(s2), potentially
causing out-of-bound access, as reported by syzbot:
detected buffer overflow in __fortify_strlen
------------[ cut here ]------------
kernel BUG at lib/string_helpers.c:980!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 4087 Comm: dhcpcd-run-hooks Not tainted 5.18.0-rc3-syzkaller-01537-g20b87e7c29df #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:fortify_panic+0x18/0x1a lib/string_helpers.c:980
Code: 8c e8 c5 ba e1 fa e9 23 0f bf fa e8 0b 5d 8c f8 eb db 55 48 89 fd e8 e0 49 40 f8 48 89 ee 48 c7 c7 80 f5 26 8a e8 99 09 f1 ff <0f> 0b e8 ca 49 40 f8 48 8b 54 24 18 4c 89 f1 48 c7 c7 00 00 27 8a
RSP: 0018:ffffc900000074a8 EFLAGS: 00010286
RAX: 000000000000002c RBX: ffff88801226b728 RCX: 0000000000000000
RDX: ffff8880198e0000 RSI: ffffffff81600458 RDI: fffff52000000e87
RBP: ffffffff89da2aa0 R08: 000000000000002c R09: 0000000000000000
R10: ffffffff815fae2e R11: 0000000000000000 R12: ffff88801226b700
R13: ffff8880198e0830 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5876ad6ff8 CR3: 000000001a48c000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
Call Trace:
<IRQ>
__fortify_strlen include/linux/fortify-string.h:128 [inline]
strlcpy include/linux/fortify-string.h:143 [inline]
__set_page_owner_handle+0x2b1/0x3e0 mm/page_owner.c:171
__set_page_owner+0x3e/0x50 mm/page_owner.c:190
prep_new_page mm/page_alloc.c:2441 [inline]
get_page_from_freelist+0xba2/0x3e00 mm/page_alloc.c:4182
__alloc_pages+0x1b2/0x500 mm/page_alloc.c:5408
alloc_pages+0x1aa/0x310 mm/mempolicy.c:2272
alloc_slab_page mm/slub.c:1799 [inline]
allocate_slab+0x26c/0x3c0 mm/slub.c:1944
new_slab mm/slub.c:2004 [inline]
___slab_alloc+0x8df/0xf20 mm/slub.c:3005
__slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3092
slab_alloc_node mm/slub.c:3183 [inline]
slab_alloc mm/slub.c:3225 [inline]
__kmem_cache_alloc_lru mm/slub.c:3232 [inline]
kmem_cache_alloc+0x360/0x3b0 mm/slub.c:3242
dst_alloc+0x146/0x1f0 net/core/dst.c:92 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix lockdep splat in qdisc_tree_reduce_backlog()
qdisc_tree_reduce_backlog() is called with the qdisc lock held,
not RTNL.
We must use qdisc_lookup_rcu() instead of qdisc_lookup()
syzbot reported:
WARNING: suspicious RCU usage
6.1.74-syzkaller #0 Not tainted
-----------------------------
net/sched/sch_api.c:305 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by udevd/1142:
#0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:306 [inline]
#0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:747 [inline]
#0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: net_tx_action+0x64a/0x970 net/core/dev.c:5282
#1: ffff888171861108 (&sch->q.lock){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:350 [inline]
#1: ffff888171861108 (&sch->q.lock){+.-.}-{2:2}, at: net_tx_action+0x754/0x970 net/core/dev.c:5297
#2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:306 [inline]
#2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:747 [inline]
#2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: qdisc_tree_reduce_backlog+0x84/0x580 net/sched/sch_api.c:792
stack backtrace:
CPU: 1 PID: 1142 Comm: udevd Not tainted 6.1.74-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Call Trace:
<TASK>
[<ffffffff85b85f14>] __dump_stack lib/dump_stack.c:88 [inline]
[<ffffffff85b85f14>] dump_stack_lvl+0x1b1/0x28f lib/dump_stack.c:106
[<ffffffff85b86007>] dump_stack+0x15/0x1e lib/dump_stack.c:113
[<ffffffff81802299>] lockdep_rcu_suspicious+0x1b9/0x260 kernel/locking/lockdep.c:6592
[<ffffffff84f0054c>] qdisc_lookup+0xac/0x6f0 net/sched/sch_api.c:305
[<ffffffff84f037c3>] qdisc_tree_reduce_backlog+0x243/0x580 net/sched/sch_api.c:811
