| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
memcg: avoid charging the root memcg from obj_cgroup_charge_pages()
obj_cgroup_charge_pages() resolves the objcg to its memcg and calls
try_charge_memcg(), which does not short circuit the root memcg. That
memcg can be the root memcg: obj_cgroup_is_root() reflects the memcg the
objcg was created for and is never updated, while memcg_reparent_objcgs()
does redirect objcg->memcg to the parent on rmdir. An objcg of a dying
child of root therefore passes every obj_cgroup_is_root() filter but
resolves to the root memcg.
Folios keep the objcg they were charged with, so this is easy to reach
through zswap: allocate anon memory in a cgroup, move the task out, remove
the cgroup, then write to the root cgroup's memory.reclaim. The reclaimed
folios are charged through the reparented objcg and end up in
refill_stock() with the root memcg:
WARNING: mm/memcontrol.c:2198 at refill_stock+0x644/0x940
refill_stock+0x644/0x940
try_charge_memcg+0x12d6/0x1570
__obj_cgroup_charge+0x35/0xf0
obj_cgroup_charge+0x1de/0x210
obj_cgroup_charge_zswap+0x83/0x270
zswap_store+0x1620/0x2000
swap_writeout+0x94c/0x14c0
shrink_folio_list+0x3388/0x52b0
[...]
try_to_free_mem_cgroup_pages+0x30d/0x830
user_proactive_reclaim+0x504/0x840
memory_reclaim+0x1f/0x30
Beyond the warning, the charge is asymmetric: obj_cgroup_uncharge_pages()
skips refill_stock() for the root memcg, so the root's page counter grows
and is never uncharged. It is not user visible, since memory.current is
not exposed on the root, but it is a leak.
Use try_charge(), which returns early for the root memcg, restoring the
symmetry with obj_cgroup_uncharge_pages().
The above sequence was scripted into a standalone reproducer (zswap on,
swap on a virtio disk, 512MB of anon memory faulted in inside a child of
the root cgroup, the task then migrated to the root cgroup, the child
removed, followed by "echo 600M swappiness=max > memory.reclaim" on the
root) and run in a CONFIG_DEBUG_VM=y VM. It reproduces the splat on the
first zswap store of a reparented folio, with the same call chain as the
report. With this patch applied the splat is gone while the zswap store
count over the run is unchanged, so the same path is still exercised.
cgroup selftests test_zswap, test_kmem and test_memcontrol show no new
failures. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reset the AP_VLAN tailroom counter on ifdown
On ifup, AP_VLAN interfaces get crypto_tx_tailroom_needed_cnt from
the AP interface, but it's never decremented again unless the AP is
also brought down. Thus, bringing the same AP_VLAN up again will
increment the counter again and eventually hit the sanity check:
WARN_ON_ONCE(sdata->crypto_tx_tailroom_needed_cnt !=
master->crypto_tx_tailroom_needed_cnt);
Reset it on ifdown to avoid that. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: codel: bound the dropping loop per dequeue call
The CoDel control law schedules the next drop one interval/sqrt(count)
after the previous drop, using the configured interval
(codel_params.interval). For very small intervals the scheduled step
rounds down to zero, so the dropping loop in codel_dequeue() never
advances and drains the entire backlog under the qdisc lock in one
call - an unprivileged user can trigger a soft lockup this way.
Fix in the shared codel code used by both codel and fq_codel:
1. Make the control-law step at least 1 tick so the dropping loop
always moves forward.
2. Cap the dropping loop at CODEL_MAX_DROPS_PER_DEQUEUE (256) drops
per codel_dequeue() call, resyncing drop_next to now when the cap
is hit: the catch-up owed to the loop grows with the idle gap and
the backlog, which no interval threshold can bound. This is a
deliberate behaviour change after long idle gaps.
The cap applies to fq_codel (4b549a2ef4be) and the mac80211 TXQ path
(fixed interval, cap only).
The target sojourn delay (codel_params.target) is not validated: it
does not feed the control law, so a sub-tick value is aggressive
rather than deadlock-prone.
