| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A log information disclosure vulnerability in B&R GateManager 4260 and 9250 versions <9.0.20262 and GateManager 8250 versions <9.2.620236042 allows authenticated users to view log information reserved for other users. |
| The information disclosure vulnerability present in B&R GateManager 4260 and 9250 versions <9.0.20262 and GateManager 8250 versions <9.2.620236042 allows authenticated users to generate fake audit log messages. |
| Denial of service in WLAN module due to improper check of subtypes in logic where excessive frames are dropped in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music |
| Image address is dereferenced before validating its range which can cause potential QSEE information leakage in Snapdragon Wired Infrastructure and Networking |
| User could gain access to secure memory due to incorrect argument into address range validation api used in SDI to capture requested contents in Snapdragon Industrial IOT, Snapdragon Mobile |
| Possible buffer overflow in Fastrpc while handling received parameters due to lack of validation on input parameters' in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile in APQ8098, MSM8998, QCM4290, QCM6125, QCS410, QCS4290, QCS610, QCS6125, QSM8250, QSM8350, SA6145P, SA6150P, SA6155, SA6155P, SA8150P, SA8155, SA8155P, SA8195P, SC7180, SDA640, SDA660, SDA845, SDA855, SDM640, SDM660, SDM830, SDM845, SDM850, SDX50M, SDX55, SDX55M, SM4250, SM4250P, SM6115, SM6115P, SM6125, SM6150, SM6150P, SM6250, SM6250P, SM6350, SM7125, SM7150, SM7150P, SM7225, SM7250, SM7250P, SM8150, SM8150P, SM8250, SM8350, SM8350P, SXR2130, SXR2130P |
| User can overwrite Security Code NV item without knowing current SPC due to improper validation of SPC code setting and device lock in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables |
| u'Third-party app may also call the broadcasts in Perfdump and cause privilege escalation issue due to improper access control' in Snapdragon Auto, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Wearables in Agatti, APQ8096AU, APQ8098, Bitra, Kamorta, MSM8909W, MSM8917, MSM8940, Nicobar, QCA6390, QCM2150, QCS605, Rennell, SA6155P, SA8155P, Saipan, SDA660, SDM429W, SDM450, SDM630, SDM636, SDM660, SDM670, SDM710, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130 |
| u'information disclosure in gatekeeper trustzone implementation as the throttling mechanism to prevent brute force attempts at getting user`s lock-screen password can be bypassed by performing the standard gatekeeper operations.' in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8009W, APQ8017, APQ8037, APQ8053, APQ8064AU, APQ8096, APQ8096AU, APQ8096SG, APQ8098, MDM8207, MDM9150, MDM9205, MDM9206, MDM9207, MDM9250, MDM9607, MDM9628, MDM9640, MDM9650, MDM9655, MSM8108, MSM8208, MSM8209, MSM8608, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996, MSM8996AU, MSM8996SG, MSM8998, QCM4290, QCS405, QCS410, QCS4290, QCS603, QCS605, QCS610, QM215, QSM8250, QSM8350, SA415M, SA515M, SA6145P, SA6150P, SA6155, SA6155P, SA8150P, SA8155, SA8155P, SA8195P, SC7180, SC8180X, SC8180XP, SDA429W, SDA640, SDA660, SDA670, SDA845, SDA855, SDM1000, SDM429, SDM429W, SDM439, SDM450, SDM455, SDM630, SDM632, SDM636, SDM640, SDM660, SDM670, SDM710, SDM712, SDM830, SDM845, SDM850, SDW2500, SDX24, SDX50M, SDX55, SDX55M, SM4125, SM4250, SM4250P, SM6115, SM6115P, SM6125, SM6150, SM6150P, SM6250, SM6250P, SM6350, SM7125, SM7150, SM7150P, SM7225, SM7250, SM7250P, SM8150, SM8150P, SM8250, SM8350, SM8350P, SXR1120, SXR1130, SXR2130, SXR2130P, WCD9330 |
| In Anchore Engine version 0.7.0, a specially crafted container image manifest, fetched from a registry, can be used to trigger a shell escape flaw in the anchore engine analyzer service during an image analysis process. The image analysis operation can only be executed by an authenticated user via a valid API request to anchore engine, or if an already added image that anchore is monitoring has its manifest altered to exploit the same flaw. A successful attack can be used to execute commands that run in the analyzer environment, with the same permissions as the user that anchore engine is run as - including access to the credentials that Engine uses to access its own database which have read-write ability, as well as access to the running engien analyzer service environment. By default Anchore Engine is released and deployed as a container where the user is non-root, but if users run Engine directly or explicitly set the user to 'root' then that level of access may be gained in the execution environment where Engine runs. This issue is fixed in version 0.7.1. |