[<ffffffff84f5b78c>] pfifo_tail_enqueue+0x32c/0x4b0 net/sched/sch_fifo.c:51
[<ffffffff84fbcf63>] qdisc_enqueue include/net/sch_generic.h:833 [inline]
[<ffffffff84fbcf63>] netem_dequeue+0xeb3/0x15d0 net/sched/sch_netem.c:723
[<ffffffff84eecab9>] dequeue_skb net/sched/sch_generic.c:292 [inline]
[<ffffffff84eecab9>] qdisc_restart net/sched/sch_generic.c:397 [inline]
[<ffffffff84eecab9>] __qdisc_run+0x249/0x1e60 net/sched/sch_generic.c:415
[<ffffffff84d7aa96>] qdisc_run+0xd6/0x260 include/net/pkt_sched.h:125
[<ffffffff84d85d29>] net_tx_action+0x7c9/0x970 net/core/dev.c:5313
[<ffffffff85e002bd>] __do_softirq+0x2bd/0x9bd kernel/softirq.c:616
[<ffffffff81568bca>] invoke_softirq kernel/softirq.c:447 [inline]
[<ffffffff81568bca>] __irq_exit_rcu+0xca/0x230 kernel/softirq.c:700
[<ffffffff81568ae9>] irq_exit_rcu+0x9/0x20 kernel/softirq.c:712
[<ffffffff85b89f52>] sysvec_apic_timer_interrupt+0x42/0x90 arch/x86/kernel/apic/apic.c:1107
[<ffffffff85c00ccb>] asm_sysvec_apic_timer_interrupt+0x1b/0x20 arch/x86/include/asm/idtentry.h:656 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix potential sta-link leak
When a station is allocated, links are added but not
set to valid yet (e.g. during connection to an AP MLD),
we might remove the station without ever marking links
valid, and leak them. Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD
Commit 672365477ae8 ("x86/fpu: Update XFD state where required") and
commit 8bf26758ca96 ("x86/fpu: Add XFD state to fpstate") introduced a
per CPU variable xfd_state to keep the MSR_IA32_XFD value cached, in
order to avoid unnecessary writes to the MSR.
On CPU hotplug MSR_IA32_XFD is reset to the init_fpstate.xfd, which
wipes out any stale state. But the per CPU cached xfd value is not
reset, which brings them out of sync.
As a consequence a subsequent xfd_update_state() might fail to update
the MSR which in turn can result in XRSTOR raising a #NM in kernel
space, which crashes the kernel.
To fix this, introduce xfd_set_state() to write xfd_state together
with MSR_IA32_XFD, and use it in all places that set MSR_IA32_XFD. |
| In the Linux kernel, the following vulnerability has been resolved:
efi: fix panic in kdump kernel
Check if get_next_variable() is actually valid pointer before
calling it. In kdump kernel this method is set to NULL that causes
panic during the kexec-ed kernel boot.
Tested with QEMU and OVMF firmware. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix the warning division or modulo by zero
Checks the partition mode and returns an error for an invalid mode. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix kernel warning when sending SYN message
When sending a SYN message, this kernel stack trace is observed:
...
[ 13.396352] RIP: 0010:_copy_from_iter+0xb4/0x550
...
[ 13.398494] Call Trace:
[ 13.398630] <TASK>
[ 13.398630] ? __alloc_skb+0xed/0x1a0
[ 13.398630] tipc_msg_build+0x12c/0x670 [tipc]
[ 13.398630] ? shmem_add_to_page_cache.isra.71+0x151/0x290
[ 13.398630] __tipc_sendmsg+0x2d1/0x710 [tipc]
[ 13.398630] ? tipc_connect+0x1d9/0x230 [tipc]
[ 13.398630] ? __local_bh_enable_ip+0x37/0x80
[ 13.398630] tipc_connect+0x1d9/0x230 [tipc]
[ 13.398630] ? __sys_connect+0x9f/0xd0
[ 13.398630] __sys_connect+0x9f/0xd0
[ 13.398630] ? preempt_count_add+0x4d/0xa0
[ 13.398630] ? fpregs_assert_state_consistent+0x22/0x50
[ 13.398630] __x64_sys_connect+0x16/0x20
[ 13.398630] do_syscall_64+0x42/0x90
[ 13.398630] entry_SYSCALL_64_after_hwframe+0x63/0xcd
It is because commit a41dad905e5a ("iov_iter: saner checks for attempt
to copy to/from iterator") has introduced sanity check for copying
from/to iov iterator. Lacking of copy direction from the iterator
viewpoint would lead to kernel stack trace like above.
