| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A heap-based buffer overflow in the Kerberos hash parser in hashcat v7.1.2 allows an attacker to cause a denial of service or possibly execute arbitrary code via a crafted Kerberos hash file. The issue affects module_hash_decode in multiple Kerberos-related modules because account_info_len is calculated from untrusted delimiter positions without upper-bound validation before memcpy copies the data into a fixed-size account_info buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_ether: Fix race between gether_disconnect and eth_stop
A race condition between gether_disconnect() and eth_stop() leads to a
NULL pointer dereference. Specifically, if eth_stop() is triggered
concurrently while gether_disconnect() is tearing down the endpoints,
eth_stop() attempts to access the cleared endpoint descriptor, causing
the following NPE:
Unable to handle kernel NULL pointer dereference
Call trace:
__dwc3_gadget_ep_enable+0x60/0x788
dwc3_gadget_ep_enable+0x70/0xe4
usb_ep_enable+0x60/0x15c
eth_stop+0xb8/0x108
Because eth_stop() crashes while holding the dev->lock, the thread
running gether_disconnect() fails to acquire the same lock and spins
forever, resulting in a hardlockup:
Core - Debugging Information for Hardlockup core(7)
Call trace:
queued_spin_lock_slowpath+0x94/0x488
_raw_spin_lock+0x64/0x6c
gether_disconnect+0x19c/0x1e8
ncm_set_alt+0x68/0x1a0
composite_setup+0x6a0/0xc50
The root cause is that the clearing of dev->port_usb in
gether_disconnect() is delayed until the end of the function.
Move the clearing of dev->port_usb to the very beginning of
gether_disconnect() while holding dev->lock. This cuts off the link
immediately, ensuring eth_stop() will see dev->port_usb as NULL and
safely bail out. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix is_bpf_migration_disabled() false negative on non-PREEMPT_RCU
Since commit 8e4f0b1ebcf2 ("bpf: use rcu_read_lock_dont_migrate() for
trampoline.c"), the BPF prolog (__bpf_prog_enter) calls migrate_disable()
only when CONFIG_PREEMPT_RCU is enabled, via rcu_read_lock_dont_migrate().
Without CONFIG_PREEMPT_RCU, the prolog never touches migration_disabled,
so migration_disabled == 1 always means the task is truly
migration-disabled regardless of whether it is the current task.
The old unconditional p == current check was a false negative in this
case, potentially allowing a migration-disabled task to be dispatched to
a remote CPU and triggering scx_error in task_can_run_on_remote_rq().
Only apply the p == current disambiguation when CONFIG_PREEMPT_RCU is
enabled, where the ambiguity with the BPF prolog still exists. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (tps53679) Fix array access with zero-length block read
i2c_smbus_read_block_data() can return 0, indicating a zero-length
read. When this happens, tps53679_identify_chip() accesses buf[ret - 1]
which is buf[-1], reading one byte before the buffer on the stack.
Fix by changing the check from "ret < 0" to "ret <= 0", treating a
zero-length read as an error (-EIO), which prevents the out-of-bounds
array access.
Also fix a typo in the adjacent comment: "if present" instead of
duplicate "if". |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: qixis-fpga: Fix error handling for devm_regmap_init_mmio()
devm_regmap_init_mmio() returns an ERR_PTR() on failure, not NULL.
The original code checked for NULL which would never trigger on error,
potentially leading to an invalid pointer dereference.
