| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A heap use-after-free flaw was found in Gnumeric. When a user opens a crafted Gnumeric workbook containing a malformed SheetObjectComponent element, the XML parser can dereference a freed sheet-object component, causing Gnumeric to crash. |
| OpenEye Apex Network Video Recorder (NVR) firmware 3.2.9.376 contains an OS command injection vulnerability in recbackup. An authenticated administrator can supply crafted backup-area configuration input that is passed to a shell command, allowing commands to execute with the privileges of the nvr user. The underlying design has been present since at least firmware 2.2.3.4.
This vulnerability is resolved in OpenEye Apex version 3.4.3. |
| The Onion module in AIL Framework contained a performance shortcut in its URL extraction logic that accepted URLs as valid .onion targets based solely on a length check (exactly 69 characters) and a suffix check (ending in ".onion"), without performing proper hostname parsing or onion-domain validation. An unauthenticated attacker who could publish or control web content crawled by the framework could embed a crafted URL containing an IP address or non-onion hostname with a path ending in ".onion" that satisfied the length and suffix conditions. Such a URL would be extracted, its domain naively sliced from the string, and queued as a legitimate onion crawler task. This allowed unauthenticated content publishers to inject arbitrary non-onion targets into the crawler's task queue, influencing crawler behavior and potentially directing it toward unintended network resources. The vulnerability required no authentication, no user interaction, and only the ability to place crafted content in a location the framework would crawl. The security impact is a loss of integrity in the crawler's target selection: the framework processes and acts upon URLs that do not correspond to legitimate .onion services. |
| vm2 through 3.11.6 does not normalize `node:`-prefixed builtin specifiers when evaluating user-supplied negative (deny) entries in a NodeVM wildcard require policy. Although NodeVM strips the `node:` prefix during require() resolution, negative wildcard entries are matched by exact string comparison against the canonical builtin names, so a policy such as `new NodeVM({ require: { builtin: ['*', '-node:child_process'] } })` fails to deny the canonical `child_process` module. Sandboxed code can therefore obtain the host `child_process` builtin via `require('child_process')` or `require('node:child_process')`, gaining references to process-spawning APIs such as execSync and spawn, which is equivalent to host command-execution capability for untrusted sandbox code. Fixed in vm2 3.11.7. |
| vm2 is a sandbox library for running untrusted JavaScript in Node.js. In versions >= 3.10.0 and <= 3.11.7, Promises returned from the host realm into the sandbox are not marked as handled at the bridge boundary; only Promises created inside the sandbox are wrapped with a rejection-swallowing handler (lib/setup-sandbox.js), and the bridge only installs host-side rejection sanitizers when sandbox code calls .then/.catch/.finally. As a result, code running in the sandbox can invoke a host function that returns a rejected Promise (for example events.once() exposed via the NodeVM events builtin, or any embedder-provided Promise-returning API) and simply ignore the return value, leaving the host Promise unhandled so that Node.js's default unhandled-rejection behavior terminates the host process. This is an incomplete fix of GHSA-hw58-p9xv-2mjh. The issue is fixed in version 3.11.8. |
| PLANET IGS-5225-8P2T4S industrial managed switch V1 and V2 firmware versions before 1.2412b260707 and 2.2412b260519 contain a stack-based buffer overflow in the web server. Insufficient bounds checking on data copied into a stack buffer allows a remote administrator to cause a denial of service or potentially execute arbitrary code on the underlying operating system. |
| ClipBucket v5 before 5.5.3-#182 contains a file upload vulnerability that allows authenticated users to achieve remote code execution by uploading a PHP file with valid image magic bytes through the photo upload endpoint. The FileUpload::manageFile() function in fileupload.class.php fails to update the file extension after MIME validation, allowing an attacker-controlled .php extension to persist on disk and execute as PHP via PHP-FPM when the uploaded file is retrieved. |