This commit fixes this issue by initializing the iov iterator with
the correct copy direction when sending SYN or ACK without data. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/tegra: rgb: Fix missing clk_put() in the error handling paths of tegra_dc_rgb_probe()
If clk_get_sys(..., "pll_d2_out0") fails, the clk_get_sys() call must be
undone.
Add the missing clk_put and a new 'put_pll_d_out0' label in the error
handling path, and use it. |
| In the Linux kernel, the following vulnerability has been resolved:
proc/vmcore: fix clearing user buffer by properly using clear_user()
To clear a user buffer we cannot simply use memset, we have to use
clear_user(). With a virtio-mem device that registers a vmcore_cb and
has some logically unplugged memory inside an added Linux memory block,
I can easily trigger a BUG by copying the vmcore via "cp":
systemd[1]: Starting Kdump Vmcore Save Service...
kdump[420]: Kdump is using the default log level(3).
kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/
kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/
kdump[465]: saving vmcore-dmesg.txt complete
kdump[467]: saving vmcore
BUG: unable to handle page fault for address: 00007f2374e01000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
PGD 7a523067 P4D 7a523067 PUD 7a528067 PMD 7a525067 PTE 800000007048f867
Oops: 0003 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014
RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86
Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81
RSP: 0018:ffffc9000073be08 EFLAGS: 00010212
RAX: 0000000000001000 RBX: 00000000002fd000 RCX: 00007f2374e01000
RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00007f2374e01008
RBP: 0000000000001000 R08: 0000000000000000 R09: ffffc9000073bc50
R10: ffffc9000073bc48 R11: ffffffff829461a8 R12: 000000000000f000
R13: 00007f2374e01000 R14: 0000000000000000 R15: ffff88807bd421e8
FS: 00007f2374e12140(0000) GS:ffff88807f000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2374e01000 CR3: 000000007a4aa000 CR4: 0000000000350eb0
Call Trace:
read_vmcore+0x236/0x2c0
proc_reg_read+0x55/0xa0
vfs_read+0x95/0x190
ksys_read+0x4f/0xc0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Some x86-64 CPUs have a CPU feature called "Supervisor Mode Access
Prevention (SMAP)", which is used to detect wrong access from the kernel
to user buffers like this: SMAP triggers a permissions violation on
wrong access. In the x86-64 variant of clear_user(), SMAP is properly
handled via clac()+stac().
To fix, properly use clear_user() when we're dealing with a user buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend
When the system is suspended while audio is active, the
sof_ipc4_pcm_hw_free() is invoked to reset the pipelines since during
suspend the DSP is turned off, streams will be re-started after resume.
If the firmware crashes during while audio is running (or when we reset
the stream before suspend) then the sof_ipc4_set_multi_pipeline_state()
will fail with IPC error and the state change is interrupted.
This will cause misalignment between the kernel and firmware state on next
DSP boot resulting errors returned by firmware for IPC messages, eventually
failing the audio resume.
On stream close the errors are ignored so the kernel state will be
corrected on the next DSP boot, so the second boot after the DSP panic.
If sof_ipc4_trigger_pipelines() is called from sof_ipc4_pcm_hw_free() then
state parameter is SOF_IPC4_PIPE_RESET and only in this case.