Conditions to recreate the bug:
- tc qdisc add dev lo root handle 1: tbf rate 1kbit burst 2kb limit 1000000
- tc qdisc add dev lo parent 1:1 handle 10: codel interval 2us target 1ms noecn limit 1000000 (same for fq_codel)
- unpatched kernel: tc accepts it; a UDP flood under the 1kbit tbf
soft-lockups (watchdog: BUG: soft lockup) while one
codel_dequeue() call drops the backlog under the qdisc lock
- patched kernel: same setup, at most 256 drops per dequeue call,
no soft lockup
Testing: claim reproducer and interval 2us/3us variants run clean;
tdc qdisc category passes (see the selftests patch). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb: 6fire: Avoid embedded URBs
The USB 6fire driver uses URBs embedded in different structs for PCM,
MIDI and communication, and this is basically a buggy implementation
nowadays; since a URB is managed with a refcount, this may lead to a
UAF when the URB is released asynchronously.
For addressing the problem, this patch converts those embedded URBs to
ones that are properly allocated via usb_alloc_urb(). The
pcm_urb.packets[] is gone, as it's allocated by usb_alloc_urb(), hence
it's found in urb.iso_frame_desc[] instead.
The conversions are rather straightforward; each embedded struct urb
is changed to a pointer, and its callers are updated accordingly.
The resource for those structs are released in the common destructor
functions (usb6fire_comm_free(), etc), which are called at both the
init error path and the disconnect.
No functional changes, only compile-tested. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/efa: Keep EQ resources alive while IRQ is registered
The completion IRQ handler accesses the EQ state and DMA buffer. Its IRQ was
registered before that state was initialized, while teardown released the
buffer before free_irq() synchronized the handler.
Initialize the EQ without arming it, register the IRQ, and then arm it.
Reverse the resource order during teardown by freeing the IRQ before
destroying the EQ. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: lookup hci_conn on RX path on protocol side
The hdev lock/lookup/unlock/use pattern in the packet RX path doesn't
ensure hci_conn* is not concurrently modified/deleted. This locking
appears to be leftover from before conn_hash started using RCU
commit bf4c63252490b ("Bluetooth: convert conn hash to RCU")
and not clear if it had purpose since then.
Currently, there are code paths that delete hci_conn* from elsewhere
than the ordered hdev->workqueue where the RX work runs in. E.g.
commit 5af1f84ed13a ("Bluetooth: hci_sync: Fix UAF on hci_abort_conn_sync")
introduced some of these, and there probably were a few others before
it. It's better to do the locking so that even if these run
concurrently no UAF is possible.
Move the lookup of hci_conn and associated socket-specific conn to
protocol recv handlers, and do them within a single critical section
to cover hci_conn* usage and lookup.
syzkaller has reported a crash that appears to be this issue:
[Task hdev->workqueue] [Task 2]
hci_disconnect_all_sync
l2cap_recv_acldata(hcon)
hci_conn_get(hcon)
hci_abort_conn_sync(hcon)
hci_dev_lock
hci_dev_lock
hci_conn_del(hcon)
v-------------------------------- hci_dev_unlock
hci_conn_put(hcon)
conn = hcon->l2cap_data (UAF) |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix incomplete backport in cfids_invalidation_worker()
The previous commit bdb596ceb4b7 ("smb: client: fix potential UAF in
smb2_close_cached_fid()") was an incomplete backport and missed one
kref_put() call in cfids_invalidation_worker() that should have been
converted to close_cached_dir(). |
| In the Linux kernel, the following vulnerability has been resolved:
ima: don't clear IMA_DIGSIG flag when setting or removing non-IMA xattr
Currently when both IMA and EVM are in fix mode, the IMA signature will
be reset to IMA hash if a program first stores IMA signature in
security.ima and then writes/removes some other security xattr for the
file.
