| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| WLED's GET /json/cfg endpoint (registered in wled00/wled_server.cpp) calls serveJson() with no settings-PIN check, unlike the /edit endpoint which explicitly checks correctPIN, disclosing the device's general configuration (network, hardware, LED setup) to any unauthenticated client on the network. Separately, the settings-PIN unlock state is tracked via a single global boolean `correctPIN` (wled00/wled.h), not per-session state: once any single client submits the correct 4-digit PIN via POST /json, correctPIN becomes true for every client, granting all subsequent unauthenticated clients full configuration-write access (OTA firmware updates, WiFi reconfiguration, factory reset) until the device reboots. |
| The LINUXTCP port of FreeModbus contains an off-by-one bounds check in xMBPortTCPPool() (demo/LINUXTCP/port/porttcp.c). The check `if (usTCPFrameBytesLeft > MB_TCP_BUF_SIZE)` uses a strict greater-than comparison instead of greater-than-or-equal against the 263-byte MB_TCP_BUF_SIZE limit. An MBAP frame with a Length field of 264 makes usTCPFrameBytesLeft equal to 263, which passes the flawed check, and the subsequent recv() call writes up to 263 bytes starting at buffer offset 7 into the 263-byte static buffer aucTCPBuf, overflowing it by 7 bytes into the adjacent static variable usTCPBufPos. A single crafted, unauthenticated Modbus TCP packet triggers the overflow, since Modbus has no built-in authentication. |
| It was not possible to govern the maximum number of transfer frames per incoming delivery, enabling an authenticated attacker to cause excessive resource usage and potential denial of service.
This issue affects Apache Qpid Proton-J: through 0.34.1.
Users are recommended to upgrade to version 0.35.0, which fixes the issue. |
| IoTSharp BlobStorageController.cs lacks the [Authorize] attribute applied to every other controller in the application (DevicesController, CustomersController, TenantsController, etc.), and no global authorization FallbackPolicy is configured in Startup.cs, leaving its Upload/Download/List/Modify/Delete endpoints reachable by unauthenticated remote attackers. The path/filename parameters passed to these endpoints (e.g. `_blob.WriteFileAsync($"{path}/{formFile.FileName}", ...)`) are used without sanitization, enabling path traversal that allows writing, reading, modifying, and deleting arbitrary files outside the intended blob storage directory, including web-accessible paths that can be leveraged for remote code execution via webshell upload. |
| Memos' webhook URL validation, isReservedIP() (internal/webhook/validate.go), checks a candidate IP against a reservedCIDRs list that omits 0.0.0.0/8 and never calls ip.IsUnspecified() — unlike the correctly implemented sibling function isInternalIP() in internal/httpgetter/html_meta.go, which does. Because Linux redirects connections to 0.0.0.0 to loopback (127.0.0.1), an attacker registering a webhook URL of http://0.0.0.0:PORT/ bypasses the reserved-IP check and causes the Memos server to make outbound HTTP requests to its own loopback interface, exposing internal-only services. |
| dr_libs dr_wav.h (all versions through current master) contains an integer overflow in W64 CUE chunk metadata parsing. In drwav__metadata_process_chunk(), a stage-1 capacity estimate truncates the 64-bit W64 chunk sizeInBytes to size_t before dividing by DRWAV_CUE_POINT_BYTES; on 32-bit builds this truncation causes the pre-allocated extra metadata capacity to be computed incorrectly. The subsequent read in drwav__read_cue_to_metadata_obj() computes the actual cue point count and allocation size using the full-precision, attacker-controlled cuePointCount field without cross-checking it against the stage-1 capacity estimate, and the only bounds enforcement on the resulting memory region (drwav__metadata_get_memory()) is a DRWAV_ASSERT, which compiles to a no-op under -DNDEBUG (the default for release builds). A crafted W64 WAV file can therefore cause a heap buffer overflow in any 32-bit application parsing untrusted WAV metadata. |
| Link following vulnerability in the Uninstaller component in CCleaner prior to 7.10.1464 on Windows allows a local, low-privileged attacker to escalate privileges to SYSTEM via a symlink/junction created during application uninstallation, which CCleaner follows when deleting the application's data folder with elevated integrity. |
| In imgsensor, there is a possible application crash due to incorrect error handling. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11012302; Issue ID: MSV-7833. |
| In Bluetooth driver, there is a possible permission bypass due to a missing permission check. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00488300; Issue ID: MSV-7296. |