Treat a forced pipeline reset similarly to how we treat a pcm_free by
ignoring error on state sending to allow the kernel's state to be
consistent with the state the firmware will have after the next boot. |
| In the Linux kernel, the following vulnerability has been resolved:
md: Fix missing release of 'active_io' for flush
submit_flushes
atomic_set(&mddev->flush_pending, 1);
rdev_for_each_rcu(rdev, mddev)
atomic_inc(&mddev->flush_pending);
bi->bi_end_io = md_end_flush
submit_bio(bi);
/* flush io is done first */
md_end_flush
if (atomic_dec_and_test(&mddev->flush_pending))
percpu_ref_put(&mddev->active_io)
-> active_io is not released
if (atomic_dec_and_test(&mddev->flush_pending))
-> missing release of active_io
For consequence, mddev_suspend() will wait for 'active_io' to be zero
forever.
Fix this problem by releasing 'active_io' in submit_flushes() if
'flush_pending' is decreased to zero. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix DEBUG_LOCKS_WARN_ON(1) when dissolve_free_hugetlb_folio()
When I did memory failure tests recently, below warning occurs:
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 8 PID: 1011 at kernel/locking/lockdep.c:232 __lock_acquire+0xccb/0x1ca0
Modules linked in: mce_inject hwpoison_inject
CPU: 8 PID: 1011 Comm: bash Kdump: loaded Not tainted 6.9.0-rc3-next-20240410-00012-gdb69f219f4be #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
RIP: 0010:__lock_acquire+0xccb/0x1ca0
RSP: 0018:ffffa7a1c7fe3bd0 EFLAGS: 00000082
RAX: 0000000000000000 RBX: eb851eb853975fcf RCX: ffffa1ce5fc1c9c8
RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffffa1ce5fc1c9c0
RBP: ffffa1c6865d3280 R08: ffffffffb0f570a8 R09: 0000000000009ffb
R10: 0000000000000286 R11: ffffffffb0f2ad50 R12: ffffa1c6865d3d10
R13: ffffa1c6865d3c70 R14: 0000000000000000 R15: 0000000000000004
FS: 00007ff9f32aa740(0000) GS:ffffa1ce5fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff9f3134ba0 CR3: 00000008484e4000 CR4: 00000000000006f0
Call Trace:
<TASK>
lock_acquire+0xbe/0x2d0
_raw_spin_lock_irqsave+0x3a/0x60
hugepage_subpool_put_pages.part.0+0xe/0xc0
free_huge_folio+0x253/0x3f0
dissolve_free_huge_page+0x147/0x210
__page_handle_poison+0x9/0x70
memory_failure+0x4e6/0x8c0
hard_offline_page_store+0x55/0xa0
kernfs_fop_write_iter+0x12c/0x1d0
vfs_write+0x380/0x540
ksys_write+0x64/0xe0
do_syscall_64+0xbc/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff9f3114887
RSP: 002b:00007ffecbacb458 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007ff9f3114887
RDX: 000000000000000c RSI: 0000564494164e10 RDI: 0000000000000001
RBP: 0000564494164e10 R08: 00007ff9f31d1460 R09: 000000007fffffff
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c
R13: 00007ff9f321b780 R14: 00007ff9f3217600 R15: 00007ff9f3216a00
</TASK>
Kernel panic - not syncing: kernel: panic_on_warn set ...