For example, on Fedora, after booting the kernel with "ima_appraise=fix
evm=fix ima_policy=appraise_tcb" and installing rpm-plugin-ima,
installing/reinstalling a package will not make good reference IMA
signature generated. Instead IMA hash is generated,
# getfattr -m - -d -e hex /usr/bin/bash
# file: usr/bin/bash
security.ima=0x0404...
This happens because when setting security.selinux, the IMA_DIGSIG flag
that had been set early was cleared. As a result, IMA hash is generated
when the file is closed.
Similarly, IMA signature can be cleared on file close after removing
security xattr like security.evm or setting/removing ACL.
Prevent replacing the IMA file signature with a file hash, by preventing
the IMA_DIGSIG flag from being reset.
Here's a minimal C reproducer which sets security.selinux as the last
step which can also replaced by removing security.evm or setting ACL,
#include <stdio.h>
#include <sys/xattr.h>
#include <fcntl.h>
#include <unistd.h>
#include <string.h>
#include <stdlib.h>
int main() {
const char* file_path = "/usr/sbin/test_binary";
const char* hex_string = "030204d33204490066306402304";
int length = strlen(hex_string);
char* ima_attr_value;
int fd;
fd = open(file_path, O_WRONLY|O_CREAT|O_EXCL, 0644);
if (fd == -1) {
perror("Error opening file");
return 1;
}
ima_attr_value = (char*)malloc(length / 2 );
for (int i = 0, j = 0; i < length; i += 2, j++) {
sscanf(hex_string + i, "%2hhx", &ima_attr_value[j]);
}
if (fsetxattr(fd, "security.ima", ima_attr_value, length/2, 0) == -1) {
perror("Error setting extended attribute");
close(fd);
return 1;
}
const char* selinux_value= "system_u:object_r:bin_t:s0";
if (fsetxattr(fd, "security.selinux", selinux_value, strlen(selinux_value), 0) == -1) {
perror("Error setting extended attribute");
close(fd);
return 1;
}
close(fd);
return 0;
} |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: Do not kfree() devres managed rdev
Since the allocation of the drivers main structure was changed to
devm_drm_dev_alloc() rdev is managed by devres and we shouldn't be calling
kfree() on it.
This fixes things exploding if the driver probe fails and devres cleans up
the rdev after we already free'd it.
(cherry picked from commit 16c0681617b8a045773d4d87b6140002fa75b03b) |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Disable periods-elapsed work when closing PCM
avs_dai_fe_shutdown() handles the shutdown procedure for HOST HDAudio
stream while period-elapsed work services its IRQs. As the former
frees the DAI's private context, these two operations shall be
synchronized to avoid slab-use-after-free or worse errors. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-fc: avoid scheduling association deletion twice
When forcefully shutting down a port via the configfs interface,
nvmet_port_subsys_drop_link() first calls nvmet_port_del_ctrls() and
then nvmet_disable_port(). Both functions will eventually schedule all
remaining associations for deletion.
The current implementation checks whether an association is about to be
removed, but only after the work item has already been scheduled. As a
result, it is possible for the first scheduled work item to free all
resources, and then for the same work item to be scheduled again for
deletion.
Because the association list is an RCU list, it is not possible to take
a lock and remove the list entry directly, so it cannot be looked up
again. Instead, a flag (terminating) must be used to determine whether
the association is already in the process of being deleted. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gpusvm: fix hmm_pfn_to_map_order() usage
Handle the case where the hmm range partially covers a huge page (like
2M), otherwise we can potentially end up doing something nasty like
mapping memory which is outside the range, and maybe not even mapped by
the mm. Fix is based on the xe userptr code, which in a future patch
will directly use gpusvm, so needs alignment here.
v2:
- Add kernel-doc (Matt B)
- s/fls/ilog2/ (Thomas) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Sync pending IRQ work before freeing ring buffer
Fix a race where irq_work can be queued in bpf_ringbuf_commit()
but the ring buffer is freed before the work executes.
In the syzbot reproducer, a BPF program attached to sched_switch
triggers bpf_ringbuf_commit(), queuing an irq_work. If the ring buffer
is freed before this work executes, the irq_work thread may accesses
freed memory.
