| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in Active Backup for Business allows unauthorized remote attackers to read arbitrary files. |
| In Slican telephone exchanges it is possible to manage the control panel remotely. An unauthenticated attacker can connect to the modem via a telephone with a specific caller ID. This allows them to bypass admin authentication and gain full access to the service protocol and configuration panel. This vulnerability is independent of the telephone exchanges configuration. If remote access is disabled, calling with this caller ID will temporarily enable it.
This issue was fixed in versions below:
- IPL-256: version 6.61.0040
- IPM-032: version 6.61.0040
- CCT-1668: version 6.56.0430
- MAC-6400: version 6.56.0430
- CXS-0424: version 6.30.0510
The issue STILL EXISTS in End-Of-Life telephone exchanges in versions 4.xx and below:
- CCT-1668 (CCT1CPU)
- MAC-6400
- CXS-0424
These products were discontinued in 2011 and 2012 and and will not receive updates. These products require a hardware update in order to receive a software update. The vendor recommends that users of these devices contact the their service department directly to determine the options for upgrading. |
| In Slican telephone exchanges secure key is generated in a predictable manner using properties of the telephone exchange which can be obtained without authentication. An unauthenticated attacker can deduce the secure key and obtain admin credentials.
This issue was fixed in versions below:
- IPx series: version 6.61.0040
- CCT-1668: version 6.56.0430
- MAC-6400: version 6.56.0430
- CXS-0424: version 6.30.0510
The issue STILL EXISTS in End-Of-Life telephone exchanges in versions 4.xx and below:
- CCT-1668 (CCT1CPU)
- MAC-6400
- CXS-0424
These products were discontinued in 2011 and 2012 and and will not receive updates. These products require a hardware update in order to receive a software update. The vendor recommends that users of these devices contact the their service department directly to determine the options for upgrading. |
| An origin validation error vulnerability in Synology Active Backup for Business Agent before 3.1.0-4967 allows local users to write arbitrary files with restricted content during installation. |
| IBM Engineering Lifecycle Management 7.0.3 Interim Fix 001 through Interim Fix 021, 7.1.0 Interim Fix 001 through Interim Fix 009, and 7.2.0 and 7.2.0 Interim Fix 001 is vulnerable to an XML external entity injection (XXE) attack when processing XML data. An authenticated attacker could exploit this vulnerability to expose sensitive information or consume memory resources. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in IniLerm Advanced IP Blocker advanced-ip-blocker allows DOM-Based XSS.This issue affects Advanced IP Blocker: from n/a through <= 8.10.7. |
| A flaw was found in Keycloak, an open-source identity and access management solution. When a client application is configured to accept broad redirect Uniform Resource Identifiers (URIs), a remote attacker can manipulate the authentication process by crafting a special web address. If a user clicks this link, the client application might incorrectly prioritize attacker-controlled information over legitimate data. This vulnerability, known as HTTP parameter pollution, could allow an attacker to bypass security measures or gain unauthorized access to resources. |
| An low privileged remote attacker can exploit an unauthenticated SQL Injection vulnerability in the user_alarmprofile view due to improper neutralization of special elements in a SQL SELECT command. This can result in a total loss of confidentiality. |
| A highly authenticated attacker can alter the config generator injecting a payload into future created configurations. The device is not correctly checking this configuration value before passing it to an system execute leading to code execution. This can result in a total loss of confidentiality, integrity and availability. |
| Improperly validated order clauses lead to a SQL injection vulnerability in com_tags. |
| IBM InfoSphere Optim Test Data Fabrication 1.0.0, 1.0.0.1, 1.0.0.2, 1.0.2, 1.0.2.2, 1.0.2.3, 1.0.2.4, 1.0.2.5, 1.0.2.6, 1.0.2.7 could allow a remote attacker to traverse directories on the system. An attacker could send a specially crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system |
| An improper validation of user-supplied input leads to a local file inclusion vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix ntfs_mount_options leak in ntfs_fill_super()
In ntfs_fill_super(), the fc->fs_private pointer is set to NULL without
first freeing the memory it points to. This causes the subsequent call to
ntfs_fs_free() to skip freeing the ntfs_mount_options structure.
This results in a kmemleak report:
unreferenced object 0xff1100015378b800 (size 32):
comm "mount", pid 582, jiffies 4294890685
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 ed ff ed ff 00 04 00 00 ................
backtrace (crc ed541d8c):
__kmalloc_cache_noprof+0x424/0x5a0
__ntfs_init_fs_context+0x47/0x590
alloc_fs_context+0x5d8/0x960
__x64_sys_fsopen+0xb1/0x190
do_syscall_64+0x50/0x1f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
This issue can be reproduced using the following commands:
fallocate -l 100M test.file
mount test.file /tmp/test
Since sbi->options is duplicated from fc->fs_private and does not
directly use the memory allocated for fs_private, it is unnecessary to
set fc->fs_private to NULL.