Use IS_ERR() and PTR_ERR() to properly handle the error case. |
| Traefik is an HTTP reverse proxy and load balancer. Prior to versions 2.11.43, 3.6.14, and 3.7.0-rc.2, there is a high severity authentication bypass vulnerability in Traefik's ForwardAuth and snippet-based authentication middleware. Traefik's forwarded-header sanitization logic targets only canonical header names (e.g., X-Forwarded-Proto) and does not strip or normalize alias variants that use underscores instead of dashes (e.g., X_Forwarded_Proto). These unsanitized alias headers are forwarded intact to the authentication backend. When the backend normalizes underscore and dash header forms equivalently, an attacker can inject spoofed trust context — such as a trusted scheme or host — through the alias headers and bypass authentication on protected routes without valid credentials. This issue has been patched in versions 2.11.43, 3.6.14, and 3.7.0-rc.2. |
| Traefik is an HTTP reverse proxy and load balancer. Prior to versions 2.11.43, 3.6.14, and 3.7.0-rc.2, there is a high severity authentication bypass vulnerability in Traefik's StripPrefixRegex middleware when used in combination with ForwardAuth, BasicAuth, or DigestAuth. The middleware matches the regex against the decoded URL path but uses the resulting byte length to slice the percent-encoded raw path. When a dot (or multiple dots) appears in the prefix portion of the URL, the raw path after stripping becomes a dot-segment (e.g. /./admin/secret). ForwardAuth receives this dot-segment path in X-Forwarded-Uri, which does not match the protected path patterns and therefore allows the request through. The backend then normalizes the dot-segment to the real path per RFC 3986 and serves the protected content An unauthenticated attacker can exploit this against any backend that performs dot-segment normalization. This issue has been patched in versions 2.11.43, 3.6.14, and 3.7.0-rc.2. |
| Incomplete validation of AI rich response messages for Instagram Reels in WhatsApp for iOS v2.25.8.0 to v2.26.15.72 and WhatsApp for Android v2.25.8.0 to v2.26.7.10 could have allowed a user to trigger processing of media content from an arbitrary URL on another user’s device, including triggering OS-controlled custom URL scheme handlers. We have not seen evidence of exploitation in the wild. |
| An integer overflow in the tt_var_load_item_variation_store function of the Freetype library in versions 2.13.2 and 2.13.3 may allow for an out of bounds read operation when parsing HVAR/VVAR/MVAR tables in OpenType variable fonts. This issue is fixed in version 2.14.2. |
| Dell iDRAC10, versions 1.20.70.50 and 1.30.05.10, contains an Insufficiently Protected Credentials vulnerability. A race condition vulnerability exists that could allow an authenticated low‑privileged attacker to gain elevated access. |
| The authentication endpoint accepts user-supplied input without enforcing expected validation constraints, leading to a lack of proper output encoding. This allows for the injection of malicious JavaScript payloads, enabling reflected cross-site scripting.
An attacker can leverage this vulnerability to redirect the user's browser to a malicious website, modify the user interface of the web page, retrieve information from the browser, or cause other harmful actions. However, due to the protection of session-related cookies with the httpOnly flag, session hijacking is not possible. |
| Buffer overflow vulnerability in Open Vehicle Monitoring System 3 (OVMS3) 3.3.005. In canformat_canswitch.cpp the parser does not properly validate a CANswitch DLC value, allowing remote attackers to cause a denial of service or possibly execute arbitrary code via crafted CANswitch frames. |
| Traefik is an HTTP reverse proxy and load balancer. Prior to versions 2.11.43, 3.6.14, and 3.7.0-rc.2, there is a potential vulnerability in Traefik's Kubernetes CRD provider cross-namespace isolation enforcement. When providers.kubernetesCRD.allowCrossNamespace=false, Traefik correctly rejects direct cross-namespace middleware references from IngressRoute objects, but fails to apply the same restriction to middleware references nested inside a Chain middleware's spec.chain.middlewares[]. An actor with permission to create or update Traefik CRDs in their own namespace can exploit this to cause Traefik to resolve and apply middleware objects from another namespace, bypassing the documented isolation boundary. This issue has been patched in versions 2.11.43, 3.6.14, and 3.7.0-rc.2. |
| Insufficient verification of data authenticity in PackageManagerService prior to SMR Mar-2026 Release 1 allows local attackers to modify the installation restriction of specific application. |
| Buffer overflow vulnerability in cannelloni v2.0.0 in CAN frame parsing in parser.cpp in function parseCANFrame, and decoder.cpp in function decodeFrame allowing remote attackers to cause a denial of service (crash) or possibly execute arbitrary code via crafted CAN FD frames. |
| Traefik is an HTTP reverse proxy and load balancer. Prior to versions 2.11.43, 3.6.14, and 3.7.0-rc.2, there is a timing side-channel vulnerability in Traefik's BasicAuth middleware that allows an attacker to enumerate valid usernames through response-time differences. The variable intended to hold a constant-time fallback secret always resolves to an empty string, causing the constant-time comparison to short-circuit in microseconds rather than performing a full bcrypt evaluation. This restores the original timing oracle and makes it possible to distinguish existing users from non-existing ones by measuring authentication response times. This issue has been patched in versions 2.11.43, 3.6.14, and 3.7.0-rc.2. |
| OS Command Injection Remote Code Execution Vulnerability in UI in Progress ADC Products allows an authenticated attacker with “All” permissions to execute arbitrary commands on the LoadMaster appliance by exploiting unsanitized input in a custom WAF rule file during the file upload process. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Change AMDGPU_VA_RESERVED_TRAP_SIZE to 64KB
Currently, AMDGPU_VA_RESERVED_TRAP_SIZE is hardcoded to 8KB, while
KFD_CWSR_TBA_TMA_SIZE is defined as 2 * PAGE_SIZE. On systems with
4K pages, both values match (8KB), so allocation and reserved space
are consistent.
