| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| H3C HDM Family-A verifies the RSA signature of a firmware image against a public key it reads from the mutable file `/conf/public.pem`. That file is writable by an authenticated Redfish client through the `UpdateService.UploadSignKey` action, which stores the uploaded body verbatim after validating only that the multipart filename ends in `.pem`. An administrator, or any account with `firmware-update` privilege, can therefore replace the trust anchor with their own key, sign a malicious image with the matching private key, and have it pass verification. Family-A has no hardware root-of-trust (no PFR) to catch the substituted key.
This was observed on H3C HDM Family-A G5 HDM 6.14.01. H3C HDM Family-A G3/G5 builds carrying the Redfish/DRE update tree appear to be affected. HDM2 uses a different update path and is not covered by this finding. |
| Locust through 2.46.7 contains a cross-site request forgery vulnerability that allows remote attackers to stop load tests or reset statistics via GET requests to /stop and /stats/reset. Attackers can lure an operator to a malicious page triggering cross-site GET requests, terminating running swarms and wiping recorded performance results. |
| Open and provider-neutral, LoopX is a lightweight state kernel and local-first control plane for loop engineering. From version 0.0.1 until 0.4.5, `loopx serve-status` in `loopx/status_server.py` uses `StatusRequestHandler._send_json()` and `do_OPTIONS()` to send `Access-Control-Allow-Origin: *` for unauthenticated responses on predictable loopback ports. A remote attacker can cause an operator who visits attacker-controlled web content to issue cross-origin requests to `GET /status.json`, `GET /review-material?goal_id=...&path=...`, `GET /`, and `POST /control-plane/configure-goal/dry-run`, exposing control-plane state, goal and run information, local absolute paths, private Markdown files below registered goal roots, and dry-run configuration projections. The affected routes do not provide cross-origin writes or arbitrary-file access. This issue is fixed in version 0.4.5. |
| In `api-gateway` versions till `1.7.3`, The default rate-limit key resolver, `ClientIpKeyResolver`, derives the per-client bucket key from the leftmost element of the `X-Forwarded-For` request header. That element is supplied by the originating HTTP client and is not validated against any trusted-proxy list. A single attacker can therefore obtain an unlimited number of independent rate-limit buckets — one per unique header value — and completely bypass the gateway's request-rate limiting on every route that uses the shipped default configuration. |
| The Simple Shopping Cart WordPress plugin before 5.3.3 does not verify submitted product prices against a value only the site owner can set, allowing users with the Contributor role and above to register attacker-chosen prices for existing products, which any visitor can then use to add those products to the cart at that price. |
| filelock is a platform-independent file lock for Python. From 3.22.0 until 4.2.1, SoftFileLock can trust a forged process identifier in a marker that an attacker can modify but cannot remove, allowing an authorized contender such as another process of the holder's account or root to act as a confused deputy, remove the live marker, and admit another holder. This issue is fixed in version 4.2.1. |
| Red Hat Product Security has determined that this is not a vulnerability in bootc or containers-common. bootc fetches images under /etc/containers/policy.json. The shipped default is insecureAcceptAnything for registries without an explicit signature requirement; registry.redhat.io and registry.access.redhat.com require signatures. Updating a mutable tag requires the ability to publish to the reference an administrator has already configured the host to follow. Requiring signatures is available through that policy and through bootc enforce-container-sigpolicy, which is off by default. Persistence of /var across bootc rollback is expected image-mode behavior. |
| The Coinbase Commerce Payment Gateway for WooCommerce WordPress plugin through 1.4.1 does not verify the authenticity of incoming payment webhook notifications, because the shared secret used to validate the request signature is empty by default and nothing rejects an unconfigured secret, allowing unauthenticated attackers to forge notifications that mark arbitrary orders as paid or cancel already-paid orders. |
| The iPOSpays Payment Gateway for WooCommerce WordPress plugin before 1.4.7 does not verify that a payment was actually completed before recording an order as paid, allowing unauthenticated users to mark any unpaid order as paid and to rewrite its total. |
| CCC Attestation SIG attested-tls-poc through commit 731ca82 fails to bind early attestation Evidence to the TLS connection, allowing attackers to relay valid Evidence from a genuine attester. Attackers holding an extracted attested TLS private key can forward the relying party's nonce to a genuine attester and replay its Evidence to impersonate the attested workload and intercept data. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix stale per-CPU tcp_tw_isn leak enabling ISN prediction
Blamed commit moved the TIME_WAIT-derived ISN from the skb control
block to a per-CPU variable, assuming the value would always be consumed
by tcp_conn_request() for the same packet that wrote it. That assumption
is violated by multiple drop paths between the producer
(__this_cpu_write(tcp_tw_isn, isn) in tcp_v{4,6}_rcv()) and the consumer
(tcp_conn_request()):
- min_ttl / min_hopcount check
- xfrm policy check
- tcp_inbound_hash() MD5/AO mismatch
- tcp_filter() eBPF/SO_ATTACH_FILTER drop
- th->syn && th->fin discard in tcp_rcv_state_process() TCP_LISTEN
- psp_sk_rx_policy_check() in tcp_v{4,6}_do_rcv()
- tcp_checksum_complete() in tcp_v{4,6}_do_rcv()
- tcp_v{4,6}_cookie_check() returning NULL
When a packet is dropped on any of these paths, tcp_tw_isn is left set.
