| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In gokey versions <0.2.0,
a flaw in the seed decryption logic resulted in passwords incorrectly
being derived solely from the initial vector and the AES-GCM
authentication tag of the key seed.
This issue has been fixed in gokey version 0.2.0. This is a breaking change. The fix has invalidated any passwords/secrets that were derived from the seed file (using the -s option). Even if the input seed file stays the same, version 0.2.0 gokey will generate different secrets.
Impact
This vulnerability impacts generated keys/secrets using a seed file as an entropy input (using the -s option). Keys/secrets generated just from the master password (without the -s
option) are not impacted. The confidentiality of the seed itself is
also not impacted (it is not required to regenerate the seed itself).
Specific impact includes:
* keys/secrets generated from a seed file may have lower entropy: it
was expected that the whole seed would be used to generate keys (240
bytes of entropy input), where in vulnerable versions only 28 bytes was
used
* a malicious entity could have recovered all passwords, generated
from a particular seed, having only the seed file in possession without
the knowledge of the seed master password
Patches
The code logic bug has been fixed in gokey version 0.2.0
and above. Due to the deterministic nature of gokey, fixed versions
will produce different passwords/secrets using seed files, as all seed
entropy will be used now.
System secret rotation guidance
It is advised for users to regenerate passwords/secrets using the patched version of gokey (0.2.0
and above), and provision/rotate these secrets into respective systems
in place of the old secret. A specific rotation procedure is
system-dependent, but most common patterns are described below.
Systems that do not require the old password/secret for rotation
Such systems usually have a "Forgot password" facility or a
similar facility allowing users to rotate their password/secrets by
sending a unique "magic" link to the user's email or phone. In such
cases users are advised to use this facility and input the newly
generated password secret, when prompted by the system.
Systems that require the old password/secret for rotation
Such systems usually have a modal password rotation window
usually in the user settings section requiring the user to input the
old and the new password sometimes with a confirmation. To
generate/recover the old password in such cases users are advised to:
* temporarily download gokey version 0.1.3 https://github.com/cloudflare/gokey/releases/tag/v0.1.3 for their respective operating system to recover the old password
* use gokey version 0.2.0 or above to generate the new password
* populate the system provided password rotation form
Systems that allow multiple credentials for the same account to be provisioned
Such systems usually require a secret or a cryptographic
key as a credential for access, but allow several credentials at the
same time. One example is SSH: a particular user may have several
authorized public keys configured on the SSH server for access. For such
systems users are advised to:
* generate a new secret/key/credential using gokey version 0.2.0 or above
* provision the new secret/key/credential in addition to the existing credential on the system
* verify that the access or required system operation is still possible with the new secret/key/credential
* revoke authorization for the existing/old credential from the system
Credit
This vulnerability was found by Théo Cusnir ( @mister_mime https://hackerone.com/mister_mime ) and responsibly disclosed through Cloudflare's bug bounty program. |
| An exploitable remote code execution vulnerability exists in the upload.cgi functionality of Sierra Wireless AirLink ES450 FW 4.9.3. A specially crafted HTTP request can upload a file, resulting in executable code being uploaded, and routable, to the webserver. An attacker can make an authenticated HTTP request to trigger this vulnerability. |
| N-central versions < 2025.4 are vulnerable to multiple XML External Entities injection leading to information disclosure |
| IBM webMethods Integration 10.11 through 10.11_Core_Fix22, 10.15 through 10.15_Core_Fix22, and 11.1 through 11.1_Core_Fix6 IBM webMethods Integration allow an authenticated user to execute arbitrary code on the system, caused by the deserialization of untrusted object graphs data. |
| cups-filters contains backends, filters, and other software required to get the cups printing service working on operating systems other than macos. In versions 2.0.1 and prior, a heap-buffer-overflow vulnerability in the rastertopclx filter causes the program to crash with a segmentation fault when processing maliciously crafted input data. This issue can be exploited to trigger memory corruption, potentially leading to arbitrary code execution. This issue has been patched via commit 956283c. |
| A flaw was found in util-linux. This vulnerability allows a heap buffer overread when processing 256-byte usernames, specifically within the `setpwnam()` function, affecting SUID (Set User ID) login-utils utilities writing to the password database. |
| A vulnerability in OpenSearch allows attackers to cause Denial of Service (DoS) by submitting complex query_string inputs.
