| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Take cgroup_lock() first in scx_cgroup_lock()
scx_cgroup_lock() write-locks scx_cgroup_ops_rwsem and then takes
cgroup_lock(), which can deadlock through kernfs:
scx enable/disable cgroup rmdir cpu.weight write
------------------ ------------ ----------------
cgroup_lock()
percpu_down_write(rwsem)
cgroup_lock()
kernfs_get_active()
percpu_down_read(rwsem)
kernfs_drain()
The enable path waits for the rmdir to release cgroup_mutex. The rmdir,
deactivating the cpu controller's files, waits in kernfs_drain() for the
write's active reference. The write, in scx_group_set_weight(), waits for
the rwsem behind the pending writer.
Take cgroup_lock() first. The set_* paths take no cgroup locks inside the
read side, so a pending write-lock then only waits for read sections that
always run to completion, and no dependency from the rwsem back to
cgroup_mutex remains. |
| In the Linux kernel, the following vulnerability has been resolved:
rqspinlock: Reset tail when preserving queue on deadlock
Currently, the destruction of the waiter queue is suppressed for
rqspinlock in cases where a deadlock is detected. Deadlock checks happen
relatively frequently (on entry for AA, within 1ms for ABBA), and waiter
threads may not be involved in locking scenarios involving deadlocks.
Thus, it is useful to not flush the queue and let other waiters take a
stab at acquiring the lock after we detect a deadlock and exit.
However, we need to follow the same logic as what we did previously for
the waitq_timeout label: reset the tail, and if we cannot, signal the
next waiter appropriately. In case of deadlocks, this signal would just
mark the MCS node as unlocked, and in case of timeouts, it would signal
RES_TIMEOUT_VAL. The difference thus is in the value propagated, which
decides whether the queue remains active or gets flushed.
Not doing the tail reset, and waiting for the next waiter can lead to
cases where we are the final waiter, and thus no next waiter arrives,
leading to intermittent stalls in this path. Once the next waiter does
join, we will be unblocked. In the theoretical case when the next waiter
never joins, we risk stalling indefinitely.
This can only happen for ABBA deadlocks, since entry into the wait queue
is guarded with AA checks. A precise sequence of executions leading up
to this scenario can be:
CPU 0 holds lock A.
CPU 1 holds lock B.
CPU 2 attempts lock B, becomes the pending waiter for B.
CPU 0 attempts lock B. B has locked+pending bits set, thus CPU 0 queues.
CPU 1 attempts lock A.
CPU 0 detects an ABBA deadlock.
Once deadlock detection happens for CPU 0, it will sit waiting for the
next waiter in the queue to populate node->next, which will experience
delays until such a waiter arrives.
Fix this by adjusting the logic for the check for deadlocks preceding
the waitq_timeout label. It would make sense to consolidate code for
both cases and use 'ret' to distinguish the value being propagated, but
that is left as an exercise for a future refactoring task to avoid diff
noise in this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Bound the DROM dual link port number before indexing sw->ports
tb_drom_parse_entry_port() validates the device-supplied header->index
against sw->config.max_port_number before indexing sw->ports[], but the
sibling field entry->dual_link_port_nr -- a 6-bit value also read from
the DROM -- indexes the same array with no such check. A malicious or
malformed Thunderbolt device can set dual_link_port_nr beyond the
allocated sw->ports[] (max_port_number + 1 entries), producing an
out-of-bounds tb_port pointer that is stored and later dereferenced.
Reject a port entry whose dual_link_port_nr exceeds max_port_number,
the same bound already applied to header->index. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: check ibuf_len against rxbuf_len in bulk msg
ibuf_len is the bulk IN (receive) buffer size, but the EMSGSIZE check
in usbio_bulk_msg() compares it against txbuf_len — the bulk OUT
endpoint size. Both are taken independently from different endpoints
in usbio_probe(), so the check is wrong when they differ.
