Export limit exceeded: 399868 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (399868 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97445 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Enhance buffer validation in acpi_ut_walk_aml_resources() Enhance buffer validation in acpi_ut_walk_aml_resources() to prevent buffer overflows. | ||||
| CVE-2026-97454 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: add boundary checks in acpi_ps_get_next_field() Add boundary checks in acpi_ps_get_next_field() to prevent out-of-bounds access. | ||||
| CVE-2026-97991 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vdpa_sim_blk: reject out-of-range sector starts vdpasim_blk_check_range() logs an invalid start sector but continues validating the request. The subsequent unsigned capacity subtraction can underflow and let an out-of-range buffer offset reach the data path. The invalid offset is used by three request paths. VIRTIO_BLK_T_OUT copies guest data to blk->buffer + offset through vringh_iov_pull_iotlb(), causing an out-of-bounds write in _copy_from_iter() or memcpy(). VIRTIO_BLK_T_IN copies from blk->buffer + offset to the guest through vringh_iov_push_iotlb(), causing an out-of-bounds read in _copy_to_iter(). VIRTIO_BLK_T_WRITE_ZEROES passes blk->buffer + offset to memset(), causing an out-of-bounds write. Reject starts at or beyond the capacity before the subtraction. Treat the capacity boundary as invalid because the IN and OUT paths round byte counts down to sectors for validation but later copy the original byte counts. A sub-sector request at the capacity boundary would otherwise still access past the end of the buffer. I found this bug myself, though the patch was written with AI assistance. | ||||
| CVE-2026-97992 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: protect config_ctx from being freed under the config callback vhost_vdpa_config_cb() loads v->config_ctx and signals it without taking a reference and without holding any lock: struct eventfd_ctx *config_ctx = v->config_ctx; if (config_ctx) eventfd_signal(config_ctx); VHOST_VDPA_SET_CONFIG_CALL replaces that field and drops what is normally the last reference to the old context: swap(ctx, v->config_ctx); if (ctx) eventfd_ctx_put(ctx); eventfd_ctx_put() drops the last kref and frees the context immediately, with no RCU grace period, so a callback that has already loaded the pointer goes on to dereference freed memory. The two sides share no lock: the ioctl runs under vhost_dev.mutex, while the parent invokes the callback from its own interrupt or workqueue context. This is not the reopen refcount underflow fixed by commit f6bbf0010ba0 ("vhost-vdpa: fix use-after-free of v->config_ctx"), which was about vhost_vdpa_config_put() leaving a stale pointer behind. Here the pointer is maintained correctly and it is the read side that is unprotected. With VDUSE as the parent this is reachable from userspace with access to /dev/vduse (root by default). VDUSE_DEV_INJECT_CONFIG_IRQ queues dev->inject, and vduse_dev_irq_inject() runs the callback under VDUSE's own dev->irq_lock, which vhost does not hold. vduse_dev_reset() does flush_work(&dev->inject), but VHOST_VDPA_SET_CONFIG_CALL never goes through reset, so an inject already in flight is not waited for. A process that injects config interrupts on the VDUSE fd while another thread swaps the call fd on the vhost-vdpa fd hits it in seconds: BUG: KASAN: slab-use-after-free in native_queued_spin_lock_slowpath Read of size 4 at addr ffff888107d21808 by task kworker/u17:1/2993 Workqueue: vduse-irq vduse_dev_irq_inject Call Trace: native_queued_spin_lock_slowpath+0x97/0x5b0 _raw_spin_lock_irqsave+0xd4/0xe0 eventfd_signal_mask+0x69/0x120 vhost_vdpa_config_cb+0x34/0x50 vduse_dev_irq_inject+0x46/0x60 process_one_work+0x468/0x950 Allocated by task 2992: do_eventfd+0x50/0x200 __x64_sys_eventfd2+0x2e/0x40 Freed by task 2992: eventfd_ctx_put+0xb9/0xc0 vhost_vdpa_unlocked_ioctl+0x116c/0x2190 Add a spinlock covering every access to config_ctx, so the callback either signals a context that is still alive or observes NULL, and the put happens only once no callback can reach the old value. Clearing the parent's callback before the put would not be enough: of the in-tree set_config_cb() implementations only VDUSE takes a lock, the rest store the pointer unlocked, so that would not order against an in-flight invocation. | ||||
