| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: netpoll: initialize work queue before error checks
Prevent a kernel warning when netconsole setup fails on devices with
IFF_DISABLE_NETPOLL flag. The warning (at kernel/workqueue.c:4242 in
__flush_work) occurs because the cleanup path tries to cancel an
uninitialized work queue.
When __netpoll_setup() encounters a device with IFF_DISABLE_NETPOLL,
it fails early and calls skb_pool_flush() for cleanup. This function
calls cancel_work_sync(&np->refill_wq), but refill_wq hasn't been
initialized yet, triggering the warning.
Move INIT_WORK() to the beginning of __netpoll_setup(), ensuring the
work queue is properly initialized before any potential failure points.
This allows the cleanup path to safely cancel the work queue regardless
of where the setup fails. |
| In the Linux kernel, the following vulnerability has been resolved:
hfs: fix potential use after free in hfs_correct_next_unused_CNID()
This code calls hfs_bnode_put(node) which drops the refcount and then
dreferences "node" on the next line. It's only safe to use "node"
when we're holding a reference so flip these two lines around. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix potential out-of-bounds read in iommu_mmio_show
In iommu_mmio_write(), it validates the user-provided offset with the
check: `iommu->dbg_mmio_offset > iommu->mmio_phys_end - 4`.
This assumes a 4-byte access. However, the corresponding
show handler, iommu_mmio_show(), uses readq() to perform an 8-byte
(64-bit) read.
If a user provides an offset equal to `mmio_phys_end - 4`, the check
passes, and will lead to a 4-byte out-of-bounds read.
Fix this by adjusting the boundary check to use sizeof(u64), which
corresponds to the size of the readq() operation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtl818x: Fix potential memory leaks in rtl8180_init_rx_ring()
In rtl8180_init_rx_ring(), memory is allocated for skb packets and DMA
allocations in a loop. When an allocation fails, the previously
successful allocations are not freed on exit.
Fix that by jumping to err_free_rings label on error, which calls
rtl8180_free_rx_ring() to free the allocations. Remove the free of
rx_ring in rtl8180_init_rx_ring() error path, and set the freed
priv->rx_buf entry to null, to avoid double free. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: most: remove broken i2c driver
The MOST I2C driver has been completely broken for five years without
anyone noticing so remove the driver from staging.
Specifically, commit 723de0f9171e ("staging: most: remove device from
interface structure") started requiring drivers to set the interface
device pointer before registration, but the I2C driver was never updated
which results in a NULL pointer dereference if anyone ever tries to
probe it. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: amlogic-a4: fix double free caused by devm
The clock obtained via devm_clk_get_enabled() is automatically managed
by devres and will be disabled and freed on driver detach. Manually
calling clk_disable_unprepare() in error path and remove function
causes double free.
Remove the redundant clk_disable_unprepare() calls from the probe
error path and aml_rtc_remove(), allowing the devm framework to
automatically manage the clock lifecycle. |
| Missing Authorization vulnerability in WPweb Follow My Blog Post allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Follow My Blog Post: from n/a through 2.4.0. |
| Improper Restriction of XML External Entity Reference vulnerability in Apache SIS.
It is possible to write XML files in such a way that, when parsed by Apache SIS, an XML file reveals to the attacker the content of a local file on the server running Apache SIS. This vulnerability impacts the following SIS services:
* Reading of GeoTIFF files having the GEO_METADATA tag defined by the Defense Geospatial Information Working Group (DGIWG).
* Parsing of ISO 19115 metadata in XML format.
* Parsing of Coordinate Reference Systems defined in the GML format.
* Parsing of files in GPS Exchange Format (GPX).
This issue affects Apache SIS from versions 0.4 through 1.5 inclusive. Users are recommended to upgrade to version 1.6, which will fix the issue. In the meantime, the security vulnerability can be avoided by launching Java with the javax.xml.accessExternalDTD system property sets to a comma-separated list of authorized protocols. For example:
java -Djavax.xml.accessExternalDTD="" ... |
| Insertion of Sensitive Information Into Sent Data vulnerability in WP Swings Wallet System for WooCommerce allows Retrieve Embedded Sensitive Data.This issue affects Wallet System for WooCommerce: from n/a through 2.7.2. |
| An issue in realme Internet browser v.45.13.4.1 allows a remote attacker to execute arbitrary code via a crafted webpage in the built-in HeyTap/ColorOS browser |
| Cross Site Request Forgery vulnerability in Employee Leave Management System v.2.1 allows a remote attacker to escalate privileges via the manage-employee.php component |
| An issue in ComfyUI-Manager prior to version 3.38 allowed remote attackers to potentially manipulate its configuration and critical data. This was due to the application storing its files in an insufficiently protected location that was accessible via the web interface |
| An Improper Access Control could allow a malicious actor in Wi-Fi range to the EV Station Lite (v1.5.2 and earlier) to use WiFi AutoLink feature on a device that was only adopted via Ethernet. |
| A malicious actor with access to the adjacent network could obtain unauthorized access to a UniFi Protect Camera by exploiting a discovery protocol vulnerability in the Unifi Protect Application (Version 6.1.79 and earlier).