Additionally, this patch simplifies the code by utilizing the helper
function put_mount_options() instead of open-coding the cleanup logic. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Initialize new folios before use
KMSAN reports an uninitialized value in longest_match_std(), invoked
from ntfs_compress_write(). When new folios are allocated without being
marked uptodate and ni_read_frame() is skipped because the caller expects
the frame to be completely overwritten, some reserved folios may remain
only partially filled, leaving the rest memory uninitialized. |
| Improper Certificate Validation vulnerability in Erlang OTP public_key (pubkey_ocsp module) allows forged OCSP responses signed with an expired responder certificate to be accepted as valid.
OCSP response verification in pubkey_ocsp:verify_response/5 and pubkey_ocsp:is_authorized_responder/3 in lib/public_key/src/pubkey_ocsp.erl does not check the validity period (notBefore/notAfter) of the OCSP responder certificate. An attacker who has obtained the private key of an expired CA-designated OCSP responder certificate can forge OCSP responses that Erlang/OTP accepts as valid.
This affects TLS clients using OCSP stapling via the ssl application: a malicious or compromised server can present a revoked TLS certificate together with a forged OCSP response signed by an expired responder key, and the client will accept the revoked certificate as valid. It also affects applications calling public_key:pkix_ocsp_validate/5 directly, where the impact depends on the use case — server-side client certificate validation using this API may allow authentication bypass with a revoked client certificate.
This issue affects OTP from OTP 27.0 before OTP 27.3.4.12, 28.5.0.1, and 29.0.1 corresponding to public_key from 1.16 before 1.17.1.3, 1.20.3.1, and 1.21.1. |
| Improper Following of a Certificate's Chain of Trust vulnerability in Erlang OTP public_key (pubkey_cert module) allows a non-CA certificate to be accepted as an intermediate issuer, enabling certificate chain forgery.
In lib/public_key/src/pubkey_cert.erl, pubkey_cert:validate_extensions/7 contains two flaws that together allow a certificate with basicConstraints cA:false and no keyUsage extension to be used as an intermediate issuer in a chain passed to public_key:pkix_path_validation/3: the cA:false clause recurses into the remaining extensions without rejecting the certificate when it is in issuer position, and the keyUsage check only fires when the extension is present, so a certificate lacking keyUsage entirely bypasses the keyCertSign enforcement.
Any party holding an end-entity certificate with basicConstraints cA:false and no keyUsage extension, issued by any CA in the victim's trust store, can use that certificate's private key to sign forged leaf certificates for arbitrary identities. public_key:pkix_path_validation/3 accepts the resulting chain, and by extension every TLS or mTLS endpoint built on the OTP ssl application that relies on the default verifier is affected, including server identity verification on the client side and client certificate verification on mTLS servers.
This issue affects OTP from OTP 17.0 before OTP 26.2.5.21, 27.3.4.12, 28.5.0.1, and 29.0.1 corresponding to public_key from 0.22 before 1.15.1.7, 1.17.1.3, 1.20.3.1, and 1.21.1. |
| IBM MQ Operator SC2: v3.2.0 through 3.2.23CD: v3.3.0, v3.4.0, v3.4.1, v3.5.0, v3.5.1 - v3.5.3, v3.6.0 - v3.6.4, v3.7.0 - v3.7.2, v3.8.0, v3.8.1, v3.9.0, v3.9.1LTS: v2.0.0 - 2.0.29 and IBM supplied MQ Advanced container images SC2: 9.4.0.6 through r1, 9.4.0.6-r2, 9.4.0.7-r1, 9.4.0.10-r1, 9.4.0.10-r2, 9.4.0.11-r1, 9.4.0.11-r2, 9.4.0.11-r3, 9.4.0.12-r1, 9.4.0.15-r1 - 9.4.0.15-r4, 9.4.0.16-r1, 9.4.0.16-r2, 9.4.0.17-r1, 9.4.0.17-r2, 9.4.0.20-r1CD: 9.4.1.0-r1, 9.4.1.0-r2, 9.4.1.1-r1, 9.4.2.0-r1, 9.4.2.0-r2, 9.4.2.1-r1, 9.4.2.1-r2, 9.4.3.0-r1, 9.4.3.0-r2, 9.4.3.1-r1 - 9.4.3.1-r3, 9.4.4.0-r1 - 9.4.4.0-r4, 9.4.4.1-r1, 9.4.5.0-r1, 9.4.5.0-r2LTS: 9.3.0.0-r1, 9.3.0.0-r2, 9.3.0.0-r3, 9.3.0.1-r1, 9.3.0.1-r2, 9.3.0.1-r3, 9.3.0.1-r4, 9.3.0.3-r1, 9.3.0.4-r1, 9.3.0.4-r2, 9.3.0.5-r1, 9.3.0.5-r2, 9.3.0.5-r3, 9.3.0.6-r1, 9.3.0.10-r1, 9.3.0.10-r2, 9.3.0.11-r1,9.3.0.11-r2, 9.3.0.15-r1, 9.3.0.16-r1, 9.3.0.16-r2, 9.3.0.17-r1, 9.3.0.17-r2, 9.3.0.17-r3, 9.3.0.20-r1, 9.3.0.20-r2, 9.3.0.21-r1, 9.3.0.21-r2, 9.3.0.21-r3, 9.3.0.25-r1, 9.4.0.0-r1, 9.4.0.0-r2, 9.4.0.0-r3, 9.4.0.5-r1, 9.4.0.5-r2 IBM MQ stores potentially sensitive information in log files that could be read by a local user. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't set EXT4_GET_BLOCKS_CONVERT when splitting before submitting I/O
When allocating blocks during within-EOF DIO and writeback with
dioread_nolock enabled, EXT4_GET_BLOCKS_PRE_IO was set to split an
existing large unwritten extent. However, EXT4_GET_BLOCKS_CONVERT was
set when calling ext4_split_convert_extents(), which may potentially
result in stale data issues.