| CVE-2026-97527 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock The fcport->unsol_ctx_head list is modified from several contexts without a common lock. Entries are added in qla2xxx_process_purls_iocb() from the response queue ISR (under the qpair qp_lock), while they are removed from qla2xxx_process_purls_pkt() (DPC/purex worker), qla_nvme_xmt_ls_rsp() (NVMe-FC transport callback) and qla_nvme_release_lsrsp_cmd_kref() (SRB completion). The qpair qp_lock cannot serialize this per-fcport list since multiqueue adapters add entries through different qpairs, so a concurrent add and delete (or two concurrent deletes) can corrupt the list pointers. Introduce a dedicated per-fcport spinlock, unsol_ctx_lock, initialized in qla2x00_alloc_fcport(), and take it around every list_add_tail()/list_del() on unsol_ctx_head. The add nests under the existing qp_lock; no delete path takes qp_lock, so the lock order is consistent and deadlock free. | ||||
| CVE-2026-97575 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate AV1 tile counts The stateless AV1 decoders use tile_info.tile_cols and tile_rows as loop bounds and as indices into the mi_*_starts[] and *_in_sbs_minus_1[] arrays, as the divisor for context_update_tile_id, and their product bounds the per-tile descriptor buffers, but std_validate_compound() does not bound these u8 fields. Reject a V4L2_CTRL_TYPE_AV1_FRAME whose tile_cols or tile_rows exceeds V4L2_AV1_MAX_TILE_COLS / _ROWS, or whose product exceeds V4L2_AV1_MAX_TILE_COUNT. A zero tile count is left to the consuming driver so the zero-initialised control that existing userspace submits is still accepted. | ||||
| CVE-2026-98000 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: Fix potential UAF in pec_store Sashiko reports: In pec_store(), a guard(mutex)(&hwdev->lock) is taken. If the chip write operation returns an error other than -EOPNOTSUPP, the code jumps to the put label, which calls put_device(hdev). If this drops the final reference, the device is freed. When the function then returns, the guard cleanup function runs and attempts to unlock the freed mutex. Use scoped_guard() instead of guard() to avoid the problem. | ||||
| CVE-2026-98003 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Do not reallocate GA log buffers on resume Commit c5e1a1eb9279 ("iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement") moved the GA log allocation from iommu_init_pci() to enable_iommus_vapic(), which is called on every resume. iommu_init_ga_log() assigns iommu->ga_log and iommu->ga_log_tail unconditionally. Each resume therefore replaces the boot-time pointers and leaks both old allocations. The function also uses GFP_KERNEL from a syscore resume callback, where interrupts are disabled and the non-boot CPUs are offline. Return early if both buffers are already allocated. Clear the pointers in free_ga_log() so a partial allocation failure cannot leave ga_log dangling. | ||||
| CVE-2026-98015 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch: fix use-after-free in mlx5_eswitch_termtbl_put In mlx5_eswitch_termtbl_put(), the zero-ref cleanup check reads tt->ref_count after termtbl_mutex has been released. Two concurrent callers on the same mlx5_termtbl_handle race: one decrements ref_count to zero, removes the hash entry, and calls kfree(tt) while the other has already dropped the mutex and is about to evaluate if (!tt->ref_count), producing a use-after-free. Fix this by capturing the result of the decrement into a stack-local last variable before dropping the mutex. The cleanup decision is now made entirely under termtbl_mutex, and tt is not touched after kfree. | ||||
| CVE-2026-96272 | 1 Clip-bucket | 1 Clipbucket | 2026-09-26 | 7.5 High |
| ClipBucket v5 before 5.5.3-#182 contains a blind SQL injection vulnerability in the photo search endpoint where the query parameter is passed unsanitized into SQL WHERE and ORDER BY clauses. Unauthenticated attackers can exploit time-based blind SQL injection techniques to extract user credentials, email addresses, and administrator password hashes for account takeover. | ||||
| CVE-2026-96258 | 1 Onsite Internet Gmbh | 1 Auktion Ng Auktionssoftware | 2026-09-26 | 4.3 Medium |
| A vulnerability has been found in onSite internet GmbH Auktion NG Auktionssoftware up to 20260722. This affects an unknown part of the file /forgotpasswd.html of the component Public Password Reset Endpoint. The manipulation of the argument email leads to cross site scripting. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-95929 | 1 Iflytek | 1 Astron-agent | 2026-09-26 | 6.3 Medium |
| A weakness has been identified in iFlytek astron-agent up to 1.0.7. Affected is an unknown function of the file console/backend/commons/src/main/resources/mapper/ChatBotMarketMapper.xml of the component getBotList API endpoint. Executing a manipulation of the argument sortDirection can lead to sql injection. It is possible to launch the attack remotely. Upgrading to version reward-1575 is able to address this issue. This patch is called 6702be70ae802b1048f5fbec91e690e7b71a4165. You should upgrade the affected component. | ||||
| CVE-2026-95924 | 1 Sourcecodester | 1 Online Reviewer Management System | 2026-09-26 | 7.3 High |
