| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw has been found in COMFAST CF-N1-S 2.6.0.1. This impacts the function sub_44B438 of the file /cgi-bin/mbox-config?method=SET§ion=ptest_ssid of the component CGI Interface. This manipulation of the argument ssid causes os command injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. |
| A security vulnerability has been detected in GL.iNet BE9300 and MT6000 4.8.x. This vulnerability affects unknown code of the component Firewall-management RPC. The manipulation of the argument dest_port/dest_ip leads to os command injection. The attack may be initiated remotely. Upgrading to version 4.9.0 is able to resolve this issue. The affected component should be upgraded. The vendor explains: "After our investigation, we have confirmed that the vulnerability described (...) does indeed exist." |
| A flaw has been found in Edimax EW-7478APC 1.04. Affected by this vulnerability is the function setWAN of the file /goform/setWAN. Executing a manipulation of the argument pppUserName/pptpUserName/L2TPUserName can lead to command injection. The attack may be performed from remote. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: topology: fix memory leak in snd_sof_load_topology
When the topology filename contains "dummy" and tplg_cnt is 0, the
function returns -EINVAL directly without freeing the tplg_files
allocated by kcalloc() at line 2497. This leaks memory on every
such topology load attempt.
Fix this by setting ret = -EINVAL and jumping to the out: label,
which already handles the kfree(tplg_files) cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: uvesafb: fix potential memory leak in uvesafb_probe()
Due to an incorrect goto label, memory allocated for modedb and modelist
in uvesafb_vbe_init() is not freed in some error paths. Fix this by
updating the goto label. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix missing credit release on failure in cifs_issue_read()
Fix missing release of credits in the failure path in cifs_issue_read()
lest retrying the subreq just overwrites the credits value. |
| In the Linux kernel, the following vulnerability has been resolved:
lockd: Plug nlm_file refcount leak on cached nlm_do_fopen() failure
The cached-file path in nlm_lookup_file() reaches the found: label
unconditionally, even when nlm_do_fopen() fails. At that label
*result and file->f_count are updated before the error is returned.
The wrappers nlm3svc_lookup_file() and nlm4svc_lookup_file() then
bail out of their switch without copying *result back to their
caller, so the proc handler's local nlm_file pointer remains NULL
and the cleanup path skips nlm_release_file(). The f_count
increment is never released, and nlm_traverse_files() can no
longer reap the file because its refcount never returns to zero
between requests.
Short-circuit the cached path so neither *result nor f_count is
touched when nlm_do_fopen() fails on a hashed nlm_file. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: avoid request storms during pending request
batadv_send_tt_request() allocates a tt_req_node when none exists for the
destination originator node. This should prevent that a multiple TT
requests are send at the same time to an originator.
But if allocation of the send buffer failed, this request must be cleaned
up again. But indicator for such a failure is "ret == false". But the
actual implementation is checking for "ret == true".
The check must be inverted to not loose the information about the TT
request directly after it was attempted to be sent out. This should avoid
potential request storms. |
| An authenticated administrator is able to crash Zabbix server or proxy by creating specifically crafted preprocessing/script item JavaScript scripts, leading to potential denial of service. |
| Scriban versions 3.0.0 through 7.2.0 contain a denial of service vulnerability in the array multiplication operator that allocates memory without enforcing LoopLimit or overflow-safe arithmetic checks. Attackers can supply a large integer multiplier in a template to force multi-gigabyte memory allocations, causing resource exhaustion and availability degradation. |
| Improper neutralization of special elements used in a command ('command injection') in Microsoft PowerShell allows an authorized attacker to execute code locally. |
| vLLM is an inference and serving engine for large language models. Prior to 0.26.0, the /v1/completions/derender and /v1/chat/completions/derender endpoints accept caller-supplied GenerateResponse objects whose generate_responses, choices, token_ids, prompt_logprobs, logprobs.content, top_logprobs, and routed_experts structures are processed by OnlineDerenderer and tokenizer.decode before max_model_len, max_tokens, max_num_seqs, or response-size limits are enforced, allowing an authenticated API client to consume excessive CPU and memory and produce oversized responses. This issue is fixed in version 0.26.0. |
| In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: fix BAR resource leak on PF number failure
If cn23xx_get_pf_num() fails, the function returns without
unmapping either BAR. Unmap both BARs before returning from
the error path.