This issue affects all OpenSearch versions between 3.0.0 and < 3.3.0 and OpenSearch < 2.19.4. |
| WBCE CMS is a content management system. Prior to version 1.6.4, a low-privileged user in WBCE CMS can escalate their privileges to the Administrators group by manipulating the groups[] parameter in the /admin/users/save.php request. The UI restricts users to assigning only their existing group, but server-side validation is missing, allowing attackers to overwrite their group membership and obtain full administrative access. This results in a complete compromise of the CMS. This issue has been patched in version 1.6.4. |
| A post-authentication command injection vulnerability in the "priv" parameter of Zyxel DX3300-T0 firmware version 5.50(ABVY.6.3)C0 and earlier could allow an authenticated attacker to execute operating system (OS) commands on an affected device. |
| The Chassis Management Board in Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7, allows a physically proximate attacker to obtain debug access and escalate privileges by bypassing the tamper label and opening the chassis without leaving evidence, and accessing the JTAG connector. This is called F02. |
| The Chassis Management Board in Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7, allows a physically proximate attacker to persistently modify firmware and influence the (insecurely configured) appliance boot process. To exploit this, the attacker must modify the firmware via JTAG or perform an upgrade to the chassis management board firmware. This is called F03. |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7, allow a user with OS root access to alter firmware on the Chassis Management Board (without Authentication). This is called F04. |
| Cross-Site Request Forgery (CSRF) vulnerability in VibeThemes WPLMS theme <= 4.900 versions. |
| DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2025-67906. Reason: This candidate is a reservation duplicate of CVE-2025-67906. Notes: All CVE users should reference CVE-2025-67906 instead of this candidate. All references and descriptions in this candidate have been removed to prevent accidental usage. |
| The WPNakama plugin for WordPress is vulnerable to time-based SQL Injection via the 'order_by' parameter in all versions up to, and including, 0.6.3 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The Ultra Addons for Contact Form 7 plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on the 'uacf7_get_generated_pdf' function in all versions up to, and including, 3.5.33. This makes it possible for authenticated attackers, with Subscriber-level access and above, to generate and get form submission PDF, when the "PDF Generator" and the "Database" addons are enabled (disabled by default). |
| The Construction Light WordPress theme before 1.6.8 does not have authorisation and CSRF when activating via an AJAX action, allowing any authenticated users, such as subscriber to activate arbitrary . |
| The Hippoo Mobile App for WooCommerce plugin for WordPress is vulnerable to arbitrary file write via a missing authorization check in all versions up to, and including, 1.7.1. This is due to the REST API endpoint `/wp-json/hippoo/v1/wc/token/save_callback/{token_id}` being registered with `permission_callback => '__return_true'`, which allows unauthenticated access. This makes it possible for unauthenticated attackers to write arbitrary JSON content to the server's publicly accessible upload directory via the vulnerable endpoint. |
| Parse Server is an open source backend that can be deployed to any infrastructure that runs Node.js. In versions prior to 8.6.0-alpha.2, a GitHub CI workflow is triggered in a way that grants the GitHub Actions workflow elevated permissions, giving it access to GitHub secrets and write permissions which are defined in the workflow. Code from a fork or lifecycle scripts is potentially included. Only the repository's CI/CD infrastructure is affected, including any public GitHub forks with GitHub Actions enabled. This issue is fixed version 8.6.0-alpha.2 and commits 6b9f896 and e3d27fe. |
| The Events Manager – Calendar, Bookings, Tickets, and more! plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 7.2.2.2. This is due to missing or incorrect nonce validation on the 'location_delete' action. This makes it possible for unauthenticated attackers to delete locations via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