Calling `irq_work_sync(&rb->work)` ensures that all pending irq_work
complete before freeing the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SCO: Fix UAF on sco_conn_free
BUG: KASAN: slab-use-after-free in sco_conn_free net/bluetooth/sco.c:87 [inline]
BUG: KASAN: slab-use-after-free in kref_put include/linux/kref.h:65 [inline]
BUG: KASAN: slab-use-after-free in sco_conn_put+0xdd/0x410
net/bluetooth/sco.c:107
Write of size 8 at addr ffff88811cb96b50 by task kworker/u17:4/352
CPU: 1 UID: 0 PID: 352 Comm: kworker/u17:4 Not tainted
6.17.0-rc5-g717368f83676 #4 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci13 hci_cmd_sync_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x10b/0x170 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x191/0x550 mm/kasan/report.c:482
kasan_report+0xc4/0x100 mm/kasan/report.c:595
sco_conn_free net/bluetooth/sco.c:87 [inline]
kref_put include/linux/kref.h:65 [inline]
sco_conn_put+0xdd/0x410 net/bluetooth/sco.c:107
sco_connect_cfm+0xb4/0xae0 net/bluetooth/sco.c:1441
hci_connect_cfm include/net/bluetooth/hci_core.h:2082 [inline]
hci_conn_failed+0x20a/0x2e0 net/bluetooth/hci_conn.c:1313
hci_conn_unlink+0x55f/0x810 net/bluetooth/hci_conn.c:1121
hci_conn_del+0xb6/0x1110 net/bluetooth/hci_conn.c:1147
hci_abort_conn_sync+0x8c5/0xbb0 net/bluetooth/hci_sync.c:5689
hci_cmd_sync_work+0x281/0x380 net/bluetooth/hci_sync.c:332
process_one_work kernel/workqueue.c:3236 [inline]
process_scheduled_works+0x77e/0x1040 kernel/workqueue.c:3319
worker_thread+0xbee/0x1200 kernel/workqueue.c:3400
kthread+0x3c7/0x870 kernel/kthread.c:463
ret_from_fork+0x13a/0x1e0 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Allocated by task 31370:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x30/0x70 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:388 [inline]
__kasan_kmalloc+0x82/0x90 mm/kasan/common.c:405
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4382 [inline]
__kmalloc_noprof+0x22f/0x390 mm/slub.c:4394
kmalloc_noprof include/linux/slab.h:909 [inline]
sk_prot_alloc+0xae/0x220 net/core/sock.c:2239
sk_alloc+0x34/0x5a0 net/core/sock.c:2295
bt_sock_alloc+0x3c/0x330 net/bluetooth/af_bluetooth.c:151
sco_sock_alloc net/bluetooth/sco.c:562 [inline]
sco_sock_create+0xc0/0x350 net/bluetooth/sco.c:593
bt_sock_create+0x161/0x3b0 net/bluetooth/af_bluetooth.c:135
__sock_create+0x3ad/0x780 net/socket.c:1589
sock_create net/socket.c:1647 [inline]
__sys_socket_create net/socket.c:1684 [inline]
__sys_socket+0xd5/0x330 net/socket.c:1731
__do_sys_socket net/socket.c:1745 [inline]
__se_sys_socket net/socket.c:1743 [inline]
__x64_sys_socket+0x7a/0x90 net/socket.c:1743
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xc7/0x240 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 31374:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x30/0x70 mm/kasan/common.c:68
kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:243 [inline]
__kasan_slab_free+0x3d/0x50 mm/kasan/common.c:275
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2428 [inline]
slab_free mm/slub.c:4701 [inline]
kfree+0x199/0x3b0 mm/slub.c:4900
sk_prot_free net/core/sock.c:2278 [inline]
__sk_destruct+0x4aa/0x630 net/core/sock.c:2373
sco_sock_release+0x2ad/0x300 net/bluetooth/sco.c:1333
__sock_release net/socket.c:649 [inline]
sock_close+0xb8/0x230 net/socket.c:1439
__fput+0x3d1/0x9e0 fs/file_table.c:468
task_work_run+0x206/0x2a0 kernel/task_work.c:227
get_signal+0x1201/0x1410 kernel/signal.c:2807
arch_do_signal_or_restart+0x34/0x740 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop+0x68/0xc0 kernel/entry/common.c:40
exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline]
s
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ctcm: Fix double-kfree
The function 'mpc_rcvd_sweep_req(mpcginfo)' is called conditionally
from function 'ctcmpc_unpack_skb'. It frees passed mpcginfo.