| ESPHome through 2026.7.0-dev contains an operator-precedence bug in the cv.url() validator in esphome/config_validation.py: `if parsed.scheme and parsed.netloc or parsed.scheme == "file": return parsed.geturl()`. Because `and` binds tighter than `or`, any file: URI passes validation regardless of netloc. This validator gates the `url:` field of the external_components YAML directive's git source schema, which is passed to `git clone` (git supports file:// natively). A crafted `external_components` block with `url: "file:///attacker/repo"` clones an attacker-controlled local path, which is then added to Python's import machinery via ESPHome's component loader, executing arbitrary Python code when the YAML configuration is processed (e.g. via `esphome config`/`esphome run`). |
| Domoticz's MochadTCP::MatchLine() handler for MOCHAD_RFSEC messages (hardware/MochadTCP.cpp) copies network-received data from the up-to-1028-byte m_mochadbuffer into a fixed 50-byte stack buffer tempRFSECbuf using strcpy() with no length check, across three separate code branches (DS10A/KR10A/MS10A device types). An attacker on the local network segment able to reach the Mochad TCP bridge (default port 1099, no authentication) can send a crafted packet that overflows tempRFSECbuf by up to several hundred bytes, corrupting the Domoticz worker thread's stack. |
| It was not possible to govern the maximum number of transfer frames per incoming delivery, enabling an authenticated attacker to cause excessive resource usage and potential denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue. |
| @oblique/cli 15.4.0 contains an OS command injection vulnerability in the project creation functionality. The CLI constructs shell commands through string concatenation and executes them with execSync(). A user-controlled project-name argument is inserted into the shell command without proper neutralization, allowing shell metacharacters to execute additional operating-system commands when the CLI is invoked with a crafted project name. |
| The Orbit Fox: Duplicate Page, Menu Icons, SVG Support, Cookie Notice, Custom Fonts & More WordPress plugin before 3.0.8 does not sanitize uploaded SVG files when its SVG upload feature is enabled, allowing authenticated users with the upload capability (Author and above by default, without the unfiltered_html capability) to upload SVG files containing JavaScript that executes in the site context when the file is viewed, leading to Stored Cross-Site Scripting. |
| A flaw was found in the file-icns plugin in GIMP. When applying a decompressed mask during ICNS image processing, the plugin reads from the mask data buffer without verifying if the cursor exceeds the allocated resource size. If a crafted file contains a truncated mask resource, the icns_decompress function continues reading past the bounds of the buffer. This out-of-bounds read vulnerability results in information disclosure of heap contents, where memory contents are leaked as alpha channel pixel values, or a crash leading to a denial of service if unmapped memory is accessed. |
| A heap-buffer-overflow vulnerability exists in the APNG (Animated PNG) file loader of GIMP. This flaw occurs when the `fcTL` width exceeds the `IHDR` width, leading to pixel data being written past the end of a heap allocation. Additionally, a heap-based buffer overflow exists in the DDS plug-in due to a BPP mismatch in the `load_layer()` function. Both vulnerabilities can be triggered by opening a specially crafted image file, potentially leading to code execution. |
| A flaw was found in the file-fits plugin in GIMP. When processing a FITS image file, the plugin calculates memory allocation sizes using signed 32-bit integers for width and height. If a crafted file sets both values to large values, their product exceeds 2^31 and overflows, resulting in an undersized heap-based buffer allocation. This integer overflow issue results in a heap-based buffer overflow when cfitsio subsequently writes a full row of pixels in the buffer, causing memory corruption, potentially leading to arbitrary code execution or a denial of service. |
| The Passster WordPress plugin before 4.3.6 does not enforce its category-based content protection on the WordPress REST API, allowing unauthenticated users to read the full content, title, and excerpt of category-locked posts through the core REST API. |
| It was not possible to govern the maximum number of transfer frames per incoming delivery, enabling an authenticated attacker to cause excessive resource usage and potential denial of service.
This issue affects Apache Qpid ProtonJ2: through 1.1.0.
Users are recommended to upgrade to version 1.2.0, which fixes the issue |
| The Passster WordPress plugin before 4.3.6 outputs password-protected block content in the public page response before verifying the password, allowing unauthenticated users to recover the protected content without knowing the password. |
