| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix race in cpumap on PREEMPT_RT
On PREEMPT_RT kernels, the per-CPU xdp_bulk_queue (bq) can be accessed
concurrently by multiple preemptible tasks on the same CPU.
The original code assumes bq_enqueue() and __cpu_map_flush() run
atomically with respect to each other on the same CPU, relying on
local_bh_disable() to prevent preemption. However, on PREEMPT_RT,
local_bh_disable() only calls migrate_disable() (when
PREEMPT_RT_NEEDS_BH_LOCK is not set) and does not disable
preemption, which allows CFS scheduling to preempt a task during
bq_flush_to_queue(), enabling another task on the same CPU to enter
bq_enqueue() and operate on the same per-CPU bq concurrently.
This leads to several races:
1. Double __list_del_clearprev(): after bq->count is reset in
bq_flush_to_queue(), a preempting task can call bq_enqueue() ->
bq_flush_to_queue() on the same bq when bq->count reaches
CPU_MAP_BULK_SIZE. Both tasks then call __list_del_clearprev()
on the same bq->flush_node, the second call dereferences the
prev pointer that was already set to NULL by the first.
2. bq->count and bq->q[] races: concurrent bq_enqueue() can corrupt
the packet queue while bq_flush_to_queue() is processing it.
The race between task A (__cpu_map_flush -> bq_flush_to_queue) and
task B (bq_enqueue -> bq_flush_to_queue) on the same CPU:
Task A (xdp_do_flush) Task B (cpu_map_enqueue)
---------------------- ------------------------
bq_flush_to_queue(bq)
spin_lock(&q->producer_lock)
/* flush bq->q[] to ptr_ring */
bq->count = 0
spin_unlock(&q->producer_lock)
bq_enqueue(rcpu, xdpf)
<-- CFS preempts Task A --> bq->q[bq->count++] = xdpf
/* ... more enqueues until full ... */
bq_flush_to_queue(bq)
spin_lock(&q->producer_lock)
/* flush to ptr_ring */
spin_unlock(&q->producer_lock)
__list_del_clearprev(flush_node)
/* sets flush_node.prev = NULL */
<-- Task A resumes -->
__list_del_clearprev(flush_node)
flush_node.prev->next = ...
/* prev is NULL -> kernel oops */
Fix this by adding a local_lock_t to xdp_bulk_queue and acquiring it
in bq_enqueue() and __cpu_map_flush(). These paths already run under
local_bh_disable(), so use local_lock_nested_bh() which on non-RT is
a pure annotation with no overhead, and on PREEMPT_RT provides a
per-CPU sleeping lock that serializes access to the bq.
To reproduce, insert an mdelay(100) between bq->count = 0 and
__list_del_clearprev() in bq_flush_to_queue(), then run reproducer
provided by syzkaller. |
| radare2-mcp version 1.6.0 and earlier contains an os command injection vulnerability that allows remote attackers to execute arbitrary commands by bypassing the command filter through shell metacharacters in user-controlled input passed to r2_cmd_str(). Attackers can inject shell metacharacters through the jsonrpc interface parameters to achieve remote code execution on the host running radare2-mcp without requiring authentication. |
| radare2 prior to 6.1.4 contains a path traversal vulnerability in its project notes handling that allows attackers to read or write files outside the configured project directory by importing a malicious .zrp archive containing a symlinked notes.txt file. Attackers can craft a .zrp archive with a symlinked notes.txt that bypasses directory confinement checks, allowing note operations to follow the symlink and access arbitrary files outside the dir.projects root directory. |
| radare2 prior to 6.1.4 contains a path traversal vulnerability in project deletion that allows local attackers to recursively delete arbitrary directories by supplying absolute paths that escape the configured dir.projects root directory. Attackers can craft absolute paths to project marker files outside the project storage boundary to cause recursive deletion of attacker-chosen directories with permissions of the radare2 process, resulting in integrity and availability loss. |
| A weakness in SpiceJet’s public booking retrieval page permits full passenger booking details to be accessed using only a PNR and last name, with no authentication or verification mechanisms. This results in exposure of extensive personal, travel, and booking metadata to any unauthenticated user who can obtain or guess those basic inputs. The issue arises from improper access control on a sensitive data retrieval function. |