| Grav before 2.0.25 ships web server configuration samples whose access-control deny rules are matched case-sensitively. In webserver-configs/web.config (IIS), every deny rule (user_sensitive_folders, user_accounts, user_data, user_error_redirect, user_pages, system, vendor, ignore_folders) sets ignoreCase="false" on its URL Rewrite <match> element, overriding the IIS default of ignoreCase="true"; because these are rewrite matches rather than <requestFiltering> elements, there is no case-insensitive fallback. On IIS running over case-insensitive NTFS, an unauthenticated remote attacker can vary the case of a folder name or file extension (for example GET /user/CONFIG/system.YAML) so that no deny rule matches and the IIS static file handler resolves and returns the underlying file, disclosing sensitive data such as configuration secrets or account password hashes. Whether a bypassed file is actually returned depends on MIME registration: .json is served by default, while .yaml/.yml return HTTP 404.3 on a stock IIS unless a YAML MIME mapping has been added. The same class of gap exists in the bundled webserver-configs/lighttpd.conf, whose user/(config|env), directory, script-extension, root-file and dotfile rules lack the (?i) modifier, though it is lower risk because lighttpd typically runs on case-sensitive filesystems. Deployments served by Apache (.htaccess), nginx, Caddy, or the PHP built-in server are not affected. The issue is fixed in 2.0.25; because the .htaccess installer heal does not touch web.config or lighttpd.conf, operators must re-copy the corrected sample files after upgrading. |
| SiYuan before v3.8.4 does not HTML-escape stored flashcard block content before interpolating it into the card-manager list markup. Block content returned by /api/riff/getRiffCards is inserted into a card item template in app/src/card/viewCards.ts and assigned to listElement.innerHTML, so content such as <img src=invalid onerror=...> becomes an executable event-handler attribute. Because the SiYuan desktop (Electron) main window is created with nodeIntegration enabled and contextIsolation disabled, an administrator who opens the card manager on a workspace containing attacker-supplied flashcard content (for example introduced through contribution or import) executes the attacker's script in a privileged renderer, which can lead to arbitrary code execution on the host. The affected endpoint remains behind authentication and administrator-role checks; this is an untrusted-content-to-privileged-renderer issue, not an authorization bypass. |
| Flowise through 3.1.4 does not enforce authorization on the BullMQ admin dashboard. When the server runs in queue mode with the dashboard enabled and not in cloud mode (MODE=queue, ENABLE_BULLMQ_DASHBOARD=true, and !isCloud()), the /admin/queues mount is protected only by the verifyTokenForBullMQDashboard middleware, which validates the JWT but performs no role, permission, or workspace/organization scoping check; the mount also lies outside /api/v1/* so the global API gate does not apply. As a result, any authenticated user — including the lowest-privileged member of any tenant — can reach the full Bull-Board UI and view all queues and job payloads across the entire instance, including chat inputs and overrideConfig (which may carry credentials and prompts), chatflow.flowData graph definitions with custom function source code, credential IDs and system prompts, chatIds, files, and the originating orgId/workspaceId. The dashboard's write actions (retry, remove, promote, clean) are likewise usable across tenants. No patched version is available as of the advisory. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: restore the XDP program pointer when pre-allocation fails
mana_xdp_set() publishes the new program into apc->bpf_prog before it
allocates anything, because mana_pre_alloc_rxbufs() sizes the buffers
from it via mana_get_rxbuf_cfg(). When that allocation fails the
function returns the error directly, skipping the err_dealloc_rxbuffs
label which is the only place that restores the previous pointer.
The attach is reported as failed, so the BPF core drops the reference it
held for the caller and the program can be freed, while apc->bpf_prog
still points at it. The next consumer of mana_xdp_get() - typically
mana_chn_setxdp() from mana_alloc_queues() on the following ifup, or
after a TX timeout reset - then calls bpf_prog_add() on freed memory.
This is reachable from an ordinary "ip link set dev ethX xdp obj ..."
whenever the per-queue RX buffer pre-allocation cannot be satisfied.