| A vulnerability has been found in SourceCodester Online Reviewer Management System 1.0. Impacted is an unknown function of the file /reviewer_0/admins/assessments/databank/btn_functions.php?action=add. The manipulation of the argument difficulty_id leads to sql injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2026-95829 | 1 Tduckcloud | 1 Tduck-platform | 2026-09-26 | 6.3 Medium |
| A vulnerability was identified in TDuckCloud tduck-platform up to 5.3. This vulnerability affects the function PaginationInnerInterceptor.concatOrderBy of the file tduck-api/src/main/java/com/tduck/cloud/api/config/MybatisPlusConfig.java of the component Pagination Inner Interceptor. The manipulation of the argument orders[0].column leads to sql injection. The attack can be initiated remotely. The exploit is publicly available and might be used. The identifier of the patch is ea7f0fae7cb0fd998a3284c11addce689350cd69. It is suggested to install a patch to address this issue. | ||||
| CVE-2026-95813 | 1 E621ng | 1 E621ng | 2026-09-26 | 6.1 Medium |
| e621ng versions before 26.09.16 pass untrusted request parameters directly to Rails url_for in PaginatorComponent and controller navigation links, allowing attackers to redirect pagination and navigation controls to attacker-controlled origins. Attackers can supply host, protocol, and port query parameters that are interpreted as URL generation options, causing pagination links to point to malicious domains while the initial page loads from the legitimate site. | ||||
| CVE-2026-83805 | 1 Nautobot | 1 Nautobot | 2026-09-26 | 6.4 Medium |
| Nautobot is a Network Source of Truth and Network Automation Platform. From 3.0.0 until 3.1.8, the generic ApprovalWorkflowStageResponse create endpoint does not enforce approver-group membership, change permission on the object under review, or the one-response-per-user restriction applied by the intended approve and deny actions. A user with only extras.add_approvalworkflowstageresponse can submit approved responses directly, while writable user and state fields permit responses to be attributed to arbitrary users. These forged responses can satisfy min_approvers, approve the workflow, and activate its gated ScheduledJob without a legitimate approver. This issue is fixed in version 3.1.8. | ||||
| CVE-2026-62985 | 1 Azu | 1 Request-filtering-agent | 2026-09-26 | 7.5 High |
| request-filtering-agent is an http(s).Agent implementation that blocks requests to Private/Reserved IP addresses. Prior to 3.2.1, RequestFilteringHttpAgent and RequestFilteringHttpsAgent synchronously threw from createConnection when rejecting a literal private-IP host such as 169.254.169.254 or 127.0.0.1. Because Node.js http.request and http.get expect connection failures to be delivered asynchronously, the throw bypassed req.on('error') and became an uncaught exception that could terminate the application process. Hostnames resolved through the asynchronous lookup path were not affected by this error-delivery asymmetry. This issue is fixed in version 3.2.1. | ||||
| CVE-2026-62364 | 1 Weblateorg | 1 Wlc | 2026-09-26 | 2.3 Low |
| wlc is a Weblate command-line client using Weblate's REST API. Prior to 2.0.1, automatically discovered configuration from .weblate, .weblate.ini, or weblate.ini can select the API URL while an unscoped API token is supplied through WLC_KEY or --key without a matching WLC_URL or --url. When wlc runs in an untrusted repository, pull request checkout, or directory with untrusted ancestor configuration, it can send the token to an attacker-controlled project-configured URL. URL-scoped keys in [keys] are not affected. This issue is fixed in version 2.0.1. | ||||
| CVE-2026-57576 | 1 Plone | 2 Plone.app.contenttypes, Plone.app.dexterity | 2026-09-26 | 6.5 Medium |
| plone.app.dexterity is a content-type system for the Plone content management system, and plone.app.contenttypes provides Plone’s Dexterity-based content types. Plone.app.dexterity versions through 3.2.2, 4.0.0 through 4.1.2, and 5.0.0, and plone.app.contenttypes versions through 3.0.11, 4.0.0 through 4.0.9, and 5.0.0 are vulnerable to denial of service because an authenticated user can create content with excessively long titles, descriptions, or uploaded-file names, causing Plone to become unresponsive and potentially making the resulting content difficult to edit or delete. The vulnerability is patched in plone.app.dexterity versions 3.2.3, 4.1.3, and 5.0.1, and in plone.app.contenttypes versions 3.0.12, 4.0.10, and 5.0.1. | ||||
| CVE-2026-73064 | 1 Trustedfirmware | 1 Mbed Tls | 2026-09-26 | 2.9 Low |
| In Mbed TLS 3.2.0 though 3.6.6 and 4.0.0 through 4.1.0, an attacker who can cause an entropy source to fail can remove or inject bytes into the start of the TLS stream. This only affects TLS 1.3 servers. | ||||