| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: clear phydev->devlink when the link is deleted
There is a potential crash issue when disabling and re-enabling the
network port. When disabling the network port, phy_detach() calls
device_link_del() to remove the device link, but it does not clear
phydev->devlink, so phydev->devlink is not a NULL pointer. Then the
network port is re-enabled, but if phy_attach_direct() fails before
calling device_link_add(), the code jumps to the "error" label and
calls phy_detach(). Since phydev->devlink retains the old value from
the previous attach/detach cycle, device_link_del() uses the old value,
which accesses a NULL pointer and causes a crash. The simplified crash
log is as follows.
[ 24.702421] Call trace:
[ 24.704856] device_link_put_kref+0x20/0x120
[ 24.709124] device_link_del+0x30/0x48
[ 24.712864] phy_detach+0x24/0x168
[ 24.716261] phy_attach_direct+0x168/0x3a4
[ 24.720352] phylink_fwnode_phy_connect+0xc8/0x14c
[ 24.725140] phylink_of_phy_connect+0x1c/0x34
Therefore, phydev->devlink needs to be cleared when the device link is
deleted. |
| A flaw was found in Shim when an error happened while creating a new ESL variable. If Shim fails to create the new variable, it tries to print an error message to the user; however, the number of parameters used by the logging function doesn't match the format string used by it, leading to a crash under certain circumstances. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: max77705: Fix workqueue error handling in probe
The create_singlethread_workqueue() doesn't return error pointers, it
returns NULL. Also cleanup the workqueue on the error paths. |
| A NULL pointer dereference flaw was found in KubeVirt. This flaw allows an attacker who has access to a virtual machine guest on a node with DownwardMetrics enabled to cause a denial of service by issuing a high number of calls to vm-dump-metrics --virtio and then deleting the virtual machine. |
| A NULL pointer dereference flaw was found in dbFree in fs/jfs/jfs_dmap.c in the journaling file system (JFS) in the Linux Kernel. This issue may allow a local attacker to crash the system due to a missing sanity check. |
| A NULL pointer dereference vulnerability was found in netlink_dump. This issue can occur when the Netlink socket receives the message(sendmsg) for the XFRM_MSG_GETSA, XFRM_MSG_GETPOLICY type message, and the DUMP flag is set and can cause a denial of service or possibly another unspecified impact. Due to the nature of the flaw, privilege escalation cannot be fully ruled out, although it is unlikely. |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: fix potential null pointer deref in fpga_mgr_test_img_load_sgt()
fpga_mgr_test_img_load_sgt() allocates memory for sgt using
kunit_kzalloc() however it does not check if the allocation failed.
It then passes sgt to sg_alloc_table(), which passes it to
__sg_alloc_table(). This function calls memset() on sgt in an attempt to
zero it out. If the allocation fails then sgt will be NULL and the
memset will trigger a NULL pointer dereference.
Fix this by checking the allocation with KUNIT_ASSERT_NOT_ERR_OR_NULL(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: prevent a NULL deref in rtnl_create_link()
At the time rtnl_create_link() is running, dev->netdev_ops is NULL,
we must not use netdev_lock_ops() or risk a NULL deref if
CONFIG_NET_SHAPER is defined.
Use netif_set_group() instead of dev_set_group().
RIP: 0010:netdev_need_ops_lock include/net/netdev_lock.h:33 [inline]
RIP: 0010:netdev_lock_ops include/net/netdev_lock.h:41 [inline]
RIP: 0010:dev_set_group+0xc0/0x230 net/core/dev_api.c:82
Call Trace:
<TASK>
rtnl_create_link+0x748/0xd10 net/core/rtnetlink.c:3674
rtnl_newlink_create+0x25c/0xb00 net/core/rtnetlink.c:3813
__rtnl_newlink net/core/rtnetlink.c:3940 [inline]
rtnl_newlink+0x16d6/0x1c70 net/core/rtnetlink.c:4055
rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6944
netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2534
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x75b/0x8d0 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:712 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: exit after state insertion failure at btrfs_convert_extent_bit()
If insert_state() state failed it returns an error pointer and we call
extent_io_tree_panic() which will trigger a BUG() call. However if
CONFIG_BUG is disabled, which is an uncommon and exotic scenario, then
we fallthrough and call cache_state() which will dereference the error
pointer, resulting in an invalid memory access.