After that a call to function 'kfree' in function 'ctcmpc_unpack_skb'
frees it again.
Remove 'kfree' call in function 'mpc_rcvd_sweep_req(mpcginfo)'.
Bug detected by the clang static analyzer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qlogic/qede: fix potential out-of-bounds read in qede_tpa_cont() and qede_tpa_end()
The loops in 'qede_tpa_cont()' and 'qede_tpa_end()', iterate
over 'cqe->len_list[]' using only a zero-length terminator as
the stopping condition. If the terminator was missing or
malformed, the loop could run past the end of the fixed-size array.
Add an explicit bound check using ARRAY_SIZE() in both loops to prevent
a potential out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Clean up only new IRQ glue on request_irq() failure
The mlx5_irq_alloc() function can inadvertently free the entire rmap
and end up in a crash[1] when the other threads tries to access this,
when request_irq() fails due to exhausted IRQ vectors. This commit
modifies the cleanup to remove only the specific IRQ mapping that was
just added.
This prevents removal of other valid mappings and ensures precise
cleanup of the failed IRQ allocation's associated glue object.
Note: This error is observed when both fwctl and rds configs are enabled.
[1]
mlx5_core 0000:05:00.0: Successfully registered panic handler for port 1
mlx5_core 0000:05:00.0: mlx5_irq_alloc:293:(pid 66740): Failed to
request irq. err = -28
infiniband mlx5_0: mlx5_ib_test_wc:290:(pid 66740): Error -28 while
trying to test write-combining support
mlx5_core 0000:05:00.0: Successfully unregistered panic handler for port 1
mlx5_core 0000:06:00.0: Successfully registered panic handler for port 1
mlx5_core 0000:06:00.0: mlx5_irq_alloc:293:(pid 66740): Failed to
request irq. err = -28
infiniband mlx5_0: mlx5_ib_test_wc:290:(pid 66740): Error -28 while
trying to test write-combining support
mlx5_core 0000:06:00.0: Successfully unregistered panic handler for port 1
mlx5_core 0000:03:00.0: mlx5_irq_alloc:293:(pid 28895): Failed to
request irq. err = -28
mlx5_core 0000:05:00.0: mlx5_irq_alloc:293:(pid 28895): Failed to
request irq. err = -28
general protection fault, probably for non-canonical address
0xe277a58fde16f291: 0000 [#1] SMP NOPTI
RIP: 0010:free_irq_cpu_rmap+0x23/0x7d
Call Trace:
<TASK>
? show_trace_log_lvl+0x1d6/0x2f9
? show_trace_log_lvl+0x1d6/0x2f9
? mlx5_irq_alloc.cold+0x5d/0xf3 [mlx5_core]
? __die_body.cold+0x8/0xa
? die_addr+0x39/0x53
? exc_general_protection+0x1c4/0x3e9
? dev_vprintk_emit+0x5f/0x90
? asm_exc_general_protection+0x22/0x27
? free_irq_cpu_rmap+0x23/0x7d
mlx5_irq_alloc.cold+0x5d/0xf3 [mlx5_core]
irq_pool_request_vector+0x7d/0x90 [mlx5_core]
mlx5_irq_request+0x2e/0xe0 [mlx5_core]
mlx5_irq_request_vector+0xad/0xf7 [mlx5_core]
comp_irq_request_pci+0x64/0xf0 [mlx5_core]
create_comp_eq+0x71/0x385 [mlx5_core]
? mlx5e_open_xdpsq+0x11c/0x230 [mlx5_core]
mlx5_comp_eqn_get+0x72/0x90 [mlx5_core]
? xas_load+0x8/0x91
mlx5_comp_irqn_get+0x40/0x90 [mlx5_core]
mlx5e_open_channel+0x7d/0x3c7 [mlx5_core]
mlx5e_open_channels+0xad/0x250 [mlx5_core]
mlx5e_open_locked+0x3e/0x110 [mlx5_core]
