| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An authentication bypass vulnerability in the web-based management interface of AOS-10 could allow an unauthenticated adjacent attacker to circumvent existing authentication controls and run arbitrary commands on the underlying host if certain preconditions outside of the attacker's control are met. Successful exploitation of this vulnerability could allow an attacker to execute arbitrary commands on the underlying operating system. |
| An authentication bypass in the PAPI protocol of AOS-10 allows an unauthenticated adjacent attacker to circumvent existing authentication controls. Successful exploitation allows an attacker to change the state of certain settings of a vulnerable system. |
| An arbitrary file deletion vulnerability exists in the command line interface of AOS-10 that could allow an authenticated attacker with administrative privileges to cause a denial of service. Successful exploitation could allow an attacker to crash the system, preventing it from rebooting without manual intervention and disrupting normal operation of the affected device. |
| The aBlocks – Gutenberg Blocks, User Dashboard Builder, Popup Builder, Form Builder & Animation Builder plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 2.17.0 via the `/ablocks/v1/form-builder/registration` REST endpoint. The vulnerability exists because the endpoint is registered with `permission_callback => __return_true` and the `register()` handler reads `roleSlug` directly from attacker-controlled block attributes in `post_content` without ever verifying that the block's `formType` is `registration` — a condition that `RegistrationFormSanitizer::verify()` imposes only at save-time, meaning a Contributor can preserve an arbitrary `roleSlug` by saving a block with `formType='login'` and then triggering the endpoint via a valid `wp_rest` nonce and post-ownership check. This makes it possible for authenticated attackers, with Contributor-level access and above, to escalate their WordPress role to Editor or any other non-administrator role and receive a fully authenticated session at the elevated privilege level via `WP_User::set_role()` and `wp_set_auth_cookie()`. Escalation is bounded below administrator-tier roles because `is_safe_registration_role()` rejects any role holding `manage_options`, `edit_users`, `delete_users`, `create_users`, `promote_users`, or `edit_theme_options`, meaning the highest practically reachable role on a standard WordPress installation is Editor. |
| A flaw has been found in openbq-org OpenBB up to 4.7.2/5.0.0. This affects an unknown part of the file openbb_platform/core/openbb_core/app/model/api_settings.py of the component Local API Server. This manipulation causes improper access controls. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in DeepSeek Harness up to 0.2.0-rc.2. This issue affects some unknown processing of the file packages/client/connection/src/browser-auth.ts of the component Browser Auth. This manipulation causes improper authorization. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Datawiza Proxy Auth Plugin WordPress plugin before 1.1.1 does not verify that the user-identity and role HTTP request headers it trusts originate from a trusted reverse proxy, allowing unauthenticated attackers to create and authenticate as a WordPress administrator. |
| The Duplicator WordPress plugin before 5.0.0 does not restrict its one-click upgrade routine to users allowed to install Duplicator WordPress plugin before 5.0.0, and additionally exposes the routine without authentication, allowing an administrator of a multisite child site who is not a network administrator to install and run arbitrary PHP in the network-wide shared Duplicator WordPress plugin before 5.0.0 directory. |
| Incorrect Privilege Assignment vulnerability in Kodezen LLC aBlocks ablocks allows Privilege Escalation.This issue affects aBlocks: from n/a before 2.9.1. |
| Vulnerability in the Oracle Payments product of Oracle E-Business Suite (component: File Transmission). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Payments. Successful attacks of this vulnerability can result in takeover of Oracle Payments. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). |
| LiteSpeed User-End cPanel Plugin before 2.4.5 allows privilege escalation (possibly to root), as exploited in the wild in May 2026. Detection is best done via a command line of grep -rE "cpanel_jsonapi_func=redisAble" /var/cpanel/logs /usr/local/cpanel/logs/ 2>/dev/null in Bash. If you get no output, you have not been hit with exploitation of the vulnerability. If there is output, we recommend you examine the IP addresses in the list, determine if they are valid IP addresses, and if not, block them. To determine damage done, examine the system logs for use by the detected IP addresses. The issue is related to mishandling of Redis enable/disable features. The recommended minimum version is 2.4.7. |
| The Divi Membership plugin for WordPress is vulnerable to Privilege Escalation in versions up to, and including, 2.2.0. This is due to the `dmem_form_submit_handler()` function determining the new user's role by iterating all WordPress roles and calling `password_verify()` against an attacker-controlled bcrypt hash supplied in the `form_id` POST parameter, with no validation or whitelist of allowed roles. This makes it possible for unauthenticated attackers to register a new account with the administrator role by submitting a locally computed bcrypt hash of `administrator` as `form_id`, and when `auto_login=on` is submitted, be immediately authenticated as that administrator in the same request, resulting in full site takeover. Exploitation requires a WordPress nonce, but that nonce is publicly emitted on any page rendering the Divi Membership registration form and is therefore obtainable by any unauthenticated visitor. |
| Incorrect Privilege Assignment vulnerability in Ultimate Member Ultimate Member ultimate-member allows Privilege Escalation.This issue affects Ultimate Member: from n/a through 2.13.1. |
| The Redux Framework plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 4.5.11. This is due to the plugin saving arbitrary meta keys under a registered option name without sufficient capability checks or key allowlist / restrictions. This makes it possible for authenticated attackers, with Subscriber-level access and above, to set an arbitrary role (e.g., Administrator) when performing a profile update if a plugin or theme using this framework has added at least one user profile field that leverages Redux_Users::set_profile/set_section/set_field. |
| Vulnerability in the RDBMS component of Oracle Database Server. Supported versions that are affected are 23.4.0-23.26.3. Easily exploitable vulnerability allows low privileged attacker having DBMS_VECTOR privilege with network access via Oracle Net to compromise RDBMS. Successful attacks of this vulnerability can result in takeover of RDBMS. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Oracle HTTP Server product of Oracle Fusion Middleware (component: Web Listener). The supported version that is affected is 12.2.1.4.0. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle HTTP Server executes to compromise Oracle HTTP Server. Successful attacks of this vulnerability can result in takeover of Oracle HTTP Server. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Oracle HTTP Server product of Oracle Fusion Middleware (component: OSSL Module). The supported version that is affected is 12.2.1.4.0. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle HTTP Server executes to compromise Oracle HTTP Server. Successful attacks of this vulnerability can result in takeover of Oracle HTTP Server. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| A vulnerability was detected in HarnessRouter up to 0.31.10. This affects an unknown function of the file gateway/app.py of the component Identity Mode. Performing a manipulation of the argument X-Harness-Org/X-Harness-Member results in improper authorization. The attack is possible to be carried out remotely. The attack is considered to have high complexity. The exploitability is reported as difficult. Upgrading to version 0.31.11 mitigates this issue. The patch is named 48a26cdf9c4544d2c88d1a07f0777f063f1d753f. The affected component should be upgraded. |
| The User Profile Builder WordPress plugin before 4.0.5 does not verify that a user is authorized to edit the specific account selected on its front-end Edit Profile form, allowing an Administrator of a Multisite subsite to change any other user's account email, including a Network Super Admin's, and take over that account through the password-reset flow. |
| The Advanced Custom Fields: Extended WordPress plugin before 0.9.2.8, Advanced Custom Fields: Extended PRO WordPress plugin before 0.9.2.8 does not resolve the target of the update-user action in its front-end Forms module consistently between the stage that authorises the request and the stage that carries it out, which allows unauthenticated visitors to bypass the guard protecting administrator accounts, take over the site administrator's account and be issued a valid session for it. Exploitation requires the site to publish two separate front-end form configurations whose targets are mapped to visitor-submitted values. |