So jump to the 'out' label after calling extent_io_tree_panic(), it also
makes the code more clear besides dealing with the exotic scenario where
CONFIG_BUG is disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Add NULL check in mt7996_thermal_init
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in mt7996_thermal_init() is not checked.
Add NULL check in mt7996_thermal_init(), to handle kernel NULL
pointer dereference error. |
| In the Linux kernel, the following vulnerability has been resolved:
lib/group_cpus: fix NULL pointer dereference from group_cpus_evenly()
While testing null_blk with configfs, echo 0 > poll_queues will trigger
following panic:
BUG: kernel NULL pointer dereference, address: 0000000000000010
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 27 UID: 0 PID: 920 Comm: bash Not tainted 6.15.0-02023-gadbdb95c8696-dirty #1238 PREEMPT(undef)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014
RIP: 0010:__bitmap_or+0x48/0x70
Call Trace:
<TASK>
__group_cpus_evenly+0x822/0x8c0
group_cpus_evenly+0x2d9/0x490
blk_mq_map_queues+0x1e/0x110
null_map_queues+0xc9/0x170 [null_blk]
blk_mq_update_queue_map+0xdb/0x160
blk_mq_update_nr_hw_queues+0x22b/0x560
nullb_update_nr_hw_queues+0x71/0xf0 [null_blk]
nullb_device_poll_queues_store+0xa4/0x130 [null_blk]
configfs_write_iter+0x109/0x1d0
vfs_write+0x26e/0x6f0
ksys_write+0x79/0x180
__x64_sys_write+0x1d/0x30
x64_sys_call+0x45c4/0x45f0
do_syscall_64+0xa5/0x240
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Root cause is that numgrps is set to 0, and ZERO_SIZE_PTR is returned from
kcalloc(), and later ZERO_SIZE_PTR will be deferenced.
Fix the problem by checking numgrps first in group_cpus_evenly(), and
return NULL directly if numgrps is zero.
[yukuai3@huawei.com: also fix the non-SMP version] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Avoid NULL pointer dereference in `v3d_job_update_stats()`
The following kernel Oops was recently reported by Mesa CI:
[ 800.139824] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000588
[ 800.148619] Mem abort info:
[ 800.151402] ESR = 0x0000000096000005
[ 800.155141] EC = 0x25: DABT (current EL), IL = 32 bits
[ 800.160444] SET = 0, FnV = 0
[ 800.163488] EA = 0, S1PTW = 0
[ 800.166619] FSC = 0x05: level 1 translation fault
[ 800.171487] Data abort info:
[ 800.174357] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 800.179832] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 800.184873] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 800.190176] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001014c2000
[ 800.196607] [0000000000000588] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 800.205305] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[ 800.211564] Modules linked in: vc4 snd_soc_hdmi_codec drm_display_helper v3d cec gpu_sched drm_dma_helper drm_shmem_helper drm_kms_helper drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm i2c_brcmstb snd_timer snd backlight
[ 800.234448] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.25+rpt-rpi-v8 #1 Debian 1:6.12.25-1+rpt1
[ 800.244182] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT)
[ 800.250005] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 800.256959] pc : v3d_job_update_stats+0x60/0x130 [v3d]
[ 800.262112] lr : v3d_job_update_stats+0x48/0x130 [v3d]
[ 800.267251] sp : ffffffc080003e60
[ 800.270555] x29: ffffffc080003e60 x28: ffffffd842784980 x27: 0224012000000000