The next SYN processed on the same CPU then consumes the non zero value in
tcp_conn_request(), receiving a potentially predictable ISN.
This patch moves back tcp_tw_isn to skb->cb[], getting rid of the per-cpu
variable.
Note that tcp_v{4,6}_fill_cb() do not set it.
Very litle impact on overall code size/complexity:
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7)
Function old new delta
tcp_v6_rcv 3038 3042 +4
tcp_v4_rcv 3035 3039 +4
tcp_conn_request 2938 2923 -15
Total: Before=24436060, After=24436053, chg -0.00% |
| The Simple Shopping Cart WordPress plugin before 5.3.3 does not verify that a PayPal payment notification is for a payment received by the site owner's PayPal account in its default configuration, allowing unauthenticated attackers to have their orders marked as paid using a payment made to an account they control. |
| The Payment Gateway for Telcell WordPress plugin before 2.0.5 does not verify the authenticity of incoming payment notifications, because the secret used to sign them is empty by default, allowing unauthenticated attackers to forge a valid notification and mark arbitrary WooCommerce orders as paid. The same handler also marks an attacker-chosen order as failed when given an invalid signature. |
| The Document Gallery WordPress plugin through 5.1.1 does not verify the signature on one of its unauthenticated webhook endpoints when no shared secret has been configured, which is the default state, allowing unauthenticated users to replace the thumbnail image the site publishes for any document. |
| Origin validation error in .NET allows an unauthorized attacker to disclose information over a network. |
| In Eclipse ioFog Controller versions 3.8.0 through 3.9.1, operator WebSocket upgrades on the exec and log routes do not verify the bearer JWT. The payload is decoded and its groups or roles are used as RBAC subjects. A self-minted token whose groups contain admin matches the built-in admin role, with no account and no RoleBinding. The attacker can open an exec or log session for a microservice or fog whose UUID they already know. HTTP routes are not affected: they verify the token before RBAC. Agent WebSockets verify the fog token and are not affected. |
| Use of a less trusted source in the DKIM signing of Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote unauthenticated attacker to have mail they write signed with the DKIM key of a domain the server hosts, so that it passes DKIM and DMARC for that domain at other receivers. With DKIM signing enabled for a hosted domain, the server signed every message on its first delivery pass as the domain named in its From header, before local delivery, whatever the message's origin and without checking that its sender had authenticated. A sender anywhere could therefore send the server, as ordinary inbound mail, a message whose From is any address at such a domain, and the server signed it with that domain's key. Every copy the server then sent on to an address outside carried a valid signature aligned with the forged From, whatever the domain's DMARC policy: an account's forward, a mail rule's forward or copy, a Sieve redirect, an alias or distribution list with an outside member, the mirror copy, a managed-list or journal copy, or a message released from quarantine. A signed copy can also be re-sent to other recipients while the domain's key is unchanged. Exploitation needs DKIM signing to be enabled for the hosted domain (it is off until configured) and, for the forgery to leave the server, a forward, alias, list or rule that carries the domain's mail to an outside address. The signer likewise signed a message submitted over authenticated SMTP as whatever hosted domain its From header named, a header authenticated SMTP does not hold to the submitting account, so that an account of one hosted domain could have mail written in the name of another hosted domain signed with that domain's key; this mattered where the server holds signed-in senders to their own envelope addresses (SmtpAuthenticatedSenderCheck, off by default), as the signature was then the remaining way for such mail to pass the other domain's DMARC policy. |
| MobaXterm Personal Edition (Portable) 26.4 GA extracts the CygUtils64.plugin file without first verifying its integrity. A local attacker with write permissions on this file can replace the ‘bin/cygwin1.dll’ library contained within it with a malicious library. When the victim opens a Local Shell session or uses a Cygwin-based function, the application extracts the component and loads the tampered library, executing code with the victim’s permissions. Exploitation requires write access to the plugin and does not, in itself, involve privilege escalation. |
| A vulnerability in the firmware upgrade functionality could allow an authenticated attacker to upload a forged firmware upgrade file, potentially compromising the device permanently. |
| Missing expiration, hash, and length enforcement in delegated metadata validation in awslabs/tough before tough-v0.22.0 allows remote authenticated users with delegated signing authority to bypass TUF specification integrity checks for delegated targets metadata and poison the local metadata cache, because load_delegations does not apply the same validation checks as the top-level targets metadata path.
We recommend you upgrade to tough-v0.22.0 / tuftool-v0.15.0. |