| A vulnerability in SpiceJet’s booking API allows unauthenticated users to query passenger name records (PNRs) without any access controls. Because PNR identifiers follow a predictable pattern, an attacker could systematically enumerate valid records and obtain associated passenger names. This flaw stems from missing authorization checks on an endpoint intended for authenticated profile access. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.0, the core security wrappers (secureAxiosRequest and secureFetch) intended to prevent Server-Side Request Forgery (SSRF) contain multiple logic flaws. These flaws allow attackers to bypass the allow/deny lists via DNS Rebinding (Time-of-Check Time-of-Use) or by exploiting the default configuration which fails to enforce any deny list. This vulnerability is fixed in 3.1.0. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.0, Flowise is vulnerable to a critical unauthenticated remote command execution (RCE) vulnerability. It can be exploited via a parameter override bypass using the FILE-STORAGE:: keyword combined with a NODE_OPTIONS environment variable injection. This allows for the execution of arbitrary system commands with root privileges within the containerized Flowise instance, requiring only a single HTTP request and no authentication or knowledge of the instance. This vulnerability is fixed in 3.1.0. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.0, the specific flaw exists within the run method of the Airtable_Agents class. The issue results from the lack of proper sandboxing when evaluating an LLM generated python script. Using prompt injection techniques, an unauthenticated attacker with the ability to send prompts to a chatflow using the Airtable Agent node may convince an LLM to respond with a malicious python script that executes attacker controlled commands on the flowise server. This vulnerability is fixed in 3.1.0. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.0, The CSVAgent allows providing a custom Pandas CSV read code. Due to lack of sanitization, an attacker can provide a command injection payload that will get interpolated and executed by the server. This vulnerability is fixed in 3.1.0. |
| An Improper Input Validation vulnerability in Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, adjacent attacker, sending a specific genuine BGP packet in an already established BGP session to reset only that session causing a Denial of Service (DoS).
An attacker repeatedly sending the packet will sustain the Denial of Service (DoS).This issue affects Junos OS:
* 25.2 versions before 25.2R2
This issue does not affect Junos OS versions before 25.2R1.
This issue affects Junos OS Evolved:
* 25.2-EVO versions before 25.2R2-EVO
This issue does not affect Junos OS Evolved versions before 25.2R1-EVO.
eBGP and iBGP are affected.
IPv4 and IPv6 are affected. |
| A logging issue was addressed with improved data redaction. This issue is fixed in iOS 18.7.8 and iPadOS 18.7.8, iOS 26.4.2 and iPadOS 26.4.2. Notifications marked for deletion could be unexpectedly retained on the device. |
| SWUpdate contains an integer underflow vulnerability in the multipart upload parser in mongoose_multipart.c that allows unauthenticated attackers to cause a denial of service by sending a crafted HTTP POST request to /upload with a malformed multipart boundary and controlled TCP stream timing. Attackers can trigger an integer underflow in the mg_http_multipart_continue_wait_for_chunk() function when the buffer length falls within a specific range, causing an out-of-bounds heap read that writes data beyond the allocated receive buffer to a local IPC socket. |
| In the Linux kernel, the following vulnerability has been resolved:
xdp: produce a warning when calculated tailroom is negative
Many ethernet drivers report xdp Rx queue frag size as being the same as
DMA write size. However, the only user of this field, namely
bpf_xdp_frags_increase_tail(), clearly expects a truesize.
Such difference leads to unspecific memory corruption issues under certain
circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when
running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses
all DMA-writable space in 2 buffers. This would be fine, if only
rxq->frag_size was properly set to 4K, but value of 3K results in a
negative tailroom, because there is a non-zero page offset.
We are supposed to return -EINVAL and be done with it in such case, but due
to tailroom being stored as an unsigned int, it is reported to be somewhere
near UINT_MAX, resulting in a tail being grown, even if the requested
offset is too much (it is around 2K in the abovementioned test). This later
leads to all kinds of unspecific calltraces.