Restore the previous program on that error path. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: initialize _md in vxlan_xmit_one()
If a VXLAN device is configured with both VXLAN_F_COLLECT_METADATA and
VXLAN_F_GBP, and a packet is transmitted through it using an external
ip_tunnel_info that lacks the IP_TUNNEL_VXLAN_OPT_BIT flag, md is left
pointing to the uninitialized _md stack variable:
if (test_bit(IP_TUNNEL_VXLAN_OPT_BIT, info->key.tun_flags)) {
if (info->options_len < sizeof(*md))
goto drop;
md = ip_tunnel_info_opts(info);
}
Because IP_TUNNEL_VXLAN_OPT_BIT is not set, md is not updated and remains
pointing to _md. Later, vxlan_build_skb() is called with md, which
eventually calls vxlan_build_gbp_hdr():
if (vxflags & VXLAN_F_GBP)
vxlan_build_gbp_hdr(vxh, md);
Inside vxlan_build_gbp_hdr(), md->gbp is read:
if (!md->gbp)
return;
gbp = (struct vxlanhdr_gbp *)vxh;
...
if (md->gbp & VXLAN_GBP_DONT_LEARN)
gbp->dont_learn = 1;
If the stack contains garbage, this causes:
1) VXLAN_HF_GBP flag to be spuriously set in the VXLAN header.
2) gbp->dont_learn and gbp->policy_applied to be set from stack bits.
3) gbp->policy_id to receive 16 bits of uninitialized kernel stack data,
leaking it onto the wire.
Fix this by zero-initializing _md. If IP_TUNNEL_VXLAN_OPT_BIT is not
present, md->gbp remains 0, and vxlan_build_gbp_hdr() returns early
without modifying the VXLAN header. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: null-check fib6_node before accessing in __ip6_del_rt_siblings()
syzbot reported a null-ptr-deref in __ip6_del_rt_siblings() [0].
The stack trace hinted towards a null dereference of rt->fib6_node when
fn->leaf is accessed in __ip6_del_rt_siblings(). With
RTNL_FLAG_DOIT_UNLOCKED set, inet6_rtm_delroute() operations run
concurrently without acquiring the RTNL lock. In ip6_route_del(), the
route lookup happens under rcu_read_lock() without acquiring
table->tb6_lock.
Between ip6_route_del() looking up the route and __ip6_del_rt_siblings()
acquiring table->tb6_lock, another thread can modify the routing table.
For example, when an ECMP route is replaced via RTM_NEWROUTE with
NLM_F_REPLACE, fib6_add_rt2node() unlinks all old siblings and sets
iter->fib6_node = NULL. A reproducer was found that triggers this [1].
Add a check to ensure rt->fib6_node is non-null before accessing it.
[0]
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
RIP: 0010:__ip6_del_rt_siblings+0x31e/0x7c0 net/ipv6/route.c:4056
Call Trace:
<TASK>
ip6_route_del+0x1054/0x1110 net/ipv6/route.c:4232
inet6_rtm_delroute+0x5d7/0x6d0 net/ipv6/route.c:5669
rtnetlink_rcv_msg+0x802/0xc00 net/core/rtnetlink.c:7132
netlink_rcv_skb+0x226/0x4a0 net/netlink/af_netlink.c:2556
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x7f5/0x990 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1900
sock_sendmsg_nosec+0x13a/0x180 net/socket.c:800
__sock_sendmsg net/socket.c:815 [inline]
____sys_sendmsg+0x565/0x870 net/socket.c:2713
___sys_sendmsg+0x2a5/0x360 net/socket.c:2767
__sys_sendmsg net/socket.c:2799 [inline]
__do_sys_sendmsg net/socket.c:2804 [inline]
__se_sys_sendmsg net/socket.c:2802 [inline]
__x64_sys_sendmsg+0x1b7/0x290 net/socket.c:2802
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
[1] https://gist.github.com/NamanGulati/0766a1159b6ca61928faaf87425ff899 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: Fix potential double-free at error path
The fix for caiaq driver's resource management to handle the errors
tries to release the resources in a common destructor call, but as a
sashiko review for another patch suggested, some of the audio
resources such as URBs have been already freed, and this may lead to a
double-free.