[ 800.277687] x26: ffffffd84277f630 x25: ffffff81012fd800 x24: 0000000000000020
[ 800.284818] x23: ffffff8040238b08 x22: 0000000000000570 x21: 0000000000000158
[ 800.291948] x20: 0000000000000000 x19: ffffff8040238000 x18: 0000000000000000
[ 800.299078] x17: ffffffa8c1bd2000 x16: ffffffc080000000 x15: 0000000000000000
[ 800.306208] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 800.313338] x11: 0000000000000040 x10: 0000000000001a40 x9 : ffffffd83b39757c
[ 800.320468] x8 : ffffffd842786420 x7 : 7fffffffffffffff x6 : 0000000000ef32b0
[ 800.327598] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : ffffffd842784980
[ 800.334728] x2 : 0000000000000004 x1 : 0000000000010002 x0 : 000000ba4c0ca382
[ 800.341859] Call trace:
[ 800.344294] v3d_job_update_stats+0x60/0x130 [v3d]
[ 800.349086] v3d_irq+0x124/0x2e0 [v3d]
[ 800.352835] __handle_irq_event_percpu+0x58/0x218
[ 800.357539] handle_irq_event+0x54/0xb8
[ 800.361369] handle_fasteoi_irq+0xac/0x240
[ 800.365458] handle_irq_desc+0x48/0x68
[ 800.369200] generic_handle_domain_irq+0x24/0x38
[ 800.373810] gic_handle_irq+0x48/0xd8
[ 800.377464] call_on_irq_stack+0x24/0x58
[ 800.381379] do_interrupt_handler+0x88/0x98
[ 800.385554] el1_interrupt+0x34/0x68
[ 800.389123] el1h_64_irq_handler+0x18/0x28
[ 800.393211] el1h_64_irq+0x64/0x68
[ 800.396603] default_idle_call+0x3c/0x168
[ 800.400606] do_idle+0x1fc/0x230
[ 800.403827] cpu_startup_entry+0x40/0x50
[ 800.407742] rest_init+0xe4/0xf0
[ 800.410962] start_kernel+0x5e8/0x790
[ 800.414616] __primary_switched+0x80/0x90
[ 800.418622] Code: 8b170277 8b160296 11000421 b9000861 (b9401ac1)
[ 800.424707] ---[ end trace 0000000000000000 ]---
[ 800.457313] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
This issue happens when the file descriptor is closed before the jobs
submitted by it are completed. When the job completes, we update the
global GPU stats and the per-fd GPU stats, which are exposed through
fdinfo. If the file descriptor was closed, then the struct `v3d_file_priv`
and its stats were already freed and we can't update the per-fd stats.
Therefore, if the file descriptor was already closed, don't u
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: clear the dst when changing skb protocol
A not-so-careful NAT46 BPF program can crash the kernel
if it indiscriminately flips ingress packets from v4 to v6:
BUG: kernel NULL pointer dereference, address: 0000000000000000
ip6_rcv_core (net/ipv6/ip6_input.c:190:20)
ipv6_rcv (net/ipv6/ip6_input.c:306:8)
process_backlog (net/core/dev.c:6186:4)
napi_poll (net/core/dev.c:6906:9)
net_rx_action (net/core/dev.c:7028:13)
do_softirq (kernel/softirq.c:462:3)
netif_rx (net/core/dev.c:5326:3)
dev_loopback_xmit (net/core/dev.c:4015:2)
ip_mc_finish_output (net/ipv4/ip_output.c:363:8)
NF_HOOK (./include/linux/netfilter.h:314:9)
ip_mc_output (net/ipv4/ip_output.c:400:5)
dst_output (./include/net/dst.h:459:9)
ip_local_out (net/ipv4/ip_output.c:130:9)
ip_send_skb (net/ipv4/ip_output.c:1496:8)
udp_send_skb (net/ipv4/udp.c:1040:8)
udp_sendmsg (net/ipv4/udp.c:1328:10)
The output interface has a 4->6 program attached at ingress.
We try to loop the multicast skb back to the sending socket.
Ingress BPF runs as part of netif_rx(), pushes a valid v6 hdr
and changes skb->protocol to v6. We enter ip6_rcv_core which
tries to use skb_dst(). But the dst is still an IPv4 one left
after IPv4 mcast output.
Clear the dst in all BPF helpers which change the protocol.