Assume we have an unwritten extent, and then DIO writes the second half.
[UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUUUUUUUUUUU] extent status tree
|<- ->| ----> dio write this range
First, ext4_iomap_alloc() call ext4_map_blocks() with
EXT4_GET_BLOCKS_PRE_IO, EXT4_GET_BLOCKS_UNWRIT_EXT and
EXT4_GET_BLOCKS_CREATE flags set. ext4_map_blocks() find this extent and
call ext4_split_convert_extents() with EXT4_GET_BLOCKS_CONVERT and the
above flags set.
Then, ext4_split_convert_extents() calls ext4_split_extent() with
EXT4_EXT_MAY_ZEROOUT, EXT4_EXT_MARK_UNWRIT2 and EXT4_EXT_DATA_VALID2
flags set, and it calls ext4_split_extent_at() to split the second half
with EXT4_EXT_DATA_VALID2, EXT4_EXT_MARK_UNWRIT1, EXT4_EXT_MAY_ZEROOUT
and EXT4_EXT_MARK_UNWRIT2 flags set. However, ext4_split_extent_at()
failed to insert extent since a temporary lack -ENOSPC. It zeroes out
the first half but convert the entire on-disk extent to written since
the EXT4_EXT_DATA_VALID2 flag set, but left the second half as unwritten
in the extent status tree.
[0000000000SSSSSS] data S: stale data, 0: zeroed
[WWWWWWWWWWWWWWWW] on-disk extent W: written extent
[WWWWWWWWWWUUUUUU] extent status tree
Finally, if the DIO failed to write data to the disk, the stale data in
the second half will be exposed once the cached extent entry is gone.
Fix this issue by not passing EXT4_GET_BLOCKS_CONVERT when splitting
an unwritten extent before submitting I/O, and make
ext4_split_convert_extents() to zero out the entire extent range
to zero for this case, and also mark the extent in the extent status
tree for consistency. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix use-after-free in iomap inline data write path
The inline data buffer head (dibh) is being released prematurely in
gfs2_iomap_begin() via release_metapath() while iomap->inline_data
still points to dibh->b_data. This causes a use-after-free when
iomap_write_end_inline() later attempts to write to the inline data
area.
The bug sequence:
1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode
metadata into dibh
2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode)
3. Calls release_metapath() which calls brelse(dibh), dropping refcount
to 0
4. kswapd reclaims the page (~39ms later in the syzbot report)
5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data
6. KASAN detects use-after-free write to freed memory
Fix by storing dibh in iomap->private and incrementing its refcount
with get_bh() in gfs2_iomap_begin(). The buffer is then properly
released in gfs2_iomap_end() after the inline write completes,
ensuring the page stays alive for the entire iomap operation.
Note: A C reproducer is not available for this issue. The fix is based
on analysis of the KASAN report and code review showing the buffer head
is freed before use.
[agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid
leaks in gfs2_iomap_get() and gfs2_iomap_alloc().] |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: never defer requests during idmap lookup
During v4 request compound arg decoding, some ops (e.g. SETATTR)
can trigger idmap lookup upcalls. When those upcall responses get
delayed beyond the allowed time limit, cache_check() will mark the
request for deferral and cause it to be dropped.
This prevents nfs4svc_encode_compoundres from being executed, and
thus the session slot flag NFSD4_SLOT_INUSE never gets cleared.
Subsequent client requests will fail with NFSERR_JUKEBOX, given
that the slot will be marked as in-use, making the SEQUENCE op
fail.
Fix this by making sure that the RQ_USEDEFERRAL flag is always
clear during nfs4svc_decode_compoundargs(), since no v4 request
should ever be deferred. |