However, on 64K page-size systems, KFD_CWSR_TBA_TMA_SIZE becomes 128KB,
while the reserved trap area remains 8KB. This mismatch causes the
kernel to crash when running rocminfo or rccl unit tests.
Kernel attempted to read user page (2) - exploit attempt? (uid: 1001)
BUG: Kernel NULL pointer dereference on read at 0x00000002
Faulting instruction address: 0xc0000000002c8a64
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
CPU: 34 UID: 1001 PID: 9379 Comm: rocminfo Tainted: G E
6.19.0-rc4-amdgpu-00320-gf23176405700 #56 VOLUNTARY
Tainted: [E]=UNSIGNED_MODULE
Hardware name: IBM,9105-42A POWER10 (architected) 0x800200 0xf000006
of:IBM,FW1060.30 (ML1060_896) hv:phyp pSeries
NIP: c0000000002c8a64 LR: c00000000125dbc8 CTR: c00000000125e730
REGS: c0000001e0957580 TRAP: 0300 Tainted: G E
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24008268
XER: 00000036
CFAR: c00000000125dbc4 DAR: 0000000000000002 DSISR: 40000000
IRQMASK: 1
GPR00: c00000000125d908 c0000001e0957820 c0000000016e8100
c00000013d814540
GPR04: 0000000000000002 c00000013d814550 0000000000000045
0000000000000000
GPR08: c00000013444d000 c00000013d814538 c00000013d814538
0000000084002268
GPR12: c00000000125e730 c000007e2ffd5f00 ffffffffffffffff
0000000000020000
GPR16: 0000000000000000 0000000000000002 c00000015f653000
0000000000000000
GPR20: c000000138662400 c00000013d814540 0000000000000000
c00000013d814500
GPR24: 0000000000000000 0000000000000002 c0000001e0957888
c0000001e0957878
GPR28: c00000013d814548 0000000000000000 c00000013d814540
c0000001e0957888
NIP [c0000000002c8a64] __mutex_add_waiter+0x24/0xc0
LR [c00000000125dbc8] __mutex_lock.constprop.0+0x318/0xd00
Call Trace:
0xc0000001e0957890 (unreliable)
__mutex_lock.constprop.0+0x58/0xd00
amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x6fc/0xb60 [amdgpu]
kfd_process_alloc_gpuvm+0x54/0x1f0 [amdgpu]
kfd_process_device_init_cwsr_dgpu+0xa4/0x1a0 [amdgpu]
kfd_process_device_init_vm+0xd8/0x2e0 [amdgpu]
kfd_ioctl_acquire_vm+0xd0/0x130 [amdgpu]
kfd_ioctl+0x514/0x670 [amdgpu]
sys_ioctl+0x134/0x180
system_call_exception+0x114/0x300
system_call_vectored_common+0x15c/0x2ec
This patch changes AMDGPU_VA_RESERVED_TRAP_SIZE to 64 KB and
KFD_CWSR_TBA_TMA_SIZE to the AMD GPU page size. This means we reserve
64 KB for the trap in the address space, but only allocate 8 KB within
it. With this approach, the allocation size never exceeds the reserved
area.
(cherry picked from commit 31b8de5e55666f26ea7ece5f412b83eab3f56dbb) |
| pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.3, the `pyasn1` library is vulnerable to a Denial of Service (DoS) attack caused by uncontrolled recursion when decoding ASN.1 data with deeply nested structures. An attacker can supply a crafted payload containing thousands of nested `SEQUENCE` (`0x30`) or `SET` (`0x31`) tags with "Indefinite Length" (`0x80`) markers. This forces the decoder to recursively call itself until the Python interpreter crashes with a `RecursionError` or consumes all available memory (OOM), crashing the host application. This is a distinct vulnerability from CVE-2026-23490 (which addressed integer overflows in OID decoding). The fix for CVE-2026-23490 (`MAX_OID_ARC_CONTINUATION_OCTETS`) does not mitigate this recursion issue. Version 0.6.3 fixes this specific issue. |
| An issue was discovered in Prosody before 0.12.6 and 1.0.0 through 13.0.0 before 13.0.5, when mod_proxy65 is enabled. Because mod_proxy65 mishandles access control in a paused scenario, relaying of unauthenticated traffic can occur. |