CPU: 8 PID: 1011 Comm: bash Kdump: loaded Not tainted 6.9.0-rc3-next-20240410-00012-gdb69f219f4be #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
panic+0x326/0x350
check_panic_on_warn+0x4f/0x50
__warn+0x98/0x190
report_bug+0x18e/0x1a0
handle_bug+0x3d/0x70
exc_invalid_op+0x18/0x70
asm_exc_invalid_op+0x1a/0x20
RIP: 0010:__lock_acquire+0xccb/0x1ca0
RSP: 0018:ffffa7a1c7fe3bd0 EFLAGS: 00000082
RAX: 0000000000000000 RBX: eb851eb853975fcf RCX: ffffa1ce5fc1c9c8
RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffffa1ce5fc1c9c0
RBP: ffffa1c6865d3280 R08: ffffffffb0f570a8 R09: 0000000000009ffb
R10: 0000000000000286 R11: ffffffffb0f2ad50 R12: ffffa1c6865d3d10
R13: ffffa1c6865d3c70 R14: 0000000000000000 R15: 0000000000000004
lock_acquire+0xbe/0x2d0
_raw_spin_lock_irqsave+0x3a/0x60
hugepage_subpool_put_pages.part.0+0xe/0xc0
free_huge_folio+0x253/0x3f0
dissolve_free_huge_page+0x147/0x210
__page_handle_poison+0x9/0x70
memory_failure+0x4e6/0x8c0
hard_offline_page_store+0x55/0xa0
kernfs_fop_write_iter+0x12c/0x1d0
vfs_write+0x380/0x540
ksys_write+0x64/0xe0
do_syscall_64+0xbc/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff9f3114887
RSP: 002b:00007ffecbacb458 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007ff9f3114887
RDX: 000000000000000c RSI: 0000564494164e10 RDI: 0000000000000001
RBP: 0000564494164e10 R08: 00007ff9f31d1460 R09: 000000007fffffff
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c
R13: 00007ff9f321b780 R14: 00007ff9f3217600 R15: 00007ff9f3216a00
</TASK>
After git bisecting and digging into the code, I believe the root cause is
that _deferred_list field of folio is unioned with _hugetlb_subpool field.
In __update_and_free_hugetlb_folio(), folio->_deferred_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Unmap the surface before resetting it on a plane state
Switch to a new plane state requires unreferencing of all held surfaces.
In the work required for mob cursors the mapped surfaces started being
cached but the variable indicating whether the surface is currently
mapped was not being reset. This leads to crashes as the duplicated
state, incorrectly, indicates the that surface is mapped even when
no surface is present. That's because after unreferencing the surface
it's perfectly possible for the plane to be backed by a bo instead of a
surface.
Reset the surface mapped flag when unreferencing the plane state surface
to fix null derefs in cleanup. Fixes crashes in KDE KWin 6.0 on Wayland:
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 4 PID: 2533 Comm: kwin_wayland Not tainted 6.7.0-rc3-vmwgfx #2
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
RIP: 0010:vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx]
Code: 00 00 00 75 3a 48 83 c4 10 5b 5d c3 cc cc cc cc 48 8b b3 a8 00 00 00 48 c7 c7 99 90 43 c0 e8 93 c5 db ca 48 8b 83 a8 00 00 00 <48> 8b 78 28 e8 e3 f>
RSP: 0018:ffffb6b98216fa80 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff969d84cdcb00 RCX: 0000000000000027
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff969e75f21600
RBP: ffff969d4143dc50 R08: 0000000000000000 R09: ffffb6b98216f920
R10: 0000000000000003 R11: ffff969e7feb3b10 R12: 0000000000000000
R13: 0000000000000000 R14: 000000000000027b R15: ffff969d49c9fc00
FS: 00007f1e8f1b4180(0000) GS:ffff969e75f00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000028 CR3: 0000000104006004 CR4: 00000000003706f0
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? exc_page_fault+0x7f/0x180
? asm_exc_page_fault+0x26/0x30
? vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx]
drm_atomic_helper_cleanup_planes+0x9b/0xc0
commit_tail+0xd1/0x130
drm_atomic_helper_commit+0x11a/0x140
drm_atomic_commit+0x97/0xd0
? __pfx___drm_printfn_info+0x10/0x10
drm_atomic_helper_update_plane+0xf5/0x160
drm_mode_cursor_universal+0x10e/0x270
drm_mode_cursor_common+0x102/0x230
? __pfx_drm_mode_cursor2_ioctl+0x10/0x10
drm_ioctl_kernel+0xb2/0x110