Use rxbuf_len for the IN direction. This matches the buffer that
actually holds the response data. |
| Access of Resource Using Incompatible Type ('Type Confusion') vulnerability in themrdemonized xray-monolith.This issue affects xray-monolith: before 2025.12.30. |
| The WP Project Manager Pro plugin for WordPress is vulnerable to SQL Injection in all versions up to, and including, 4.0.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| A vulnerability was determined in CodeAstro Apartment Visitor Management System 1.0. Affected is an unknown function of the file /apartment-visitor/forgotpw.php. Executing a manipulation of the argument secode can lead to sql injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. |
| A security flaw has been discovered in SourceCodester Simple Online Food Ordering System 1.0. Impacted is an unknown function of the file /fos/admin/view_order.php. The manipulation of the argument ID results in sql injection. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. |
| A vulnerability was detected in code-projects Assessment Management 1.0. The affected element is an unknown function of the file /welcome.php. The manipulation of the argument userid results in sql injection. The attack may be launched remotely. The exploit is now public and may be used. |
| baserCMS before 5.3.0 contains a SQL injection vulnerability in BcDatabaseService.php that allows authenticated administrators to inject attacker-controlled table names and configuration values directly into SQL statements across sequence update, CSV export, and table management operations. Attackers can chain a backup restore code injection flaw, where PHP code outside class definitions in schema files executes unconditionally upon loading, to plant malicious table names and trigger error-based SQL injection that retrieves database version, schema contents, and arbitrary data from the PostgreSQL backend. |
| Vulnerability in the Oracle General Ledger product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Difficult to exploit vulnerability allows high privileged attacker with logon to the infrastructure where Oracle General Ledger executes to compromise Oracle General Ledger. While the vulnerability is in Oracle General Ledger, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle General Ledger accessible data as well as unauthorized access to critical data or complete access to all Oracle General Ledger accessible data. CVSS 3.1 Base Score 7.2 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:N). |
| Vulnerability in Oracle Autonomous Health Framework (component: Trace File Analyzer). Supported versions that are affected are 26-26.1.0, 26.2.0, 26.3.1, 26.5.0 and 26.5.2. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Autonomous Health Framework. While the vulnerability is in Oracle Autonomous Health Framework, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Autonomous Health Framework accessible data as well as unauthorized update, insert or delete access to some of Oracle Autonomous Health Framework accessible data. CVSS 3.1 Base Score 8.5 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:L/A:N). |
| LiquidJS is a Shopify / GitHub Pages compatible template engine in pure JavaScript. From 10.26.0 until 10.27.1, the strip_html filter in src/filters/html.ts can enter an infinite loop when an input string contains <, includes at least one preceding character, and has no later >. In strip_html, the search for the next opener advances lt while the loop index remains unchanged when the closer search returns -1, and the equality-only stall guard does not exit because the loop index is less than lt. Reprocessing the same state indefinitely blocks template rendering and can cause denial of service with an input as short as a<. This issue is fixed in version 10.27.1. |
| Picotls is a TLS protocol library that allows users select different crypto backends based on their use case. Picotls implements its own ASN.1 validation helper, which is used by the minicrypto backend while parsing local PKCS#8 private keys. Prior to commit c14231d801407640bc42c2dcf92783409ea6a7c7, the validator recursively descends into constructed ASN.1 elements without enforcing a maximum nesting depth. If an application loads an attacker-supplied private-key file through ptls_minicrypto_load_private_key(), or otherwise calls the public ASN.1 validation API on untrusted DER, a crafted deeply nested ASN.1 structure can exhaust the process stack and crash the application. Note that the libcrypto (OpenSSL) backend does not use the ASN.1 validation helper of picotls, and therefore is immune to this vulnerability. The vulnerability has been addressed in commit c14231d801407640bc42c2dcf92783409ea6a7c7. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix use-after-free in cifs_try_adding_channels()
cifs_try_adding_channels() takes a temporary reference to an interface
before dropping iface_lock. If cifs_ses_add_channel() fails, it drops
that reference and then increments iface->weight_fulfilled.
A concurrent interface list refresh can remove the list reference while
channel creation is in progress. In that case, the failure-path
kref_put() releases the last reference and frees iface. Updating
weight_fulfilled afterward then accesses freed memory.
Increment weight_fulfilled before dropping the temporary reference,
keeping iface alive for the final access. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: prevent in6_dev_get() from resurrecting inet6_dev
in6_dev_get() reads dev->ip6_ptr under RCU and then unconditionally
increments its refcount. Device teardown can clear the pointer and drop
the last reference between these operations. The increment then
resurrects an object whose RCU free has already been queued, so callers
can use it after it is freed.
Use refcount_inc_not_zero() and return NULL when the object has already
reached zero. RCU keeps the memory accessible through the attempted
reference acquisition, and a successful increment pins the object for
the caller.
An independent run on the exact unpatched 6f5156d7a31a (v7.2-rc3)
kernel reproduced the invalid reference acquisition as UID 1000:
refcount_t: addition on 0; use-after-free.
ip6_mc_source+0xef4/0x17e0
It was followed by the corresponding reference underflow in
ip6_mc_source(). The supplied trace from the same unpatched revision
additionally shows the access after the RCU read-side section ends:
BUG: KASAN: slab-use-after-free in mutex_lock+0x76/0xe0
Write of size 8 at addr ffff888015b50240 by task poc/1219
Bug found and triaged by OpenAI Security Research and
validated by Trail of Bits. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve pointer state for commuted arithmetic
When scalar += pointer is handled in adjust_ptr_min_max_vals(), the
destination register inherits the pointer state from the source pointer.