Found by manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
bnx2x: fix potential memory leak in bnx2x_alloc_mem_bp()
If the allocation of fp[i].tpa_info fails, the error path will not free
the struct bnx2x_fastpath allocated earlier, as it is not linked to the
bp structure yet. Fix that by linking it immediately after allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix memory leak in ieee80211_register_hw()
If kmemdup() fails while copying supported band structures, the error
path jumps to fail_rate. This skips rate_control_deinitialize() and
leaks the initialized local->rate_ctrl.
Fix this by adding a fail_band label that shares the rate-control cleanup
path before falling through to the remaining teardown.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
suitable mac80211 device/driver combination to test with, no runtime
testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: HWS, fix matcher leak on resize target setup failure
hws_bwc_matcher_move() allocates a replacement matcher before setting it
as the resize target. If mlx5hws_matcher_resize_set_target() fails, the
replacement matcher is not attached anywhere and is leaked.
Fix the leak by destroying the replacement matcher before returning from
the resize-target failure path.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
mlx5 HWS-capable device to test with, no runtime testing was able to be
performed. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: ca8210: fix cas_ctl leak on spi_async failure
ca8210_spi_transfer() allocates cas_ctl with kzalloc_obj(GFP_ATOMIC)
and relies entirely on the SPI completion callback
ca8210_spi_transfer_complete() to free it.
The spi_async() API only invokes the completion callback on successful
submission. On failure it returns a negative error code without ever
queuing the callback, which leaves cas_ctl and its embedded spi_message
and spi_transfer orphaned. Every kfree(cas_ctl) in the driver is
inside the completion callback, so there is no other reclamation path.
ca8210_spi_transfer() is called from ca8210_spi_exchange(), the
interrupt handler ca8210_interrupt_handler(), and from the retry path
inside the completion callback itself. The exchange and interrupt
handler paths loop on -EBUSY, so under sustained SPI bus contention
every retry iteration leaks a fresh cas_ctl (~600 bytes per
occurrence).
Fix it by freeing cas_ctl on the spi_async() error path. While here,
correct the misleading error string: the function calls spi_async(),
not spi_sync(). |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Free BPID bitmap on setup failure
nix_setup_bpids() allocates bp->bpids with rvu_alloc_bitmap(), which uses
a plain kcalloc(). If any of the following devm_kcalloc() allocations for
the BPID mapping arrays fails, the function returns without freeing the
bitmap. Free the BPID bitmap before returning from those error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: destroy DMA pool on CLDMA late init failure
t7xx_cldma_late_init() creates md_ctrl->gpd_dmapool before
initializing the TX and RX rings. If any ring initialization
fails, the error path frees the already initialized rings but
leaves the DMA pool allocated.
Destroy md_ctrl->gpd_dmapool on the late-init failure path
to avoid leaking the DMA pool. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: xen: scsiback: Free the command tag on the TMR submit-failure path
scsiback_device_action() obtains a command tag in
scsiback_get_pend_req() and submits a task-management request with
target_submit_tmr(). When target_submit_tmr() fails it returns < 0 and
scsiback jumps to the err: label, which sends a response but frees
nothing, leaking the tag.
Impact: a pvSCSI guest can leak the command tags of a LUN's session,
stopping the LUN, by issuing VSCSIIF_ACT_SCSI_ABORT or RESET requests
whenever target_submit_tmr() fails.
transport_generic_free_cmd() cannot be used here. By the time
target_submit_tmr() returns an error it has already run
__target_init_cmd() (so se_cmd->cmd_kref is one, not zero), and on its
target_get_sess_cmd() error path it has freed se_cmd->se_tmr_req via
core_tmr_release_req() while leaving SCF_SCSI_TMR_CDB set and the
pointer dangling. Letting the command release run target_free_cmd_mem()
would then double-free se_tmr_req.
Use the same helper, which returns just the tag, on this path too. |