For addressing the double-free, call the common destructor function
from each place, and assure that the resource pointers get cleared. |
| The AIL Framework (ail-project/ail-framework) contains a stored cross-site scripting (XSS) vulnerability in two Jinja2 templates that render popovers for matched, tracked, or tagged content: var/www/templates/chats_explorer/block_message.html and var/www/templates/objects/item/show_item.html. In both templates, dynamic values associated with this content, including icon color, icon style, icon glyph, subtype, identifier, name, description, and matched value, are interpolated directly into the data-content HTML attribute of Bootstrap popover elements without appropriate output encoding. Because the popovers are configured with data-html="true", the content is interpreted as HTML in the victim's browser. An authenticated attacker who can influence matched, tracked, or tagged content may inject arbitrary HTML or JavaScript into these values. When a victim displays the affected popover, the injected markup may execute in the victim's session, potentially enabling data exfiltration or actions with the victim's privileges. The vulnerability is classified as stored XSS because the malicious payload can persist in the affected match, tracking, or tag-related data and be delivered to users who view the affected content. |
| The AIL Framework crawler splash domain page (showDomain.html) is vulnerable to stored cross-site script injection (XSS). User-supplied data originating from imported crawler captures—specifically item IDs, URLs, and screenshot file paths—was interpolated directly into inline JavaScript contexts within the HTML template. This included an onclick attribute that embedded raw screenshot and URL values into a JavaScript function call, and an inline script block that assigned a screenshot value to a JavaScript variable without escaping. An attacker with a user-role API client could craft a malicious crawler capture import containing JavaScript payloads in these fields. When any user (including privileged users) subsequently viewed the affected domain page, the injected script would execute in the victim's browser context, potentially allowing session hijacking, data exfiltration, or unauthorized actions on behalf of the victim. The vulnerability is stored in the application's data layer and triggered upon page rendering, requiring no further interaction beyond loading the domain view. |
| Improper Exposure of Resource to Wrong Sphere in the host file helper (gofer) in Google gVisor prior to commit 573a9e73cf844f on Linux platforms with CUSE enabled allows a local attacker with container image deployment privileges to achieve root code execution on the host system. By including a /dev/cuse character device node in a container image, opening the device passes through to the host, allowing the sandboxed attacker to register a host device and exploit CUSE unrestricted ioctl handling to overwrite root udev helper memory. |
| A vulnerability has been found in Zhonglun CloudPos up to 3.0.1.76. This issue affects the function OpenLocalBrowser of the file ZlPos/ZlPos/Bizlogic/JSBridge.cs of the component JSBridge. Such manipulation of the argument url leads to code injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Improper Neutralization of Special Elements in Output Used by a Downstream Component in the colour control escape code handler in kitty from 0.47.3 before 0.49.0 allows a program writing to the terminal to execute an arbitrary command in the user's shell, because color_control() in kitty/window.py answers a query for an unrecognised field name by placing that field name into the reply, and write_escape_code_to_child() in kitty/screen.c then writes the reply to the pseudoterminal master, where it is not distinguishable from input typed by the user, without neutralising it for the shell that reads it. The payload is reduced to printable ASCII before the field name is echoed, which is the restriction introduced in 0.47.3 as the fix for CVE-2026-54057, and the record and field separators ; and = are consumed as delimiters, but every other printable character survives, which is sufficient to compose a shell command. A newline is available from handle_remote_ssh() in kitty/window.py, which writes the bytes yielded by get_ssh_data() in kittens/ssh/utils.py, the first of which begin with a newline, to the pseudoterminal master before any credential carried in the request is checked. The reply is framed as an OSC sequence carrying the escape code number, the field name, and the literal value ?. This results in execution of an attacker-chosen command with the privileges of the user running the terminal. |
| Improper Link Resolution Before File Access in the drag source staging path of the drag and drop protocol in kitty from 0.47.0 before 0.49.0 allows a program writing to the terminal to create files and directories at paths outside the staging directory, because subdir_data_for_drag() in kitty/dnd.c resolves a descendant of the staged item tree by constructing a path string and opening it with safe_open(path, O_DIRECTORY | O_RDONLY, 0) rather than by walking the tree one component at a time, so a client that declares two entries with the same name, the first a symlink whose target is an arbitrary absolute path and the second a directory, causes mkdirat() to fail with EEXIST, which the code ignores, and causes the subsequent path resolution to follow the symlink and return a directory descriptor outside the staging directory, which is then passed as the dirfd argument to add_payload() and used for every further create operation on that item and its descendants. Entry names are sanitised against path separators and dot components, but symlink targets are not validated. Files are created with O_CREAT | O_WRONLY | O_EXCL at mode 0644, so existing files cannot be overwritten, and directories are created with mkdirat() at mode 0755, so the attacker can create intermediate directories that did not previously exist. This results in the creation of files and directories at any path writable by the user running kitty, provided the symlink target is an existing directory. |
