| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Cross Site Scripting vulnerability in DerbyNet v9.0 and below allows attackers to execute arbitrary code via the checkin.php component. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JavaFX). Supported versions that are affected are Oracle Java SE: 8u391; Oracle GraalVM Enterprise Edition: 20.3.12 and 21.3.8. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM Enterprise Edition. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Java SE, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 3.1 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:L/I:N/A:N). |
| Espeak-ng 1.52-dev was discovered to contain a Floating Point Exception via the function PeaksToHarmspect at wavegen.c. |
| gifsicle-1.94 was found to have a floating point exception (FPE) vulnerability via resize_stream at src/xform.c. |
| eventlet before 0.35.2, as used in dnspython before 2.6.0, allows remote attackers to interfere with DNS name resolution by quickly sending an invalid packet from the expected IP address and source port, aka a "TuDoor" attack. In other words, dnspython does not have the preferred behavior in which the DNS name resolution algorithm would proceed, within the full time window, in order to wait for a valid packet. NOTE: dnspython 2.6.0 is unusable for a different reason that was addressed in 2.6.1. |
| Cacti provides an operational monitoring and fault management framework. Prior to version 1.2.27, Cacti calls `compat_password_hash` when users set their password. `compat_password_hash` use `password_hash` if there is it, else use `md5`. When verifying password, it calls `compat_password_verify`. In `compat_password_verify`, `password_verify` is called if there is it, else use `md5`. `password_verify` and `password_hash` are supported on PHP < 5.5.0, following PHP manual. The vulnerability is in `compat_password_verify`. Md5-hashed user input is compared with correct password in database by `$md5 == $hash`. It is a loose comparison, not `===`. It is a type juggling vulnerability. Version 1.2.27 contains a patch for the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: mmc_test: Fix NULL dereference on allocation failure
If the "test->highmem = alloc_pages()" allocation fails then calling
__free_pages(test->highmem) will result in a NULL dereference. Also
change the error code to -ENOMEM instead of returning success. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: only mark 'subflow' endp as available
Adding the following warning ...
WARN_ON_ONCE(msk->pm.local_addr_used == 0)
... before decrementing the local_addr_used counter helped to find a bug
when running the "remove single address" subtest from the mptcp_join.sh
selftests.
Removing a 'signal' endpoint will trigger the removal of all subflows
linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with
rm_type == MPTCP_MIB_RMSUBFLOW. This will decrement the local_addr_used
counter, which is wrong in this case because this counter is linked to
'subflow' endpoints, and here it is a 'signal' endpoint that is being
removed.
Now, the counter is decremented, only if the ID is being used outside
of mptcp_pm_nl_rm_addr_or_subflow(), only for 'subflow' endpoints, and
if the ID is not 0 -- local_addr_used is not taking into account these
ones. This marking of the ID as being available, and the decrement is
done no matter if a subflow using this ID is currently available,
because the subflow could have been closed before. |
| printer_write in drivers/usb/gadget/function/f_printer.c in the Linux kernel through 6.7.4 does not properly call usb_ep_queue, which might allow attackers to cause a denial of service or have unspecified other impact. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Scripting). Supported versions that are affected are Oracle Java SE: 8u391, 8u391-perf, 11.0.21; Oracle GraalVM for JDK: 17.0.9; Oracle GraalVM Enterprise Edition: 20.3.12, 21.3.8 and 22.3.4. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 5.9 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| When curl is asked to use HSTS, the expiry time for a subdomain might
overwrite a parent domain's cache entry, making it end sooner or later than
otherwise intended.
This affects curl using applications that enable HSTS and use URLs with the
insecure `HTTP://` scheme and perform transfers with hosts like
`x.example.com` as well as `example.com` where the first host is a subdomain
of the second host.
(The HSTS cache either needs to have been populated manually or there needs to
have been previous HTTPS accesses done as the cache needs to have entries for
the domains involved to trigger this problem.)
When `x.example.com` responds with `Strict-Transport-Security:` headers, this
bug can make the subdomain's expiry timeout *bleed over* and get set for the
parent domain `example.com` in curl's HSTS cache.
The result of a triggered bug is that HTTP accesses to `example.com` get
converted to HTTPS for a different period of time than what was asked for by
the origin server. If `example.com` for example stops supporting HTTPS at its
expiry time, curl might then fail to access `http://example.com` until the
(wrongly set) timeout expires. This bug can also expire the parent's entry
*earlier*, thus making curl inadvertently switch back to insecure HTTP earlier
than otherwise intended. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: ignore unknown extended permissions
When evaluating extended permissions, ignore unknown permissions instead
of calling BUG(). This commit ensures that future permissions can be
added without interfering with older kernels. |
| Mbed TLS before 3.6.4 has a NULL pointer dereference because mbedtls_asn1_store_named_data can trigger conflicting data with val.p of NULL but val.len greater than zero. |
| Jinja is an extensible templating engine. Prior to 3.1.5, An oversight in how the Jinja sandboxed environment detects calls to str.format allows an attacker that controls the content of a template to execute arbitrary Python code. To exploit the vulnerability, an attacker needs to control the content of a template. Whether that is the case depends on the type of application using Jinja. This vulnerability impacts users of applications which execute untrusted templates. Jinja's sandbox does catch calls to str.format and ensures they don't escape the sandbox. However, it's possible to store a reference to a malicious string's format method, then pass that to a filter that calls it. No such filters are built-in to Jinja, but could be present through custom filters in an application. After the fix, such indirect calls are also handled by the sandbox. This vulnerability is fixed in 3.1.5. |
| The OWASP ModSecurity Core Rule Set (CRS) is affected by a response body bypass. A client can issue an HTTP Accept header field containing an optional "charset" parameter in order to receive the response in an encoded form. Depending on the "charset", this response can not be decoded by the web application firewall. A restricted resource, access to which would ordinarily be detected, may therefore bypass detection. The legacy CRS versions 3.0.x and 3.1.x are affected, as well as the currently supported versions 3.2.1 and 3.3.2. Integrators and users are advised to upgrade to 3.2.2 and 3.3.3 respectively. |
| ServiceNow has addressed an input validation vulnerability that was identified in the Washington DC, Vancouver, and earlier Now Platform releases. This vulnerability could enable an unauthenticated user to remotely execute code within the context of the Now Platform. The vulnerability is addressed in the listed patches and hot fixes below, which were released during the June 2024 patching cycle. If you have not done so already, we recommend applying security patches relevant to your instance as soon as possible. |
| A vulnerability has been found in HuangDou UTCMS 9. This vulnerability affects unknown code of the file app/modules/ut-frame/admin/login.php of the component Login. Such manipulation of the argument code leads to incorrect comparison. The attack can be executed remotely. The attack requires a high level of complexity. It is stated that the exploitability is difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Due to a Protection Mechanism Failure in SAP
NetWeaver Application Server for ABAP and ABAP Platform, a developer can bypass
the configured malware scanner API because of a programming error. This leads
to a low impact on the application's confidentiality, integrity, and
availability. |
| Microsoft Publisher Security Feature Bypass Vulnerability |
| Internet Shortcut Files Security Feature Bypass Vulnerability |