mlx5e_open+0x23/0x70 [mlx5_core]
__dev_open+0xf1/0x1a5
__dev_change_flags+0x1e1/0x249
dev_change_flags+0x21/0x5c
do_setlink+0x28b/0xcc4
? __nla_parse+0x22/0x3d
? inet6_validate_link_af+0x6b/0x108
? cpumask_next+0x1f/0x35
? __snmp6_fill_stats64.constprop.0+0x66/0x107
? __nla_validate_parse+0x48/0x1e6
__rtnl_newlink+0x5ff/0xa57
? kmem_cache_alloc_trace+0x164/0x2ce
rtnl_newlink+0x44/0x6e
rtnetlink_rcv_msg+0x2bb/0x362
? __netlink_sendskb+0x4c/0x6c
? netlink_unicast+0x28f/0x2ce
? rtnl_calcit.isra.0+0x150/0x146
netlink_rcv_skb+0x5f/0x112
netlink_unicast+0x213/0x2ce
netlink_sendmsg+0x24f/0x4d9
__sock_sendmsg+0x65/0x6a
____sys_sendmsg+0x28f/0x2c9
? import_iovec+0x17/0x2b
___sys_sendmsg+0x97/0xe0
__sys_sendmsg+0x81/0xd8
do_syscall_64+0x35/0x87
entry_SYSCALL_64_after_hwframe+0x6e/0x0
RIP: 0033:0x7fc328603727
Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b ed
ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48
RSP: 002b:00007ffe8eb3f1a0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fc328603727
RDX: 0000000000000000 RSI: 00007ffe8eb3f1f0 RDI: 000000000000000d
RBP: 00007ffe8eb3f1f0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000
R13: 00000000000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix unlikely race in gdlm_put_lock
In gdlm_put_lock(), there is a small window of time in which the
DFL_UNMOUNT flag has been set but the lockspace hasn't been released,
yet. In that window, dlm may still call gdlm_ast() and gdlm_bast().
To prevent it from dereferencing freed glock objects, only free the
glock if the lockspace has actually been released. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rsrc: don't rely on user vaddr alignment
There is no guaranteed alignment for user pointers, however the
calculation of an offset of the first page into a folio after coalescing
uses some weird bit mask logic, get rid of it. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: avoid potential out-of-bounds in btrfs_encode_fh()
The function btrfs_encode_fh() does not properly account for the three
cases it handles.
Before writing to the file handle (fh), the function only returns to the
user BTRFS_FID_SIZE_NON_CONNECTABLE (5 dwords, 20 bytes) or
BTRFS_FID_SIZE_CONNECTABLE (8 dwords, 32 bytes).
However, when a parent exists and the root ID of the parent and the
inode are different, the function writes BTRFS_FID_SIZE_CONNECTABLE_ROOT
(10 dwords, 40 bytes).
If *max_len is not large enough, this write goes out of bounds because
BTRFS_FID_SIZE_CONNECTABLE_ROOT is greater than
BTRFS_FID_SIZE_CONNECTABLE originally returned.
This results in an 8-byte out-of-bounds write at
fid->parent_root_objectid = parent_root_id.
A previous attempt to fix this issue was made but was lost.
https://lore.kernel.org/all/4CADAEEC020000780001B32C@vpn.id2.novell.com/
Although this issue does not seem to be easily triggerable, it is a
potential memory corruption bug that should be fixed. This patch
resolves the issue by ensuring the function returns the appropriate size
for all three cases and validates that *max_len is large enough before
writing any data. |