| In TYPO3 CMS 9.0.0 through 9.5.16 and 10.0.0 through 10.4.1, it has been discovered that the backend user interface and install tool are vulnerable to a same-site request forgery. A backend user can be tricked into interacting with a malicious resource an attacker previously managed to upload to the web server. Scripts are then executed with the privileges of the victims' user session. In a worst-case scenario, new admin users can be created which can directly be used by an attacker. The vulnerability is basically a cross-site request forgery (CSRF) triggered by a cross-site scripting vulnerability (XSS) - but happens on the same target host - thus, it's actually a same-site request forgery. Malicious payload such as HTML containing JavaScript might be provided by either an authenticated backend user or by a non-authenticated user using a third party extension, e.g. file upload in a contact form with knowing the target location. To be successful, the attacked victim requires an active and valid backend or install tool user session at the time of the attack. This has been fixed in 9.5.17 and 10.4.2. The deployment of additional mitigation techniques is suggested as described below. - Sudo Mode Extension This TYPO3 extension intercepts modifications to security relevant database tables, e.g. those storing user accounts or storages of the file abstraction layer. Modifications need to confirmed again by the acting user providing their password again. This technique is known as sudo mode. This way, unintended actions happening in the background can be mitigated. - https://github.com/FriendsOfTYPO3/sudo-mode - https://extensions.typo3.org/extension/sudo_mode - Content Security Policy Content Security Policies tell (modern) browsers how resources served a particular site are handled. It is also possible to disallow script executions for specific locations. In a TYPO3 context, it is suggested to disallow direct script execution at least for locations /fileadmin/ and /uploads/. |
| GreenBrowser before version 1.2 has a vulnerability where apps that rely on URL Parsing to verify that a given URL is pointing to a trust server may be susceptible to many different ways to get URL parsing and verification wrong, which allows an attacker to circumvent the access control. This problem has been patched in version 1.2. |
| In the Password Reset Module in VESTA Control Panel through 0.9.8-25 and Hestia Control Panel before 1.1.1, Host header manipulation leads to account takeover because the victim receives a reset URL containing an attacker-controlled server name. |
| In PowerShell App Deployment Toolkit (aka PSAppDeployToolkit) through 3.8.0, an incorrect access control vulnerability in the default configuration may allow an authenticated user to potentially enable escalation of privilege via local access. |
| This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of NETGEAR R6700 V1.0.4.84_10.0.58 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of URLs. The issue results from the lack of proper routing of URLs. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-9618. |
| This vulnerability allows a firewall bypass on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of IPv6 connections. The issue results from the lack of proper filtering of IPv6 SSH connections. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-9663. |
| A stack information leak flaw was found in s390/s390x in the Linux kernel’s memory manager functionality, where it incorrectly writes to the /proc/sys/vm/cmm_timeout file. This flaw allows a local user to see the kernel data. |
| A vulnerability was found in all versions of containernetworking/plugins before version 0.8.6, that allows malicious containers in Kubernetes clusters to perform man-in-the-middle (MitM) attacks. A malicious container can exploit this flaw by sending rogue IPv6 router advertisements to the host or other containers, to redirect traffic to the malicious container. |
| A flaw was found in Infinispan (org.infinispan:infinispan-server-runtime) version 10, where it permits local access to controls via both REST and HotRod APIs. This flaw allows a user authenticated to the local machine to perform all operations on the caches, including the creation, update, deletion, and shutdown of the entire server. |
| An authorization bypass vulnerability was found in Ceph versions 15.2.0 before 15.2.2, where the ceph-mon and ceph-mgr daemons do not properly restrict access, resulting in gaining access to unauthorized resources. This flaw allows an authenticated client to modify the configuration and possibly conduct further attacks. |