Try to preserve metadata dsts, those may carry non-routing
metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix NULL access in assign channel context handler
Currently, when ath12k_mac_assign_vif_to_vdev() fails, the radio handle
(ar) gets accessed from the link VIF handle (arvif) for debug logging, This
is incorrect. In the fail scenario, radio handle is NULL. Fix the NULL
access, avoid radio handle access by moving to the hardware debug logging
helper function (ath12k_hw_warn).
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: pci: configure manual DAC mode via PCI config API only
To support 36-bit DMA, configure chip proprietary bit via PCI config API
or chip DBI interface. However, the PCI device mmap isn't set yet and
the DBI is also inaccessible via mmap, so only if the bit can be accessible
via PCI config API, chip can support 36-bit DMA. Otherwise, fallback to
32-bit DMA.
With NULL mmap address, kernel throws trace:
BUG: unable to handle page fault for address: 0000000000001090
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 1 UID: 0 PID: 71 Comm: irq/26-pciehp Tainted: G OE 6.14.2-061402-generic #202504101348
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
RIP: 0010:rtw89_pci_ops_write16+0x12/0x30 [rtw89_pci]
RSP: 0018:ffffb0ffc0acf9d8 EFLAGS: 00010206
RAX: ffffffffc158f9c0 RBX: ffff94865e702020 RCX: 0000000000000000
RDX: 0000000000000718 RSI: 0000000000001090 RDI: ffff94865e702020
RBP: ffffb0ffc0acf9d8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000015
R13: 0000000000000719 R14: ffffb0ffc0acfa1f R15: ffffffffc1813060
FS: 0000000000000000(0000) GS:ffff9486f3480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000001090 CR3: 0000000090440001 CR4: 00000000000626f0
Call Trace:
<TASK>
rtw89_pci_read_config_byte+0x6d/0x120 [rtw89_pci]
rtw89_pci_cfg_dac+0x5b/0xb0 [rtw89_pci]
rtw89_pci_probe+0xa96/0xbd0 [rtw89_pci]
? __pfx___device_attach_driver+0x10/0x10
? __pfx___device_attach_driver+0x10/0x10
local_pci_probe+0x47/0xa0
pci_call_probe+0x5d/0x190
pci_device_probe+0xa7/0x160
really_probe+0xf9/0x370
? pm_runtime_barrier+0x55/0xa0
__driver_probe_device+0x8c/0x140
driver_probe_device+0x24/0xd0
__device_attach_driver+0xcd/0x170
bus_for_each_drv+0x99/0x100
__device_attach+0xb4/0x1d0
device_attach+0x10/0x20
pci_bus_add_device+0x59/0x90
pci_bus_add_devices+0x31/0x80
pciehp_configure_device+0xaa/0x170
pciehp_enable_slot+0xd6/0x240
pciehp_handle_presence_or_link_change+0xf1/0x180
pciehp_ist+0x162/0x1c0
irq_thread_fn+0x24/0x70
irq_thread+0xef/0x1c0
? __pfx_irq_thread_fn+0x10/0x10
? __pfx_irq_thread_dtor+0x10/0x10
? __pfx_irq_thread+0x10/0x10
kthread+0xfc/0x230
? __pfx_kthread+0x10/0x10
ret_from_fork+0x47/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
misc: tps6594-pfsm: Add NULL pointer check in tps6594_pfsm_probe()
The returned value, pfsm->miscdev.name, from devm_kasprintf()
could be NULL.
A pointer check is added to prevent potential NULL pointer dereference.
This is similar to the fix in commit 3027e7b15b02
("ice: Fix some null pointer dereference issues in ice_ptp.c").
This issue is found by our static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmem: zynqmp_nvmem: unbreak driver after cleanup
Commit 29be47fcd6a0 ("nvmem: zynqmp_nvmem: zynqmp_nvmem_probe cleanup")
changed the driver to expect the device pointer to be passed as the
"context", but in nvmem the context parameter comes from nvmem_config.priv
which is never set - Leading to null pointer exceptions when the device is
accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8195: Set ETDM1/2 IN/OUT to COMP_DUMMY()
ETDM2_IN_BE and ETDM1_OUT_BE are defined as COMP_EMPTY(),
in the case the codec dai_name will be null.