Affected Products:
UniFi Protect Application (Version 6.1.79 and earlier).
Mitigation:
Update your UniFi Protect Application to Version 6.2.72 or later. |
| Any client who can access to Apache Kyuubi Server via Kyuubi frontend protocols can bypass server-side config kyuubi.session.local.dir.allow.list and use local files which are not listed in the config.
This issue affects Apache Kyuubi: from 1.6.0 through 1.10.2.
Users are recommended to upgrade to version 1.10.3 or upper, which fixes the issue. |
| Zimbra Collaboration (ZCS) 10 before 10.0.18 and 10.1 before 10.1.13 allows Classic UI stored XSS via Cascading Style Sheets (CSS) @import directives in an HTML e-mail message. |
| PLANKA 2.0.0 lacks X-Frame-Options and CSP frame-ancestors headers, allowing the application to be embedded within malicious iframes. While this does not lead to unintended modification of projects or tasks, it exposes users to Phishing attacks. Attackers can frame the legitimate Planka application on a malicious site to establish false trust (UI Redressing), potentially tricking users into entering sensitive information or credentials into overlaid fake forms. NOTE: this is disputed by the Supplier because "PLANKA uses SameSite=Strict cookies, preventing authentication in cross-origin contexts. No session can be established. No credential interception or unauthorized actions are possible. Browser Same-Origin Policy prevents the parent page from accessing iframe content. Clickjacking is not applicable on the login page. Any credential capture would require attacker-controlled input and user interaction equivalent to phishing. The security outcome depends entirely on the user's trust in the parent page. An attacker can achieve the same effect with a fully fake login page. Embedding the legitimate page adds no risk, as browsers do not show URL, certificate, or padlock indicators in cross-origin iframes." |
| AnythingLLM is an application that turns pieces of content into context that any LLM can use as references during chatting. Prior to commit e287fab56089cf8fcea9ba579a3ecdeca0daa313, the password recovery endpoint returns different error messages depending on whether a username exists, so enabling username enumeration. Commit e287fab56089cf8fcea9ba579a3ecdeca0daa313 fixes this issue. |
| MessagePack for Java is a serializer implementation for Java. A denial-of-service vulnerability exists in versions prior to 0.9.11 when deserializing .msgpack files containing EXT32 objects with attacker-controlled payload lengths. While MessagePack-Java parses extension headers lazily, it later trusts the declared EXT payload length when materializing the extension data. When ExtensionValue.getData() is invoked, the library attempts to allocate a byte array of the declared length without enforcing any upper bound. A malicious .msgpack file of only a few bytes can therefore trigger unbounded heap allocation, resulting in JVM heap exhaustion, process termination, or service unavailability. This vulnerability is triggered during model loading / deserialization, making it a model format vulnerability suitable for remote exploitation. The vulnerability enables a remote denial-of-service attack against applications that deserialize untrusted .msgpack model files using MessagePack for Java. A specially crafted but syntactically valid .msgpack file containing an EXT32 object with an attacker-controlled, excessively large payload length can trigger unbounded memory allocation during deserialization. When the model file is loaded, the library trusts the declared length metadata and attempts to allocate a byte array of that size, leading to rapid heap exhaustion, excessive garbage collection, or immediate JVM termination with an OutOfMemoryError. The attack requires no malformed bytes, user interaction, or elevated privileges and can be exploited remotely in real-world environments such as model registries, inference services, CI/CD pipelines, and cloud-based model hosting platforms that accept or fetch .msgpack artifacts. Because the malicious file is extremely small yet valid, it can bypass basic validation and scanning mechanisms, resulting in complete service unavailability and potential cascading failures in production systems. Version 0.9.11 fixes the vulnerability. |
| Langflow is a tool for building and deploying AI-powered agents and workflows. Prior to version 1.7.0.dev45, multiple critical API endpoints in Langflow are missing authentication controls. The issue allows any unauthenticated user to access sensitive user conversation data, transaction histories, and perform destructive operations including message deletion. This affects endpoints handling personal data and system operations that should require proper authorization. Version 1.7.0.dev45 contains a patch. |