drm_ioctl+0x26d/0x4b0
? __pfx_drm_mode_cursor2_ioctl+0x10/0x10
? __pfx_drm_ioctl+0x10/0x10
vmw_generic_ioctl+0xa4/0x110 [vmwgfx]
__x64_sys_ioctl+0x94/0xd0
do_syscall_64+0x61/0xe0
? __x64_sys_ioctl+0xaf/0xd0
? syscall_exit_to_user_mode+0x2b/0x40
? do_syscall_64+0x70/0xe0
? __x64_sys_ioctl+0xaf/0xd0
? syscall_exit_to_user_mode+0x2b/0x40
? do_syscall_64+0x70/0xe0
? exc_page_fault+0x7f/0x180
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x7f1e93f279ed
Code: 04 25 28 00 00 00 48 89 45 c8 31 c0 48 8d 45 10 c7 45 b0 10 00 00 00 48 89 45 b8 48 8d 45 d0 48 89 45 c0 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff f>
RSP: 002b:00007ffca0faf600 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000055db876ed2c0 RCX: 00007f1e93f279ed
RDX: 00007ffca0faf6c0 RSI: 00000000c02464bb RDI: 0000000000000015
RBP: 00007ffca0faf650 R08: 000055db87184010 R09: 0000000000000007
R10: 000055db886471a0 R11: 0000000000000246 R12: 00007ffca0faf6c0
R13: 00000000c02464bb R14: 0000000000000015 R15: 00007ffca0faf790
</TASK>
Modules linked in: snd_seq_dummy snd_hrtimer nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_ine>
CR2: 0000000000000028
---[ end trace 0000000000000000 ]---
RIP: 0010:vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx]
Code: 00 00 00 75 3a 48 83 c4 10 5b 5d c3 cc cc cc cc 48 8b b3 a8 00 00 00 48 c7 c7 99 90 43 c0 e8 93 c5 db ca 48 8b 83 a8 00 00 00 <48> 8b 78 28 e8 e3 f>
RSP: 0018:ffffb6b98216fa80 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff969d84cdcb00 RCX: 0000000000000027
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff969e75f21600
RBP: ffff969d4143
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address
Read from an unsafe address with copy_from_kernel_nofault() in
arch_adjust_kprobe_addr() because this function is used before checking
the address is in text or not. Syzcaller bot found a bug and reported
the case if user specifies inaccessible data area,
arch_adjust_kprobe_addr() will cause a kernel panic.
[ mingo: Clarified the comment. ] |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9359/1: flush: check if the folio is reserved for no-mapping addresses
Since commit a4d5613c4dc6 ("arm: extend pfn_valid to take into account
freed memory map alignment") changes the semantics of pfn_valid() to check
presence of the memory map for a PFN. A valid page for an address which
is reserved but not mapped by the kernel[1], the system crashed during
some uio test with the following memory layout:
node 0: [mem 0x00000000c0a00000-0x00000000cc8fffff]
node 0: [mem 0x00000000d0000000-0x00000000da1fffff]
the uio layout is：0xc0900000, 0x100000
the crash backtrace like:
Unable to handle kernel paging request at virtual address bff00000
[...]
CPU: 1 PID: 465 Comm: startapp.bin Tainted: G O 5.10.0 #1
Hardware name: Generic DT based system
PC is at b15_flush_kern_dcache_area+0x24/0x3c
LR is at __sync_icache_dcache+0x6c/0x98
[...]
(b15_flush_kern_dcache_area) from (__sync_icache_dcache+0x6c/0x98)
(__sync_icache_dcache) from (set_pte_at+0x28/0x54)
(set_pte_at) from (remap_pfn_range+0x1a0/0x274)
(remap_pfn_range) from (uio_mmap+0x184/0x1b8 [uio])
(uio_mmap [uio]) from (__mmap_region+0x264/0x5f4)
(__mmap_region) from (__do_mmap_mm+0x3ec/0x440)
(__do_mmap_mm) from (do_mmap+0x50/0x58)
(do_mmap) from (vm_mmap_pgoff+0xfc/0x188)
(vm_mmap_pgoff) from (ksys_mmap_pgoff+0xac/0xc4)
(ksys_mmap_pgoff) from (ret_fast_syscall+0x0/0x5c)
Code: e0801001 e2423001 e1c00003 f57ff04f (ee070f3e)
---[ end trace 09cf0734c3805d52 ]---
Kernel panic - not syncing: Fatal exception
So check if PG_reserved was set to solve this issue.
[1]: https://lore.kernel.org/lkml/Zbtdue57RO0QScJM@linux.ibm.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix off by one in qla_edif_app_getstats()
The app_reply->elem[] array is allocated earlier in this function and it
has app_req.num_ports elements. Thus this > comparison needs to be >= to
prevent memory corruption. |