Avoid a crash if the device tree is not assigning a codec
to these links.
[ 1.179936] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 1.181065] Mem abort info:
[ 1.181420] ESR = 0x0000000096000004
[ 1.181892] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1.182576] SET = 0, FnV = 0
[ 1.182964] EA = 0, S1PTW = 0
[ 1.183367] FSC = 0x04: level 0 translation fault
[ 1.183983] Data abort info:
[ 1.184406] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 1.185097] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 1.185766] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 1.186439] [0000000000000000] user address but active_mm is swapper
[ 1.187239] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 1.188029] Modules linked in:
[ 1.188420] CPU: 7 UID: 0 PID: 70 Comm: kworker/u32:1 Not tainted 6.14.0-rc4-next-20250226+ #85
[ 1.189515] Hardware name: Radxa NIO 12L (DT)
[ 1.190065] Workqueue: events_unbound deferred_probe_work_func
[ 1.190808] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1.191683] pc : __pi_strcmp+0x24/0x140
[ 1.192170] lr : mt8195_mt6359_soc_card_probe+0x224/0x7b0
[ 1.192854] sp : ffff800083473970
[ 1.193271] x29: ffff800083473a10 x28: 0000000000001008 x27: 0000000000000002
[ 1.194168] x26: ffff800082408960 x25: ffff800082417db0 x24: ffff800082417d88
[ 1.195065] x23: 000000000000001e x22: ffff800082dbf480 x21: ffff800082dc07b8
[ 1.195961] x20: 0000000000000000 x19: 0000000000000013 x18: 00000000ffffffff
[ 1.196858] x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000006
[ 1.197755] x14: ffff800082407af0 x13: 6e6f69737265766e x12: 692d6b636f6c6374
[ 1.198651] x11: 0000000000000002 x10: ffff80008240b920 x9 : 0000000000000018
[ 1.199547] x8 : 0101010101010101 x7 : 0000000000000000 x6 : 0000000000000000
[ 1.200443] x5 : 0000000000000000 x4 : 8080808080000000 x3 : 303933383978616d
[ 1.201339] x2 : 0000000000000000 x1 : ffff80008240b920 x0 : 0000000000000000
[ 1.202236] Call trace:
[ 1.202545] __pi_strcmp+0x24/0x140 (P)
[ 1.203029] mtk_soundcard_common_probe+0x3bc/0x5b8
[ 1.203644] platform_probe+0x70/0xe8
[ 1.204106] really_probe+0xc8/0x3a0
[ 1.204556] __driver_probe_device+0x84/0x160
[ 1.205104] driver_probe_device+0x44/0x130
[ 1.205630] __device_attach_driver+0xc4/0x170
[ 1.206189] bus_for_each_drv+0x8c/0xf8
[ 1.206672] __device_attach+0xa8/0x1c8
[ 1.207155] device_initial_probe+0x1c/0x30
[ 1.207681] bus_probe_device+0xb0/0xc0
[ 1.208165] deferred_probe_work_func+0xa4/0x100
[ 1.208747] process_one_work+0x158/0x3e0
[ 1.209254] worker_thread+0x2c4/0x3e8
[ 1.209727] kthread+0x134/0x1f0
[ 1.210136] ret_from_fork+0x10/0x20
[ 1.210589] Code: 54000401 b50002c6 d503201f f86a6803 (f8408402)
[ 1.211355] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
Input: cs40l50-vibra - fix potential NULL dereference in cs40l50_upload_owt()
The cs40l50_upload_owt() function allocates memory via kmalloc()
without checking for allocation failure, which could lead to a
NULL pointer dereference.
Return -ENOMEM in case allocation fails. |
| A NULL pointer dereference vulnerability was discovered in radare2 6.0.5 and earlier within the load() function of bin_dyldcache.c. Processing a crafted file can cause a segmentation fault and crash the program. |