[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6
[ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4
[ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000]
[ 7340.339230] in xskxceiver[42b5,400000+69000]
[ 7340.340300] likely on CPU 6 (core 0, socket 6)
[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe
[ 7340.340888] likely on CPU 3 (core 0, socket 3)
[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7
[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI
[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)
[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80
[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89
[ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202
[ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010
[ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff
[ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0
[ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0
[ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500
[ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000
[ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0
[ 7340.421237] PKRU: 55555554
[ 7340.421623] Call Trace:
[ 7340.421987] <TASK>
[ 7340.422309] ? softleaf_from_pte+0x77/0xa0
[ 7340.422855] swap_pte_batch+0xa7/0x290
[ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270
[ 7340.424102] zap_pte_range+0x281/0x580
[ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240
[ 7340.425177] unmap_page_range+0x24d/0x420
[ 7340.425714] unmap_vmas+0xa1/0x180
[ 7340.426185] exit_mmap+0xe1/0x3b0
[ 7340.426644] __mmput+0x41/0x150
[ 7340.427098] exit_mm+0xb1/0x110
[ 7340.427539] do_exit+0x1b2/0x460
[ 7340.427992] do_group_exit+0x2d/0xc0
[ 7340.428477] get_signal+0x79d/0x7e0
[ 7340.428957] arch_do_signal_or_restart+0x34/0x100
[ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0
[ 7340.430159] do_syscall_64+0x188/
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.
Let's say we bind() an UDP socket to the wildcard address with a
non-zero port, connect() it to an address, and disconnect it from
the address.
bind() sets SOCK_BINDPORT_LOCK on sk->sk_userlocks (but not
SOCK_BINDADDR_LOCK), and connect() calls udp_lib_hash4() to put
the socket into the 4-tuple hash table.
Then, __udp_disconnect() calls sk->sk_prot->rehash(sk).
It computes a new hash based on the wildcard address and moves
the socket to a new slot in the 4-tuple hash table, leaving a
garbage in the chain that no packet hits.
Let's remove such a socket from 4-tuple hash table when disconnected.
Note that udp_sk(sk)->udp_portaddr_hash needs to be udpated after
udp_hash4_dec(hslot2) in udp_unhash4(). |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: intel_pstate: Fix crash during turbo disable
When the system is booted with kernel command line argument "nosmt" or
"maxcpus" to limit the number of CPUs, disabling turbo via:
echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
results in a crash:
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
...
RIP: 0010:store_no_turbo+0x100/0x1f0
...
This occurs because for_each_possible_cpu() returns CPUs even if they
are not online. For those CPUs, all_cpu_data[] will be NULL. Since
commit 973207ae3d7c ("cpufreq: intel_pstate: Rearrange max frequency
updates handling code"), all_cpu_data[] is dereferenced even for CPUs
which are not online, causing the NULL pointer dereference.
To fix that, pass CPU number to intel_pstate_update_max_freq() and use
all_cpu_data[] for those CPUs for which there is a valid cpufreq policy. |
| In the Linux kernel, the following vulnerability has been resolved:
can: usb: f81604: handle short interrupt urb messages properly
If an interrupt urb is received that is not the correct length, properly
detect it and don't attempt to treat the data as valid. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix kernel stack leak in irdma_create_user_ah()
struct irdma_create_ah_resp { // 8 bytes, no padding
__u32 ah_id; // offset 0 - SET (uresp.ah_id = ah->sc_ah.ah_info.ah_idx)
__u8 rsvd[4]; // offset 4 - NEVER SET <- LEAK
};
rsvd[4]: 4 bytes of stack memory leaked unconditionally. Only ah_id is assigned before ib_respond_udata().
The reserved members of the structure were not zeroed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: cancel rfkill_block work in wiphy_unregister()
There is a use-after-free error in cfg80211_shutdown_all_interfaces found
by syzkaller:
BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220
Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326
CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events cfg80211_rfkill_block_work
Call Trace:
<TASK>
dump_stack_lvl+0x116/0x1f0
print_report+0xcd/0x630
kasan_report+0xe0/0x110
cfg80211_shutdown_all_interfaces+0x213/0x220
cfg80211_rfkill_block_work+0x1e/0x30
process_one_work+0x9cf/0x1b70
worker_thread+0x6c8/0xf10
kthread+0x3c5/0x780
ret_from_fork+0x56d/0x700
ret_from_fork_asm+0x1a/0x30
</TASK>
The problem arises due to the rfkill_block work is not cancelled when wiphy
is being unregistered. In order to fix the issue cancel the corresponding
work in wiphy_unregister().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Fix possible oob access in mt7996_mac_write_txwi_80211()
Check frame length before accessing the mgmt fields in
mt7996_mac_write_txwi_80211 in order to avoid a possible oob access. |