Copying only selected fields is fragile because pointer provenance is
tracked by several bpf_reg_state fields.
Use the caller's temporary offset register to preserve the scalar operand
while replacing the destination with the full pointer state. This preserves
the frame number for PTR_TO_STACK registers and keeps parent identity
fields consistent. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: amba-pl011: cancel RS485 hrtimers after freeing IRQ
The RS485 trigger hrtimers are embedded in the devm-managed port and can
fire after it is freed. The IRQ handler can arm a timer, so free the IRQ
first and then cancel both timers.
Complete the RS485 stop without arming a timer, and cancel the timers
in remove() for the suspend-then-unbind path, where shutdown is not
called.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: acquire init_mm lock on huge vmap to avoid ptdump UAF
Patch series "mm: fix UAF caused by race between ptdump and vmap pgtable
freeing", v6.
Kernel page table walkers fall into two broad categories - those ranges
where no exclusion is required via walk_kernel_page_table_range_lockless()
and those where exclusion is required via walk_kernel_page_table_range()
or walk_page_range_debug().
The former category is used only by arm64 arch code operating on ranges it
both wholly owns and does not concurrently write.
The latter category consists of kernel page table walkers operating on
ranges that are wholly owned (but which need exclusion against concurrent
writers).
The lock used for exclusion is the mmap lock, and for kernel ranges this
is the mmap lock on init_mm.
ptdump is a special case being both the only user of
walk_page_range_debug(), and the only case in which it walks ranges it
does not own.
This presents a problem, as page tables may be freed under ptdump. And
indeed there is a use-after-free bug in the kernel as a result, which this
series addresses.
vmap promotes page tables to huge leaf entries where possible, freeing the
lower page table when it does. It does this with no meaningful locks held
against concurrent ptdump walks.
As a result, use-after-free can currently occur. This series addresses
the issue by having the vmap huge promotion logic acquire the mmap read
lock while both setting the huge page table entry and freeing the prior
leaf page table.
The ptdump code already acquires the mmap write lock, so by doing so we
ensure that the ptdump walker only ever observes either the huge page
table entry or the existing page table entry, and nothing is freed
underneath it.
A mitigation for this issue was already applied for arm64 in commit
fa93b45fd397 ("arm64: Enable vmalloc-huge with ptdump"), which this series
has to deal with carefully.
This mitigation resolves the issue by acquiring the mmap read lock on
init_mm on vmap page table free if a ptdump is in progress.
However the fix in this series would cause a deadlock if we were to simply
apply it for arm64 without also reverting the change.
This is because vmap may acquire the read lock before ptdump attempts to
acquire the write lock, which then gets queued, and rwsem starvation rules
mean that the (unacknowledged) nested mmap read lock in the arm64 code
would also block, meaning the original read lock is never released and
thus deadlock.
This series works around this by #ifndef CONFIG_ARM64'ing the mmap read
lock in vmap logic, then partially reverting commit fa93b45fd397 ("arm64:
Enable vmalloc-huge with ptdump"), keeping the enablement of huge vmap
support, and removing the ifdeffery with the partial revert patch.
There are related issues that are also addressed in this series:
* x86 page attribute logic, specifically Change Page Attributes (CPA),
implements a feature whereby huge ranges can be collapsed into huge leaf
entries. This can similarly cause a UAF when done in parallel with a
ptdump walk, so similarly acquire the init_mm mmap lock to avoid this.
* The CPA logic allows concurrent page table manipulation and CPA
collapse, meaning the former risks accessing a page table the latter
frees. Fix this by acquiring mmap write lock on init_mm across the
whole CPA collapse operation and read lock on the page table
manipulation.
* x86 and arm64 permit walks of non-kernel mm's (both allowing efi mm
walks, and in x86's case arbitrary mm's), so we ensure kernel mappings
remain stable by locking the init_mm as well as the mm being walked.
The ordering of patches is established for both strict dependencies (the
arm64 partial revert in particular has to be done after the vmap changes)
and logical ones (the non-kernel mm fix only makes sense once the vmap/CPA
fixes are in place).
This patch (of 3):
Currently there is a nasty ra
---truncated--- |
| A flaw was found in OpenStack Keystone where an application credential token can escape its intended project scope through token-method reauthentication. Keystone rejects an explicit scope change for an application credential token, but an omitted scope falls through to the owner's default project. If the owner has roles on that default project, Keystone issues a new token scoped there while still carrying the original application credential identity. Custom Keystone authentication plugins are subject to the same incomplete rescope guard. This allows a limited-scope application credential for one project to access another project within the owner's role assignments. |
